PIR CONTROLLER 360o SURFBox Contains1 x 360 Surface Mount
_PIR, 360 DEG, SURFACE MOUNT, CEILING SLW360 By TIMEGUARD
_Manufacturer Name: TIMEGUARD
_Manufacturer Part No: SLW360
Timeguard PDSM1500 Enhanced PIR Occupancy Sensor Box Contains1 x PIR Presence Detector
_Ideal for energy saving installations in the workplace, corridors, offices, toilets etc
_Enhanced 360 detection zone for optimum coverage
_Up to 10m detection range for motion and 3m for presence detection at 3m mounting height
This mechanical immersion timer from Timeguard has been specially designed for installation with both new and existing immersion heater systems.
_Up to 24 On and Off programs (additional pins required)
_Self cancelling override for instant On/Off switching
_For total control of your hot water
_Switches On and Off at preset times
_Easy to use setting pins
Interchangeable with Sangamo and Horstmann Economy 7 units.Suitable for use with single, dual or twin element immersion heaters. Designed for use with Economy 7 off peak rate overnight electricity plans.
_Timer mode: 24 Hour + Boost
_Boost duration: 30, 60 or 120 minutes
_Switch type: Double Pole Rocker Switch
_Maximum permissible loads: 13A Resistive, suitable for immersion heaters up to 3kW
_IP rating: IP30
TimeGuard TRT05 Electronic Thermostat With 24 Hour Time Control
_3 ON/3 OFF easy-set programmable time periods repeated over 24 hours
_Plug-in, no wiring
_Integral temperature sensor with 0¡ - 35¡C temperature range
_1000 hours integral battery power reserve retains programmes and allows out of socket programming
_Reset button restores to factory set default programmes
TimeGuard 7 Day Digital Programmer
_Timer mode: 7 Day + Boost
_Boost duration: 1, 2 or 3 Hours
_Current rating: 3 (1) A
_Switch type: Single Pole, Double Throw (SPDT)
_Operating temperature range: 0 degree C to 50 degree C
TimeGuard PIR Sensor PDFMMINILS
_Unique twist & lock body.
_Up to 5 plug & play slave units can be added.
_Ideal for corridors.
_Presence detection.
_Pre-installed 5m lead
28 ON/28 OFF easy-set programme periods per week Box Contains1 x Electronic General Purpose Timeswitch
_28 ON/28 OFF easy-set programme periods per week
_16(4)A load rating
_Shortest switching time 1 minute
_Switches up to 750W incandescent or halogen lighting/750W fluorescent lighting/100W compact fluorescent lighting (cflÕs)/100W LED lighting Not suitable for discharge lighting
_Extra large ÔEasy ViewÕ screen with blue LED backlighting
The NTT06 from Timeguard is an electronic programmable 24 hour timer. It has a slim profile and is a general purpose timer suitable not only for controlling immersion heaters (it has a 16A load rating) but it will also switch up to 750W of a variety of lighting including LED (not suitable for discharge lighting). Box Contains1 x Electronic General Purpose Timeswitch
_4 ON/4 OFF easy-set programme periods per day
_16(4)A load rating
_Shortest switching time 1 minute
_Switches up to 750W incandescent or halogen lighting/750W fluorescent lighting/100W compact fluorescent lighting (cflÕs)/100W LED lighting Not suitable for discharge lighting
_Extra large ÔEasy ViewÕ screen with blue LED backlighting
&Nbsp; operating instructions (596.52KB) EN contact current max: 16A contact style: - Controller output: Digital SVHC: no SVHC (17-dec-2014) time Max: 168H MSL: - Box Contains1 x Electronic Immersion Heater Timeswitch
_4 on/4 off easy-set programme periods per day, 28 on/28 off programmes per week
_Extra large 'easy view' Screen with blue LED backlighting
_Red LED 'mains on' And green LED 'output' Indicators for easy viewing
_16(4)A load rating
Automatically Counts-Down Selected Time Period
_Automatically Counts-Down Selected Time Period
_Up To 4 Times Can Be Selected 15mins 30mins 1 hr & 2hrs
_Ideal For Immersion & Room Heaters Automatically Switching Off At End Of Time Period
_Control Heating / Lighting And Save Energy & Money
_Easy Push Button Selection With Clear LED Output Status
TimeGuard Electronic IP65 Time Delay Switch Box Contains1 x Boostmaster IP65 Time Delay Switch
_Max.Filament load: 4kW
_Low voltage lighting: 20 - 200W
_Stand-alone LED rating: 150W
_Adjustable time delay: 2 minutes to 3 hours
_Operating temperature: -10 degree C to 40 degree C
Timeguard Compact Plug-In Time Controller,Plug-in control for 13 amp appliances and filament lamps up to 400W,Switches appliances ON & OFF at preset times,Easy to use setting pins,30 minute minimum switching interval which can be increased in 15 minute steps,Up to 24 ON & OFF programmes per day,Manual override until next programme change Box Contains1 x Smiths - Time Guard
_Plug-in control for 13 amp (3kW) appliances and filament lamps up to 400W.
_Switches appliances ON & OFF at preset times.
_Easy to use setting pins. 30 minute minimum switching interval which can be increased in 15 minute steps.
_Up to 24 ON & OFF programmes per day (additional pins required).
_Manual override until next programme change.
TimeGuard 7 Day Digital Heating Programmer
_Timer mode: 12 / 24 Hour + Boost
_Boost duration: 1 or 2 Hours
_Number of channels: 3
_Current rating: 3 (1) A
_Operating temperature range: 0 degree C to 40 degree C
TimeGuard 7 Day Digital Heating Programmer
_Timer mode: 7 Day + Boost
_Boost duration: 1, 2 or 3 Hours
_Number of channels: 2
_Current rating: 3 (1) A
_Switch type: Single pole, Double Throw (SPDT) for both Heating and Hot Water
TimeGuard TRT033C Digital Room Thermostat With Night Set-Back
_Stylish design with digital accuracy
_Night set-back reduces set temperature by 4 degree C with 1 - 9 hours recall
_Easy +/- illuminated push button setting
_Easy view temperature display illuminated on setting
_Burner symbol display shows on call for heat
The TGBT4N from Timeguard is an electronic timer that has automatic timed countdown selections for up to 4 hours using a simple pish button, making them completely effortless. The timer is suitable for immersion, heaters, room heaters, towel rails and lighting (not suitable for discharge lighting). The timer features boost times of 1/4 hour, 1/2 hour, 1, 2 and 4 hours. The timer also has and LED indicator to show when the power is on. The timer has normally open contacts and requires a wall box with a minimum depth of 25mm. 3 Year Manufacturer Guarantee.
_Automatic timer countdown selection for up to 4 hours in quarter hour steps
_Typical applications such as immersion heaters, room heaters, towel rails and lighting
_Fits a standard flush or surface mount BS wall box min. 25mm deep. Optional flex outlet located underside left hand side
_Maximum load 3000 watts (resistive), 1000 watts (filament), 500W fluorescent, 100W CFL or LED. CE approved
_Dimensions: 87mm wide x 87mm high x 22mm deep. 10mm rear projection
