The DEWALT DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. Fitted with a high power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design that is very comfortable to use and fits in small spaces. The 3 LED, Halo light ring offers excellent work piece lighting. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/Min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max Torque: 26/80/205Nm.The DEWALT DCF887N Brushless G2 3SP Impact Driver 18 Volt is supplied as a Bare Unit NO battery or charger supplied.
The HiKOKI WR36DB Brushless Impact Wrench has a high overload capacity with a 4-mode power selection. The forward/reverse switch provides increased control, making it easy to switch between modes. The compact design is IP56 rated against dust and water ingress, making it ideal for site use. The body features a soft grip handle for increased comfort and reduced user fatigue. There is also a rubber nose protector. For added safety there is an electric brake. Other features include: a 3-mode LED work light (always on, automatic and always off), and a large side hook that can be fitted on the left or right hand side. WR36DB/JRZ: 2 x 18/36V 5.0/2.5Ah Li-ion BatteriesWR36DB/J4Z: Bare Unit, No Battery or Charger Specification: Bit Holder: 12.7mm (1/2in) Square Friction RingNo Load Speed: 0-1,500/min.Impact Rate: 0-2,800/bpmMax. Torque: 1050NmBolt Capacity: Ordinary: M12-30, HT: M10-24Overall Length: 221mmWeight: 3.0kgThe HiKOKI WR36DB/J4Z Brushless Impact Wrench is supplied as a bare unit. Batteries are NOT included.
The Makita DTD155 LXT Impact Driver has a powerful brushless motor, electronically controlled to optimize battery energy use for up to 50% longer run time per charge. It offers 3 modes of operation: A-mode / hard mode / soft mode. A-mode feature helps eliminate 'screw cam-out' and 'cross threading' by driving at low speed until tightening begins. Fitted with an ergonomically designed handle and LED job light with pre-glow and afterglow functions.Comes as a bare unit, no battery or charger supplied.Specifications:Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,300/0-3,000/min.Impact Rate: 0-1,600/0-3,900/bpmMax. Torque: 140NmStandard Bolt: M5-M14, High Tensile Bolt: M5-M12Weight: 1.2kg
The Makita DTD173 LXT Impact Driver has a powerful brushless motor, delivers longer runtimes, less maintenance and better power control. Its 4 stage impact selection covers a wide selection of jobs. Fitted with an ergonomically designed handle and LED job light with three brightness settings for improved visibility.Comes as a bare unit, no battery or charger supplied.Specifications:Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,100/2,100/3,200/3,600/min.Impact Rate: 0-1,100/2,600/3,600/3,800/bpmMax. Torque: 20/50/170/180NmStandard Bolt: M5-M16, High Tensile Bolt: M5-M14Weight: 0.85kg (without battery)
The DEWALT DCF620D2K Brushless Collated Drywall Screwdriver is ideal for efficient fitting of drywall. It has a powerful BRUSHLESS motor that drives screws efficiently and effectively and which offers maximum runtime. This drywall screwdriver is one of the lightest and most compact tools on the market making it ideal for use in tight spaces. Its quick release collated screw magazine accepts most collated screws to allow the user to fit boards more quickly. The magazine rotates on the tool without removal to allow use in corners with minimum fuss. The DCF620D2K features tool free depth control and fine depth control for simple but effective setting. Its LED worklight offers valuable light when working in small spaces or areas with limited light. A trigger lock allows comfortable, prolonged work. The DCF620D2K has an ergonomically designed rubber grip for excellent user comfort whilst using the tool in either the 'in-line' or 'pistol-grip' hand position. It is also supplied with locking nose cone, allowing work with the same tool on sites where collated drywall screws are not supplied. The 'Set and forget' feature remembers your fine depth adjustment setting when removing and replacing the nose cone. Supplied with: 2 x 18 Volt 2.0Ah XR Li-Ion Batteries, 1 x Multi-Voltage XR Charger, 1 x DCF6201 Collated Screw Magazine, 1 x DT7205-QZ PR2 Collated Screw Bit, 1 x Single Screw Nose Cone, 1 x DT7520-QZ Magnetic Bit Extender with 25mm PR2 Screw Bit and 1 x TSTAK 2 Kitbox. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-4,400/min.Torque: 5-30Nm.Collated Head Capacity: 55mm.Weight: 1.88kg.
PRE-ORDER ONLY! NO STOCK UNTIL MARCH 2025!The DEWALT DCF85MP2T McLaren F1 XR Brushless 1/4in Impact Driver with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. The variable speed trigger provides increase speed control for a lower risk of over tightening.Its compact design makes it ideal for a wide range of applications in construction, industrial and automotive environments. Fitted with an ergonomic grip that allows for longer duration of use and maximises user comfort. The 3 x LED 'Halo' light ring offers excellent workpiece lighting.Supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x DCB1104 4amp Charger and 1 x DEWALT McLaren Carry Case.Specifications:Bit Holder: 6.35mm (1/4in).No Load Speed: 3,250/min.Max. Torque: 205Nm.
The Einhell TC-SD3.6LI Screwdriver has right / left turn, 3 step LED battery capacity indicator, bright LED light for poorly lit areas and a locking sleeve. There is a locking button for the turnable handle to lock securely in the desired position when in use. Complete with a soft-grip handle for added grip and control. Comes with: 4 x Screwdriver Bits, 1 x Holster and 1 x Charger. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 200/Min.Charging Time: 3-5 Hours.Weight: 0.4kg.
The DEWALT DCF897 XR Impact Wrench with a 3/4in cold forged anvil with hog ring retention pin for durability and allows fast and frequent change of sockets without aligning any pins. Its brushless motor provides durable power and excellent runtime. Features variable speed, 3 speed select control or application specific torque and drive control. It produces a high torque of 950Nm, Break Away at 1,627Nm, delivering excellent performance for various applications. The wrench has an ergonomic grip for comfortable use and has been drop tested for enhanced durability. There is also a super-bright LED on the foot to avoid shadow and casts light at the point of application. Bare Unit, No Battery or Charger Supplied. Specification: Bit Holder: 3/4in Hog RingNo Load Speed: 0-400/1,200/1,900/min.Impact Rate: 0-2,400/bpmMax. Torque: 950Nm, Breakaway Torque: 1,627NmWeight: 2.6kg
The DEWALT DCF801 XR Sub-Compact Impact Driver is 33mm shorter than the previous generation, allowing access into small spaces. It has an efficient brushless motor with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg
The DEWALT DCF622 XR Brushless Self Drilling Screwdriver is ideal for the quick fitting of metal roofing and other sheet metal applications. It's versa-clutch delivers a repeatable screw setting with minimum fuss. Fitted with a high torque brushless motor that drives screws up to 6.15mm diameter efficiently and effectively offering maximum run time and a compact tool. Durable, ergonomic design and rubber grip for improved user comfort. DCF622P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCF622N: Bare Unit, No Battery or Charger Supplied. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,000/min.Max Torque: 11/34Nm. Max Screw Diameter: 6.15mm.Length: 255mm. Height: 265mm.Weight: 1.97kg.The DEWALT DCF622N XR Brushless Self Drilling Screwdriver is supplied as a Bare Unit
The Bosch GDX 18V-200 Professional Impact Driver/Wrench combines brushless power, a compact design and a 2-in-1 tool holder for highest flexibility. Its unique 2-in-1 tool holder with 1/4in internal hex and 1/2in square drive makes it versatile and ideal for the widest range of applications. A variable speed trigger provides better control over speed and torque.Electronic Motor Protection (EMP) protects the motor against overload and ensures a long life. The ideal choice for tightening and removing screws, when working in metal sheet, metal or wood. It also features a handy LED work light, ideal when working in confined spaces and a belt clip.Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance.Specifications:Tool Holder: 1/4in Hex Uni, 1/2in Square.No Load Speed: 0-3,400/min.Impact Rate: 0-4,000/bpm.Max. Torque: 200Nm.Max. Breakaway Torque: 350Nm.Max. Screw Diameter: M6 – M16.Weight: 1.2kg excl. battery.
This Bosch GDX 18V-200 Professional Impact Driver/Wrench is supplied with:2 x 18V 5.0Ah Li-ion Batteries.1 x GAL 18V-40 Charger.1 x L-Case Carry Case.
The DEWALT DCF887M1 XR Impact Driver is equipped with application control, 3 motor speeds and torque settings. Precision drive mode offers additional control in screwdriving applications to avoid material and fastener damage. Fitted with a high-power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design and a 3 LED, halo light ring. Supplied with: 1 x 18V 4.0Ah Li-ion Battery, 1 x Belt Hook, 1 x Magnetic Bit Holder, 1 x Multi-Voltage XR Charger and 1 x Toolbox. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-3,800/bpmMax. Torque: 205NmCapacity: Bolt M12Weight: 1.34kg
The Einhell TE-SD 3.6/1 Li Cordless Screwdriver has robust metal gearing for maximum durability. Bits can be changed quickly thanks to the 6.35mm (1/4in) magnetic bit holder. With an ergonomic design and soft grip handle for easy handling and working without tiring, even in prolonged use. For optimum operation in dark areas there is integrated LED lighting. The cordless screwdriver is always ready-for-use thanks to the lithium-ion technology without self-discharge. Supplied with: 1 x Set of 10 Bits, 1 x 3.6V 1500mAh Rechargeable Battery, 1 x Micro USB Charger and 1 x High-Quality Metal Storage Box. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 180/min.Max. Torque: 4.5NmCharge Time: 3-5 hoursLength: 185mmWeight: 358g
Senco screwdriver bits to suit DS300. All bits are tapered and hardened to ensure smooth and long-lasting drive capability. Suitable for both cordless and mains operated machines.Senco DS300 Screwdriver Bit SQ2- Pack of 2. Overall Length: 227.7mm
Senco screwdriver bits to suit DS300. All bits are tapered and hardened to ensure smooth and long-lasting drive capability. Suitable for both cordless and mains operated machines.Senco DS300 Screwdriver Bit PH2- Pack of 2. Overall Length: 227.7mm
The Senco DS5550 DuraSpin Screwdriver is a compact, well balanced machine thanks to its 5,000rpm high speed motor. It offers outstanding performance for the most demanding professional drywall installer. With a smooth drive operation and a variable speed trigger that allows you to control the rpm of the tool. Includes Senco's patent pending corner-fit indexing technology that allows placement of screws into tight places that are unreachable by any other auto-feed screw guns. Drives screws from 25-55mm in length. Quick slide button bit change and tool-free screw length adjustment, for ease when changing size, or application. Achieve a precise depth-of-drive adjustment with a depth lock. With reduced force required to drive, you can work all day with less fatigue. Ideal for applications including Drywall (wood or steel studs), Underlayment, Cement Board. Supplied with: 2 x Drive Bits, 1 x Drywall & Wood Nose Piece, 1 x Belt Hook (right or left handed adjustable) and 1 x Robust Carry Case. Comes with a 1 Year Limited Warranty. Specification No Load Speed: 0-5,000/min.Torque: 6.78Nm.Screw: Diameters: 3.5-4.2mm, Lengths: 25-55mm.Dimensions (LxWxH): 381 x 86 x 260mm.Weight: 2.13kg.Senco DS5550 DuraSpin® Screwdriver 25-55mm 110 Volt Version
The Senco DS722-18V DuraSpin® Auto-Feed Screwdriver is powered by an efficient, variable speed, brushless motor. It has a variable speed selector for heavy steel and a quick-release feed system with our patented corner fit technology. The DS722-18V also features feed on return, so the next screw is aligned with the bit for better line of sight and easier, more accurate screw placement. Comes with a 5-Year Warranty. Supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x Li-ion Charger and 2 x 200mm Screwdriver Bits. Specification: Fastener Type: Collated ScrewsFastener Length: 25-75mmScrew Diameter: 3.5-5.5mmRotations per minute: 2,500 rpmTorque: 8.00NmTool Dimensions (LxWxH): 419.5 x 86 x 241mmRecharge Time: 100% 45 minutes, 80% 15 minutesWeight: 2.70kg
The DEWALT DCF620N Drywall Screwdriver has a powerful brushless motor that drives screws efficiently and effectively, offering maximum run time and a compact tool. It has a lightweight compact design that allows you to work comfortably in small spaces. The Set and Forget feature remembers your fine depth adjustment setting when removing and replacing the nose cone and there is a trigger lock that lets you work without having to pull the trigger. It is fitted with an ergonomically designed rubber grip that gives excellent user comfort whilst using the tool in either the in-line or pistol-grip hand position. Other features include an LED work light and an angled belt hook which can be positioned for left or right handed users that fixes the tool strongly onto your tool belt/pouch. DCF620P2K: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCF620N: Bare Unit, No Battery Or Charger Supplied. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-4,400/min.Max Torque: 5-30Nm. Head Length: 220mm.Length: 262mm. Height: 203mm.Weight: 1.08kg.The DEWALT DCF620N Brushless Drywall Screwdriver is supplied as a Bare Unit, No Battery Or Charger Supplied.
The DEWALT DCF6202 Collated Drywall Screw Gun Attachment connects to the DCF620 Brushless Drywall Screwdriver to enable tool usage with flexible-strip collated drywall screws. It offers tool-free screw length adjustment with detent marks that allow for easy and clear setup for varying screw lengths. The 360° rotation capability and slim nose with removable shoe allows easy access into tight corners. Tool-free spring removal allows for easy cleaning of attachment.
Olympia Tools® Cordless Screwdriver with an easy-to-use pivot handle that changes from a traditional pistol grip handle to a straight handle for use in confined spaces. An automatic spindle lock makes it easy to switch between bits. Fitted with a comfortable soft grip handle and an LED job light. There is also a handy charge level indicator for easier work management. Supplied with: 1 x 3.6V 1.3Ah Li-ion Battery, 1 x Charger and 4 x Screwdriver Bits. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 230/min.Max. Torque: 3NmCharging Time: 3-5 hoursWeight: 0.35kg
The Einhell TE-CI 18 Li Power X-Change Cordless Impact Driver is fitted with a unique triathlon motor that is powerful and efficient for the highest demands in power-sapping screwdriving jobs. It has a special impact mechanism to eliminate any torsion forces on the user’s wrist, users can therefore effortlessly tighten large and long screws. The short, lightweight design has ergonomic soft grip surfaces and a rugged aluminium housing that has additional rubber supports for increased protection. The driver has precision speed control for fine adjustment on delicate jobs. Other features include: a standard Allen screw mount (it is recommended that you use impact resistant bits), practical belt clip and 3 power LEDs included for good all-round illumination. EINTECI181LI: 1 x 18V 2.0Ah Li-ion BatteryEINTECI18LI: 1 x 18V 1.5Ah Li-ion BatteryEINTECI18LIN: Bare Unit, No Battery or Charger Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,300/min.Impact Rate: 0-3,200/bpmMax. Torque: 140NmWeight: 1.45kgThe Einhell TE-CI 18 LIN Power X Change Impact Driver is a Bare Unit, NO battery or charger supplied.
The DEWALT DCF860 E2T XR Impact Driver has a brushless motor which delivers high performance, extends tool life and allows for a much shorter design. Fitted with a Drop and Load bit holder for easy, one-handed operation. Its compact design makes it ideal for a wide range of applications in construction, industrial and automotive environments. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode. Supplied with: 2 x 18V 1.7Ah POWERSTACK Li-ion Batteries, 1 x Charger and 1 x TSTAK Kitbox. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all of the 18V XR tools you already have. Specifications: Bit Holder: 6.35mm (1/4in). No Load Speed: 0-1,800/0-2,800/0-3,800/min. Impact Rate: 0-4,400/bpm. Max. Torque: 282Nm. Weight: 1.09kg (without battery). * Regarding 50% more power: vs DCB183 battery, not in application. ** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery.
The HiKOKI W8VB2 TEKS® Screwdriver features an adjustable depth setting, ideal for TEKS® self-drilling screws and drywall screws. With a forward/reverse selection and a lock-on button for reduced fatigue during long periods of use. The ergonomic body design features a soft grip handle, with improved handle geometry for greater operator comfort. Aluminium gear casing for extended product durability. The soft urethane cover on gear housing prevents damage to the work surface. Detachable nose cone for easy bit replacement, and an extra long 7.5m power cord. Supplied with: 1 x Magnetic Hex Socket, 1 x Nose Cone. Specification: Bit Holder: 6.35mm (1/4in)Input Power: 620WNo Load Speed: 0-1,700/min.Capacity: TEKS: 8mm, Wood: 6.2mm, Drywall: 6mmWeight: 1.5kg
Senco Screwdriver bits to suit DS5550 / DS5525. All bits are tapered and hardened to ensure smooth and long-lasting drive capability. Suitable for both cordless and mains operated machines.Senco DS5550 / DS5525 Screwdriver Bit SQ2 2 pack. Overall Length: 175mm
The Einhell TE-CI 18 LI BL Power X-Change Impact Driver has a brushless motor for increased performance and longer operating times than a conventional carbon brush motor. The finely adjustable electronic speed control can be precisely adjusted to your requirements for the material you wish to work on, so that neither the material nor the impact driver are over strained. For soft and delicate materials in particular, it allows work to be carried out with sensitive operation. It has a short, light-weight design that reduces body stress and fatigue, and the ergonomic soft grip surfaces provide a comfortable and firm hold. For improved vision where visibility is poor there is an LED light. A direction indicator and battery capacity indicator on the machine keep you informed about its current status at all times. The Power X-Change high-speed charger takes 30 minutes to charge the battery. In addition, the battery packs can be used for all products from the Power X-Change family. 4510035: 1 x 18 Volt 4.0Ah Li-Ion Battery.4510030: Bare Unit, No Battery or Charger. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,900/Min.Max Torque: 180Nm.Charging Time: 80 Minutes.Weight: 2.95kg.The Einhell TE-CI 18 LI BL Power X-Change Brushless Impact Driver is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCF620N Drywall Screwdriver has a powerful brushless motor that drives screws efficiently and effectively, offering maximum run time and a compact tool. It has a lightweight compact design that allows you to work comfortably in small spaces. The Set and Forget feature remembers your fine depth adjustment setting when removing and replacing the nose cone and there is a trigger lock that lets you work without having to pull the trigger. It is fitted with an ergonomically designed rubber grip that gives excellent user comfort whilst using the tool in either the in-line or pistol-grip hand position. Other features include an LED work light and an angled belt hook which can be positioned for left or right handed users that fixes the tool strongly onto your tool belt/pouch. DCF620P2K: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCF620N: Bare Unit, No Battery Or Charger Supplied. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-4,400/min.Max Torque: 5-30Nm. Head Length: 220mm.Length: 262mm. Height: 203mm.Weight: 1.08kg.The DEWALT DCF620P2K Brushless Collated Drywall Screwdriver is supplied with: 2 x 18 Volt 5.0Ah Li-Ion Batteries1 x DCF6201 Collated Screw Magazine1 x DT7205-QZ PR2 Collated Screw Bit1 x Single Screw Nose Cone1 x DT7520-QZ Magnetic Bit Extender With 25mm PR2 Screw Bit1 x Multi-Voltage XR Charger1 x TSTAK 2 Kitbox
The Bosch GDR 18V-200 Professional Impact Driver offers an excellent power-to-size ratio. Its small head length of only 126mm makes it perfect for use in tight spaces. Equipped with a brushless motor, it provides excellent battery runtime and a long tool lifetime. A variable speed trigger allows better control over speed and torque. Electronic Motor Protection (EMP) protects the motor against overload and ensures a long life. It also features a handy LED work light, ideal when working in confined spaces and a belt clip. Intended for tightening and removing screws when working in metal sheet, metal and wood. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Tool Holder: 1/4in Hex Uni.No Load Speed: 0-3,400/min.Impact Rate: 0-4,000/bpm.Max. Torque: 200Nm.Max. Screw Diameter: M6 - M16.Weight: 1.1kg excl. battery.
The HiKOKI WH18DAW4Z Multi-Volt Impact Driver has a compact and lightweight design for optimum manoeuvrability. A variable speed trigger provides optimum control during operation. Fitted with an ergonomic soft grip for optimum ease of use and safe, and comfortable handling. There is also an integrated LED light for good illumination of the work area. Specifications: Bit Retainer: 6.35mm.No Load Speed: 0-2,700/min.Impact Rate: 0-3,600/BPM.Max. Torque: 140Nm.Capacity: Ordinary Bolt M5 - M14, High-Tension Bolt M5-M12.Bare Unit Weight: 0.8kg.
The HiKOKI W6VB3 TEKS® Variable Speed Screwdriver features an adjustable depth setting, ideal for TEKS® self-drilling screws and drywall screws. With a forward/reverse selection and a lock-on button for reduced fatigue during long periods of use. The ergonomic body design features a soft grip handle, with improved handle geometry for greater operator comfort. Aluminium gear casing for extended product durability. The soft urethane cover on gear housing prevents damage to the work surface. Detachable nose cone for easy bit replacement, and an extra long 7.5m power cord. Supplied with: 1 x Magnetic Hex Socket, 1 x Nose Cone. Specification: Bit Holder: 6.35mm (1/4in)Input Power: 620WNo Load Speed: 0-2,600/min.Capacity: TEKS: 8mm, Wood: 6.2mm, Drywall: 6mmWeight: 1.5kg
The Bosch GDX 18V-200 Professional Impact Driver/Wrench combines brushless power, a compact design and a 2-in-1 tool holder for highest flexibility. Its unique 2-in-1 tool holder with 1/4in internal hex and 1/2in square drive makes it versatile and ideal for the widest range of applications. A variable speed trigger provides better control over speed and torque. Electronic Motor Protection (EMP) protects the motor against overload and ensures a long life. The ideal choice for tightening and removing screws, when working in metal sheet, metal or wood. It also features a handy LED work light, ideal when working in confined spaces and a belt clip. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Tool Holder: 1/4in Hex Uni, 1/2in Square.No Load Speed: 0-3,400/min.Impact Rate: 0-4,000/bpm.Max. Torque: 200Nm.Max. Breakaway Torque: 350Nm.Max. Screw Diameter: M6 - M16.Weight: 1.2kg excl. battery.
Bosch GDR 18V-210 C Professional Impact Driver with a 1/4in hexagonal bit holder. Delivers powerful performance whilst preventing damage to materials. Two default modes on the user interface, selftapping screw (A) and wood screw (B), mean more control and less broken or stripped off screwheads, worn-out threads, and damaged workpieces by slowing down or shutting off the impact driver. Each mode is customisable via the Bosch Toolbox App. Three speed/torque settings ensure impressive control and greater flexibility on the job. Comes with a status indicator, LED light, and belt clip for greater convenience. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 18V batteries, including ProCORE18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Tool Holder:1/4in Hex Uni.No Load Speed: 0-1,100/0-2,300/0-3,400/min.Impact Rate: 0-2,200/0-3,300/0-4,100/bpm.Max. Torque: 80/60/210Nm.Bolt Size: M6 - M16.Weight: 1.1kg excl. battery.
The Bosch GDR 12V-110 Professional Impact Driver comes with a brushless motor. Its compactness ensures perfect handling, even in the tightest spaces and overhead. For greater accuracy while screwdriving, the impact driver's 2-stage Power Control prevents the overtightening of small screws. Other features include a charge level indicator, Electronic Cell Protection, Li-ion, speed selection, and variable speed. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 12V batteries and chargers (Professional 12V System). Specifications: Tool Holder:1/4in Hex Uni.No Load Speed:0-1,200/0-2,600/min.Impact Rate: 0-2,700/0-3,100/bpm.Max. Torque: 110Nm.Torque Settings: 2.Bolt Size:M4 - M12.Weight: 0.9 kg incl. battery.
The HiKOKI WR36DB Brushless Impact Wrench has a high overload capacity with a 4-mode power selection. The forward/reverse switch provides increased control, making it easy to switch between modes. The compact design is IP56 rated against dust and water ingress, making it ideal for site use. The body features a soft grip handle for increased comfort and reduced user fatigue. There is also a rubber nose protector. For added safety there is an electric brake. Other features include: a 3-mode LED work light (always on, automatic and always off), and a large side hook that can be fitted on the left or right hand side. WR36DB/JRZ: 2 x 18/36V 5.0/2.5Ah Li-ion BatteriesWR36DB/J4Z: Bare Unit, No Battery or Charger Specification: Bit Holder: 12.7mm (1/2in) Square Friction RingNo Load Speed: 0-1,500/min.Impact Rate: 0-2,800/bpmMax. Torque: 1050NmBolt Capacity: Ordinary: M12-30, HT: M10-24Overall Length: 221mmWeight: 3.0kgThe HiKOKI WR36DB/JRZ Brushless Impact Wrench is supplied with: 2 x 18/36V 5.0/2.5Ah Li-ion Batteries*1 x UC18YSL3 Charger1 x Case *Multi Volt batteries for high power output similar to mains powered tools. Batteries are compatible with existing Hitachi/HiKOKI 18V tools.
The Einhell TE-CI 18 LI BL Power X-Change Impact Driver has a brushless motor for increased performance and longer operating times than a conventional carbon brush motor. The finely adjustable electronic speed control can be precisely adjusted to your requirements for the material you wish to work on, so that neither the material nor the impact driver are over strained. For soft and delicate materials in particular, it allows work to be carried out with sensitive operation. It has a short, light-weight design that reduces body stress and fatigue, and the ergonomic soft grip surfaces provide a comfortable and firm hold. For improved vision where visibility is poor there is an LED light. A direction indicator and battery capacity indicator on the machine keep you informed about its current status at all times. The Power X-Change high-speed charger takes 30 minutes to charge the battery. In addition, the battery packs can be used for all products from the Power X-Change family. 4510035: 1 x 18 Volt 4.0Ah Li-Ion Battery.4510030: Bare Unit, No Battery or Charger. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,900/Min.Max Torque: 180Nm.Charging Time: 80 Minutes.Weight: 2.95kg.The Einhell TE-CI 18 LI BL Power X-Change Brushless Impact Driver is supplied with: 1 x 18 Volt 4.0Ah Li-Ion Battery1 x Charger1 x Tool Bag
The DEWALT DCF902 XR Sub-Compact Impact Wrench is 33mm shorter than the previous generation, allowing access into small spaces. It has an efficient brushless motor with 3 electronic speeds for greater control when working on precise applications. Precision Wrench mode allows for the best control in delicate applications. Lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: Bit Holder: 3/8in SquareNo Load Speed: 0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 168NmBare Unit Weight: 0.8kg
The Metabo SSW 18 LTX 300 BL Brushless Impact Wrench is a high torque machine with low kickback torque. Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent overtightening. The unique Metabo brushless motor provides quick work progress and the highest efficiency for any application. Its robust die-cast aluminium gear housing provides optimum heat dissipation and durability. With 12-speed/torque levels for a wide range of applications. There is also an integrated work light for illumination of the work area and a handy belt hook can be fixed either on the right or left side. Ultra-M technology: highest performance, gentle charging and 3-years of warranty on the battery pack. Bare Unit - No Battery or Charger supplied. Specification: Bit Holder: 1/2in Male SquareNo Load Speed: 0-2,650/min.Impact Rate: 3,750/bpmMax. Torque: 300Nm, 12 SettingsMax. Loosening Torque: 480NmMax. Bolt Diameter: M18
