The Evolution FURY 5-S Plus Multi-Purpose Table Saw is ideal for any home workshop. The FURY 5-S provides tremendous cutting versatility including, cross cut, mitre cut, bevel cut, straight cut for large or small applications. It will easily cut steel, aluminium, wood (even wood with nails) and plastic, using just one blade. Features a rip fence that is solid and sturdy in every position for essential cutting security, furthermore, the included anti-bounce device minimises material movement. Supplied with: 1 x Multipurpose Blade 255 x 25.4mm Bore x 24T1 x Fine Wood Blade 255 x 25.4mm Bore x 60T2 x Table Extensions4 x Extension Table Support Struts2 x Blade Changing Tools1 x Mitre Gauge1 x Anti-Bounce Device1 x Adjustable Rip Fence2 x Rear Cantilever Braces1 x Push Stick2 x Fence Rails1 x Table Saw Stand (requires assembly)1 x Hex Key1 x Spanner1 x Fence Locating Bar1 x Instruction Manual Specification: Input Power: 1,500WNo Load Speed; 3,250/min.Capacity: Wood 32mm, Mild Steel Plate/Box Section 3mmMax. Cutting Depth: 90° 85mm, 45° 65mmTable Dimensions: 583 x 901mmRiving Knife Thickness: 1.8mmBlade: 255 x 25.4mm Bore x 24TWeight: 20.14kg
The DEWALT DCS397 FlexVolt XR Alligator Saw is fitted with a durable, high power brushless motor for the toughest applications. Fitted with two saw blades that run in opposite directions, so the material will not move while cutting. Aluminium gearcase housing for lower weight and excellent durability, that is also dust sealed along with the bearings for increased durability. Ideal for cutting Class 12 clay block (Poroton). DCS397T2: 2 x 18/54V 6.0/2.0Ah XR Li-ion Batteries.DCS397N: Bare Unit, No Battery or Charger. Specification No Load Speed: 2,400/min.Stoke Length: 40mm.Blade Length: 430mm.The DEWALT DCS397N FlexVolt XR Alligator Saw is supplied as a Bare Unit NO battery or charger supplied.
The Einhell TE-AP18LI Power X-Change Cordless Universal Saw is the smallest saw of its class and a versatile tool which demonstrates its strong points on a wide spectrum of sawing jobs, whether on the building site, in the workshop or in the garden. This particularly light and handy saw is equipped with a unique Triathlon motor providing excellent power, speed and efficiency. There is a toolless blade change for added convenience and the adjustable soleplate provides optimum blade use. The design features ergonomic soft grip surfaces and rubber supports to protect the housing. It is a member of the Power X-Change family and is powered by lithium ion rechargeable batteries with a battery management system for a long life. The tool is supplied WITHOUT a battery and charger but it can be powered by Power X-Change rechargeable batteries. Specification No Load Speed: 0-2,600/min.Strokes at No Load: 22mm. Capacity: Wood: 100mm, Steel: 6mm.
The DEWALT DCS373 XR Metal Cutting Circular Saw has an extremely durable tool design with a steel shoe that has been designed to withstand rough job site conditions. An intelligent trigger allows total control over all applications. The lock off switch and electronic motor brake provide additional control and work safety. Fitted with a spindle lock for quick and easy blade change. The transparent front guard LED light and unique chemically treated glass window provide enhanced line of cut visibility. The saw has an ergonomic design and rubber grip increase comfort. Supplied as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,700/min.Max. Cutting Depth: @90° 43mmBlade: 140 x 20mm BoreWeight: 3.1kg
The DEWALT DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. It has an extremely durable tool design, including a cast magnesium base, which allows repetitive, accurate cuts. With an ergonomic handle set with rubber overmold, the saw provides optimum comfort to the user. Is an efficient cordless solution in trimming wood panels and chipboards. DCS391M2: 2 x 18V 4.0Ah XR Li-ion Slide On Battery Packs.DCS391N: Bare Unit, No Battery or Charger Supplied. A 165mm Carbide Blade, Hex Key and Dust Port are supplied as standard. Specfication No Load Speed: 5,150/min.Max. Cutting Depth: @90°: 55mm, @45°: 42.1mmBlade: 165 x 20mm BoreWeight: 3.8kgDEWALT DCS391M2 165mm XR Premium Circular Saw 18 Volt Supplied with 2 x 18 Volt 4.0Ah XR Li-ion Slide On Battery Packs, 1 x Multi-Voltage DCB105 XR Universal Charger, 1 x 165mm Carbide Blade, 1 x Hex Key and 1 x Dust Port.
The DEWALT DWS777 216mm XPS Crosscut Mitre Saw has been fully upgraded from the previous model. It includes XPS Shadow Line cut technology for accurate alignment and a DEWALT Airlock compatible dust port. It has a traditional pull and tilt design. The fence and base have been re-engineered to new standards making this saw more accurate and heavy-duty. There's a new head lock feature which enables users to fix the head of the saw and therefore restrict the traverse, perfect for trimming and groove cutting. With 5 pre-set mitre stops at 0°/15°/22.5°/30°/45°, as well as fixed left and right hand fences with measurements on them. Supplied with 24 tooth TCT blade. Specifications: Input Power: 1,800WNo Load Speed: 6,300/min.Blade: 216 x 30mm BoreCapacity: Max. Depth: 62mm, Max. Cross Cut: 270mmMitre Cut (Right/Left): 50°/-50°Bevel Capacity: 48°Weight: 14kgDEWALT DWS777 216mm XPS Crosscut Mitre Saw 110 Volt Version
The DEWALT DCS520 XR FlexVolt Plunge Saw has a brushless, heavy-duty motor which offers the same power as a mains tool. Making it perfect for plunging into wide variety of materials whilst offering consistant speed and an accurate cut under heavy loads. It features an anti-kickback system which allows the user to go about cutting tasks with no fear of injury. It will also achieve 90% extraction when fitted to an extractor and used with the closed guard, making it a perfect choice for mobile plunge cutting on site. DCS520T2: 2 x 18/54 Volt 6.0/2.0Ah XR Li-ion Batteries.DCS520N: Bare Unit, No Battery or Charger. Specification No Load Speed: 2,500-4,200/min.Depth of Cut: @90º: 59mm, @45º: 44mm.With Guide Rails: @90º: 55mm, @45º: 40mm.Blade: 165x20mm BoreBevel Capacity: 47Weight: 4.7kgThe DEWALT DCS520N FlexVolt XR Plunge Saw 54 Volt is supplied as a Bare Unit, No battery or charger supplied.
The DEWALT DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. It has an extremely durable tool design, including a cast magnesium base, which allows repetitive, accurate cuts. With an ergonomic handle set with rubber overmold, the saw provides optimum comfort to the user. Is an efficient cordless solution in trimming wood panels and chipboards. DCS391M2: 2 x 18V 4.0Ah XR Li-ion Slide On Battery Packs.DCS391N: Bare Unit, No Battery or Charger Supplied. A 165mm Carbide Blade, Hex Key and Dust Port are supplied as standard. Specfication No Load Speed: 5,150/min.Max. Cutting Depth: @90°: 55mm, @45°: 42.1mmBlade: 165 x 20mm BoreWeight: 3.8kgDEWALT DCS391N 165mm XR Premium Circular Saw 18 Volt Bare Unit, No Battery or Charger Supplied.
The DEWALT DCS331 XR Premium Jigsaw is fitted with a powerful & highly efficient PM47 fan-cooled motor, that features replaceable brushes. Delivering a fast cutting action, up to 3000 strokes per minute, maximising user productivity. The intelligent variable speed trigger & lock-off switch provide quick controlled cuts and enhanced work safety. It's 3-position pendulum action controls the aggressiveness or smoothness of cuts. The tool free adjustable shoe with anti-scratch cover bevels 45°, in both directions. Uses a quick and easy patented keyless blade change system, that accepts T-shank blades. It's modular component design provides trouble free servicing whilst the patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation. There is also a dust blower that keeps line of cut clear of dust and debris. DCS331M2: 2 x 18V 4.0Ah XR Li-ion Batteries. DCS331N: Bare Unit, No Battery or Charger. Specification Strokes No Load: 0-3,000/min.Stroke Length: 26mm.Bevel Capacity: 45°.Capacity: Wood: 135mm, Metal: 10mm.The DEWALT DCS331N XR Premium Cordless Jigsaw 18 Volt is supplied as a Bare Unit, NO battery or charger supplied.
The HiKOKI C7SB3 Heavy-Duty Circular Saw is fitted with a high power motor, ideal for extra heavy-duty applications. The high-tech magnesium gear case and guard reduces weight and improves strength. It has a rugged alloy base, that is easy to recalibrate and an anti-slip handle with large front grip for excellent control. There is also a spindle lock for easy disc change. Supplied with: 1 x 185mm TCT Blade, 1 x Wrench, 1 x Parallel Guide, 1 x Adaptor for Dust Collecting, 1 x Carry Case. Specification: Input Power: 1,710WNo Load Speed: 6,000/min.Max. Cutting Depth: 90° 62mm, 45° 47.5mmBlade: 185mmOverall Length: 304mmWeight: 4.3kg1 x HiKOKI C7SB3 Heavy-Duty Circular Saw 110V version.
The Einhell TE-JS 18Li Power X-Change Cordless Jigsaw is a powerful tool for diverse sawing jobs. The selectable pendulum action, with 4 settings, and smooth operation enable fast and precise cuts. The universal blade holder without tools saves valuable time, while the integrated plastic sliding element protects sensitive work pieces. Includes a dust blow-off function for optimum visibility, LED light to illuminate the cutting area and an additional attachable cutting line guide for exact cutting. It is a member of the Power X-Change family and is powered by lithium ion rechargeable batteries with a battery management system for a long life. TE-JS 18 Li Kit: 1 x 2.0Ah Power X-Change Li-ion Battery. TE-JS 18 Li Solo: Bare Unit, No Battery or Charger. Specification Strokes at No Load: 2,400/min.Stroke Length: 25.4mm. Capacity: Wood: 80mm, Plastic: 12mm, Steel: 10mm.Bevel Capacity: 45°.Weight: 1.81kg.The Einhell TE-JS 18Li Power X-Change Cordless Jigsaw is supplied as a Bare Unit, No Battery or Charger.
The Bosch GST 150-BCE Professional Bow Handle Jigsaw has high power reserves, even in hard and thick beams, due to powerful and overload-capable 780 Watt motor. It is fitted with an extremely robust and bend-resistant sole plate for the toughest jobs. High cutting precision due to new saw blade clamping system. The tool-free saw blade clamping system for easy and fast saw blade changes and an ergonomic grip area with softgrip surfaces for a high level of work comfort. The 4-stage pendulum action allows for fine through to coarse cuts. Electronic speed preselection saves time when working with multiple applications. Specifications: Input Power: 780W.Strokes at No Load: 500-3,100/min.Stroke Length: 26mm.Bevel Capacity: 0-45º.Capacity: Non-Alloyed Steel: 10mm, Wood: 150mm, Aluminium: 20mm.Cable Length: 4m.Weight: 2.6kg.
The Evolution R185CCSX Circular Track Saw is ideal for both trade and DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-20CS blade (supplied) it can cut through a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. The saw features an adjustable cutting depth and 0-45 _ bevel capabilities for versatile cutting in any material. It also features channelled air flow and a vacuum extraction port, that helps to keep the cutting line visible. The electric blade brake and blade guard (that closes in 0.4 seconds) improves user safety and reduces exposure to a spinning saw blade. Supplied with 1020mm of track which is perfect for making straight cuts in long or sheet materials with ease. The saw is also compatible with the Evolution ST1400 and ST2800 tracks (sold separately). These saws have been developed to be compatible with most leading brands of circular saw tracks. Specification: Input Power: 1,600WNo Load Speed: 240V: 3,900/min., 110V: 3,700/min.Capacity: Mild Steel Plate/Box Section 3mmMax. Cutting Thickness With/Without Track: 0°: 64/59mm, 45°: 47/42mmBlade: 185 x 20mm Bore, 16TBevel Capacity: 0-45°Cable Length: 3mWeight: 5.1kg Evolution R185CCSX Circular Track Saw 185mm 240V Version
The Evolution F255SMS Multi-Material Sliding Mitre Saw utilises patented Evolution multipurpose cutting technology and will cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. Laser guidance provides optimum accuracy and the robust outer casing enhances durability. The F255SMS Mitre Saw is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish. Supplied with: 1 x FURY® Multipurpose TCT Circular Saw Blade 255 x 25.4mm x 24T, 1 x F255SMS Work Piece Top Clamp, 1 x Dual Ended (Blade Change) Allen Key 4 & 6mm & 1 x Dust Bag. Specification: Input Power: 1,600WNo Load Speed: 3,750/min.Cutting Capacity (W x D): Cross Cut (0° x 0°): 300 x 80mm, Bevel Cut (0° x 45°): 300 x 45mm, Mitre Cut (45° x 0°): 210 x 80mm, Compound Cut (45° x 45°): 210 x 45mmBlade Size: 255 x 25.4mm BoreMax. Mitre Left/Right: 50°/50°Max. Bevel Left: 45°Dust Port Ø: 35mmCable Length: 2mWeight: 15.4kg
The DEWALT DCS365 Cordless XPS Mitre Saw is fitted with a double insulated 65mm fan cooled motor with replaceable brushes for maximum power in hard wood. The mitre angle adjustment system provides accurate and consistent setting of mitre angles between 0 and 60° right and 0 and 50° left. It has a large dual sliding fence mechanism that gives maximum support in large material cuts at any angle or combination of angles. Horizontal rails create additional capacity for larger materials. The aluminium base construction provides stability to the saw while still retaining its portability. With mitre and bevel angle detents for quick and easy set up of the saw. DCS365M2: 2 x 18V 4.0Ah XR Li-ion BatteriesDCS365N: Bare Unit, No Battery or Charger Supplied Specification No Load Speed: 3,750/min.Blade: 184 x 16mm BoreCapacity (mm): 90°/90°: 250x50, 90°/45°: 250x35, 45°/90°: 176 x 50, 45°/45°: 176x35Mitre Cut (Right/Left): 48°/48°Bevel Capacity (Left): 48°Weight: 11.5kgThe DEWALT DCS365M2 Cordless XPS Mitre Saw is supplied with the following: 2 x 18V 4.0Ah XR Li-ion Batteries. 1 x Charger
The DEWALT DWS780 is a 305mm Compound Slide Mitre Saw offering outstanding cutting performance in both small profiles and large construction timbers. XPS shadow line cut indicator which provides a fast accurate alignment of the blade while illuminating the workpiece for increased productivity no adjustment required. Heavy-duty durability with the ability to fully adjust the machine to maintain accuracy over the life of the tool. Quick release bevel stop setting provides accurate and simple setting of bevel angles up to 49° left and right. Cam action mitre lock function makes mitre setting faster and easier allowing the user to quickly angles between 0° - 50° left and 0° - 60° right. Supplied with: 1 x 305mm 60 Tooth Blade, 1 x Blade Spanner, 1 x Dust Bag and 1 x Material Clamp. Specification Input Power: 1,675WNo Load Speed: 1,900 - 3,800/min.Blade: 305 x 30mm BoreCapacity (mm): 90°/90°: 303x110, 90°/45°: 211x112, 45°/90°: 268x63, 45°/45°: 212x76Mitre Capacity (Right/Left): 60°/50°Bevel Capacity: 49°/49°Weight: 24.8kgDEWALT DWS780 305mm Sliding Compound Mitre Saw 1675W 110V Version.
DEWALT DW872 Metalica Chopsaw has a high power 2200 Watt motor with electronic soft start for metal cutting. The 25.4 mm arbor fitment takes a variety of metal saw blades, whilst the large tool-free pivoting fence for parallel and mitre cuts up to 45°. Robust cool-running 355 mm, 70 tooth tungsten carbide tipped blade which also gives burr-free cuts at constant cutting depth throughout the life of the blade. The quick retracting guard that gives increased visibility. The ergonomically designed horizontal handle gives greater comfort and the vertical clamping system allows for greater safety. Extra wide steel base gives a larger working area and increased stability and features a easy-handling transport lock-mode. Specification Input Power: 2,200 Watt.No Load Speed: 1,300/min. Max. Cutting Capacity at 90 ° Square Profile 100 x 100 mm.Max. Cutting Capacity at 90 ° Rectangular Profile 75 x 130 mm.Max. Cutting Capacity at 90 ° Rounded Profile 130 mm.Max. Cutting Capacity at 90 ° L Shape Profile92 x 92 mm. Max Cutting Capacity at 45° Square Profile79 x 79 mm.Max Cutting Capacity at 45° Rectangular Profile79 x 123 mm. Max Cutting Capacity at 45° L Shaped Profile56 x 56 mm.Max Cutting Capacity at 45° Rounded Profile 79 mm. Weight: 22.5kg.DEWALT DW872 355mm Metalica Chopsaw 2200 Watt 240 Volt Version
The Evolution R185CCSX Circular Track Saw is ideal for both trade and DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-20CS blade (supplied) it can cut through a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. The saw features an adjustable cutting depth and 0-45 _ bevel capabilities for versatile cutting in any material. It also features channelled air flow and a vacuum extraction port, that helps to keep the cutting line visible. The electric blade brake and blade guard (that closes in 0.4 seconds) improves user safety and reduces exposure to a spinning saw blade. Supplied with 1020mm of track which is perfect for making straight cuts in long or sheet materials with ease. The saw is also compatible with the Evolution ST1400 and ST2800 tracks (sold separately). These saws have been developed to be compatible with most leading brands of circular saw tracks. Specification: Input Power: 1,600WNo Load Speed: 240V: 3,900/min., 110V: 3,700/min.Capacity: Mild Steel Plate/Box Section 3mmMax. Cutting Thickness With/Without Track: 0°: 64/59mm, 45°: 47/42mmBlade: 185 x 20mm Bore, 16TBevel Capacity: 0-45°Cable Length: 3mWeight: 5.1kg Evolution R185CCSX Circular Track Saw 185mm 110V Version
The Evolution R185CCSX Circular Track Saw is perfect for trade or DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-16CS blade (supplied) it can cut a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. Advanced safety features such as channelled air flow and vacuum extraction port help keep the cutting line visible, whilst the electric blade brake and blade guard, that closes in 0.4 seconds, reduce the time the user is exposed to a spinning saw blade. Supplied with: 1 x Multi-Material Blade 185 x 20mm Bore x 16T, 3 x 340mm Cutting Tracks, 1 x Connector Bar, 4 x Screws, 1 x Hex Key, 1 x Parallel Edge Guide, 1 x Dust Hose Connector, 1 x Instruction Manual. Specification Input Power: 1,600WNo Load Speed 240V/110V: 3,900/3,700/min.Cutting Capacities: Mild Steel Plate/Box Section: 3mmMax. Cutting Thickness:0° 64mm/59mm with track45° 47mm/42mm with trackMax. Blade Bevel Angle: 45°Blade: 185 x 20mm x 16TPower Cable Length: 3mWeight: 5.1kg Evoultion R185CCSX Circular Track Saw Kit 185mm 240V Version.
The Evolution R185SMS+ 185mm Multi-Material Sliding Mitre Saw can cut a variety of materials, such as mild steel, aluminium, wood with embedded nails, plastic, copper and more. Cuts mild steel with no heat, no burrs and virtually no sparks, leaving ready-to-weld cuts making it perfect for efficient on-site use. This invaluable tool for the home and professional workshop slices through reclaimed timber with ease and even through embedded nails, screws and staples. Dual quick-release clamps for additional accuracy and faster adjustments. Whilst the slide rail protector protects against damage and prevents dust ingress. It has a dust collection bag and a dust port adaptor for use with vacuum extraction for a cleaner working environment. The integrated carry handles make it easy to carry and transport around the workplace. Supplied with: 1 x R185TCT-20MS Multi-Material Blade, 1 x 3 Piece Hold Down Clamp, 1 x Dust Collection Bag and 1 x Dust Port Adaptor Specification: Input Power: 1,200WNo Load Speed: 3,700/min.Max. Mitre (Left/Right): 50°/50°Max. Bevel (Left/Right): 0û-45ûBlade: 185 x 20mm BoreDust Port Ø: 36mmCable Length: 3mWeight: 8.9kg Cutting Capacity: Max. Thickness Mild Steel Plate: 6mmMax. Wall Thickness Mild Steel Box Section: 3mm (50mm mild steel box section)Max. Section Wood: 210 x 56mmMin. Work Piece Size: L125 x W:30 x D:3mm Max. Cutting Angles (Width x Depth):Cross Cut (0° x 0°): 210 x 56mmBevel Cut (0° x 45°): 210 x 38mmMitre Cut (45° x 0°): 145 x 56mm Compound Cut (45° x 45°): 145 x 38mmEvolution R185SMS+ 185mm Multi-Material Sliding Mitre Saw 240V Version
The Evolution F210CMS TCT Multipurpose Compound Mitre Saw utilises patented Evolution multipurpose cutting technology and will cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. The top clamp and extendable fence provide increased work piece support for larger jobs. The F210CMS Compound Mitre Saw is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish. It is lightweight and portable, fitted with an integrated carry handle. The compact design makes it easy to store after use. Supplied with: 1 x FURY® Multipurpose TCT Circular Saw Blade 210 x 25.4mm x 20T, 1 x F210CMS Work Piece Clamp, 1 x (Blade Change) Allen Key 6mm and 1 x Dust Bag Specification: Input Power: 1,200WNo Load Speed: 3,750/min.Cutting Capacity (W x D): Cross Cut (0° x 0°): 125 x 55mm, Bevel Cut (0° x 45°): 125 x 35mm, Mitre Cut (45° x 0°): 85 x 55mm, Compound Cut (45° x 45°): 85 x 35mmMax. Bevel Left: 45°, Max. Mitre Left/Right: 50°/50°Blade Size: 210 x 25.4mm BoreDust Port Ø: 35mmCable Length: 2mWeight: 5.8kg
The Olympia Tools® Jigsaw has a powerful motor. Its adjustable steel base allows for bevel cuts up to 45°. Fitted with an ergonomic soft grip for increased user comfort. Dust extraction is possible via an adaptor (supplied), enabling you to keep the workplace clean and free of debris. Supplied with: 1 x Vacuum Cleaner Adaptor and 1 x Hex Key. Specification: Input Power: 450WStrokes at No Load: 3,000/min.Stroke Length: 18mmBevel Capacity: 45°Capacity: Steel 6mm, Wood 55mmWeight: 2.0kg
