The DeWALT DCF860N XR Impact Driver has a high performance brushless motor which extends tool life and allows for a much shorter design. It also features a 3 mode switch for enhanced control. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode, provides 20 minutes of bright continuous light.Comes as a Bare Unit, NO battery or charger supplied.Specifications:No Load Speed: 0-1,800/0-2,800/0-3,800/min.Impact Rate: 0-4,400/bpm.Max. Torque: 282Nm.Weight: 1.09kg.
The DeWALT DCF870N XR Hydraulic Impact Driver has a powerful brushless motor delivering high performance, extends tool life and allows for a much shorter design. The quiet hydraulic mechanism delivers high speed application with reduced impact noise. It also features a 3 mode switch for enhanced control. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode, providing 20 minutes of bright continuous light.Comes as a Bare Unit, NO battery or charger supplied.Specifications:No Load Speed: 0-1,100/0-3,000/min.Impact Rate: 0-4,200/bpm.Weight: 1.32kg.
DEWALT DCG406N XR Brushless Angle Grinder with paddle switch operation. An electronic brake stops the wheel quickly when the trigger is released, whilst an electronic clutch reduces the kickback reaction in the event of a pinch or stall. A mesh cover restricts dust being sucked through the motor, prolonging motor life. The ergonomic design includes a rubber overmould for increased grip and comfort. Its two-position side handle allows for greater comfort and control. Bare Unit - No Battery or Charger supplied. Specification: No Load Speed: 9,000/min.Max. Disc Diameter: 125mm.Spindle Thread: M14.Weight: 1.75kg.
The DEWALT DCF923 XR Impact Wrench has an efficient brushless motor and 3/8in square drive with hog ring for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Supplied as a Bare Unit - No Battery or Charger. Specification: Bit Holder: 3/8in Hog RingNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)
The DEWALT DCF891 XR 1/2in Hog Ring Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility. The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.The DEWALT DCF891N XR Brushless 1/2in Hog Ring Anvil Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DWE490 230mm Angle Grinder has an abrasion protected motor for increased durability. The two position side handle allows the user to optimise the handle position to give maximum comfort. The grinder has a brush window for quick brush replacement and a spindle lock for quick wheel changes. Supplied with: 1 x Protective Guard, 1 x Side Handle, 1 x Inner & Outer Disc Flanges and 1 x Spanner. Specification Input Power: 2,000 Watt. No Load Speed: 6,600/min.Max. Disc Diameter: 230mm.Spindle Thread: M14.Length: 490mm.Height: 151mm.Weight: 5.2kg.
The DEWALT DWP849X Variable Speed Polisher with rubber overmoulded gear casing and variable speed trigger allowing the operator to control the speed of the unit by adjusting the force applied to the switch. Replaceable wool ingestion shields prevent wool from being sucked into the unit and blocking the tool. An additional safety feature is a no volt release switch which will prevent the unit from starting when plugged in, even if the switch is in the on position. Standard Equipment includes: 180mm hook and Loop backing pad, 180mm hook and Loop wool bonnet, bail side handle, and a horizontal side handle. Specification Input Power: 1,250WOscillating Speed: 0-600/3,500/min.Pad Diameter: 150 & 180mmSpindle Thread: 14mmWeight: 3kg
The DEWALT DCW682 XR Brushless Biscuit Jointer has a brushless motor that provides powerful and consistent cutting performance. Its paddle switch design accommodates left and right handed users. The Biscuit Jointer achieves accurate results, thanks to the dual rack and pinion fence design, as well as tool-free depth, height, and bevel adjustments. Its integral fence allows users to quickly and easily adjust the bevel capacity from 0 -90 degree. For added safety there is an electric brake that quickly stops the blade after the trigger is released. Retractable anti-slip pins hold the material in place, further increasing safety. Compatible with DEWALT's AirLock system or a standard 35mm dust extractor to minimise dust during cutting (system and extractor sold separately). Bare Unit, NO battery or charger supplied. Supplied with: 1 x Dust Bag, 1 x Spanner, 1 x 35mm Dust Extraction Spout and 1 x TSTAK Case. Specification: No Load Speed: 10,000/min.Max. Cutter Depth: 0-20mmFence Adjustment: 0-90 degreeMax. Cutting Capacity: 100mmWeight: 2.5kg
The SCANGRIP TOWER 5 CONNECT has two 360 degree flexible and turnable floodlights, the lights can be positioned in many different positions to obtain the desired lighting angle, providing perfect lighting condition for painting and installation work. It is extendable up to 2 meters and features two level light output (50-100%) which makes it possible to adjust the light according to the work task. Slim and lightweight design with a QUICK-FOLD system, makes it fast to set up in only a few seconds and fold again when the job is done. In folded position, it is compact and designed for one-hand transport with the integrated carrying handle. Comes as a Bare Unit. Can be powered by:-METABO/CAS Batteries 12V 4.0Ah - 18V 5.2Ah-CONNECT POWER SUPPLY-A 18V battery from a leading power tool brand, such as Milwaukee, DeWalt, Makita, etc., by using the SCANGRIP CONNECT CONNECTOR. Specifications: Luminous Flux, Max./Min.: 5,000/2,500 Lumens.Illuminance, Max.Min. (@0,5m): 8,000/4,000 Lux.Illuminance Distance: 0.20m.Beam Angle: 110 degree.Dimensions: 121 x 153 x 892mm.Weight: 5.2kg.
The DEWALT DCD996 XR Brushless Combi Drill has a tough three speed all metal transmission for increased run time and longer tool life. It features an improved automatic high speed for increasing the users masonry drilling speed. The electronic clutch has an 11 position adjustable torque control for optimised precision when screwdriving. The hammer drill driver has a 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes, and an efficient intelligent trigger allowing total control over all applications. With an improved 3 position LED torch with high/medium/low settings. The high output provides a 20 minute LED delay for lighting dark work spaces. The grip design provides greater application control and maximum comfort. DCD996P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCD996P2B: 2 x 18 Volt 5.0Ah Bluetooth Li-Ion Batteries.DCD996X1: 1 x 18/54 Volt 9.0/3.0Ah FlexVolt Li-Ion Battery. Specification Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kgThe DEWALT DCD996P2 XR Brushless Combi Drill is supplied with the following: 2 x 18 Volt 5.0Ah Li-Ion Batteries.1 x Multi-Voltage XR Charger.1 x Belt Hook.1 x Magnetic Bit Holder.1 x Multi Position Side Handle.1 x TSTAK Heavy-Duty Kit Box.
The DEWALT DWS780 is a 305mm Compound Slide Mitre Saw offering outstanding cutting performance in both small profiles and large construction timbers. XPS shadow line cut indicator which provides a fast accurate alignment of the blade while illuminating the workpiece for increased productivity no adjustment required. Heavy-duty durability with the ability to fully adjust the machine to maintain accuracy over the life of the tool. Quick release bevel stop setting provides accurate and simple setting of bevel angles up to 49° left and right. Cam action mitre lock function makes mitre setting faster and easier allowing the user to quickly angles between 0° - 50° left and 0° - 60° right. Supplied with: 1 x 305mm 60 Tooth Blade, 1 x Blade Spanner, 1 x Dust Bag and 1 x Material Clamp. Specification Input Power: 1,675WNo Load Speed: 1,900 - 3,800/min.Blade: 305 x 30mm BoreCapacity (mm): 90°/90°: 303x110, 90°/45°: 211x112, 45°/90°: 268x63, 45°/45°: 212x76Mitre Capacity (Right/Left): 60°/50°Bevel Capacity: 49°/49°Weight: 24.8kgDEWALT DWS780 305mm Sliding Compound Mitre Saw 1675W 240V Version.
The Einhell GC-DP 7835 Dirty Water Pump offers high delivery rates and smooth operation when used to pump off dirty water from the house, garden, ponds and wells. Achieves a delivery rate of up to 15,700 litres of dirty water per hour. Fitted with an infinitely variable float switch, that lets you choose between continuous operation and a pre-selected ON and OFF switching level. The pump housing is made of impact-resistant plastic that is able to withstand high stress. For flexibility this dirty water pump comes with a universal connection and a 90° bracket. It has a carry-handle for user-friendly transportation and an integrated cable rewind for neat and safe storage. Specification: Input Power: 780WMax. Delivery Capacity: 15,700 l/h.Max. Delivery Height: 8mImmersion Depth: 7mMax. Particle Size: 35mmHose Connection: G11/2 (ca. 47.8mm) Female ThreadMax. Water Temp: 35°CPower Cord: 10mWeight: 5.2kg
The Metabo ASR 25L SC Wet & Dry Vacuum is suitable for liquids and dry solids with commercial registration. Ideal for mobile use due to low weight and compact construction. Automatic shut-down when vacuuming liquids once the maximum filling height is reached. Certified in accordance with EU standard for dusts of dust class L. Also features an auto take-off enabling the use of a power tool in conjunction with the vacuum. Fitted with two polyester filter cassettes that have a large filter area for constantly high suction capacity. Its automatic trailing mechanism makes sure the suction hose is completely empty. Antistatic basic equipment prevents static charge when using appropriate accessories. SelfClean function for semi-automatic filter cleaning during breaks for next use. Supplied with: 1 x Suction Hose 35mm x 3.2m, 1 x Handle Adaptor, 2 x Plastic Suction Pipes, 2 x Polyester Filter Cassettes (M Class), 1 x Nylon Web Filter Bag, 1 x Grouting Nozzle, 1 x Universal Nozzle. Specification Input Power: 1,400 Watt.Capacity: Wet/Dry: 25 Litres.Max Air Flow: 3,660 l/min.Vacuum: 248 m/bar.Suction Hose Diameter: 35mm.Weight: 11kg.The Metabo ASR 25L SC Wet & Dry Vacuum Cleaner 240 Volt Version.
The DEWALT DCV586M XR FlexVolt Dust Extractor is M-Class compliant, <0.1% dust escape through filter, making it suitable for use on construction sites. Fitted with a brushless motor that provides powerful and constant suction power, even with the finest concrete and wood dust. Innovative dual filter cleaning system maintains performance during tough construction applications. The filter is automatically cleaned every 30 seconds, reducing filter clogging and delivering constant air flow. An audible alarm alerts user if a drop in performance occurs. The extractor features a key fob remote which enables wireless activation of the unit away from the switch for ease of use, saving time and effort. The TSTAK™ compatibility enables ease of use, enhanced mobility and flexible storage. Wet and dry capacity for maximum clean up flexibility. DCV586MT2: 2 x 18/54V 6.0/2.0Ah Li-ion BatteriesDCV586MN: Bare Unit, No Battery or Charger Specification: Voltage: 18/54VCapacity Wet/Dry: 7.5/11 LitreMax. Air Flow: 24.7L/sec.Hose Nozzle Outside Diameter: 32mmThe DEWALT DCV586MN XR FlexVolt Dust Extractor is supplied with: 1 x Extraction Hose 2.4m x 32mm1 x AirLock Adaptor 3mm1 x Stepped Rubber AirLock Adaptor 1 x Key Fob1 x Strap1 x Fleece Dust Bag No Battery or Charger Supplied.
DEWALT DCF403 XR 3/16in Riveter with a tool-free nose piece and powerful brushless motor delivering longer run times, less maintenance and better power control. Its 25mm stroke length allows for fastening rivets in one stroke. Suitable for installing aluminium, steel and stainless steel blind rivets up to 4.8mm. The on-board mandrel collector store spent mandrels. Fitted with an ergonomic comfort grip handle for increased balance and tool control. There is also a bright integrated LED work light that enhances the work area in low light areas. Supplied with: 1 x 18V 1.7Ah POWERSTACK™ Li-ion Battery.1 x Charger.1 x TSTAK™ Kitbox. Specifications: Rivet Diameter: 4.8mm.Stroke Length: 25mm.Max. Force: 10kN.
The DEWALT DCB094K USB Power Delivery Charging Kit charges all DEWALT 18V XR and FlexVolt batteries. It has a USB-C port and output power to charge your other personal devices up to 100W. There is also a USB-A port that acts as an adaptor, allowing you to charge devices up to 12W using traditional USB cords. Fitted with a belt hook for on-the-go stowing. Supplied with: 1 x 100W USB Cord and 1 x 65W Plug.
The Panasonic EYC242LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball DetentNo Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpmMax. Torque: 280NmTensile Bolt Capacity: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.DEWALT DCN660N XR Brushless Second Fix Nailer 18 Volt Bare Unit, No Battery or Charger Supplied.
The DEWALT D25133K SDS 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. It also features an impact-stop mode for drilling in wood, steel, ceramic and screwdriving applications. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It features electronic variable speed for total control in any application. The ergonomic rubber coated back handle and industrial design provides easy and comfortable handling in any application. Suitable for the following applications:Drilling holes in solid masonry, concrete and stone from 4 to 26mm in diameter to various fixing.Drilling through holes in masonry to house pipes and cables.Light chipping in brick or masonryTile removal from kitchens and bathrooms.Small channelling in brick.Mortar and plaster removal.Some drilling in wood and steel. Supplied with:1 x Multi-position rubber side handle1 x Depth stop1 x Heavy-duty carrying case. Specifications:Mode: Rotary, SDS Hammer, Chisel Only.Input Power: 800 Watt. No Load Speed: 0-1,500/min. Impact Rate: 0-5,550/bpm, 2.6 Joules.Capacity: Wood: 30mm, Steel: 13mm, Concrete 26mm, Core: 50mm.Toolholder: SDS-Plus.Weight: 2.3kg.DEWALT D25133K SDS Plus 3 Mode 26mm Hammer Drill 800 Watt 240 Volt Version.
Bosch GBH 5-40 D SDS-Max Professional Rotary Hammer features robust metal components and an optimised lubrication system for increased durability. Its lightweight and compact design makes it ideal for work in hard-to-reach places. The strong motor enables the delivery of 8.5 J of impact energy for a fast drilling progress and high material removal rate. This tool is intended for drilling up to 40mm in diameter as well as light chiselling work in concrete and stone. It is compatible with various dust attachments. The GBH 5-40 D Professional also features a Rotation Control Clutch and Speed Selection. Supplied with: 1 x Auxiliary Handle, 1 x Grease Tube, 1 x Machine Cloth and 1 x Carrying Case. Specifications: Tool Holder: SDS-Max.Input Power: 1,100W.Impact Rate: 1,500-2,900/bpm.Impact Energy: 8.5 Joules.Drilling Diameter: Concrete, Hammer Drill Bits 12-40mm, Opt. Appl. Range Concrete, Hammer Drill Bits 18-32mm, Concrete, Breakthrough Drill Bits45-55mm, Concrete with Core Cutters40-90mm.Weight: 6.8kg.
The Makita DHS660 LXT Brushless Circular Saw with Automatic Torque Drive Technology, that automatically changes the cutting speed according to load condition for optimum operation. There is also an ADT indication lamp: High torque = green light on, High speed = lights out, Overload alert = blinks green. Compact, lightweight design with a durable aluminium base that has easy-to-read scale markings for easier adjustments. The design also provides improved visibility of blade tip and a blower function helps keep sawdust off the cut line. For safe operation, there is an electric brake, soft start and lock-off button. Other features include an LED job light and a rear-facing exhaust port. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 5,000/min.Max. Cutting Depth: @0º: 57mm, @45º: 41mm, @50º: 37mmBlade: 165 x 20mm BoreWeight: 2.9kg
The DEWALT DCW220NT XR 18V Belt Sander has a brushless motor for extended durability, efficiency and power. It also has a high no load speed, which is variable to provide ultimate speed and application control.The sander features a direct AIRLOCK dust port and wireless tool control to ensure a cleaner and safer jobsite. WTC™ allows for remote switching on of the dust extractor when the sander is started (requires compatible DEWALT dust extractor). A quick-release belt change system allows sanding belts to be changed effortlessly. Class leading DEWALT ergonomics ensure maximised comfort and safety. Supplied in a T-STAK VI Kit Box. Includes:Dust Bag.Rotating Dust Port.Sanding Belt, 80 Grit. Bare Unit, No Battery or Charger supplied. Specifications: Belt Speed: 320m/min.Belt Size: 75 x 533mm.Weight: 3.0kg.
The DEWALT D26414 digital LCD durable Heat Gun are suitable for professional applications with excellent temperature control and memory setting for consistent temperature requirements. It has optimised cooling and is compact and lightweight for easy handling and use. It is suitable for the following applications: - Stripping old paint.- Drying new coats of paint filler.- Varnish applications.- Re-melting adhesives/removing stickers.- Soft soldering pipes.- Moulding and welding plastics.- Applying tin-plate coatings and similar jobs.- Shrinking cable ends, foil and sleeves.- Welding applications, lighting barbecues.- Thawing frozen water pipes, ski waxing etc. Supplied with: Cone Nozzle and Fish Tail Surface Nozzle. Specification Input Power: 1,600W.Airflow: 650 L/minAir Temperature: 50-600°C.Weight: 0.85kg.DEWALT D26414 LCD Premium Heat Gun 2000W 240V Version.
The DEWALT DCS335 XR Brushless Body Grip Jigsaw has a 4-position pendulum action, allowing the user to control the aggressiveness or smoothness of the cut. Tool-free bevel adjustment and clamp lock for fast and secure adjustment. It has the same cutting capabilities as top handled jigsaws but is better for cutting in tight or confined spaces and cutting at unconventional angles. Ideal for professional carpenters, joiners and woodworkers. Bare Unit, No Battery or Charger Supplied. Specification: Strokes No Load: 1,000-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Aluminium 57mm
The Bosch GWS 9-115 S Angle Grinder is fitted with a powerful motor and variable speed selection for increased control when working on different materials. With overload capacity for increased safety. The small grip diameter and ergonomic design make it comfortable and easy to handle. Specifications: Input Power: 900W.No Load Speed: 2,800-11,000/min.Disc Diameter: 115mm.Spindle Thread: M14.Weight: 1.9kg.
The Bosch GIC 12V-5-27 C Professional Inspection Camera has a large 5in display with a high-definition resolution of 1280 x 720 pixels for an in-depth view when investigating pipes, ducts, or other hard-to-reach areas. No matter which direction the camera head is facing, there's no need to reinterpret the image direction during use because of the AutoUp function. This enables optimal spatial orientation by automatically turning the image the right way up. The robust camera is designed to endure dust and water on tough job sites. It comes with an IP67 rating for the camera head, protecting it from dust and short periods of immersion in water, and IP54 dust and splash water protection for the tool. With the GIC 12V-5-27 C Professional, photos and video footage are easily transferred via USB-C cable or Micro-SD card. The inspection camera is perfectly suited for many tradespeople applications such as, for example, inspecting the interior of distribution boxes, pipes, and wall cavities as well as for hydraulic systems and applications in the automotive sector. Max. 30 min immersion for camera cable in: diesel, petrol, engine oil, AdBlue, ethyl alcohol, salt water (26.5% salt content). Can be powered by a 12V Li-ion battery or with 4 x AA Batteries (adaptor required). Specifications: Display Size: 5in.Display Resolution: 1280 x 720 px.Diameter of Camera Head: 8.3mm.Length of Camera Cable: 150cm.Field of View (FOV): 75 degree.Focus Distance: 30 - 80mm.Photo Resolution: 1280 x 720.Video Resolution: 1280 x 720.Data Transfer: USB-C, Micro-SD Card.Dust and Splash Protection: Camera Cable IP67, Tool IP54.Weight: 0.7kg.
The Bosch GKF 18V-8 Professional Cordless Palm Router features a powerful brushless motor. This palm router has the most compact height on the market to minimise top-heaviness and maximise tool control, hands-free spindle lock for hassle-free bit changes, and a fine cutting depth adjustment placing a superior routing experience in the palm of your hand. Purpose-built surface and edge routing vacuum adaptors provide highly efficient dust collection in all situations. Compatible with a wide range of accessories to satisfy all aspects of palm routing, from light edge profiling to more demanding surface routing tasks.Comes as a Bare Unit, NO Battery or Charger.Supplied with: 1 x Parallel Guide, 1 x Collet with Nut 1/4in, 1 x Surface Routing Dust Extraction Adaptor, 1 x Edge Routing Dust Extraction Adaptor, 1 x Chip Shield 1 x Wrench 17mm.Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance.Specifications:Collet: 6mm, 1/4in, 8mmNo Load Speed: 10,000 – 30,000/min.Weight: 1.1kg excl. battery
Bosch GKF 12V-8 Professional Palm Routerfeatures a unique design for perfect control. Its innovative shape, low weight, and ideal balance point are optimized for comfortable, ergonomic handling. The edge router’s compact body is due to its brushless motor and a 12V system. It is cordless for maximum manoeuvrability, convenience, and freedom when routing. It also features fast macro depth adjustment, fine adjustment, a securable cutting depth, and a Spindle Lock. Ideal for edge routing in wood and plastic. Comes as a Bare Unit, NO battery or charger. Compatible with all Bosch Professional 12V batteries and chargers (Professional 12V System). Specifications: Collet: 1/4in.No Load Speed: 13,000/min.Weight: 1.1kg excl. battery.
This Bosch GW S9-115 P Professional Grinder comes with a paddle switch for increased user safety. Power to the machine instantly cuts off when the switch is released. Fitted with a highly efficient 900W motor, this provides a superior cutting and grinding experience. Its robust design and components provide a long lifetime, even under tough working conditions, and heavy workloads. The ergonomic paddle-shape design and slim grip size provide best in-hand control. Specifications: Input Power: 900W.No Load Speed: 11,000/min.Disc Diameter: 115mm.Grinding Spindle Thread: M14.Weight: 1.9kg.
The Evolution R230RCP Multi-Material Reciprocating Saw has been designed to cut a wide range of materials from green wood to metal. Comes fitted with an ergonomic, soft grip, 180û rotating handle for maximum control and versatility without having to adjust the blade. Fully tool-less blade changes and adjustments for quick and easy use. The LED light improves visibility and precision for accurate work in low-light conditions, whilst the 3m cable length gives freedom within the workspace. Supplied with 4 single-purpose blades for the dedicated cutting of thin steel, green wood and general wood, along with a multi-material blade to increase productivity, allowing you to cut through a range of materials including plastic, copper, wood and metal. Specification: Input Power: 850WNo Load Speed: 0-2,400/min.Stroke Length: 28mmRear Handle Rotation: 180°Weight: 3.2kg
The Metabo MFE40 FE Wall Chaser is ideal for electric installations, to lay cables and empty pipes under plaster with cutting depths up to 40mm. Fitted with a powerful Marathon motor for increased performance and patented dust protection for long service life. Tacho-Constamatic (TC)-Full Wave Electronics provide fast work progress by means of constant speed under load. With electronic soft start and restart protection for safe working. LED signal informs about overload or active restart protection. The Metabo S-automatic safety clutch provides mechanical decoupling of the drive for safe working should the disc stop unexpectedly. Fitted with a robust aluminium die-cast hood and optimal handle position for comfortable guiding of the machine. Pushing cut for optimal view of the marking line. The channel width and cutting depth can be set . Specification: Input Power: 240V 1,900W, 110V 1,700WNo Load Speed: 5,000/min.Cutting Depth: 10-40mmGroove Widths: 9, 15.5, 22, 28.5, 35mmTorque: 6NmDisc Diameter: 125mmWeight: 4.6kgThis Metabo MFE40 FE 125mm Wall Chaser 1900W 240V is supplied with: 2 x Diamond Cutting Discs1 x Set of Spacer Rings1 x Flange Nut1 x Face Pin Wrench1 x Chase Chisel1 x Plastic Carry Case
The Makita DHS680 Brushless Circular Saw boasts high-power cutting with automatic speed control, which changes according to load condition. In light-duty mode: high-speed rotation mode, in heavy-duty mode: high torque mode. It has a compact and lightweight design that has been achieved thanks to a downsized motor, better placement of parts and using durable but light magnesium die-cast for the base, blade case and safety cover. Comes as a Bare Unit, NO Battery or Charger supplied. Specification: No Load Speed: 5,000/min.Cutting Depth: @0º 57mm, @45º 41mm, @50º 37mmBlade: 165 x 20mm boreWeight: 3.3kg
The Einhell TE-MS 18/210 Li Solo Mitre Saw is a member of the Power X-Change family, it is a versatile tool for use in the work shed, garage and hobby room. Quickly adjustable settings make it possible to perform work on materials such as wood, panels, all sorts of plastic, or parquet flooring with almost effortless ease. The turntable has an exact angle adjustment facility for angular cuts. The saw head can be tilted to the left for exact mitre cuts. X-Tend workpiece supports enable the settings to be adjusted with just one hand and without the need for any tools. For repeat cutting there is an integrated limit stop. The high-quality carbide-tipped precision saw blade was developed specially for cordless saws. The sawdust bag or the chip extraction system (extractor connection Ø36mm) help keep the workplace clean and tidy and prevent the accumulation of dust in the air. The compact and low-weight design along with the carry handle make it easy to transport. Other features include: an integrated clamp, cutting line laser and an LED work light. Bare Unit, No Battery or Charger Supplied. Recommendation for best results: 2.6Ah Plus battery or higher. Specification: No Load Speed: 3,000/minBlade: 210 x 30mm BoreMitre Cut: 45° - 0°Swivelling Range: 47° - 47°Cutting Capacity: 90° x 90°: 120 x 60mm, 90° x 45°: 83 x 60mm, 45° x 90°: 120 x 34mm, 45° x 45°: 80 x 34mmSuction Adaptor: Ø36mmWeight: 7kg
The DEWALT DCN680 Brushless XR 18 Gauge Brad Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use but durable enough for the work site environment. Mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Fitted with a brushless motor that offers increased runtime and durability. Trigger and contact trip lock-off prevent accidental discharge of fastener. With tool free stall/jam clearance to minimise down time. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. Two modes of operation: Sequential mode allows for precision placement, Bump operating mode provides the user with production speed of up to 4 nails per second. DCN680D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN680N: Bare Unit, No Battery or Charger. Specification Magazine Capacity: 110.Fires: Nails: Length: 15-54mm. Diameter: 1.25mm.Nailer Operating Mode: Bump & Sequential.Magazine Angle: 0°.Weight: 2.4kg.The DEWALT DCN680N Brushless XR 18 Gauge Brad Nailer is supplied as a Bare Unit, NO battery or charger.
