The Faithfull Soft Grip Decorating Tool Kit features the 5 most popular selling painting and decorating tools from the Faithfull range. Each tool features a stainless steel blade for long-life and resistance to corrosion, and soft grip handles to provide greater comfort during long periods of use. Each knife has a fitted metal end cap that can be used to knock back protruding nails. Contains: 2 x Filling Knives 25mm and 75mm. Fitted with a flexible blade for inserting filler into cracks or holes. 1 x Stripping Knife 75mm. Fitted with a stiff blade for removing old paint and wallpaper. 1 x Putty Knife 38mm. With a 'clipt point' blade for applying putty and filler in cracks and corners. 1 x Combination Shavehook with a heart-shaped blade for removing paint from difficult corners or contoured surfaces.
Zinsser Wallpaper Cover-Up is an all-in-one, high hiding primer, sealer and stain-block that obliterates wallpaper print with a smooth off-white matt finish. It can be used under any coloured emulsion and prevents the wallpaper from blistering. Touch dry in 2 hours and recoat after 4 hours. Suitable for all types of wallpaper.
The Paper Tiger® Triple Head scoring tool has unique patented scoring wheels that perforate wallpaper allowing wallpaper stripper to penetrate. It is perfect for large wallpaper removal projects. The triple heads work rapidly to cut through several layers of wallpaper without damaging walls.Paper Tiger® Triple Head makes light work of wallpaper removal. Simply run it over the surface of the wallpaper to score it with ease. With the advantage of 3 cutting modules, allows you to score an entire room in a matter of minutes. Paper Tiger® Triple Head will not rust, corrode, or wear out. The hardened steel teeth remain sharp for many rooms of wallpaper removal.
Perma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces. Perma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film. Perma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information: Coverage: 10m² per Litre. Touch dry: 30 minutes. Hard dry: 7-10 days. Recoatable: 2 hours.Zinsser Perma-White® Interior Satin Paint is recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms. ZINPWIS25L comes in the following: Container type: Tin. Volume: 2.5 Litres.
Perma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces. Perma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film. Perma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information: Coverage: 10m² per Litre. Touch dry: 30 minutes. Hard dry: 7-10 days. Recoatable: 2 hours.Zinsser Perma-White® Interior Satin Paint is recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms. ZINPWIS1L comes in the following: Container type: Tin. Volume: 1 Litre.
Perma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces. Perma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film. Perma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information: Coverage: 10m² per Litre. Touch dry: 30 minutes. Hard dry: 7-10 days. Recoatable: 2 hours.Zinsser Perma-White® Interior Matt Paint is recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens. ZINPWES25L comes in the following: Container type: Tin. Volume: 2.5 Litres.
Perma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces. Perma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film. Perma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information: Coverage: 10m² per Litre. Touch dry: 30 minutes. Hard dry: 7-10 days. Recoatable: 2 hours.Zinsser Perma-White® Interior Matt Paint is recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens. ZINPWES1L comes in the following: Container type: Tin. Volume: 1 Litre.
Zinsser's Peel Stop® is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. Peel Stop® tightly bonds to old paint and problem areas forming a sound surface for new paint. It forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. Recommended uses:Peel Stop® prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters.Can be applied via airless sprayer, brush or roller. Application information: Coverage: 7.4 to 98m² per Litre.Touch dry: 1 hour. Hard dry: 7 - 10 days. Recoatable: 2 hours.
Zinsser Gardz® Sealer Primer is a clear, water-based, acrylic resin sealer that penetrates deeply into porous surfaces. It dries fast, and forms a hard, moisture-proof film that prevents drywall blistering and bubbling. It binds down chalky surfaces, strengthens soft texture finishes, and seals in residual wallpaper paste. Gardz® Sealer Primer can be applied to high-pH surfaces, and is easily cleaned up with soap and water. Recommended Uses: Damaged Drywall: prevents bubbles that form when damaged drywall is skim coated with spackling or joint compound. It penetrates and seals damaged facing paper, restoring it to a sound surface for repairs, suitable for painting or wallcovering. New Drywall / Joint Compound and Spackling: new gypsum drywall, joint compound and spackling are very porous and can make finish coatings appear splotchy and uneven. It penetrates and uniformly seals, creating a moisture resistant film that protects drywall from blistering, tearing and other damage when redecorating in the future. Plaster: freshly applied plaster is extremely porous but also extremely alkaline with a pH of 12.0 or more in many cases. Allow new plaster to cure at least 24 hours before applying. Before priming old, bare plaster, be sure to determine that the surface is clean, dry and in sound condition, taking care to repair any cracks or holes with spackling paste or joint compound before sealing the surface. Calcimine: is a very old form of plaster that is extremely chalky and water-sensitive. It penetrates calcimine more effectively than oil-base coatings and has a much lower odour. Because it resists moisture, it prevents water-based topcoat paint or texture finishes from softening up calcimine layers underneath. Wallpaper Adhesive Residue: water-based coatings or texture finishes will reactivate old wallpaper adhesive, resulting in cracking and peeling. Formulated to completely seal in residual adhesive and prevent it from ruining water-based topcoats and texture finishes. Texture and Popcorn Finishes: Can be used to seal textured walls and popcorn ceilings before applying water base primer or paint. It penetrates soft or crumbly texture material and hardens it, creating a durable, water resistant barrier that prevents primer or paint from softening texture material underneath. Old Wallpaper: most of the wallpaper installed before the 1960’s was true paper, with no vinyl coating. To determine if the wallcovering is a true paper wipe a wet sponge across the surface, if the water is readily absorbed it means there is no vinyl coating. This type of wallcovering can be effectively sealed. First, peel away any loose or frayed edges, or whatever remains should be firmly adhered to the wall. Apply as you would to any other wall surface. Pre-Wallcovering Primer: penetrates, seals, sizes and protects drywall facing paper and skim coat, providing a properly sealed surface for new wallcovering. At redecorating time, it protects the surface of the drywall when the old wallcovering is stripped off. Builder’s Flat Paint: penetrates chalky, builder’s flat paint and binds it to the wall, providing water-resistant protection from paint, wallcovering and texture finishes.Zinsser Gardz® Sealer Primer 1 Litre Colour: Clear.Size 500ml.
Zinsser Gardz® Sealer Primer is a clear, water-based, acrylic resin sealer that penetrates deeply into porous surfaces. It dries fast, and forms a hard, moisture-proof film that prevents drywall blistering and bubbling. It binds down chalky surfaces, strengthens soft texture finishes, and seals in residual wallpaper paste. Gardz® Sealer Primer can be applied to high-pH surfaces, and is easily cleaned up with soap and water. Recommended Uses: Damaged Drywall: prevents bubbles that form when damaged drywall is skim coated with spackling or joint compound. It penetrates and seals damaged facing paper, restoring it to a sound surface for repairs, suitable for painting or wallcovering. New Drywall / Joint Compound and Spackling: new gypsum drywall, joint compound and spackling are very porous and can make finish coatings appear splotchy and uneven. It penetrates and uniformly seals, creating a moisture resistant film that protects drywall from blistering, tearing and other damage when redecorating in the future. Plaster: freshly applied plaster is extremely porous but also extremely alkaline with a pH of 12.0 or more in many cases. Allow new plaster to cure at least 24 hours before applying. Before priming old, bare plaster, be sure to determine that the surface is clean, dry and in sound condition, taking care to repair any cracks or holes with spackling paste or joint compound before sealing the surface. Calcimine: is a very old form of plaster that is extremely chalky and water-sensitive. It penetrates calcimine more effectively than oil-base coatings and has a much lower odour. Because it resists moisture, it prevents water-based topcoat paint or texture finishes from softening up calcimine layers underneath. Wallpaper Adhesive Residue: water-based coatings or texture finishes will reactivate old wallpaper adhesive, resulting in cracking and peeling. Formulated to completely seal in residual adhesive and prevent it from ruining water-based topcoats and texture finishes. Texture and Popcorn Finishes: Can be used to seal textured walls and popcorn ceilings before applying water base primer or paint. It penetrates soft or crumbly texture material and hardens it, creating a durable, water resistant barrier that prevents primer or paint from softening texture material underneath. Old Wallpaper: most of the wallpaper installed before the 1960’s was true paper, with no vinyl coating. To determine if the wallcovering is a true paper wipe a wet sponge across the surface, if the water is readily absorbed it means there is no vinyl coating. This type of wallcovering can be effectively sealed. First, peel away any loose or frayed edges, or whatever remains should be firmly adhered to the wall. Apply as you would to any other wall surface. Pre-Wallcovering Primer: penetrates, seals, sizes and protects drywall facing paper and skim coat, providing a properly sealed surface for new wallcovering. At redecorating time, it protects the surface of the drywall when the old wallcovering is stripped off. Builder’s Flat Paint: penetrates chalky, builder’s flat paint and binds it to the wall, providing water-resistant protection from paint, wallcovering and texture finishes.Zinsser Gardz® Sealer Primer 1 Litre Colour: Clear.Size 1 Litre.
Zinsser DIF® Wallpaper Stripper is a patented wallpaper stripper based on enzyme action for fast and easy removal of wall coverings. With DIF®, wall coverings can be stripped quickly and reliably. It contains special enzymes - a unique, patented formulation with a superior more effective blend of wetting agents that speeds up penetration of the wallpaper and re-solubilisation of the paste. In contrast to DIF® Wallpaper Stripper, ordinary wallpaper remover solutions merely wet the paper and the paste, and therefore require a lot of scraping and do not work well except on loose sections. Softened paste tends to build up on the scraper blades, blunting them and leading to wall gouging. DIF® Wallpaper Stripper eliminates damage to walls caused by removal of uncoated, water-permeable wallpaper. Using DIF® Wallpaper Stripper is better than attempting to remove wallpaper with hot water, vinegar and water, or any other home brew solutions. Furthermore, it does not require the use of a steamer. Supplied as a powerful concentrate - just add water.Size: 2.5 Litre.
Zinsser DIF® Wallpaper Stripper is a patented wallpaper stripper based on enzyme action for fast and easy removal of wall coverings. With DIF®, wall coverings can be stripped quickly and reliably. It contains special enzymes - a unique, patented formulation with a superior more effective blend of wetting agents that speeds up penetration of the wallpaper and re-solubilisation of the paste. In contrast to DIF® Wallpaper Stripper, ordinary wallpaper remover solutions merely wet the paper and the paste, and therefore require a lot of scraping and do not work well except on loose sections. Softened paste tends to build up on the scraper blades, blunting them and leading to wall gouging. DIF® Wallpaper Stripper eliminates damage to walls caused by removal of uncoated, water-permeable wallpaper. Using DIF® Wallpaper Stripper is better than attempting to remove wallpaper with hot water, vinegar and water, or any other home brew solutions. Furthermore, it does not require the use of a steamer. Supplied as a powerful concentrate - just add water.Size: 1 Litre.
Zinsser CoversUp™ Aerosol is a low odour vertical aerosol that is a stain killer and ceiling touch-up paint in one. It seals water damaged ceilings and sprays vertically for ease of use. It’s perfect for touch up when you don’t want to repaint the entire ceiling due to spot damage. Zinsser’s stain blocking primer technology is incorporated into this new generation product that offers a flat white finish that matches most new acoustical ceiling tiles and white ceiling paints. CoversUp™ is an odourless solvent based formula with only a brief odour from propellants that diminishes quickly. Specification Size: 400ml.Colour: White.
Zinsser's Cover Stain® is an interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in only two hours.On interior surfaces, Cover Stain® dries quickly and has great hiding power, providing outstanding stain killing and enamel undercoating performance. Stains of all kinds are permanently sealed so topcoats are blemish free.Cover Stain® is especially effective on nicotine and water stains. New wood trim can be primed, sanded and top coated the same day, saving time and money. On exterior surfaces, Cover Stain® has a unique formulation that delivers full penetration and flexibility on all surfaces, especially dimensionally unstable wood panelling and trim, where few oil-based primers can succeed. It resists cracking and peeling and is compatible with all decorative top coats. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, pad or roller. Application information: Coverage: 9.8m² per Litre. Touch dry: 35 minutes. Hard dry: 4 - 7 days. Recoatable: 2 hours.Zinser CSP500 Cover Stain® is supplied in the following:Container type: Tin. Volume: 500ml.
Zinsser's Cover Stain® is an interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in only two hours.On interior surfaces, Cover Stain® dries quickly and has great hiding power, providing outstanding stain killing and enamel undercoating performance. Stains of all kinds are permanently sealed so topcoats are blemish free.Cover Stain® is especially effective on nicotine and water stains. New wood trim can be primed, sanded and top coated the same day, saving time and money. On exterior surfaces, Cover Stain® has a unique formulation that delivers full penetration and flexibility on all surfaces, especially dimensionally unstable wood panelling and trim, where few oil-based primers can succeed. It resists cracking and peeling and is compatible with all decorative top coats. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, pad or roller. Application information: Coverage: 9.8m² per Litre. Touch dry: 35 minutes. Hard dry: 4 - 7 days. Recoatable: 2 hours.Zinsser CSP400A Cover Stain® is supplied in the following:Container type: Aerosol. Volume: 400ml.
Zinsser's Cover Stain® is an interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in only two hours.On interior surfaces, Cover Stain® dries quickly and has great hiding power, providing outstanding stain killing and enamel undercoating performance. Stains of all kinds are permanently sealed so topcoats are blemish free.Cover Stain® is especially effective on nicotine and water stains. New wood trim can be primed, sanded and top coated the same day, saving time and money. On exterior surfaces, Cover Stain® has a unique formulation that delivers full penetration and flexibility on all surfaces, especially dimensionally unstable wood panelling and trim, where few oil-based primers can succeed. It resists cracking and peeling and is compatible with all decorative top coats. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, pad or roller. Application information: Coverage: 9.8m² per Litre. Touch dry: 35 minutes. Hard dry: 4 - 7 days. Recoatable: 2 hours.Zinser CSP25L Cover Stain® is supplied in the following:Container type: Tin. Volume: 2.5 Litres.
Zinsser's Cover Stain® is an interior / exterior primer, sealer, stain sealer and bond coat that dries for recoat in only two hours.On interior surfaces, Cover Stain® dries quickly and has great hiding power, providing outstanding stain killing and enamel undercoating performance. Stains of all kinds are permanently sealed so topcoats are blemish free.Cover Stain® is especially effective on nicotine and water stains. New wood trim can be primed, sanded and top coated the same day, saving time and money. On exterior surfaces, Cover Stain® has a unique formulation that delivers full penetration and flexibility on all surfaces, especially dimensionally unstable wood panelling and trim, where few oil-based primers can succeed. It resists cracking and peeling and is compatible with all decorative top coats. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, pad or roller. Application information: Coverage: 9.8m² per Litre. Touch dry: 35 minutes. Hard dry: 4 - 7 days. Recoatable: 2 hours.Zinser CSP1L Cover Stain® is supplied in the following:Container type: Tin. Volume: 1 litre.
Zinsser Ceiling Pro 5-in-1 is based on ground-breaking paint technology that effortlessly provides a perfectly finished ceiling every time. It adheres to any surface, seals stains (including water and smoke), primes and finishes whilst bridging hairline cracks. In addition Ceiling Pro 5-in-1 contains a biocide that protects the dried coating against fungal degradation, prolonging the life of the painted ceiling. These outstanding features combine with a 1 hour recoat time, low odour and ultra low VOC content. Suitable for both bare and previously painted ceilings.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN500 is supplied in the following:Container type: Tin.Volume: 500ml.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN400A is supplied in the following:Container type: Aerosol.Volume: 400ml.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN25L is supplied in the following:Container type: Tin.Volume: 2.5 litres.
Zinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects. Bulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains. Thanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, UPVC, wood, masonry and more. Bulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job. All of the above benefits combine with ultra low VOC content, a lightning quick drying time of just 30 minutes and a 1 hour recoat time. Bulls Eye® 1-2-3 Plus is white in colour and can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information:Coverage: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.Zinsser BE123P25L Bullseye 1-2-3 Plus is supplied in the following:Container type: Tin. Volume: 2.5 Litres.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN1L is supplied in the following:Container type: Tin.Volume: 1 litre.
Zinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects. Bulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains. Thanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, UPVC, wood, masonry and more. Bulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job. All of the above benefits combine with ultra low VOC content, a lightning quick drying time of just 30 minutes and a 1 hour recoat time. Bulls Eye® 1-2-3 Plus is white in colour and can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information:Coverage: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.Zinsser BE123P1L Bullseye 1-2-3 Plus is supplied in the following:Container type: Tin. Volume: 1 Litre.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE1231L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 1 Litre.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE12325L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 2.5 Litres.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 2.5 LitreColour: White Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 1 LitreColour: White Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 2.5 LitreColour: Black Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 1 LitreColour: Black Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
The Wagner SteamForce Pro Wallpaper Steamer is hard-wearing and durable. The powerful motor produces lots of steam, meaning it can penetrate through several layers of wallpaper at once. Suitable for removing all wallpaper types including multi-layered, painted and Artex™ using steam. The roll cage features a unique patented built-in step that provides a strong working platform. It has an extra large anodised water tank that can hold up to 7.5 litres of water, for up to 90 minutes steam time. It also includes a 5m long steam hose for a large working range. Ideal for professional users. Specification: Input Power: 2,750WTank: 7.5 litreMax. Running Time: 90 min.Heat Up Time: 18 min.Hose Length: 5mSteam Plate Size: 253 x 305mm & 140 x 70mmMains Cable: 5mWeight: 9.4kg
The Vitrex Power Max Tile Saw has a 560 Watt, high torque, direct drive motor which produces a constant cutting speed for ultra smooth cuts. It has adjustable, double extension arms to support larger format tiles and the cutting table tilts to allow mitre cuts. The tile saw has an integral ruler and adjustable rip guide for accurate, straight cuts. To prevent overheating, it has thermal overload protection, as well as a water cooling system with a large reservoir. Supplied with a 180mm x 16mm diamond blade with a continuous rim for extra clean cuts. Suitable for 16mm and 22mm bore blades. Specification Input Power: 560 Watt.No Load Speed: 3,000/min.Blade Size: 180mm.Cutting Depth: @90°: 30mm, @45°: 17mm.
