Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN400A is supplied in the following:Container type: Aerosol.Volume: 400ml.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN25L is supplied in the following:Container type: Tin.Volume: 2.5 litres.
Zinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects. Bulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains. Thanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, UPVC, wood, masonry and more. Bulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job. All of the above benefits combine with ultra low VOC content, a lightning quick drying time of just 30 minutes and a 1 hour recoat time. Bulls Eye® 1-2-3 Plus is white in colour and can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information:Coverage: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.Zinsser BE123P25L Bullseye 1-2-3 Plus is supplied in the following:Container type: Tin. Volume: 2.5 Litres.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN1L is supplied in the following:Container type: Tin.Volume: 1 litre.
Zinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects. Bulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains. Thanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, UPVC, wood, masonry and more. Bulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job. All of the above benefits combine with ultra low VOC content, a lightning quick drying time of just 30 minutes and a 1 hour recoat time. Bulls Eye® 1-2-3 Plus is white in colour and can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information:Coverage: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.Zinsser BE123P1L Bullseye 1-2-3 Plus is supplied in the following:Container type: Tin. Volume: 1 Litre.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE1231L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 1 Litre.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE12325L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 2.5 Litres.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 2.5 LitreColour: White Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 1 LitreColour: White Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 1 LitreColour: Black Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
The Vitrex Power Max Tile Saw has a 560 Watt, high torque, direct drive motor which produces a constant cutting speed for ultra smooth cuts. It has adjustable, double extension arms to support larger format tiles and the cutting table tilts to allow mitre cuts. The tile saw has an integral ruler and adjustable rip guide for accurate, straight cuts. To prevent overheating, it has thermal overload protection, as well as a water cooling system with a large reservoir. Supplied with a 180mm x 16mm diamond blade with a continuous rim for extra clean cuts. Suitable for 16mm and 22mm bore blades. Specification Input Power: 560 Watt.No Load Speed: 3,000/min.Blade Size: 180mm.Cutting Depth: @90°: 30mm, @45°: 17mm.
The Vitrex TL T001 Tile Lifter enables easy handling of non-porous tile, marble and glass during installation. Its vacuum lifts and holds up to 25kgs (55lbs), making it ideal for larger format tiles.
The Vitrex PT S001 Super Sponge is a professional heavy-duty extra large sponge suitable for big clean up jobs from tiling and grouting clean up to plastering and drywall wipe down. Unique hydrophilic design holds up to 4 times more liquid than standard sponges. The rounded edges minimise digging out or marring of grout.
These Vitrex Long Leg Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. They are easier to handle than standard tile spacers and allow for a 2mm grout line. Supplied in a resealable bag.Vitrex LLS5250 Long Leg Spacer Size: 5mm. Pack Size: 250.
These Vitrex Long Leg Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. They are easier to handle than standard tile spacers and allow for a 2mm grout line. Supplied in a resealable bag.Vitrex LLS4250 Long Leg Spacer Size: 4mm. Pack Size: 250.
These Vitrex Long Leg Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. They are easier to handle than standard tile spacers and allow for a 2mm grout line. Supplied in a resealable bag.Vitrex LLS3500 Long Leg Spacer Size: 3mm.Pack Size: 500.
These Vitrex Long Leg Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. They are easier to handle than standard tile spacers and allow for a 2mm grout line. Supplied in a resealable bag.Vitrex LLS3250 Long Leg Spacer Size: 3mm. Pack Size: 250.
These Vitrex Long Leg Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. They are easier to handle than standard tile spacers and allow for a 2mm grout line. Supplied in a resealable bag.Vitrex LLS31500 Long Leg Spacer Size: 3mm. Pack Size: 1500.
These Vitrex Long Leg Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. They are easier to handle than standard tile spacers and allow for a 2mm grout line. Supplied in a resealable bag.Vitrex LLS2500 Long Leg Spacer Size: 2mm. Pack Size: 500.
These Vitrex Long Leg Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. They are easier to handle than standard tile spacers and allow for a 2mm grout line. Supplied in a resealable bag.Vitrex LLS2250 Long Leg Spacer Size: 2mm.Pack Size: 250.
These Vitrex Long Leg Spacers provide an easy way to achieve a more professional tiling finish. They ensure a constant and even spacing of tiles, allowing for the specified size in grout line. The tiles spacers have easily breakable legs for T-shape spacers. They are easier to handle than standard tile spacers and allow for a 2mm grout line. Supplied in a resealable bag.Vitrex LLS22000 Long Leg Spacer Size: 2mm. Pack Size: 2000.
Vitrex Lash Clips & Wedges help prevent uneven tiles. Aligns tiles up to 12mm thick and ensures even grout lines. Easy-to-use, no tools needed.Handy packet with 30 clips and 30 reusable wedges.
Vitrex Lash Clips & Wedges help prevent uneven tiles. Aligns tiles up to 12mm thick and ensures even grout lines. Easy-to-use, no tools needed.Handy resealable tub with 150 clips and 150 reusable wedges.
The Vitrex GRS001 Grout Silicone Remover & Finisher is a complete kit for removing old sealant, grout and caulk. It also enables you to achieve a perfect finish when used with newly applied materials.
The Vitrex Grout Out Grout Removal Tool has variable speed for precision grout removing. It has a 3 speed pneumatic action which powers through old and discoloured grouts. It has interchangable grout removing tips and a 2.5m power cable allowing a greater working area. Specification Input Power: 13 watt. Max Stroke: 6,000 strokes per minute. Bit Diameter: 3.2mm. Replacement Tip Set Avaliable (VITGOT002).
The Vitrex Chisel Scraper is ideal for removing tiles and residue from most surfaces. It is fitted with a hammer end for quick strike use on stubborn materials.
The Vitrex 10 3420 Versatile Power Pro 750 Wet Saw is a mains powered wet tile saw that has a direct drive system with a quiet induction motor which produces a constant cutting speed for ultra smooth cuts, water cooling system with large reservoirs, and is fitted with a diamond blade with continuous rim for extra clean cuts. The extra large cast aluminium cutting table is ideal for supporting oversize tiles. It has an integral ruler and quick lock aluminium rip guide for perfect straight cuts, fully adjustable mitre guide with unique ratchet mechanism and the tables tilt for 15° , 30° and 45° mitres. Suitable for porcelain, ceramic, granite, natural stone and marble tiles. Specification Input Power: 750 Watt.No Load Speed: 2800/min.Blade Size: 180mm.Max Cutting Depth:@90°: 25mm, @45°: 17mm.Weight: 15kg.The Vitrex 10 3420 Versatile Power Pro 750 Wet Saw 110 Volt Version
The Vitrex 10 3420 Versatile Power Pro 750 Wet Saw is a mains powered wet tile saw that has a direct drive system with a quiet induction motor which produces a constant cutting speed for ultra smooth cuts, water cooling system with large reservoirs, and is fitted with a diamond blade with continuous rim for extra clean cuts. The extra large cast aluminium cutting table is ideal for supporting oversize tiles. It has an integral ruler and quick lock aluminium rip guide for perfect straight cuts, fully adjustable mitre guide with unique ratchet mechanism and the tables tilt for 15° , 30° and 45° mitres. Suitable for porcelain, ceramic, granite, natural stone and marble tiles. Specification Input Power: 750 Watt.No Load Speed: 2800/min.Blade Size: 180mm.Max Cutting Depth:@90°: 25mm, @45°: 17mm.Weight: 15kg.The Vitrex 10 3420 Versatile Power Pro 750 Wet Saw 240 Volt Version
The Vitrex 10 3412 Ultimate Diamond Blade is suitable for use in a tile cutter and has both high strength and durability. It has a continuous rim which produces extra clean cuts on ceramic, porcelain, granite, marble and natural stone. In addition, it helps to prevent chipping and cracking of tiles, which can be a common problem. For use with Vitrex Electric Cutters WS560180, 103420, 103421 and 103430. Diameter: 200mm.
Vitrex10 3407 Diamond Blade suitable for cutting ceramic, terracotta and quarry tiles, slate, marble, masonry, concrete and stone. It has a 16mm diameter bore and a continuous rim for a cleaner cut. For use with Vitrex Electric Cutters WS560180, 103420, 103421 and 103430. Diameter: 180mm.
The Vitrex 10 3402 NDE Torque Master Power Tile Cutter with a diamond cutting blade has a Hi-Torque gear for maximum cutting performance, and a splash guard with a variable height adjustment. Uses a 110 x 22mm diamond blade with continuous rim for extra clean cut, and has a fully adjustable mitre guide with unique ratchet mechanism. Has a double extension built-in for larger tiles, giving the machine greater versatility. The integral measuring guide and quick release rip guide allows for perfect straight cuts. The flip-up table allows for 22.5° and 45° mitres. Has a no mess water re-circulation system that keeps the work area clean and tidy, and the quick release splash guard allows for plunge cuts. Specification Input Power: 450 Watt.No Load Speed: 4,600/min.Blade Size: 110mm.Cutting Depth: @90°: 25mm, @45°: 17mm.Weight: 6kg.
The Vitrex 10 3175 Tile Scorer with a tungsten carbide tip. Durable nylon handle with thumb recess for extra grip. Suitable for scoring wall and floor tiles.
The Grout Squeegee and Spreader Set is a pack of essential tools for tile adhesive and grout application, consisting of a large squeegee, a 6mm square notch tile adhesive spreader and a 4mm V notch spreader. The Large squeegee has a strong flexible plastic blade with squeegee edge for rapid grout application and a contoured handle for extra comfort. The Tile Adhesive spreaders allow for fast adhesive application:6mm Square Notch - for installing tiles on walls4mm V Notch – for installing smaller tiles and mosaics on walls
The Vitrex 10 2961 Large Spreader is a strong flexible plastic spreader with notched edge for fast adhesive application. It has a contoured handle for extra comfort.
The Vitrex 102925 Professional Tile Wash Kit comes with an extra-large 22L container on wheels for easy manoeuvring and easy positioning. The container has 3 integral rollers that are used to wring out the sponge, and a fitted plastic lid. Supplied with a heavy-duty segmented foam sponge for quick cleaning of large, freshly grouted areas.
