Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.Outside Diameter:- 1/2inInside Diameter:- 1/4inThickness:- 3/16in
The Faithfull Aluminium Wide Track Cutting Guide makes easy work of marking out and cutting sheet materials. Lightweight, rigid design for effortless handling. The easy-to-operate lever action jaws have large, soft grip clamping surfaces that securely lock on to the workpiece. The extra wide and thick reinforced aluminium profile offers increased durability over many other similar products. Two integrated T-slots accept M6 bolt heads to attach workshop accessories. The heat-treated zinc plated clamping bar and glassfibre reinforced nylon jaws ensure the clamp will have a long working life. Ideal for use with plywood, MDF, most other sheet materials, and for cutting doors and worktops to size. It can also be used as a clamp when gluing smaller panels together. They can be used as a guide for jigsaws, routers and circular saws, as well as marking pencils and knives. Available in two sizes with a surface clamping capacity of either 900mm (36in) or 1250mm (50in).1 x Faithfull Aluminium Wide Track Cutting Guide 1250mm (50in)
Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/4in Shank. R = 4.8 mmD = 28 mmd = 25.7 mmB = 16 mm
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.The TRE8127 Collet Sleeve has the following specifications:Diameter: 12.7mm (1/2in).Bore: 8mm.Overall length: 30mm.
Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters.Tooling :TC1/4in Shank. D =22 mmC =12.6 mmR =1/4 inchR =6.3 mmP =9 mm
Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters.Tooling :TC1/4in Shank. D =26 mmC =14.3 mmR =5/16 inchR = 8.0 mmP =9mm
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.The TRE63127 Collet Sleeve has the following specifications: Diameter: 12.7mm (1/2in)Internal Bore 6.35mm (1/4in)Bore: 8mm.Overall length: 30mm.
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 5 mmC = 12 mmOL = 60 mm
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2 in Shank. Angle A = 90° D = 19.1 mmC = 50 mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 19 mm 3/4 in
Ovolo and rounding over cutters are ideal for panel work and edge moulding, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters. Specifications: Tooling: T.C1/4in Shank.D =3/8 inch.D =9.5 mm.D2=3.2 mm.C =9 mm.R =2.5 mm.
Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals.For use with 4 mm drill bit (not included).
These well proven adjustable countersinks are all supplied complete with an HSS twist drill and a hexagon key.They are designed to drill and countersink simultaneously a wide variety of materials.Choose TCT for abrasive materials. NOT SUITABLE FOR FERROUS AND NON FERROUS METALS. T.C.T.No.8 Wooscrew.Diameter: 5/8in.Drill Diameter: 3/16in.Overall Length: 1.1/4in.
These combination tools in TCT can be used in abrasive materials.They will drill, countersink and finally counterbore a parallel hole.Designed to receive plug maker group 24.The drill diameter sizes are for a clearance hole only.For use with drilling machines or routers. Specifications: T.C.T.1/4in Shank.Woodscrew Size. No.10.Drill Diameter 7/32in.Countersink Diameter. 12mm.Drill Length. 20mm.
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 4 mm Diameter.C = 16 mm Depth of Cut.OL = 90 mm
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 8 mmC = 14 mmOL = 80 mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Angle A = 90 D = 18.2 mmC = 50 mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 15 mm 19/32in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 63 mmD = 12.7 mm 1/2 in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.Ideal for cutting kitchen worktops. This cutter is especially suited for drilling. C = 50 mmD = 12.7 mm 1/2 in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 6.3 mm 1/4in
Trend D-Namic two flute cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass.C = 19 mm D = 6.3 mm 1/4 in
Chamfer V grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on the nose. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.Tooling : T.C.T.1/4in Shank.A = 45° D = 19.1 mmC1 = 9.2 mmC2 = 13 mm
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2 in Shank. Angle A = 90° D = 19.1 mmC = 25.4 mm
