The Stanley FatMax® Snap-Off Knife is suitable for heavy-duty cutting. It features a blade wiper to remove excess debris and prolong the life of the blade. It also has a blade locking clamp and spare blades are automatically loaded. A removable blade snapper ensures faster and safer removal of a worn segment. The body has a soft grip, bi-material handle for comfort and control. Available sizes: 9mm, 18mm and 25mm.This Stanley FatMax® Snap-Off Knife 25mm holds up to 4 blades.
The Stanley FatMax® Snap-Off Knife is suitable for heavy-duty cutting. It features a blade wiper to remove excess debris and prolong the life of the blade. It also has a blade locking clamp and spare blades are automatically loaded. A removable blade snapper ensures faster and safer removal of a worn segment. The body has a soft grip, bi-material handle for comfort and control. Available sizes: 9mm, 18mm and 25mm.This Stanley FatMax® Snap-Off Knife 18mm holds up to 6 blades.
The Stanley FatMax® Snap-Off Knife is suitable for heavy-duty cutting. It features a blade wiper to remove excess debris and prolong the life of the blade. It also has a blade locking clamp and spare blades are automatically loaded. A removable blade snapper ensures faster and safer removal of a worn segment. The body has a soft grip, bi-material handle for comfort and control. Available sizes: 9mm, 18mm and 25mm.This Stanley FatMax® Snap-Off Knife 9mm holds up to 6 blades.
The Stanley Tools FatMax® Spring Assist Knife has a 3 position blade mechanism with a redesigned slider that makes the knife smaller than before. Fitted with a bi-material handle grip and rubber thumb pad for added control and comfort. It has an instant blade change mechanism for convenience with an on board blade storage, with 3 blade capacity (supplied). Spring assisted opening via a button for speed and convenience.
The Stanley FatMax® Safety Knife has an 'Autoretract' blade system that retracts the blade as soon as it leaves contact with the cut surface, for increased safety. The knife has a built-in wrap cutter for shrink wrap and a tape splitter for opening boxes. It allows instant blade change and has internal blade storage.
The Stanley Tools FatMax® Floorboard Saw has a comfortable bi-material handle and an ergonomically designed finger rest, useful for extra control when starting a cut. The handle is screwed to the blade and ultrasonically welded for comfort and security. Teeth on the curved end of the blade help to start off a cut in floorboards and they are induction hardened for a longer cutting life. It features 45° and 90° reference points for quick cuts. Specification: Length: 300mm (12in).Teeth: 13 TPI.
Stanley Tools FatMax® Hard Shell Tactical Knee Pads have a semi-rigid construction that offers improved protection. Each knee pad is fitted with a single neoprene strap for a comfortable, secure fit. With a thick layer of EVA high-density foam padding and high memory gel for maximum comfort and a long product life. The outer 1680 denier fabric provides added strength and abrasion resistance. Ideal for protecting the knees when participating in framing, carpentry, automotive, general construction work, as well as flooring and carpeting.
The Stanley Tools FatMax® Lightweight Composite Hammer Tacker has a blended nylon composite housing that is both lightweight and durable, for long-lasting use. Fitted with an overmould grip for prolonged use and a drop in bottom loading for easy reloading. There is also a reversible belt clip and a fastener reload indicator for ease of use. Fires: Heavy-Duty Staples: 6-14mmLight-Duty Staples: 6-14mmNarrow Crown Staples: 10-14mm18G Brad Nails: 15mm
The Stanley Tools FatMax® EXO Change Folding Knife features an exposed, magnetic slider that provides fast manual blade change. It is quick and easy to remove debris from the slider. With integrated easy access blade storage for quicker changeover. The soft touch grip reduces slipping during use and the folding feature makes the knife easy to store. It also features stepped depth blade adjustment and the blade can be changed in seconds, no tools required.
The Stanley FatMax® Hardened and tempered blade for durability and long life. Moulded handle combining high impact plastic and soft touch inserts for improved comfort and control. Large smooth end pad to facilitate pushing and twisting blade through plasterboard. Sharp point for piercing board. Aggressive triple bevel teeth for a faster cleaner cut. Blade Length: 150mm (6in).Teeth 7 tpi.Supplied compete with scabbard.
The Stanley FatMax® Pro Pocket Tape has a Mylar® coated steel blade with large markings and BladeArmor® coating on the first 150mm for extended blade life. This coating makes it 10 times more impervious to damage from wear and tear than your average lacquer coated blade. The 32mm wide blade, offers a stand-out of 4m. The exceptionally tough bi-material case has incorporated cushion grip areas that provide sturdy, slip-resistant hold. Fitted with a 3-rivet, corrosion resistant, Tru-zero hook that is 150% larger than traditional end hooks. Its shape enables overhead, to the side, as well as the more regular type of measurements. Available with metric only or metric and imperial graduations.This Stanley FatMax® Pro Pocket Tape has metric and imperial graduations. Blade Length: 10m/33ftBlade Width: 32mmAccuracy: EC Class II
The Stanley FatMax® Pro Pocket Tape has a Mylar® coated steel blade with large markings and BladeArmor® coating on the first 150mm for extended blade life. This coating makes it 10 times more impervious to damage from wear and tear than your average lacquer coated blade. The 32mm wide blade, offers a stand-out of 4m. The exceptionally tough bi-material case has incorporated cushion grip areas that provide sturdy, slip-resistant hold. Fitted with a 3-rivet, corrosion resistant, Tru-zero hook that is 150% larger than traditional end hooks. Its shape enables overhead, to the side, as well as the more regular type of measurements. Available with metric only or metric and imperial graduations.This Stanley FatMax® Pro Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 32mmAccuracy: EC Class II
The Stanley 484488 FatMax® pliers set is ideal for any type of trade or just for around the home. This 3-piece set of Stanley pliers consists of a combination pliers, a long nosed pliers and diagonal side cutters and is suitable for a wide range of applications. Each of the pliers are made from hardened steel to provide the utmost strength and a longer operational life. Come with soft cushion grip handles which provide the user with a good positive grip and help to ease user fatigue in prolonged use. Set contains: 1 x Long Nose Pliers 155mm.1 x Diagonal Cutting Plier 165mm.1 x Combination Plier 165mm.
Designed to cut brickwork and concrete, this masons chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material hand guard for increased comfort and protection from over strike. Size: 215 x 45mm (8 1/2 x 1 3/4 in).
Used by carpenters, electricians and plumbers for lifting floorboards or channelling recesses in solid floors. The chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Hardened, quenched and tempered to precise specifications for added safety.Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 280 x 75mm (11 x 3 in).
Used by electricians for cutting out patrices, this chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 250 x 57mm (10 x 2 1/4 in).
The Stanley FatMax® Hardened and tempered blade for durability and long life. Moulded handle combining high impact plastic and soft touch inserts for improved comfort and control. Large smooth end pad to facilitate pushing and twisting blade through plasterboard. Sharp point for piercing board. Aggressive triple bevel teeth for a faster cleaner cut. Blade Length: 150mm (6in).Teeth 7 tpi.The Stanley STA220556 FatMax® Jabsaw compete with scabbard
The Stanley FatMax® PVC and Plastic Saw has a bi-material handle for improved grip and comfort. The handle is screwed and ultrasonically welded to the blade for security. The un-set teeth create less burrs when cutting and the induction hardened teeth allow for long lasting cutting life. It has a 30° / 90º marking feature at the end of the blade with the pull saw teeth making it easier to start off cuts and giving extra control. 1mm thick blade for increased accuracy of cut and 11 teeth per inch. Blade Length: 300mm (12in).
This Stanley FatMax® Professional Organiser is ideal for storing and organising small parts and accessories, such as fixings, nuts, bolts etc. It is supplied with 10 removable storage cups for easy access, allowing individual cups to be conveniently moved to where needed, without having to have the whole organiser near by - ideal for situations where space is limited. The transparent polycarbonate lid allows easy location of contents and locks components in position, to stop the cups sliding around. Side latches allow multiple organisers to be clipped together for easy transportation. It has plastic catches. Dimensions: Height: 7.4cm. Width: 35.7cm. Depth: 44.6cm.
The Stanley FatMax® Rolling Workshop is fitted with heavy-duty road tested wheels for durability and stability. An extendable handle offers the user easy manoeuvrability. Stanley have fitted metal latches to the mobile workshop which are designed to provide a long working life. This mobile tool chest has the additional feature of a top section toolbox with a plastic lift out tray for smaller tools. This fits neatly into the fold out lid. A good all-round storage system for home owners and tradesmen that will hold a comprehensive range of hand and power tools. Dimensions Dimensions: 750 x 550 x 110mm.Weight: 4kg.
The Stanley FatMax® Mobile Chest has a lock mechanism in the lid to hold a level and a saw. Tools can also be stored vertically within the chest. An all-round water seal keeps valuable contents safe. Heavy-duty wheels give mobility on rough surfaces. The portable tray is ideal for hand tools and small parts, and the lid has an integrated lock and keys to keep tools protected. It also has an integrated V-groove for any on-site sawing needs and the telescopic handle slides in for compactness when not in use. A back end handle enables convenient lifting into a vehicle for two people. Please Note - Tools NOT included Specification Dimensions: 910 x 516 x 431mm.
The FatMax® Tote is constructed from extra tough 600 x 600 denier fabric. It offers maximum tool protection thanks to its rigid and waterproof plastic bottom, reinforced stress points and industrial leather provides extra strength and carry comfort. A heavy-duty steel handle with rubber grip makes lifting more secure and comfortable. The open structure makes for quick and easy tool access as it keeps everything in place; with non-slip rubber straps for spirit level storage and a large side pocket for cable. Internal tool loops, covered compartments (including one with a drill bit holder inside), durable saw storage pocket and a steel holder for a measuring tape. Dimensions: 46 x 25 x 33cm.
The Stanley Tools FatMax® Rolling Duffle Bag fits a wide range of tools including 60cm levels, saws and tapes. An internal partition helps keep your tools organised. Large opening for easy access to content. Made from durable 600 denier fabric with a rivet construction and waterproof base for increased wear resistance. Fitted with an easy carry handle and shoulder strap as well as a telescopic handle and 2 wheels for easy transport of heavy loads. Specification: Load Capacity: 20kgSize: 70 x 30.5 x 31.8cm.
The Stanley Tools FatMax® Flip Bin Organiser has 12 removable, levered storage compartments, providing storage for small parts, components or accessories. Its lid is made from transparent polypropylene, making it virtually unbreakable whilst allowing a full view of the contents. A plastic handle with textured grip allows the organiser to be moved comfortably. For added versatility, multiple organisers can be clipped together using the side latches for easy transportation. Dimensions: 44.6 x 35.6 x 11.6cm
The Stanley FatMax® Quick Access Premium Tool Bag combines the advantages of both closed and open soft storage solutions into one. It has been constructed from durable materials for internal protection against tool damage. The high quality tarpaulin and 600 denier fabric provide added durability for increased wear resistance. 3 large tool compartments and multiple pockets provide a quick and convenient storage solution depending on your needs. The reinforced waterproof base protects against dirt and moisture. The ergonomic padded shoulder strap allows for easier carrying of heavier loads. FEATURES: - Open mouthed workstation with 3 internal compartments and 1 external pocket- Combines strong flexible high quality Tarpaulin with 600D- Large rigid open compartment for quick tool access - Two large separate zippered wide compartments- Padded shoulder straps for heavy load carriage- Rigid water-proof plastic bottom- Personal belongings compartment for wallet, keys, mobile phone- Multiple pockets and tool holders for a wide variety of tools
The STANLEY FATMAX® Quick Access Premium Tote Bag combines the advantages of both closed and open soft storage solutions into one. It has been constructed from durable materials for internal protection against tool damage. The high quality tarpaulin and 600 denier fabric provide added durability for increased wear resistance. 3 large tool compartments and multiple pockets provide a quick and convenient storage solution depending on your needs. The reinforced water proof base protects against dirt and moisture. The ergonomic steel bar handle and shoulder strap allow for easier carrying of heavier loads. FEATURES: - Steel bar handle and padded shoulder straps for heavy load carriage- Combines strong flexible high quality Tarpaulin with 600D- Large open tote design for quick and easy access to all tools simultaneously- Opens up as a workstation when working, tightly closed when travelling- 3 internal compartments and 1 external pocket- Rigid water-proof plastic bottom- Two separate zippered wide compartments- Personal belongings compartment for wallet, keys, mobile phone
The STANLEY FATMAX® Quick Access Premium Backpack combines the advantages of both closed and open soft storage solutions into one. It has been constructed from durable materials for internal protection against tool damage. The high quality tarpaulin and 600 denier fabric provide added durability for increased wear resistance. 3 large tool compartments and multiple pockets provide a quick and convenient storage solution depending on your needs. The reinforced water proof base protects against dirt and moisture. The ergonomic padded back and shoulder strap allows for easier carrying of heavier loads. There is also a separate internal compartment which is ideal for safely storing a laptop. FEATURES: - Tool backpack workstation with 3 internal compartments and 1 external pocket- Large open compartments for quick tool access- Combines strong flexible high quality Tarpaulin with 600D- Premium ergonomic padded back with air mesh- Padded shoulder straps for heavy load carriage- Secure padded laptop compartment- Multiple pockets and tool holders for a wide variety of tools- Rigid water-proof plastic bottom- Personal belongings compartment for wallet, keys, mobile phone
This Stanley FatMax® Plastic Fabric Open Tote has a strong injected polypropylene frame that gives the bag a strong and rigid structure. It is made from tough 600 Denier and ballistic nylon fabric and is hard-wearing, strong and durable. The tote has multiple internal and external pockets that provide maximum organisation and storage space for a variety of tools. The open design of the tote provides easy access to tools and power tools. Covered front pockets provide secure storage of small parts or personal items. This model is supplied with a cover. Dimensions: 490 x 280 x 310mm.
The Stanley Tools FatMax® Express Folding Workbench is ideal for professional tradesmen who require a robust, portable working surface with substantial material capacity. This versatile and ergonomically-engineered workbench has been designed with a spacious work platform (85 x 60cm) suitable for a host of pro applications, including hand and electric sawing, drilling, screwdriving, gluing, precision woodworking, spray painting, part cleaning, and all jobs that require materials to be fixed securely into place. Compatible with an extensive range of vertical and horizontal clamps, including the STANLEY FATMAX Trigger Clamp series, the Express Folding Workbench features a series of ‘dog bench’ holes and x-shaped grooves, allowing straightforward clamping of wood, metal or plastic items at any angle. Thanks to its quick collapsing, durable metal legs, the FATMAX Express Folding Workbench can be easily set up in seconds and is exceptionally solid and stable, supporting up to 455kg of material. Once each job is finished, the user can fold the workbench effortlessly into a compact unit for easy storage or transportation to the next working location. Two sturdy handles, one on the side and one at the end, add to its portable construction. Specification Capacity: 455kgSize Open (WxDxH): 101x60x78cmSize: Folded (WxDxH): 85x60x11cmWeight: 10.4kg
The Stanley FatMax® Multi Access Bag features dual side opening storage space, with two separate main wide opening compartments providing a large storage space for hand tools/power tools. It has a free-standing rigid structure with a reinforced plastic base to protect from water and dirt. There are multiple pockets for easy and convenient organisation of tools. Other features include a closed secure front pocket, padded shoulder strap and multiple internal and external pockets and loops.
The Stanley FatMax® Open Mouth Rigid Tool Bag provides easy access to tools, whilst the multiple internal and external pockets provide maximum organisation potential. The ergonomic design features a padded shoulder strap and a rubber grip handle for comfortable carrying. The injected polypropylene base protects the bag from moisture and dirt. The bag is made from 600 denier fabric that is hard-wearing, strong and durable, which resists cuts and scratches.
The Stanley FatMax® Double Sided Plumbers Bag conveniently opens up to a full workstation. Its double side opening enables separation of materials and tools. It offers ideal fit and protection for tools like pipe cutters, pipe benders, basin wrenches, making it perfect for plumbers. The bag features both external and internal pockets which enable maximum organisation, and its vertical storage pockets provide quick and easy access to all tools and small parts. The bag has a durable, anti-moisture material on its sides and an injected polypropylene bottom to protect against wet and damp surfaces.
Stanley 158501 FatMax® Interchangeable Nail Set with two nail set sizes (1/32in and 1/16in). Bi-material grip for comfort and reduced slipping. 1/4in locking system accepts standard screwdriver bits.
The Stanley FatMax® Hi Velocity Curve Claw Framing Hammer with innovative MIG Welding technology creating a lightweight and well balanced hammer with the strength of steel. Magnetic insert for starting nails.
The Stanley FatMax® I-Beam Magnetic Level range provides the ultimate in terms of overall strength and performance. They are fitted with solid block acrylic vials that have been machined to exacting tolerances to ensure that the movement of the bubble is smooth and comes to rest quickly. The Stanley FatMax I Beam Magnetic Level range have a small magnifying area in the centre which makes reading the position of the vial easier. It has rubber end caps which protect the level against damage if dropped and a curved body profile which allows the level to be used for gradients on drainage and pipe work. Accuracy: 1.0mm/m.The Stanley FatMax® I Beam Magnetic Level 1-43-558 is 2000mm (78in) in length.
Stanley FatMax® I-Beam Level has solid-block vials to provide an accuracy of 1.0mm/m in eight orientations. Plus every FatMax level comes with a lifetime accuracy warranty. It is 2 x stronger than other Stanley levels thanks to its unique reinforced box-beam construction. Lightweight body and rule scale for ease of marking out, also a handgrip make handling easy and the precision engineered, dual-machined levelling surfaces ensure maximum accuracy. The 3 vials are magnified for improved all round visibility with shock absorbing end caps protect the level even if it's dropped.Length 1800mm (72 in).
