TimeGuard TGBT6 Boostmaster 2 Hour Plug-In Electronic Boost Timer Box Contains1 x boost timer
_13A (3kW) loading
_Plug-in 2 hour boost timer
_Easy to use push button control
_ON time can be increased in 4 steps: 0.25, 0.50, 1 and 2 hours
_Timer Mode: Boost
The TGBT4N from Timeguard is an electronic timer that has automatic timed countdown selections for up to 4 hours using a simple pish button, making them completely effortless. The timer is suitable for immersion, heaters, room heaters, towel rails and lighting (not suitable for discharge lighting). The timer features boost times of 1/4 hour, 1/2 hour, 1, 2 and 4 hours. The timer also has and LED indicator to show when the power is on. The timer has normally open contacts and requires a wall box with a minimum depth of 25mm. 3 Year Manufacturer Guarantee.
_Automatic timer countdown selection for up to 4 hours in quarter hour steps
_Typical applications such as immersion heaters, room heaters, towel rails and lighting
_Fits a standard flush or surface mount BS wall box min. 25mm deep. Optional flex outlet located underside left hand side
_Maximum load 3000 watts (resistive), 1000 watts (filament), 500W fluorescent, 100W CFL or LED. CE approved
_Dimensions: 87mm wide x 87mm high x 22mm deep. 10mm rear projection
Plug-in control for 13 amp (3kW) heating appliances Filament lighting to 400W CFL lighting to 100W & LED lighting to 60WBox Contains1 x RCD White Fused Connection Unit Socket
_Plug-in control for 13 amp (3kW) heating appliances Filament lighting to 400W CFL lighting to 100W & LED lighting to 60W
_15 minute minimum switching interval which can be increased 15 minute steps
_Permanent ON override for instant control
_Easy to use segment setting dial
_Timer Mode 24 Hour
TimeGuard PDWM1500 Wall Mount PIR Presence Detector Box Contains1 x 120 Wall Mount PIR Presence Detector
_Ideal for energy saving installations in the workplace, corridors, offices, toilets etc
_Enhanced 120 detection zone for optimum coverage
_Switches lights ON when presence is detected and to light level (LUX) settings
TimeGuard PDFM1500 Ceiling PIR Presence DetectorBox Contains1 x PIR Presence Detector
_Ideal for energy saving installations in the workplace, corridors, offices, toilets etc
_IP44 environmental rating (internal use only)
_Requires a 63mm or 64mm diameter installation hole cut-out
TimeGuard PDRS1500 Surface Mount Round PIR Presence Detector
_Switches lights ON when presence and motion is detected in combination with light levels (LUX adjustment) pre-set by user
_Enhanced 360 degree detection zone for optimum coverage
_Up to 10m detection range for motion and 3m for presence detection at 3m mounting height.
_User-friendly adjustment for: Time ON - 1 to 30 minutes; Light Level - 5 to 1000 LUX
_Units can be wired in parallel (not exceeding total load).
96 quick-set segments for up to 48 ON/48 OFF programmes Box Contains1 x Slimline General Purpose Timeswitch
_96 quick-set segments for up to 48 ON/48 OFF programmes
_16(8)A load rating
_Switches up to 750W incandescent or halogen lighting/750W fluorescent lighting/100W compact fluorescent lighting (cflÕs). Not suitable for discharge lighting
_Red LED ÔMains ONÕ and green LED ÔOutputÕ indicators for easy viewing
_Special ÔTraffic LightÕ slider switch for easy ON (green), Auto (green & red) and OFF (red) mode indication
4 ON/4 OFF easy-set programme periods per day, 28 ON/28 OFF programmes per weekBox Contains1 x Electronic General Purpose Timeswitch with Voltage Free Contacts
_4 ON/4 OFF easy-set programme periods per day, 28 ON/28 OFF programmes per week
_16(4)A load rating
_Shortest switching time 1 minute
_Red LED ÔMains ONÕ and green LED ÔOutputÕ indicators for easy viewing
_Switches up to 750W incandescent or halogen lighting/750W fluorescent lighting/100W compact fluorescent lighting (cflÕs)/100W LED lighting. Not suitable for discharge lighting
The NTT02 from Timeguard is compact and easy to use with 96 quick set segments of 15 minutes each, giving you up to 48 ON/48 OFF programmes. It is a general purpose timer suitable not only for controlling immersion heaters (it has a 16A load rating) but it will also switch up to 750W of a variety of lighting (not suitable for discharge lighting). Box Contains1 x General Purpose Timeswitch
_96 quick-set segments for up to 48 ON/48 OFF programmes
_16(8)A load rating
_Red LED ÔMains ONÕ indicator for easy viewing
_Special ÔTraffic LightÕ slider switch for easy ON (green) Auto (green & red) and OFF (red) mode indication
_Switches up to 750W incandescent or halogen lighting/750W fluorescent lighting/100W compact fluorescent lighting (cflÕs) Not suitable for discharge lighting
Fused spur time switch 24 hour contact current max - 13A contact style - - Controller output - digital SVHC - no SVHC (15-jun-2015) time Max - 24H external depth - 38mm External Length/ height - 85mm External width - 85mm Operating temperature max - 40¡C operating temperature min - 0¡C supply voltage Max - 230V
_Manufacturer name: time guard
_Model No: BPSCA FST24 - PL14941
TimeGuard ETU17 24 Hour 7 Day Slimline Digital Time Controller Box Contains1 x Slimline Digital Plug-In Time Controller
_Top side display for ease of viewing when in use
_Simple two button programming
_1000 hours rechargeable memory back-up
