The Stanley FatMax® Closed Case Long Tape has a 10mm wide stainless steel blade that resists rusting and has metric only graduations. Its closed case design helps to protect the blade and internal workings and has a non-slip rubber grip. The 3:1 gear ratio provides 3x faster rewind and a steel roller cage protects the case from being cut by the blade during retraction. There is also a corrosion resistant Tru-zero folding end hook for accurate measurements.The Stanley FatMax® Closed Case Steel Long Tape has metric graduations only. Blade Length: 30mBlade Width: 10mmAccuracy: EC Class II
The Stanley FatMax® BladeArmor® Tape has a Mylar® coated steel blade and an impressive stand-out of 3.35m. The Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Available with metric only or metric and imperial graduations.This Stanley FatMax® BladeArmor® Tape has metric graduations only. Blade Length: 10mBlade Width: 32mmAccuracy: EC Class II
The Stanley FatMax® BladeArmor® Tape has a Mylar® coated steel blade and an impressive stand-out of 3.35m. The Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Available with metric only or metric and imperial graduations.This Stanley FatMax® BladeArmor® Tape has metric and imperial graduations. Blade Length: 10m/33ftBlade Width: 32mmAccuracy: EC Class II
The Stanley FatMax® BladeArmor® Tape has a Mylar® coated steel blade and an impressive stand-out of 3.35m. The Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Available with metric only or metric and imperial graduations.This Stanley FatMax® BladeArmor® Tape has metric graduations only. Blade Length: 8mBlade Width: 32mmAccuracy: EC Class II
The Stanley FatMax® BladeArmor® Tape has a Mylar® coated steel blade and an impressive stand-out of 3.35m. The Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Available with metric only or metric and imperial graduations.This Stanley FatMax® BladeArmor® Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 32mmAccuracy: EC Class II
The Stanley FatMax® BladeArmor® Tape has a Mylar® coated steel blade and an impressive stand-out of 3.35m. The Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Available with metric only or metric and imperial graduations.This Stanley FatMax® BladeArmor® Tape has metric graduations only. Blade Length: 5mBlade Width: 32mmAccuracy: EC Class II
The Stanley FatMax® BladeArmor® Tape has a Mylar® coated steel blade and an impressive stand-out of 3.35m. The Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper, to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion resistant, Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade. Available with metric only or metric and imperial graduations.This Stanley FatMax® BladeArmor® Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 32mmAccuracy: EC Class II
The STANLEY FATMAX® Autolock Tape has been designed to be compact. Its ergonomic bi-material case provides increased grip and comfort for ease of use. The Autolock technology ensures the blade feeds out and stops the blade from retracting, whilst the blade can be retracted by simply pressing the button. The Mylar® coated blade offers 10 times more resistance to abrasion and wear compared to a lacquered blade. The tape is highly precise to Class II accuracy and features a Tru-Zero® end hook which moves to compensate for inside and outside measurements, providing an accurate reading. It has a 3m blade stand-out for increased reach and easier measuring. With a detachable hook that allows the user to work efficiently in different conditions. It also includes a secure hook storage, so you won't lose the tape when not in use. FEATURES: - Patented reverse lock mechanism for greater control and increased blade life- BladeArmor® coating on the first 80mm for double the blade life- Mylar® coated blade is up to 10 times more resistant to abrasion than lacquered blades- 32mm Wide blade delivering 3m blade standout for increased reach and easier measuring- 3 Rivet hook is 40% stronger than a 2 rivet hook- Detachable hook allows user to work efficiently in different conditions- Bi-material case for comfort- Includes Detachable magnetic and XL hooks for improved efficiency- Belt clip for additional convenience and accessibility This Stanley FatMax® Autolock Pocket Tape has metric graduations only. Blade Length: 5mBlade Width: 32mmBlade Stand-out: 3mAccuracy: EC Class II
The STANLEY FATMAX® Autolock Tape has been designed to be compact. Its ergonomic bi-material case provides increased grip and comfort for ease of use. The Autolock technology ensures the blade feeds out and stops the blade from retracting, whilst the blade can be retracted by simply pressing the button. The Mylar® coated blade offers 10 times more resistance to abrasion and wear compared to a lacquered blade. The tape is highly precise to Class II accuracy and features a Tru-Zero® end hook which moves to compensate for inside and outside measurements, providing an accurate reading. It has a 3m blade stand-out for increased reach and easier measuring. With a detachable hook that allows the user to work efficiently in different conditions. It also includes a secure hook storage, so you won't lose the tape when not in use. FEATURES: - Patented reverse lock mechanism for greater control and increased blade life- BladeArmor® coating on the first 80mm for double the blade life- Mylar® coated blade is up to 10 times more resistant to abrasion than lacquered blades- 32mm Wide blade delivering 3m blade standout for increased reach and easier measuring- 3 Rivet hook is 40% stronger than a 2 rivet hook- Detachable hook allows user to work efficiently in different conditions- Bi-material case for comfort- Includes Detachable magnetic and XL hooks for improved efficiency- Belt clip for additional convenience and accessibility This Stanley FatMax® Autolock Pocket Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 32mmBlade Stand-out: 3mAccuracy: EC Class II
The STANLEY FATMAX® Autolock Tape has been designed to be compact. Its ergonomic bi-material case provides increased grip and comfort for ease of use. The Autolock technology ensures the blade feeds out and stops the blade from retracting, whilst the blade can be retracted by simply pressing the button. The Mylar® coated blade offers 10 times more resistance to abrasion and wear compared to a lacquered blade. The tape is highly precise to Class II accuracy and features a Tru-Zero® end hook which moves to compensate for inside and outside measurements, providing an accurate reading. It has a 3m blade stand-out for increased reach and easier measuring. With a detachable hook that allows the user to work efficiently in different conditions. It also includes a secure hook storage, so you won't lose the tape when not in use. FEATURES: - Patented reverse lock mechanism for greater control and increased blade life- BladeArmor® coating on the first 80mm for double the blade life- Mylar® coated blade is up to 10 times more resistant to abrasion than lacquered blades- 32mm Wide blade delivering 3m blade standout for increased reach and easier measuring- 3 Rivet hook is 40% stronger than a 2 rivet hook- Detachable hook allows user to work efficiently in different conditions- Bi-material case for comfort- Includes Detachable magnetic and XL hooks for improved efficiency- Belt clip for additional convenience and accessibility This Stanley FatMax® Autolock Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 32mmBlade Stand-out: 3mAccuracy: EC Class II
The STANLEY FATMAX® Autolock Tape has been designed to be compact. Its ergonomic bi-material case provides increased grip and comfort for ease of use. The Autolock technology ensures the blade feeds out and stops the blade from retracting, whilst the blade can be retracted by simply pressing the button. The Mylar® coated blade offers 10 times more resistance to abrasion and wear compared to a lacquered blade. The tape is highly precise to Class II accuracy and features a Tru-Zero® end hook which moves to compensate for inside and outside measurements, providing an accurate reading. It has a 3m blade stand-out for increased reach and easier measuring. With a detachable hook that allows the user to work efficiently in different conditions. It also includes a secure hook storage, so you won't lose the tape when not in use. FEATURES: - Patented reverse lock mechanism for greater control and increased blade life- BladeArmor® coating on the first 80mm for double the blade life- Mylar® coated blade is up to 10 times more resistant to abrasion than lacquered blades- 32mm Wide blade delivering 3m blade standout for increased reach and easier measuring- 3 Rivet hook is 40% stronger than a 2 rivet hook- Detachable hook allows user to work efficiently in different conditions- Bi-material case for comfort- Includes Detachable magnetic and XL hooks for improved efficiency- Belt clip for additional convenience and accessibility This Stanley FatMax® Autolock Pocket Tape has metric graduations only. Blade Length: 8mBlade Width: 32mmBlade Stand-out: 3mAccuracy: EC Class II
The Stanley FatMax® 5-in-1 Hacksaw has a large throat depth and in the standard position is a 90° hacksaw. The blade can be quickly positioned to a 45° angle for making flush cuts. When working in tight spaces, the front section of the frame can be removed like a jabsaw. The blade can also be attached to the front of the hacksaw frame for inside cuts. With blade storage inside frame, meaning spare blades can be kept within easy reach. It has a maximum 150kg tension, making cutting easier.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-267 FatMax® Thru Tang Chisel is 50mm (2 inches) in width and 165mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-265 FatMax® Thru Tang Chisel is 38mm (1 1/2 inches) in width and 165mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-266 FatMax® Thru Tang Chisel is 40mm (1 5/8 inches) in width and 165mm in length.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-264 FatMax® Thru Tang Chisel is 35mm (1.3/8 inch) in width and 155mm in length.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-263 FatMax® Thru Tang Chisel is 32mm (1 1/4 inches) in width and 155mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-262 FatMax® Thru Tang Chisel is 30mm (1 1/8 inches) in width and 155mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-261 FatMax® Thru Tang Chisel is 25mm (1 inch) in width and 155mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-260 FatMax® Thru Tang Chisel is 22mm (7/8 inch) in width and 135mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-259 FatMax® Thru Tang Chisel is 20mm (13/16 inch) in width and 135mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-258 FatMax® Thru Tang Chisel is 18mm (11/16 inches) in width and 135mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-257 FatMax® Thru Tang Chisel is 16mm (5/8 inch) in width and 130mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-256 FatMax® Thru Tang Chisel is 15mm (9/16 inch) in width and 130mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-255 FatMax® Thru Tang Chisel is 14mm (17/32 inch) in width and 125mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-253 FatMax® Thru Tang Chisel is 10mm (3/8 inch) in width and 125mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-254 FatMax® Thru Tang Chisel is 12mm (1/2 inch) in width and 125mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-252 FatMax® Thru Tang Chisel is 8mm (5/16 inch) in width and 125mm in length
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-251 FatMax® Thru Tang Chisel is 6mm (1/4 inch) in width and 125mm in length
The Stanley FatMax® Coping Saw has a hardened tempered blade for long life. The steel back prevents bending providing strong, true, straight cuts. The frame depth is greater than most coping saws, 170mm (6.3/4in). This saw is supplied complete with 3 spare blades.
The Stanley FatMax® Carbide Snap-Off Blades last up to 5x longer than conventional blades. They have a sharper, more durable cutting edge, meaning you spend less time changing blades. ONLY a carbide edge allows the rest of the blade to remain flexible (carbide is much more brittle than steel). Available sizes: 18mm and 25mm.1 x Stanley FatMax® Carbide Snap-Off Blades 25mm Pack of 5
The Stanley Tools FatMax® Auto-Retract Squeeze Safety Knife has a pressure-sensitive blade that automatically retracts once disengaged from the cutting surface. An easy squeeze trigger exposes the blade and helps reduce user strain. A blade lock helps prevent accidental blade exposure. The knife is fitted with a slip resistant bi-material grip for comfort and control. It offers quick, tool-free blade change. There is also a lanyard hang hole and integrated blade storage in the handle. Ideal cutting solution for corrugate, tape etc. It accepts standard round-point utility blades.
The Stanley Tools FatMax® Auto-Retract Tri-Slide Safety Knife has a pressure-sensitive blade that automatically retracts once disengaged from the cutting surface. The oversized, contoured tri-slide button can be engaged from 3 positions: top, left and right side. There are 3 blade depth settings and a blade lock to help prevent accidental blade exposure. The knife is fitted with a slip resistant bi-material grip for comfort and control. It offers quick, tool-free blade change. There is also a lanyard hang hole and integrated blade storage in the handle. Ideal cutting solution for corrugate, tape etc. It accepts standard round-point utility blades.
The Stanley Tools Essential Toolbox has an innovative design with an internal tool tray and small top organisers in the lid to enable small parts organisation. Fitted with ergonomic metal catches and geometric lock latches for smooth closing and opening. The toolbox can be locked with a small padlock (not supplied) for extra safety and to reduce the risk of theft. Specification: External Dimensions: 66.5 x 33.5 x 28cmInternal Dimensions: 64 x 28 x 22cm
This Stanley Decorating Kit contains all the tools required for your decorating project. Contains the following: 1 x Roller Tray, this unique tray will keep paint fresh for up to 7 days, ideal for working on larger projects. 1 x Soft Grip Roller Frame for added comfort and control. 1 x Superior Microfibre Roller Sleeve for greater paint loading. It offers great all-round performance and coverage for a superior fine smooth finish. It can be used with any water or oil-based paints. 3 x MAXFINISH Advanced Paint Brushes (1 x 25mm (1in) and 2 x 50mm (2in)) with synthetic bristles for longer life and superior paint loading with gradual release. Fine finish with no brush marks and no bristle loss.
This Stanley Seam Roller has a rubber roller head which gives a great finish when smoothing wallpaper seams. It has a soft DynaGrip handle for extra comfort and control.
