The Makita DGD800 LXT Die Grinder has been designed to cover a range of metalworking surface-prep applications including grinding, smoothing and cutting. It has a long nose and an easy to grip motor housing with a small circumference. A round collet nut reduces the risk of damages and scratches to the workpiece. With slide switch operation for ease of use, it also has a lock-on feature to reduce fatigue. The body features vent slots that have been designed to direct exhaust air away from the user. Fitted with a rubber cover that provides heat insulation and non-slip surface for a sure grip. Comes as a Bare Unit, No Battery or Charger. Specification: Collet Capacity: 6mmNo Load Speed: 25,000/min.Weight: 1.7kg
The Makita CLX224AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V DF333D 12Vmax CXT Drill Driver with 2 mechanical gears and a variable speed control trigger. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Chuck: 0.8-10mm KeylessNo Load Speed: 0-450/0-1,700/min.Max. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 1 MAKPAC Connector Case.
The Einhell TP-VC 36/30 S Auto PRO Wet/Dry Vacuum Cleaner is a reliable, cordless helper for home, workshop and garden. With ECO or boost mode, you can extend battery life or vacuum with maximum power respectively. The sturdy, stainless steel container holds up to 30 litres. Dirty water can easily be drained via the handy water drain plug. The blow-out connection is used for blowing out hard-to-reach places, e. g. corners or spaces behind radiators. Large wheels and rollers make for mobility and easy transport. The wet/dry vacuum cleaner can be connected to various Einhell devices for extraction. With its connectivity function, dust extraction is carried out without a cable connection. Via the transmitter mounted on the suction hose detecting the vibrations of the connected device, the vacuum cleaner starts and stops automatically when the cordless tool is started/stopped. A practical accessory holder ensures nozzles and accessories are kept in order and within reach. Delivery includes a stainless steel telescopic tube (Ø 36mm) with a air regulator and a 2.5 metre-long, heavy-duty plastic suction hose (Ø 36mm). Delivery also includes a large combination, joint and upholstery nozzle, a foam filter, pleated filter, paper dirt trap bag as well as the transmitter unit for the connectivity, fixing tape and charging cable. No Battery or Charger supplied.Powered by 2 x 18V Power X-Change batteries (NOT supplied). Part of the Power X-Change family. Powered by Lithium-ion rechargeable batteries with a battery management system for a long life.Specifications:Max. Suction Power: 150 mbarVessel Capacity: 30 litreSuction Hose Length: 2.5mSuction Hose Diameter 36mmWeight: 8.15kg
The Einhell TP-ET 18 Li BL - Solo Palm Router has a powerful motor with variable speed control electronics, so it adapts perfectly to the task. Continuous milling depth adjustment and high quality aluminum construction ensure precise work. The edge router base also enables chamfering of edges. Fitted with an ergonomic, soft grip for added comfort. A plastic base plate insert protects the work surface. There is also a spindle lock for easy tool change and an LED for optimum illumination of the work area. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This router comes as a Bare Unit, NO battery or charger. Supplied with: 1 x Parallel Stop, 1 x Compass Tip, 1 x Guiding Role, 1 x Copy Sleeve, 2 x Spanners and 1 x Extractor Adaptor. Specifications: Collet: 6mm & 8mm.No Load Speed: 10,000 – 30,000/min.Lift Height: 40mm.Max. Milling Cutter: 30mm.Weight: 1.34kg.
The Makita DGA463 Brushless LXT Grinder is fitted with an on/off slide switch and lock-on function for ease of use. The brushless motor provides increased efficiency. It has a variable speed control dial with built-in Automatic Torque Drive Technology: automatically changes the cutting speed according to load condition for optimum operation. This grinder features a number of safety features: anti-restart function, electric brake, soft start, electronic current limiter for overload protection and Active Feedback Sensing Technology (AFT): shuts down the tool to protect the user if the rotation speed suddenly slows down. The body features an ergonomic soft grip for reduced fatigue during prolonged use. There is also a handy battery fuel gauge and removable dust covers. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,000-8,500/min.Max. Wheel Diameter: 115mmBore Diameter: 22.23mmMax. Wheel Thickness: 7.2mmWeight: 2.3kg
The Makita DC18RC 7.2-18V Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, keeping the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. With 3 active charging colours to help identify when the battery is charged, and to what level. When it is used in conjunction with the charging adaptor ADP0, this charger offers also the possibility of charging NiMH slide on batteries of 9.6-24V batteries. Or when used with charging adaptor ADP04, this charger offers the possibility to charge NiCad and NiMH rod and block batteries of 7.2-18V batteries. The DC18RC is compatible with the following battery models: BL1830, BL1430, BL3626, BL3622, BL1415, BL1013, and BL0710.
The Bosch GSB 13 RE Impact Drill is fitted with a robust, twin-sleeve keyless 13mm chuck made of metal for fast tool changes. It is extremely handy, no bigger than a glove and light weight at 1.6kg. It has a softgrip handle for a secure, comfortable hold. Fitted with electronic control for exact pilot drilling, speed preselection with setting wheel, and forward/reverse rotation. Specifications: Input Power: 240V 550W, 110V: 600W.No Load Speed: 0-2,800/min.Impact Rate: 0-44,800/bpm.Torque: 10.8Nm.Chuck: 13mm.Capacity: Concrete: 13mm, Wood: 25mm, Steel: 10mm, Masonry: 15mm.Weight: 1.5kg.Bosch GSB 13 RE 13mm Keyless Chuck Impact Drill 550 Watt 240 Volt Version.
The Black Decker BEW230 Mouse Sander has a detailed base which is designed to give better results when sanding intricate areas. The tear drop shape of the base allows you to access tight corners. The Mouse Sander uses Quick fit sanding paper for faster sanding action and easier paper fitment. The compact design gets you closer to the work surface giving you greater control. Fitted with rubber grips for comfort and a rocker switch for continual operation. Ideal for removing paint, varnish, cleaning glass, rust and sanding in tight spaces. Supplied with: 6 x Sanding Sheets. Specifications: Input Power: 55W.Oscillating Speed: 11,000/min.Orbit Diameter: 1.5mm.Platen Size: 105mm².Platen Shape: Mouse.Eccentricity: 0.75mmCable Length: 2m.Sound pressure (LpA): 65 dB(A).Weight: 0.8kg.
The Einhell TP-JS 18/135 Li BL-Solo Power X-Change Jigsaw is the perfect tool for ambitious DIYers who need the perfect cut in a whole host of different materials. Powered by the Einhell PurePOWER brushless motor. This brushless motor offers more power and a longer running time than conventional carbon brush motors. After registering online, the brushless motor comes with a 10-year warranty. The integrated soft start ensures high safety and protects the motor, and the stable aluminium base plate dampens the vibrations of the saw. It also features a convenient cutting line indicator and an LED light for illuminating the cutting area. Thanks to speed electronics, it is possible to work perfectly matched to the material and application. The tool-free blade holder cuts down on unnecessary movements and allows quick and easy blade replacement. The integrated plastic glide insert protects particularly delicate workpieces, while the anti-splinter guard ensures tear-free cuts. Optimum visibility while working is ensured by the dust blower function or, alternatively, the included extraction adapter, which allows a wet/dry vacuum cleaner to be connected. Member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger supplied. Includes one jigsaw blade for wood. Specifications: Strokes at No Load: 0-3,500/min.Stroke Length: 26mm.Bevel Capacity: 45 degree.Capacity: Steel 10mm, Wood 135mm, Plastic 20mm.Weight: 2.19kg.
The Einhell TE-OS 18/230 Li Solo Power X-Change Orbital Sander is perfectly suited for sanding flat surfaces such as workpieces, wooden planks or panelling and cladding. The speed can adapted to the material and application by the speed electronics. It has a durable aluminium base plate with both micro hook loop fastening and a clamping device, so the abrasive can be changed quickly. The grip surfaces are equipped with softgrip for a firm and secure grip. The dust collection sack collects any sanding dust produced. There is also the option to connect a vacuum cleaner for maximum cleanliness on the work surface. Delivery includes three sandpapers, so you can start your project immediately. Member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Oscillating Speed 14,000-22,000/min.Oscillating Circuit: 2.5mm.Sanding Area: 230 x 115mm.Sandpaper Size: Clamp 280 x 115mm, Hook Loop 230 x 115mm.Weight: 1.54kg.
The Rapid R2200-LCD Hot Air Gun has an LCD screen that allows for accurate temperature setting in increments of 10 degreeC, from 50 degreeC up to 650 degreeC. This level of precision allows for effective use for the most demanding tasks on a wide variety of materials while reducing the risk of damage. Reaches the desired operating temperature quickly, optimising working efficiency. Overheating protection and a residual heat indicator enable safe handling after use, whilst LED lights guide to airflow and temperature settings. A highly stable base for desk or workbench operation and ergonomic, soft grip handles make the gun easy and comfortable to use. Supplied in a handy protective storage and transport case which includes a Quick Start Guide that helps you use the tool correctly. Specification: Input Power: 2,200WTemperature Settings: 50-650 degreeCAirflow: 250-500 L/min.
The Makita DPO600 Brushless Random Orbit Polisher has 2-modes of operation: Normal Mode: orbital action with forced rotation of the pad for rough polishing such as surface treatment; Finishing Mode: orbital action with free rotation of the pad for fine polishing. Whilst the soft start feature provides increased safety and control. There is also a lock-on function and ergonomic soft grip for reduced fatigue during long periods of operation. The tool can be rested upside down without damaging the workpiece, thanks to elastomer bumpers. Comes as a Bare Unit, No Battery or Charger. Specification: Oscillating Speed (Normal/Finishing Mode): 0-6,800/0-5,200/min.Strokes Per Minute (Normal/Finishing Mode): 0-13,600/0-10,400/spmOrbit Diameter: 5.5mmMax. Polishing Pad Diameter: 150mmWeight: 3.1kg
Range of Flex Power Tools replacement filtres and bags. Suitable for the VCE35L Vacuum.The Flex Power Tools Fleece Filter Bags are for use with VCE 35 L AC dust extractor and have double the volume capacity with significantly better suction compared to paper filter bags. The 4-layered VacuFleece material offers tear resistant protection against damage from sharp objects. Resistant to unintentional wet vacuuming or damp material. Supplied as a pack of 5.
Makita DSC102 LXT Threaded Rod Cutter provides for spark-free and neat cutting of steel rods. Generates burr-free cuts allow for easy nut tightening. Fitted with a brushless motor maintenance-free and provides long motor life. A battery protection system automatically shuts off power when the battery level is low. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Cutting Capacity: Mild Steel (up to 400N/mm²): M6 - M10 mm.Stainless Steel (up to 600N/mm²): M6 - M8 mm.
The Makita DHR242RTJW SDS Plus Brushless Hammer Drill is supplied with: 1 x DX06 Dust Extraction System2 x 18V 5.0Ah Li-ion Batteries1 x DC18RC Compact Charger1 x MAKPAC Type 4 Carry Case1 x Side Handle1 x Depth Stop
The Kärcher WD 2 Plus Wet & Dry Vacuum stands up to the most stubborn dirt around your car, garage and garden, effortlessly switching between wet and dry pick-up for everything from dust to heavy rubble. Its mighty 1000W motor delivers extreme suction power. The machine's compact size saves space in the garage, while onboard storage for all parts keeps everything you need conveniently to hand as you work. Supplied with: 1 x Suction Hose 1.8m2 x Suction Tubes1 x Wet & Dry Floor Tool1 x Cartridge Filter Specification: Suction Power: 1000WCapacity Wet/Dry: 12 litresPower Cable: 4mWeight: 4.2kg (machine), 5.3kg (with accessories)
The Flex Power Tools RD 10.8/18.0/230 Cordless Radio has a robust construction and can be powered by mains or by Flex 10.8-18V Li-ion batteries. It is capable of receiving DAB& and FM stations. With automatic station search and 5 memory spaces. Integrated Bluetooth technology means you can connect your favourite device, ideal for streaming music. It also features an AUX input and a USB port/charger so you can connect/charge smartphones, tablets etc. Supplied as a Bare Unit - No Battery or Charger. Specification: Input Power: Battery Voltage 10.8/18V; Mains Voltage/Frequency Hz 230V/50&60 HzDAB& Frequency: 174.928-239.200 MHzFM Frequency: 87.5-108 MHzLoudspeaker Output: 2 x 10WConnection Thread: 5/8inInternational Protection: IP64Size (W x L x H): 369 x 212 x 201mmWeight: 4.3kg (without battery)
The Kew Nilfisk Alto Buddy II 12 Litre Wet & Dry Vacuum is the most compact, lightweight yet powerful vacuum in the Buddy ll range of wet and dry vacuum cleaners. The powerful motor makes it the perfect choice for picking up wet or dry debris in the home, car, workshop or garage. Its washable PET wet filter protects the turbine for a long life. The Buddy II has a useful blow function that provides another option for cleaning. Its two big wheels at the back and two rotation wheels in front make the machine very stable and easy to move around. A built in accessory holder provides storage for accessories so they are always at hand. Specification Input Power: 1,200 Watt.Capacity Wet/Dry: 12 Litres.Air Flow: 3,600 l/min.Vacuum: 200 mbar.Weight: 4.4kg.
The Bosch GBH 5-40 DCE Professional SDS Max Combi Hammer is a fast all-rounder with a powerful impact mechanism and Vibration Control to ensure a more comfortable work, even in time-intensive applications. The patented setting wheel allows for variable adjustment of the speed and impact rate for optimum performance. Also fitted with a patented, lockable switch for low-fatigue chiselling work, Constant Electronic, service display and standby display for maximum convenience, a ball grommet for high movement radius and preventing cable breaks. Supplied with: 1 x Auxiliary Handle, 1 x Carry Case, 1 x Grease Tube and 1 x Machine Cloth. Specifications: Input Power: 1,150W.No Load Speed: 165-330/min.Impact Rate: 1,500-2980/bpm.Impact Energy: 8.8 Joules.Drilling Diameter: Concrete: Hammer Bits: 12-40mm, Breakthrough Bits: 45-55mm, Core Cutters: 40-90mm.Optimum Range: Concrete: Hammer Bits: 18-32mm.Sound Pressure Level: 93 dB(A).Weight: 6.8kg.Bosch GBH 5-40 DCE Professional SDS Max Combi Hammer 110V Version.
Replacement Filtres & Bags for the T31A Wet & Dry Vacuum.Trend HEPA Cartridge Filter which is suitable for the T31A Wet & Dry Vacuum. Filter Efficiency: 0.3 micron.
The Metabo TKHS 315 M Site Saw is a precise, powerful table saw in professional configuration that quickly adapts to every application. It is fitted with a quiet induction motor that has a maintenance-free, robust design with a motor brake and overload protection. It also has restart protection that prevents unintentional start-up after power supply interruption, for complete ease of mind. There is a sturdy parallel guide/ripping fence with quick fastening combined with a mitre fence that has a linear stop, so it can also be used a sliding table. The saw blade height is freely adjustable and the saw blade inclination can be adjusted from the front. It has a sturdy, powder-coated sheet steel design with a galvanised table-top and foldable table length extension. The frame and motor are supplied pre-mounted. Ideal for sawing squared timber, boards, panels and wood-like materials in the workshop and at construction sites. Supplied with: 1 x 300mm 24 Tooth Carbide Saw Blade, 1 x Mitre Fence, 1 x 600 x 800mm Table Extension, 1 x Chip & Dust Extraction Unit, 1 x Push Stick, 1 x Wheel & Handle Set and 1 x Parallel Guide/Rip Fence. Specification Input Power: 2,500WNo Load Speed: 3,000/min.Table Size: 800 x 600mm, Bevel Capacity: 0-45°Cutting Height: 0-85mmCutting Width: Parallel Guide/Rip Fence: 340mm, Mitre Fence: 250mmWeight: 75kgThe Metabo TKHS 315 M Site Saw 240 Volt Version.
The HiKOKI NR1890DCAW9Z Framing Nailer has a brushless motor for longer run time, less maintenance and increased durability. No air hose or compressor required. The air/spring drive system means less recoil, better flush driving and easier maintenance. A selective activation button; easily choose between sequential or bump fire mode.Its high stable driving power allows the nailer to drive nails up to 90mm into lumber with ease. The dry fire lockout system prevents nailer from driving when fasteners are low. A lock switch and 30 minute automatic shutdown for increased safety and longer battery life.Other features include: tool free adjustment of drive depth, low battery indicator and pivoting rafter hook.Specifications:Nail Length: 50-90mmDriving Speed: 1.5-2 nails/sec (intermittent)Loading Capacity: 47 NailsWeight: 4.1kg (exc. battery)
This HiKOKI NR1890DCAW9Z Framing Nailer comes as a Bare Unit, NO battery or charger supplied.
The HiKOKI NR1890DCAW9Z Framing Nailer has a brushless motor for longer run time, less maintenance and increased durability. No air hose or compressor required. The air/spring drive system means less recoil, better flush driving and easier maintenance. A selective activation button; easily choose between sequential or bump fire mode.Its high stable driving power allows the nailer to drive nails up to 90mm into lumber with ease. The dry fire lockout system prevents nailer from driving when fasteners are low. A lock switch and 30 minute automatic shutdown for increased safety and longer battery life.Other features include: tool free adjustment of drive depth, low battery indicator and pivoting rafter hook.Specifications:Nail Length: 50-90mmDriving Speed: 1.5-2 nails/sec (intermittent)Loading Capacity: 47 NailsWeight: 4.1kg (exc. battery)
The HiKOKI NR1890DCAJPZ Framing Nailer is supplied with:2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x Stackable Case
The HiKOKI CC14SF Cut Off Saw has a powerful motor for heavy-duty applications with a sturdy aluminium housing for extended service life. It has externally accessible carbon brushes for easy service and maintenance. One touch vice system allows quick feeding and easy tightening and cutting. The saw is also fitted with a spindle lock, that makes mounting and dismounting wheels more convenient. The soft grip handle provides added user comfort and there is a spark diversion guard for user safety. Supplied with: 1 x Cut Off Wheel and 1 x Wrench. Specification: Input Power: 240V 2,000W, 110V 1640WNo Load Speed: 3,800/min.Mitre Facility Left/Right: 0-45°Capacity: Round Pipe 115mm, Shaped Steel 115 x 130mmWheel: 355 x 25.4mm boreWeight: 16.0kg1 x HiKOKI CC14SF/240 Cut Off Saw 355mm 2000W 240V version.
The DEWALT DCL074 XR Tool Connect™ Area Light with 3 brightness settings, up to a maximum of 5000 lumens. It has a 360° beam pattern; the precision engineered lens with 150 flutes delivers a bright even beam pattern to illuminate entire working space. Fitted with a robust roll cage for increased durability, designed to withstand tough job site environments. With the Tool Connect™ app, users can wirelessly power on and off the unit as well as customise settings such as the light intensity, alerts for low charge and set individual schedules for the day, time and intensity. There is also a tripod mount and hang hook, which allow for versatile positioning. IP54 rated for water and dust protection. Bare Unit, No Battery or Charger Supplied. Specification: Light Output: 1,500/3,200/5,000 lumens
The DEWALT DCG409VS XR FlexVolt Advantage Grinder uses intelligent electronics to sense what battery is in the tool. Both power and torque are increased when using XR FlexVolt batteries. This grinder providing up to 42% more power when used with XR batteries compared to standard 18V packs.An adjustable variable speed dial allows the user to pre-set speeds for more control and correct application. The brushless motor provides increased run time and durability while an electronic soft start allows for a more controlled start-up. This DEWALT product has protective mesh dust guards offering additional protection against motor contamination and increasing tool durability. Its electronic brake and clutch work quickly to keep you safe and the rubber overmoulded rear and side handles increase user comfort and control.Comes as a Bare Unit, NO battery or charger provided. Supplied with: 1 x 2-Position Side Handle, 1 x Keyless Protective Guard, 1 x Hex Key, 1 x Inner Disc Flange, 1 x Outer Disc Flange and 1 x TSTAK Kitbox. Specifications: No Load Speed: 3,000-9,000/min.Max. Disc Diameter: 125mm.Spindle Thread: M14.Weight: 1.8kg (without battery).
The DEWALT DCS577 XR FlexVolt High Torque Circular Saw is part of the XR FlexVolt platform offering unrivalled runtime and performance. Heavy-duty construction applications can be completed without the need for mains power. Its high torque brushless motor delivers up to 5,800rpm of power, perfect for first fix applications. The diamond bore drive system transmits the generated high torque more effectively, delivering superior performance and faster cuts. The gearbox and blade guard are made from robust aluminium for greater durability. This circular saw incorporates an easy-to-use tool free depth adjustment, 65mm at 90°/ 50mm at 45°, that allows for quick adjustments saving time and ease. Fitted with an over moulded rear handle for improved comfort and grip whilst cutting longer materials. Its also Airlock compatible dust extraction system for safer cleaner environment. Tool connect ready for jobsite connectivity of inventory management (Tag Not Included). DCS577T2: 2 x 18/54V 6.0/2.0Ah Li-ion Batteries.DCS577N: Bare Unit, No Battery or Charger. Specification: No Load Speed: 5,800/min.Max. Cutting Depth: 65mm @ 90º, 50mm @ 45°Blade: 190 x 30mm BoreThe DEWALT DCS577T2 FlexVolt XR High Torque Circular Saw is supplied with: 2 x 18/54V 6.0/2.0Ah Li-ion Batteries1 x 18/54V FlexVolt Li-ion Charger
The DEWALT D25899K SDS Max Demolition Hammer (10kg class) is a powerful yet lightweight Breaker with in-line design for better handling and quick-change chisel adjustment for fast orientation of the chisel through 12 preset positions. The large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance. Its ergonomic inline design ensures user comfort during any application. Whilst its compact, streamlined design allows access in confined areas. In line design for better handling and quick change chisel adjustment allows fast orientation of the chisel through 12 preset positions Modular design allows for quick access to key components allowing for faster and cheaper servicing. 1500 Watt, 95 mm motor delivers outstanding motor efficiency and durability, magnesium housings ensure maximum durability and minimum weight. Multi adjustable side handle can be located anywhere on the hammer barrel, maintaining user comfort in any application. Supplied with: 1 x Multi Position Side Handle and 1 x Heavy-Duty Carrying Case. Specification Input Power: 1,500 Watt.Impact Rate: 1,020-2,040/bpm, 17.5 Joules.Chuck: SDS Max.Length: 650mm.Height 250mm. Weight 9.6kg.DEWALT D25899K SDS Max Demolition Hammer 1500 Watt 240 Volt Version.
Wagner Control Pro 350 M Airless Sprayer for all painting jobs, including medium to large objects. Equipped with high-efficiency airless technology, utilising reduced pressure and a new innovative nozzle, the Control Pro 350 M guarantees streak-free, perfect paint coverage. Suitable for all solvent and water-based paints, varnishes and wood preservatives, as well as emulsion and latex paints. Can be used, with up to 55% less over-spray compared with conventional Airless spraying. The high-quality airless gun is fitted with a two-finger trigger and 15m ultra-flexible hose for maximum operating comfort. Comes with a telescopic handle cart that saves space during transportation and storage, it's also easy to move around the workplace. Specification: Input Power: 600WMax. Spraying Pressure: 110 barSurface Coverage: 15m² per 2 min.Paint Delivery Rate: 1.5 L/min.Tank Capacity: Direct ConnectionAir Hose Length: 15m
Olympia Tools® Hammer Drill with a powerful motor that offers hammer and rotary drilling. For ease of use, it has a variable speed pre-selection dial. It also offers forward and reverse rotation. Supplied with a side handle and depth gauge. Specification: Chuck: 13mm KeylessInput Power: 600WNo Load Speed: 0-3,000/min.Impact Rate: 0-50,400/bpmCapacity: Masonry 13mm, Steel 10mm, Wood 20mmWeight: 1.97kg
