JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Pack of 10JG Speedfit superseal pipe insert contains dual o-rings to provide even greater sealing security than a standard insert. The first o-ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second o-ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main o-ring seal. 2 extra O-Rings provide enhanced sealing Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems Suitable for Speedfit pipes and fittings only
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit and hand-tighten connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 20
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit and hand-tighten connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 30
JG Speedfit cold water service reducing straight connector for the connection of two unequal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service reducing straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 5
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 10
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 5
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 2
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
The John guest 3/8Ó OD x 3/8Ó NPT push-to-connect to male valve is manufactured from white polypropylene and equipped with epdm o-rings utilizing John guestÕs push-fit technology to make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique John guest collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.About this item
John guest push-to-connect technology provides a simple, reliable, leak-free connection
Manufactured from white polypropylene and equipped with EPDM o-rings
Can be used with plastic or soft Copper tubing
Manufactured with FDA compliant materials and NSF 61 and 51 certified
Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics
Pack of 5
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristicsPack of 10
JG Speedfit cold water service reducing straight connector for the connection of two unequal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service reducing straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service stop end that quickly and easily caps off MDPE pipework at termination points on a temporary or permanent basis. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the JG Speedfit cold water service stop end fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK. Enhances sealing for a securer connection Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems
JG Speedfit cold water service stop end that quickly and easily caps off MDPE pipework at termination points on a temporary or permanent basis. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the JG Speedfit cold water service stop end fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90¡ bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90¡ bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK. Enhances sealing for a securer connection Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systemsPack of 75
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK. Enhances sealing for a securer connection Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systemsPack of 50
Need to securely connect three pipes of the same size? If youÕre using the JG Speedfit push-fit system, youÕll need this equal tee connector Ð it can be used with plastic or copper pipes, and is a far faster way of connecting than using traditional methods. Installation is simple Ð you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it. ¥ Install or demount in seconds, without the need for tools ¥ Suitable for hot and cold water services ¥ Can be used on central heating systems and combi systems¥ Minimum operating temperature of 20¡C ¥ Maximum operating temperature of 105¡C ¥ 12 bar maximum operating pressure at minimum temperature ¥ 3 bar maximum operating pressure at maximum temperature ¥ 50-year manufacturerÕs guarantee (T&Cs apply) ¥ Manufactured to BS EN 7291 Parts 1, 2, 3 and S ¥ WRAS-approved ¥ Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0222W Warranty (years)50 Diameter (mm) 22 Pack Size 2Fitting Type Tee Equal or Reducing Equal
JG Speedfit monobloc mixer flexi hose (white PVC) that connects plastic or copper pipe onto a monobloc mixer. The white PVC hose material significantly reduces hose ÔkinkingÕ and makes the product easier to clean. On one end the hose features a push-fit connection for a supply pipe. On the other end there is a monobloc connection which can be installed on to a monobloc tap. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit monobloc mixer flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 ¡C)Pack of 10
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. Pack of 5The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. Pack of 2The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
