Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in square drive in AF imperial sizes are made from HPQ® high performance steel, and are chrome plated. HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor. The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads). MADE IN GERMANY.Size: 9/16 AF.Overall length: 24mm.
Stahlwille Internal to External adaptor made from HPQ® high performance tough steel alloys. Extremely high load capacity with exceptionally thin rings and walls. Free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners. Manufactured to DIN 3123/ISO 3316. MADE IN GERMANY.1 x Stahlwille Adaptor 3/4in Internal > 1in External
Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in square drives. They come in AF imperial sizes, and are made from HPQ® high performance steel, with chrome plating. The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial. The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm. MADE IN GERMANY.Stahlwille Extra Deep Bi-Hexagon Socket 1/4in Drive. Size: 9/32 AF.Overall length: 50mm.
Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in square drives. They come in AF imperial sizes, and are made from HPQ® high performance steel, with chrome plating. The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial. The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm. MADE IN GERMANY.Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive. Size: 7/16 AF.Overall length: 50mm.
Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in square drives. They come in AF imperial sizes, and are made from HPQ® high performance steel, with chrome plating. The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial. The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm. MADE IN GERMANY.Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive. Size: 1/4 AF.Overall length: 50mm.
Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in square drives. They come in AF imperial sizes, and are made from HPQ® high performance steel, with chrome plating. The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial. The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm. MADE IN GERMANY.Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive. Size: 3/8 AF.Overall length: 50mm.
Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in square drives. They come in AF imperial sizes, and are made from HPQ® high performance steel, with chrome plating. The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial. The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm. MADE IN GERMANY.Stahlwille Extra Deep Bi-Hexagon Socket Socket 1/4in Drive. Size: 1/2 AF.Overall length: 50mm.
Stahlwille Series 40D Bi-Hexagon sockets with 1/4in square drive in metric sizes are made from HPQ® high performance steel, and are chrome plated. HPQ® sockets are manufactured from selected tough steel alloys for an extremely high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor. The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1. MADE IN GERMANY.Stahlwille Bi-Hexagon Socket 1/4in Drive. Size: 9mm.Overall length: 23mm.
Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in square drive in AF imperial sizes are made from HPQ® high performance steel, and are chrome plated. HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor. The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads). MADE IN GERMANY.Stahlwille Bi-Hexagon Socket 1/4in Drive. Size: 7/16 AF.Overall length: 23mm.
Stahlwille Torque Wrenches have blank ends to accept interchangeable insert tools (sizes 9 x 12 or 14 x 18). The unique triggering cam mechanism means that the internal mechanism is only under load when force is applied to the wrench; there is no need to back the wrench off after use. The internal mechanism is extremely resistant to mechanical wear and is protected against dirt ingress. Suitable for use in the clockwise or anti-clockwise direction, simply by turning the wrench and insert tool over. The two-component handle is made of extremely tough, impact resistant plastic, which is resistant to oils, grease, fuels, brake fluids and Skydrol. The torque wrench has a clearly visible twin scale (Nm and ft.lb). It is quick and easy to set using the QuickSelect rapid setting. Max deviation of indication ± 3%. Supplied with factory calibration certificate, valid from day of first use. MADE IN GERMANY.Stahlwille 730N Torque Wrench. Overall length: 386mm.Capacity: 20 to 100Nm / 15 to 75 ft.lb.
Stahlwille Torque Wrenches have blank ends to accept interchangeable insert tools (sizes 9 x 12 or 14 x 18). The unique triggering cam mechanism means that the internal mechanism is only under load when force is applied to the wrench; there is no need to back the wrench off after use. The internal mechanism is extremely resistant to mechanical wear and is protected against dirt ingress. Suitable for use in the clockwise or anti-clockwise direction, simply by turning the wrench and insert tool over. The two-component handle is made of extremely tough, impact resistant plastic, which is resistant to oils, grease, fuels, brake fluids and Skydrol. The torque wrench has a clearly visible twin scale (Nm and ft.lb). It is quick and easy to set using the QuickSelect rapid setting. Max deviation of indication ± 3%. Supplied with factory calibration certificate, valid from day of first use. MADE IN GERMANY.Stahlwille 730N Torque Wrench. Overall length: 330 mm.Capacity: 10 to 50Nm / 7 to 37 ft.lb.
Stahlwille Reversible Ratchet with a 1/2in Drive and 36 teeth. It has an ergonomically designed, 2-component handle that is made of impact-resistant and skydrol-resistant plastic. Manufactured to DIN 3122/ISO 3315. MADE IN GERMANY.
This Stahlwille Bit Box contains the following: 1 x Magnetic bit holder4 x 25mm Phillips bits: PH1, PH2 (x2) and PH34 x 25mm Pozi bits: PZ1, PZ2 (x2) and PZ3.9 x 25mm Torx bits: T10, T15, T20 (x2), T25 (x2), T27, T30 and T403 x 25mm Hex bits: 4, 5 and 6mm. Supplied complete with a handy storage box.
Stahlwille Series 13A Combination Spanners. AF Imperial, with 15° offset ring end. Drop forged from high-grade chrome alloy steel and chrome plated. The spanners are optimally hardened in continuous furnaces with no scale build-up or skin decarburisation and gently quenched in oil. They are extremely strong yet lightweight due to Stahlwille's 'double-T profile'. Stahlwille's unique plating method prevents the problem of chrome flaking. The spanner's ring ends are equipped with an Anti-Slip Drive profile to permit high transmission of forces to the flats of the nuts and bolts without damaging them. MADE IN GERMANY.Size 1 1/8 AFLength 330mm
Stahlwille Long Series Combination Spanners. Metric, drop forged high-grade special steels and chrome plated. Manufactured to DIN 3113 form B/ISO 7738 form B. The spanners have been optimally hardened in continuous furnaces with no scale build-up or skin decarburisation and gently quenched in oil. They are extremely strong yet lightweight due to Stahlwille's 'double-T profile'. The unique plating method prevents the problem of chrome flaking. The ring end of the spanners are equipped with Anti-Slip Drive profile to permit high transmission of forces to the flats of the nuts and bolts without damaging them. MADE IN GERMANY.Stahlwille Combination Spanner. Size: 12mm.Length: 180mm.
Stahlwille Series 49 INHEX Sockets have 3/8in square drives and are suitable for socket head/hex head screws. Made from chrome alloy steel and chrome plated. Manufactured to DIN 7422 standards. Overall length: 52mm.Metric sizes. MADE IN GERMANY.Stahlwille In-Hex Socket 3/8in Drive. Size: 3mm.
The Stahlwille Series 44 INHEX sockets have 1/4in square drives for socket head/hex head screws. They are manufactured from chrome alloy steel and are chrome plated. Manufactured to DIN 3124/ISO 2725-1 standards. Overall length: 55mm. MADE IN GERMANY.Stahlwille In-Hex Socket 1/4in Drive. Size: 5/32 AF.
The Stahlwille Series 16 Combination Spanner. Metric, with a 15° offset ring end. Drop forged from high-grade special steels, with chrome plating, optimally hardened in continuous furnaces with no scale build-up or skin decarburisation and gentlly quenched in oil. It is extremely strong yet lightweight due to its 'double-T profile'. The unique plating method prevents the problem of chrome flaking. Manufactured to ISO 3318.MADE IN GERMANY.Stahlwille Combination Spanner. Size: 3.2mm.Length: 75mm.
Stahlwille Extension Bar with 3/4in square drive. Manufactured to DIN 3123/ ISO 3316. MADE IN GERMANY.Stahlwille Extension Bar 3/4 in Drive. Size: 400mm (16in).
The Stahlwille Series 16 Combination Spanner. Metric, with a 15° offset ring end. Drop forged from high-grade special steels, with chrome plating, optimally hardened in continuous furnaces with no scale build-up or skin decarburisation and gentlly quenched in oil. It is extremely strong yet lightweight due to its 'double-T profile'. The unique plating method prevents the problem of chrome flaking. Manufactured to ISO 3318.MADE IN GERMANY.Stahlwille Combination Spanner. Size: 5.0mm.Length: 95mm.
Stahlwille Series 40AD Bi-Hexagon sockets with 1/4in square drive in AF imperial sizes are made from HPQ® high performance steel, and are chrome plated. HPQ® sockets are manufactured from selected tough steel alloys for an extremeley high load capacity with exceptionally thin rings and walls. They are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor. The Sockets are equipped with AS drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads). MADE IN GERMANY.Size 1/2 AFOverall length 23mm
Stahlwille Series 17F Ratchet Combination Spanner with a 15 degree offset open-end and flat ring-end. Its ratchet mechanism features 72 teeth with a working angle of 5 degree. Change the ratchet direction by flipping the wrench over. Drop forged from high-grade chrome alloy steel and chrome plated for increased durability.1 x Stahlwille Series 17F Ratchet Combination Spanner 12mm.
Stahlwille 416QR Flexible Head 1/4in Drive Ratchet has an 80-tooth, reversible ratcheting mechanism, providing a working arc of 4.5 degree for fine adjustment. Fitted with a quick-release safety lock and an ergonomically designed 2-component handle. The handle may be raised or lowered by approximately 90 degree, lockable in the following positions: straight, 30 degree up, 60 degree up, 30 degree down. Release the lock by pressing the button in the handle. Manufactured to DIN 3122/ISO 3315. Made in Germany.
