The Stanley SY120 Safety Glasses are fitted with polycarbonate lenses. They have a lightweight design with rubber-tipped temples and a soft rubber nosepiece for a secure, comfortable fit. Conform to EN 166 standards.1 x Pair of Stanley SY120-1D Safety Glasses - Clear
Designed for Tradesmen, this bevel edged wood chisel has a ground finished, hardened and tempered alloy steel blade, with a one piece, solid impact resistant blue polypropylene plastic handle.The blade is lacquered for rust prevention. The 0-16-130 chisel set contains:4 x 5002 Wood chisels 6mm (1/4 in), 12mm (1/2 in), 18mm (3/4 in) and 25mm (1 in).1 x Carry Case.1 x Oil.1 x Sharpening stone.
This single pinion hand drill has an aluminium gear wheel.It has a 3-jaw self centring chuck 5/16in (8mm), a black japanned finish,and is fitted with comfortable plastic handles.
STANLEY Metal Adjustable Wrench with parallel jaws placed at a 15 degree angle to provide a firm grip and good reach. The jaws feature both metric and imperial scales. There is also a hanging hole that can be used for securing the tool to a lanyard, ideal when working at height.This STANLEY Metal Adjustable Wrench has the following specification: Length: 250mm (10in)Capacity: 33mm
The Stanley Intelli Tools Digital Infrared Thermometer is accurate to within 3° with a wavelength between 630-660nm and a temperature range of -38°C to +520°C. This large range allows users to effectively complete their desired tasks. With a high contrast, back lit display for visibility in all light conditions and an IP20 casing that provides protection against dust, increasing its working life. Features thermal leak detection, from a reference temperature (green screen). Scanning an area will show a red screen for high temperature and blue screen for low temperature. Its 8:1 spot ratio allows for users to measure a 32cm circle from 2.5m distance. Emissivity 0,95, covers all thermal radiation emission of most materials. Powered by 2 x AA batteries which are supplied.
The Stanley Cushion Grip screwdrivers come with a chrome plated bar which is corrosion resistant, and magnetic tips for easy pick up and screw locator. The soft grip handle provides excellent torque and comfort. It has a smooth domed end for fast spinning action, speed and comfort, and the large diameter handle offers greater torque which is needed for driving wood screws. Screw tip identification is shown on the handle. Contains: 4 x Slotted: 2.5 x 50mm, 3 x 100mm, 4 x 125mm, 6.5 x 150mm. 2 x Phillips: PH1 x 100mm, PH2 x 124mm. 2 x Pozi: PZ1 x 100m, PZ2 x 124mm.
The Stanley FatMax fine cut handsaws have a bi-material handle screwed and ultrasonically welded for comfort and security. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer. Fine cut blade 11 TPI.
The STANLEY Essentials Cantilever Toolbox features a 3 tier compartment system that unfolds as the box is opened, allowing for hassle-free access to contents. There are two organiser compartments built within the top of the lid that can be used to store small parts. Fitted with an ergonomic handle and secure metal front latches for easy opening and closing of the lid. A top padlock eye has been included to keep your items safe and secure. Designed for DIYers and anyone that would require customised storage around the home. Specification: Dimensions: 490 x 285 x 255mmMax. Load: 22kg
Twin Pack FatMax Tradelift™ + Free Bag.The STANLEY FatMax Tradelift™ with push down lever, allows the user to push down on the handle for easier lifting of heavy loads vs a trigger style mechanism. 8mm per stroke. There is also an incremental lowering tab lowering the lift plate 2.5mm per toggle for fine adjustments. Fitted with an overmould handle for improved comfort and grip. A recessed full release acts as a safety feature preventing accidental activation of full release.Its enclosed metal plate housing provides improved durability, this prevents dust and debris from entering the tool. The enlarged base plate is extended at the rear for added stability. An angled edge makes it easier to slide the base under objects. Anchor points with countersunk screw holes allow the user to fasten the lift down for added stability.Ideal for use in a wide variety of work environments and trades; such as kitchen fitters, door/window fitters, carpenters, joiners, drywallers, flooring installers and general construction. Examples of application; lifting and levelling kitchen units, nudging heavy objects in to place, lifting and holding doors in place, fitting windows, etc. Specifications:Lifting Force: 150kg.Lifting Capacity: 7-220mm.Lifting Action: Lever.Lift Stroke Capacity: 8mm.Incremental Lowering: 2.5mm.Base Dimensions: 6 x 170 x 125mm.
STANLEY 10 Piece Mixed Screwdriver Set in Wallet. Contains:3 x Slotted Screwdrivers: 3 x 100mm, 5.5 x 100mm, 6.5 x 38mm3 x Pozi Screwdrivers: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 100mm2 x Phillips Screwdrivers: PH1 x 100mm, PH2 x 100mm1 x VDE Slotted Screwdriver 4 x 100mm1 x VDE Pozi Screwdriver PZ2 x 100mm
The Stanley SXCMD15WE Wall Mounted Air Hose has a compact and sturdy design, plastic shrouds protect the internal mechanical parts. A built-in hose reel (9m) keeps your workspace neat and clean without the need to move the compressor in the work area. Utilises oilless technology, maintenance free and environmental friendly.Useable with a wide range of accessories and pneumatic tools.Specifications:Power: 1.5 HPAir Displacement: 160 l/min.RPM: 2,000Max. Operating Pressure : 8 barWeight: 8.5kg
The Stanley DN 200/8/6 Small Compressor is lightweight and extremely portable, ideal for domestic use or crafts. Its features an ON/OFF switch and control panel with easy-read gauge makes it simple to use. There is also a tool hook and power cord reel on the back.Accessories include: Blowing Nozzle and 5m Spiral Hose.Specifications:Power: 1.5 HPAir Displacement: 180 l/min.RPM: 3,400Max. Operating Pressure : 8 barTank: 6 litreWeight: 10kg
Stanley FMXCMS156HE FatMax SILTEK Compressor is ultra-silent, ideal for all applications requiring noiseless operation. Utilises oilless technology, no need in maintenance and respect the environment. Fully protected pumps thanks to sturdy casing. Easy to transport thanks to the distribution of components inside the structure. The controls have been grouped in control panel, making them easier to manage and use. Fitted with rubber feet for increased stability.Accessories include: 5m Rubber Hose.Specifications:Power: 1.5 HPAir Displacement: 160 l/min.RPM: 1,450Max. Operating Pressure : 8 barTank: 6 litreWeight: 20kg
The Stanley FMXCMS1524HE FatMax SILTEK Compressor is ultra-silent, ideal for all applications requiring noiseless operation. Utilises oilless technology, no need in maintenance and respect the environment. Easy to transport thanks to a comfortable handle and sturdy wheels. The controls have been grouped in control panel, making them easier to manage and use. Its large gauges are easier to read.Accessories include: 5m Rubber Hose.Specifications:Power: 1.5 HPAir Displacement: 160 l/min.RPM: 1,450Max. Operating Pressure : 8 barTank: 24 litreWeight: 24kg
The Stanley FMXCMD152WE FatMax Wall Mounted Air Hose has a compact and sturdy design, plastic shrouds protect the internal mechanical parts. A built-in hose reel (9m) keeps your workspace neat and clean without the need to move the compressor in the work area. Utilises oilless technology, maintenance free and environmental friendly.Useable with a wide range of accessories and pneumatic tools.Specifications:Power: 1.5 HPAir Displacement: 160 l/min.RPM: 2,000Max. Operating Pressure : 8 barTank: 2 litreWeight: 13kg
The Stanley Air Kit is perfect for small household chores. Extremely lightweight and compact (no tank). It also features a spacious storage compartment for accessories.Accessories include: Inflating Gun, 3-piece kit containing needles for inflating sports balls, bicycles and small mattresses, Blowing Nozzle, 3m Rubber Hose.Specifications:Power: 1.5 HPAir Displacement: 180 l/min.RPM: 3,400Max. Operating Pressure : 8 barWeight: 6.1kg
The Stanley Air Compressors Pneumatic Hammer Kit contains:1 x Pneumatic Hammer4 x Chisels1 x Pneumatic Hammer Retaining Spring1 x Mini Oiler2 x Quick Couplings 1/4in M1 x Oil BottleThe Hammer has the following Spec:Air Displacement: 170/6 l/minMax Working Pressure: 6/87 bar/PSIAir Connection: 1/4"Percussion/min: 4000 RPM
The Stanley Air Compressors Impact Wrench Kit contains:1 x 1/2in Impact Wrench10 x Sockets: 9, 10, 11, 13, 14, 17, 19, 22, 24, 27mm1 x Mini Oiler1 x Extension2 x Quick Couplings 1/4in M1 x Socket Head Key1 x Oil BottleThe Impact Wrench has the following Specification:Air Displacement: 200/7 l/min, / CFMMax Working Pressure: 6/87 bar/PSIAir Connection: 1/4Speed/min: 4,600 RPM
The Stanley Air Compressors Die Grinder Kit contains:1 x Die Grinder10 x Grinding Stones Ø 6/3 mm 2 x Keys1 x Chuck Ø 3mm1 x Chuck Ø 6mm2 x Quick Couplings 1/4in MThe DIe Grinder has the following Spec: Air Displacement : 170/6 l/min,/CFMMax Working Pressure: 6/87 bar/PSIAir Connection: 1/4"Speed/Min: 25.000 RPM
The STANLEY® Decorators Project Kit is perfect for both tradesfolk and DIY enthusiasts.Includes larger rollers for walls & ceilings, and a 4" roller for smaller decorating projects. Medium pile woven roller sleeves are designed for emulsion and water-based paints, suitable for smooth to semi-smooth interior or exterior walls and ceilings.
Strong, durable cage frame with soft grip handle for extra comfort.
5 wire cage with 8mm wire arm for greater strength.
Screw-fit extension pole connection for added reach.
No bristle loss, high performance with all paints and varnishes.
Easier to clean synthetic bristles for convenience.
The STANLEY Pro Knife features a linear design that maximises blade contact with the workpiece. Precision grip zones allow for accurate small cuts and longer, harder cuts. The rear handle flare reduces hand slippage during tough cuts. Tool-free blade change is incorporated into a slider for minimal downtime.Supplied with 10 blades.
The STANLEY FATMAX® XTREME™ Box Beam Level has been designed to provide durability and accuracy, providing you with the performance you need for every job. The patented continuous edge enables you with the ability to draw or scribe uninterrupted lines along the full length of the level. Whilst its fine milled primary edge provides 0.5mm/m accuracy, with a secondary edge accuracy of 0.8mm/m.Fully secured vial technology is designed to protect the vials against drop damage, while the 90% larger plumb vial provides an easier-to-see bubble for better visibility. The shock absorbing end caps are rubber moulded to protect the level from drop damage and feature raised anti-slip surface protectors to help protect against slipping and surface marking. Additionally, the end caps can be removed, making 90-degree markings and corner lines easier and more accurate. Strategically placed finger grab rails and wrap around handed grips are also incorporated for easier one handed use and better ergonomic design.This STANLEY® FATMAX® XTREME™ Box Beam Level Set contains:1 x FATMAX® XTREME™ Box Beam Level 60cm1 x FATMAX® XTREME™ Box Beam Level 120cm
The STANLEY® FatMax® 1/2in L PRO-STACK™ 26-Piece Socket Set is designed for both professionals and DIY enthusiasts. This set features Maxidrive Sockets with knurling for easy handling and a neck-down design for use in tight spaces.
Maxidrive Profile: Maximises contact between socket and nut for better grip.
Fully Connectable: Compatible with the STANLEY® FATMAX® PRO-STACK™ storage system.
Transparent Lid: Offers clarity of contents for easy identification.
Comprehensive Set: Includes 21 Maxidrive Sockets ranging from 8mm to 34mm.
Versatile Extensions: Comes with 76mm and 254mm extensions for added reach.
The STANLEY FATMAX® XTREME™ Box Beam Level has been designed to provide durability and accuracy, providing you with the performance you need for every job. The patented continuous edge enables the ability to draw or scribe uninterrupted lines along the full length of the level. Its fine milled primary edge provides 0.5mm/m accuracy, with a secondary edge accuracy of 0.8mm/m.Fully secured vial technology protects the vials against drop damage, while the 90% larger plumb vial provides an easier-to-see bubble for better visibility. The shock absorbing end caps are rubber moulded to protect the level from drop damage and feature raised anti-slip surface protectors to help protect against slipping and surface marking. Additionally, the end caps can be removed, making 90-degree markings and corner lines easier and more accurate. Strategically placed finger grab rails and wrap around handed grips are also incorporated for easier one handed use and better ergonomic design.The STANLEY® FATMAX® XTREME™ Box Beam Level Triple Pack contains:
1 x FATMAX® XTREME™ Box Beam Level 60cm
1 x FATMAX® XTREME™ Box Beam Level 120cm
1 x FATMAX® XTREME™ Box Beam Level 180cm
The STANLEY SXGB150E Bench Grinder is equipped with a grinding wheel and a steel polishing brush. This essential workshop machine has a powerful, silent induction motor and a range of safety features for maximum user protection.Fitted with transparent spark screens for increased safety. Each spark guard features an embedded magnifying glass. The solid base with anti-vibration supports prevents it from wobbling during operation. It also features tiltable, metal workpiece rests and a cooling tray (located on the base). Suitable for all finishing work: polishing, sanding and roughing.Supplied with one grinding wheel and one steel polishing brush.Specifications:Voltage: 240V.Input Power: 330W.No Load Speed: 2,980/min.Grinding Wheel Size: 150 x 20 x 12.7mm.Polishing Brush Size: 150 x 20 x 16mm.Weight: 10.0kg.
The Stanley SXDP13597E 13mm Drill Press is designed for precision drilling in both metal and wood. With variable speed settings ranging from 400 to 2700 m/min, you can easily select the optimal speed for your specific project. The 50mm spindle stroke allows for deeper drilling, ensuring accuracy and control.Equipped with a 13mm chuck and a transparent safety guard, this drill press accommodates drill bits from 1.5 to 13mm, making it versatile for various tasks. The ergonomic, non-slip handle enhances comfort and control, making it suitable for both hobbyists and professionals alike.
Variable Speed: 400-2700 m/min for versatile applications
50mm Chuck Stroke for deeper drilling precision
13mm Chuck Capacity for a wide range of drill bits
Ergonomic Handle for increased comfort and control
Ideal for both hobbyists and professionals
The STANLEY SXGBL150E Bench Grinder is equipped with a grinding wheel and a steel polishing brush. This essential workshop machine has a powerful, silent induction motor and a range of safety features for maximum user protection.Fitted with a transparent spark screen, on the disc side, for increased safety. The spark guard features an embedded magnifying glass. The solid base with anti-vibration supports prevents it from wobbling during operation. It also features tiltable, metal workpiece rests and a cooling tray (located on the base). Suitable for all finishing work: polishing, sanding and roughing.Supplied with one grinding wheel and one steel polishing brush.Specifications:Voltage: 240V.Input Power: 330W.No Load Speed: 2,980/min.Grinding Wheel Size: 150 x 20 x 12.7mm.Sanding Belt Size: 690 x 50mm.Weight: 10.0kg.
The STANLEY SXGB150E Bench Grinder is equipped with two grinding wheels (36 and 60 Grit). This essential workshop machine has a powerful, silent induction motor and a range of safety features for maximum user protection.
Transparent spark screens for increased safety.
Embedded magnifying glass in each spark guard.
Solid base with anti-vibration supports to prevent wobbling.
Tiltable metal workpiece rests for convenience.
Cooling tray located on the base for effective operation.
The Stanley SXDP16720E 16mm Drill Press is designed for precision drilling in both metal and wood. With a variable speed range of 420 to 2700 m/min, you can easily select the optimal speed for your specific project. The 60mm spindle stroke allows for deeper drilling, ensuring accuracy and efficiency.This drill press features a 16mm chuck with a transparent safety guard, accommodating drill bits from 3 to 16mm. Its ergonomic, non-slip handle provides comfort and control, making it suitable for both hobbyists and professionals. A must-have addition to any workshop.
Variable Speed: 420-2700 m/min for versatile applications
60mm Chuck Stroke for deeper drilling capabilities
16mm Chuck Capacity for various drill bit sizes
Ergonomic Handle for enhanced comfort and control
Ideal for both metal and wood drilling tasks
The STANLEY SXBW105E Portable Band Saw is ideal for cutting all metals, without lubrication in a safe and precise way. It features a solid cast iron frame, strong cast aluminum cutting arm, and an adjustable bar stop (500mm). The cutting angle can be adjusted between 0° and 45°.Fitted with an ergonomically designed handle for comfortable, safe handling. Light and portable, it weighs only 17kg, making it suitable for intensive use in workshops and on construction sites.Supplied with a bi-metal blade ideal for precise, burr-free cutting.
Voltage: 240V
Input Power: 750W
No Load Speed: 60/80m/min
Blade Dimensions: 1335 x 13 x 0.65mm
Weight: 17kg
The STANLEY SXBS914E Belt-Disc Sander features a powerful and silent asynchronous induction motor. Equipped with a 150mm sanding disc and a wide 100mm sanding belt, it allows for versatile sanding and polishing. The adjustable sanding belt can be set between 0 and 90 degrees, while the sanding disc area includes an adjustable work table with a protractor for precise angles.With a cast iron base for stability and a dust connection port for a cleaner workspace, this sander is ideal for finishing jagged edges and smoothing surfaces. Perfect for both DIY enthusiasts and professionals.
Powerful 370W induction motor for efficient sanding.
Adjustable sanding belt and disc for versatile applications.
150mm sanding disc and 100mm wide sanding belt included.
Dust connection port for cleaner operation.
Sturdy cast iron base ensures stability during use.
The STANLEY® Fibreglass Hi-Vis Claw Hammer not only reduces vibrations, but the forged high-carbon steel head improves durability and strength. The head and handle are also connected by 2-component epoxy adhesive, with both aspects balanced to help channel momentum and limit fatigue. The bi-material ergonomic grip features a ribbed surface and flared end to elevate comfort and grip, while the high-visibility green colouring makes this hammer much easier to find in a packed toolbox or work area.
STANLEY® VDE Screwdrivers have a chrome vanadium steel blade with a hardened tip for increased durability and reduced wear. The tapered, slim insulation allows access without modification and safe working to 1,000V. Fitted with a large diameter, bi-material handle for excellent torque transmission and control. Tested to 10,000V, rated to 1,000V AC.This 5 piece set contains:4 x Slotted Screwdrivers: 2.5 x 75mm, 3.5 x 75mm, 4 x 100mm and 5.5 x 125mm2 x Pozidriv Screwdrivers: PZ1 x 80mm and PZ2 x 100mm1 x Voltage Tester
The STANLEY® SXWT-PC531 Utility Flatform Dolly takes only seconds to open and close. All the major stress points are made of ultra-durable nylon; other plastic pieces are Polyproplene. Folds flat for easy storage.Specifications:Max. Load: 137kg.Base Plate: 60 x 45cm.Overall Size: Folded 600 x 450 x 77mm, Unfolded 600 x 450 x 167mm.Wheel Diameter: 75mm.Weight: 5kg.
