Bahco 2681 Riveter is a swivel head rivet tool, the head swivels 360° to rivet at any angle. Will fasten metal, leather, canvas, and vinyl using 2.4, 3.2, 4.0 or 4.8mm rivets. With 4 interchangeable nosepieces which can be stored in the handle. Length: 285mm. Weight: 740g.
A smooth paste which has been developed for use when installing or repairing pipework for water, heating and gas services etc.Water soluble, this flux is manufactured in line with the recommendations of MARC, offering good penetration of surface oxide with no pre-cleaning necessary.Size: 350g.
The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nosepiece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole. To change hole size simply loosen screw on nosepiece plate, swing pivot plate around then re-tighten screw.Riveter only without any rivets supplied
Heavy-duty hand riveter with easy to change heads. Complete with spanner to change the heads.Also supplied with:4 x interchangeable tips: 2.4, 3.2, 4.0 and 4.8mm.60 x Rivets: 2.4x6mm, 3.2x8mm, 4.0x8mm, 4.8x8mm.
Weller W101D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260°C, 316ºC, 425ºC and 480ºC. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 100WVoltage: 230V
The Stanley MR77 all-steel riveter has a head that rotates 360° for use at any angle. It has 4 nosepieces and a wrench store in its handle for versatility and convenient storage. It accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications.
The Rapid High Performance Rivets have high grade aluminium heads and steel pins. Ideal for all applications, these extra strong multipurpose rivets ensure a permanent fix. They are ideal for use on licence plates, mudguards, metal and plastic coverings, name places, metal sheets and repair work. Each pack is supplied with a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters.Specifications:Size: 4.8 x 10mm.Grip range: 4-7mm.Pack: Blister of 50.
The Rapid High Performance Rivets have high grade aluminium heads and steel pins. Ideal for all applications, these extra strong multipurpose rivets ensure a permanent fix. They are ideal for use on licence plates, mudguards, metal and plastic coverings, name places, metal sheets and repair work. Each pack is supplied with a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters.Specifications:Size: 4 x 14mm.Grip range: 8-10mm.Pack: Blister of 50.
A complete assortment of 120 Aluminium and Steel Rivets in a reusable plastic container. Contents:25 - 1/8in Short Aluminium Rivets.20 - 1/8in Medium Aluminium Rivets.15 - 1/8in Long Aluminium Rivets.25 - 1/8in Short Steel Rivets.20 - 1/8in Medium Steel Rivets.15 - 1/8in Long Steel Rivets.
The Rapid Standard Rivets have standard aluminium heads and steel pins. They are suitable for use in decorating, repair of metal and automotive applications and can be used on sheet metal, hard plastic and leather parts. Suitable for the RP10, RP40, RP60 ad RP101 Riveters.Specifications:Size: 4.8 x 16mmGrip range: 9-12mm.Pack: Bag of 100.
This Faithfull Heavy-Duty Riveter has a 360° rotating head that will allow for the application of rivets in restricted spaces and difficult locations. The jaws are made from hard wearing chrome molybdenum steel for longer life. It has a lightweight yet strong aluminium body with built-in spare nozzle storage. The soft-grip handle offers user comfort and storage for the nozzle spanner. Ideal for use in automotive applications, mudguards, license plates, metal repairs, etc. Specification Rivet Type Accepted: Aluminium, Steel and Stainless SteelRivet Diameter: 2.4, 3.2, 4.0 and 4.8mmLength: 280mm (11in)
The Rapid stainless steel rivets are made from ISO 304 standard stainless steel and are ideal for use with Rapid Hand Riveter tools. Ideal for all applications, these hardwearing and long lasting rivets ensure a permanent fix. They are particularly useful in humid areas and outside areas, on number plates, mudguards, metal coverings, greenhouses, lawnmower coverings and metal sheet roofing. Each pack is supplied with a drill. Suitable for the RP40 and PR100 riveters.Specifications:Size: 4.8 x 10mm.Grip range: 4-7mm.Pack: Blister of 50.
The Rapid stainless steel rivets are made from ISO 304 standard stainless steel and are ideal for use with Rapid Hand Riveter tools. Ideal for all applications, these hardwearing and long lasting rivets ensure a permanent fix. They are particularly useful in humid areas and outside areas, on number plates, mudguards, metal coverings, greenhouses, lawnmower coverings and metal sheet roofing. Each pack is supplied with a drill. Suitable for the RP40 and PR100 riveters.Specifications:Size: 4 x 14mm.Grip range: 8-10mm.Pack: Blister of 50.
The Rapid stainless steel rivets are made from ISO 304 standard stainless steel and are ideal for use with Rapid Hand Riveter tools. Ideal for all applications, these hardwearing and long lasting rivets ensure a permanent fix. They are particularly useful in humid areas and outside areas, on number plates, mudguards, metal coverings, greenhouses, lawnmower coverings and metal sheet roofing. Each pack is supplied with a drill. Suitable for the RP40 and PR100 riveters.Specifications:Size: 3.2 x 8mm.Grip range: 2-4mm.Pack: Blister of 50.
The Rapid stainless steel rivets are made from ISO 304 standard stainless steel and are ideal for use with Rapid Hand Riveter tools. Ideal for all applications, these hardwearing and long lasting rivets ensure a permanent fix. They are particularly useful in humid areas and outside areas, on number plates, mudguards, metal coverings, greenhouses, lawnmower coverings and metal sheet roofing. Each pack is supplied with a drill. Suitable for the RP40 and PR100 riveters.Specifications:Size: 4.8 x 18mm.Grip range: 12-14mm.Pack: Blister of 50.
The Rapid stainless steel rivets are made from ISO 304 standard stainless steel and are ideal for use with Rapid Hand Riveter tools. Ideal for all applications, these hardwearing and long lasting rivets ensure a permanent fix. They are particularly useful in humid areas and outside areas, on number plates, mudguards, metal coverings, greenhouses, lawnmower coverings and metal sheet roofing. Each pack is supplied with a drill. Suitable for the RP40 and PR100 riveters.Specifications:Size: 4.8 x 25mm.Grip range: 19-22mm.Pack: Blister of 50.
The Rapid High Performance Rivets have high grade aluminium heads and steel pins. Ideal for all applications, these extra strong multipurpose rivets ensure a permanent fix. They are ideal for use on licence plates, mudguards, metal and plastic coverings, name places, metal sheets and repair work. Each pack is supplied with a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters.Specifications:Size: 4.8 x 25mm.Grip range: 19-22mm.Pack: Blister of 50.
Convenient and economical to use, applied easily by brush, swab or spray, to cold surfaces and then heated to melt the solder and make the joints. Only a thin coat is needed and, as the solder and flux are both applied at once, it saves time. Used in a myriad of industrial jointing applications and a firm favourite with modellers, Fryolux is a uniform mixture of finely powdered tin/lead solder and zinc chloride activated flux. It has a creamy consistency and is reported to be ideal for pre-tinning, solder coating and soft solder assembly.Size: 125g.
Stanlet MR55 All steel riveter with an easy spring-loaded handle, which ejects the rivet stem. It has 4 nosepieces and a wrench store in the handle for versatility and convenient storage and accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications. Rugged steel construction for long-lasting durability.
The ForgeFix Dome Head Rivet has a steel-plated stem and Aluminium head which provides a neat appearance with a low profile. This rivet is the most versatile and commonly specified head style. The dome head has a diameter double that of the rivet body providing more than sufficient bearing surface to retain all but the extremely soft or brittle materials.The rivet assembly is inserted into a hole drilled through the parts to be joined together and can be finally fixed by use of a hand held or pneumatic rivet gun.
The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nosepiece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole. To change hole size simply loosen screw on nosepiece plate, swing pivot plate around then re-tighten screw.The kit includes an interchangeable nosepiece and a selection of 1/8, 5/32 and 3/16in rivets.
A professional all steel construction riveter with comfortable vinyl grip.Spring loaded handle for easy rivet loading and ejection.Extended nose for hard-to-get at places and will lock when not in use.Complete with four nosepieces to take 3/32, 1/8, 5/32 and 3/16 rivets.
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.Type: AluminiumDiameter: 3.2mmLength: Short 6mmGrip range: 1-3mmPack qty: 1000
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.Specifications: Type: Aluminium. Diameter: 4.8mm. Length: Medium 11mm. Grip range: 4.5-6.5mm. Pack Quantity: 50.
The Rapid RP60 MULTI™ Pivoting Head Riveter is fitted with a unique multi-nozzle that fits all rivets, so it can be operated without nozzle changes. This means fewer interruptions and optimal results when working on any kind of sheet metal job. It is also equipped with a 360° pivoting head that improves access to tight working spaces. The RP60 MULTI™ is also equipped with a smart measuring control system that measures rivet dimensions and material thickness. Now you can be sure the right rivet is used in the right hole. Other features include a soft grip handle for maximum comfort, hardened metal parts for longer product life and a stylish matt black finish. Ideal for automotive work, mudguards, licence plates, metal covering, damaged surfaces, name plates, etc. Comes with a 3 year guarantee. Specification: Rivet Diameter: 3.2, 4.0 & 4.8mmRivet Material: AluminiumSize: 30 x 345 x 170mmWeight: 0.62kg
