The Black & Decker BDCR18C1 Reciprocating Saw is perfect for cutting into wood, metal and plastic. It has a tool-free blade change saving time and effort when changing the blade. The compact, lightweight design incorporates an anti-slip soft grip handle for added comfort. Part of the 18V POWERCONNECT™ battery system, the interchangeable cordless battery system that works with all BLACK+DECKER® 18V cordless products. Supplied with: 1 x Blade, 1 x 18V 1.5Ah Li-ion Battery and 1 x Charger. Specifications: Strokes at No Load: 0-3,000/min.Stroke Length: 22mm.Sound pressure (LpA): 79.5 dB(A).Blade Length: Up to 30cm Long.
The DEWALT DCR029 Compact Bluetooth® Radio is a compact and robust DAB(+) AM/FM jobsite radio and can be powered by mains or by DEWALT 12-18V XR Li-ion batteries, including XR FlexVolt batteries. It also streams audio from any Bluetooth® enabled device. The 30W speakers and customisable equalizer provide excellent sound quality. Jobsite ready, with an integrated roll cage for increased protection and handle for easy transportation. There's also a USB charging port and auxiliary input to allow wired connection of other devices. Bare Unit - No Battery or Charger supplied. Specification: Radio Range: DAB(+) AM/FMInput Power: Battery 12-54V Li-ion, DC 230/240VDimensions: 300 x 220 x 170mmWeight: 3.6kg
The DEWALT DCC018N XR Triple Source Inflator is a compact and lightweight, high-performance inflator with a durable easy-to-use design. The digital gauge allows you to preset desired 'psi' and pressure display for easy display and ease, whilst the automatic shut-off feature prevents over inflation. Ideal for tackling big tasks thanks to its high/low pressure output. The inflator is capable of inflating at a rate of up to 0.35L/min. @ 6.2 bar or 0.6L/min. @ 2 bar. Includes: 1 x 12V Car Power Adaptor and 3 x Accessory Bits. Bare Unit, No Battery or Charger Supplied. Specification: Units of measure: bar, kPa, psiOutput: up to 0.35L/min. @ 6.2 bar, 0.6L/min. @ 2 barWeight: 2.7kg
The DEWALT DCF892 XR Impact Wrench has an efficient brushless motor and 1/2in square drive plus detent pin allowing for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpmMax. Torque: 812NmBreakaway Torque: 1152NmWeight: 1.6kg (without battery)The DEWALT DCF892N XR Brushless High Torque 1/2in Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).The DEWALT DCF921D2T XR Brushless 1/2in Impact Wrench is supplied with: 2 x 18V 2.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DWE4206 115mm Mini Grinder is fitted with a no-volt release switch that prevents the unit from starting unintentionally when locked on. The switch must be consciously reset before power is delivered. Soft start reduces movement of the tool on start up increasing user control and there is a high efficiency motor that improves performance, even in demanding applications. The dust ejection system removes the majority of debris from the air which passes over the motor, preventing abrasion and tracking. It has a new guard design that allows guard fitment, adjustment or removal without the use of tools, for increased flexibility. A side positioned spindle lock gives greater protection to the button when using in confined spaces. The grinder as pop off brushes that protect the armature from damage at the end of brush life resulting in greater motor durability. It has a small girth that allows comfortable gripping and it has a low profile gear case, that allows access in confined areas. There is also an anti-vibration side handle to improve user comfort, anti lock flange that prevents flanges from permanently locking up and locking the disc on and fully leaded stator windings for increased motor durability. Specification Input Power: 1,010W. No Load Speed: 11,000/min.Max. Disc Diameter: 115mm. Spindle: M14. Length: 285mm.Weight: 2.1kg.DEWALT DWE4206K-GB 115mm Mini Grinder With Kit box 1010 Watt 240 Volt Version
The DEWALT DCV5801H Wet Dry Vacuum Replacement Filter features a H.E.P.A. filter that traps 99.97% of dust, as small as 0.3 microns. It wet and dry capabilities means change over time has been eliminated. The filter is washable and reusable, just rinse clean with water. Fits the DCV582 XR Li-Ion Vacuum.
The DEWALT DCV586M XR FlexVolt Dust Extractor is M-Class compliant, <0.1% dust escape through filter, making it suitable for use on construction sites. Fitted with a brushless motor that provides powerful and constant suction power, even with the finest concrete and wood dust. Innovative dual filter cleaning system maintains performance during tough construction applications. The filter is automatically cleaned every 30 seconds, reducing filter clogging and delivering constant air flow. An audible alarm alerts user if a drop in performance occurs. The extractor features a key fob remote which enables wireless activation of the unit away from the switch for ease of use, saving time and effort. The TSTAK™ compatibility enables ease of use, enhanced mobility and flexible storage. Wet and dry capacity for maximum clean up flexibility. DCV586MT2: 2 x 18/54V 6.0/2.0Ah Li-ion BatteriesDCV586MN: Bare Unit, No Battery or Charger Specification: Voltage: 18/54VCapacity Wet/Dry: 7.5/11 LitreMax. Air Flow: 24.7L/sec.Hose Nozzle Outside Diameter: 32mmThe DEWALT DCV586MT2 XR FlexVolt Dust Extractor is supplied with: 2 x 18/54V 6.0/2.0Ah Li-ion Batteries1 x DCB118 Fast Charger1 x Extraction Hose 2.4m x 32mm1 x AirLock Adaptor 3mm1 x Stepped Rubber AirLock Adaptor 1 x Key Fob1 x Strap1 x Fleece Dust Bag DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 volt products and offering increased run time.
The DEWALT Replacement DCV5861 M-Class Filters for use with the DEWALT DCV586M XR FlexVolt Dust Extractor. The filters can be used both within wet and dry applications. The pack contains 2 replacement filters. M-Class certified to meet EU legislation, HEPA certified.
The DeWALT DCF860N XR Impact Driver has a high performance brushless motor which extends tool life and allows for a much shorter design. It also features a 3 mode switch for enhanced control. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode, provides 20 minutes of bright continuous light.Comes as a Bare Unit, NO battery or charger supplied.Specifications:No Load Speed: 0-1,800/0-2,800/0-3,800/min.Impact Rate: 0-4,400/bpm.Max. Torque: 282Nm.Weight: 1.09kg.
The DeWALT DCF870N XR Hydraulic Impact Driver has a powerful brushless motor delivering high performance, extends tool life and allows for a much shorter design. The quiet hydraulic mechanism delivers high speed application with reduced impact noise. It also features a 3 mode switch for enhanced control. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode, providing 20 minutes of bright continuous light.Comes as a Bare Unit, NO battery or charger supplied.Specifications:No Load Speed: 0-1,100/0-3,000/min.Impact Rate: 0-4,200/bpm.Weight: 1.32kg.
The DEWALT DCF923 XR Impact Wrench has an efficient brushless motor and 3/8in square drive with hog ring for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Supplied as a Bare Unit - No Battery or Charger. Specification: Bit Holder: 3/8in Hog RingNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)
The DEWALT DWS780 is a 305mm Compound Slide Mitre Saw offering outstanding cutting performance in both small profiles and large construction timbers. XPS shadow line cut indicator which provides a fast accurate alignment of the blade while illuminating the workpiece for increased productivity no adjustment required. Heavy-duty durability with the ability to fully adjust the machine to maintain accuracy over the life of the tool. Quick release bevel stop setting provides accurate and simple setting of bevel angles up to 49° left and right. Cam action mitre lock function makes mitre setting faster and easier allowing the user to quickly angles between 0° - 50° left and 0° - 60° right. Supplied with: 1 x 305mm 60 Tooth Blade, 1 x Blade Spanner, 1 x Dust Bag and 1 x Material Clamp. Specification Input Power: 1,675WNo Load Speed: 1,900 - 3,800/min.Blade: 305 x 30mm BoreCapacity (mm): 90°/90°: 303x110, 90°/45°: 211x112, 45°/90°: 268x63, 45°/45°: 212x76Mitre Capacity (Right/Left): 60°/50°Bevel Capacity: 49°/49°Weight: 24.8kgDEWALT DWS780 305mm Sliding Compound Mitre Saw 1675W 240V Version.
The DEWALT DCV586M XR FlexVolt Dust Extractor is M-Class compliant, <0.1% dust escape through filter, making it suitable for use on construction sites. Fitted with a brushless motor that provides powerful and constant suction power, even with the finest concrete and wood dust. Innovative dual filter cleaning system maintains performance during tough construction applications. The filter is automatically cleaned every 30 seconds, reducing filter clogging and delivering constant air flow. An audible alarm alerts user if a drop in performance occurs. The extractor features a key fob remote which enables wireless activation of the unit away from the switch for ease of use, saving time and effort. The TSTAK™ compatibility enables ease of use, enhanced mobility and flexible storage. Wet and dry capacity for maximum clean up flexibility. DCV586MT2: 2 x 18/54V 6.0/2.0Ah Li-ion BatteriesDCV586MN: Bare Unit, No Battery or Charger Specification: Voltage: 18/54VCapacity Wet/Dry: 7.5/11 LitreMax. Air Flow: 24.7L/sec.Hose Nozzle Outside Diameter: 32mmThe DEWALT DCV586MN XR FlexVolt Dust Extractor is supplied with: 1 x Extraction Hose 2.4m x 32mm1 x AirLock Adaptor 3mm1 x Stepped Rubber AirLock Adaptor 1 x Key Fob1 x Strap1 x Fleece Dust Bag No Battery or Charger Supplied.
DEWALT DCF403 XR 3/16in Riveter with a tool-free nose piece and powerful brushless motor delivering longer run times, less maintenance and better power control. Its 25mm stroke length allows for fastening rivets in one stroke. Suitable for installing aluminium, steel and stainless steel blind rivets up to 4.8mm. The on-board mandrel collector store spent mandrels. Fitted with an ergonomic comfort grip handle for increased balance and tool control. There is also a bright integrated LED work light that enhances the work area in low light areas. Supplied with: 1 x 18V 1.7Ah POWERSTACK™ Li-ion Battery.1 x Charger.1 x TSTAK™ Kitbox. Specifications: Rivet Diameter: 4.8mm.Stroke Length: 25mm.Max. Force: 10kN.
The Panasonic EYC242LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball DetentNo Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpmMax. Torque: 280NmTensile Bolt Capacity: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.DEWALT DCN660N XR Brushless Second Fix Nailer 18 Volt Bare Unit, No Battery or Charger Supplied.
Bosch GBH 5-40 D SDS-Max Professional Rotary Hammer features robust metal components and an optimised lubrication system for increased durability. Its lightweight and compact design makes it ideal for work in hard-to-reach places. The strong motor enables the delivery of 8.5 J of impact energy for a fast drilling progress and high material removal rate. This tool is intended for drilling up to 40mm in diameter as well as light chiselling work in concrete and stone. It is compatible with various dust attachments. The GBH 5-40 D Professional also features a Rotation Control Clutch and Speed Selection. Supplied with: 1 x Auxiliary Handle, 1 x Grease Tube, 1 x Machine Cloth and 1 x Carrying Case. Specifications: Tool Holder: SDS-Max.Input Power: 1,100W.Impact Rate: 1,500-2,900/bpm.Impact Energy: 8.5 Joules.Drilling Diameter: Concrete, Hammer Drill Bits 12-40mm, Opt. Appl. Range Concrete, Hammer Drill Bits 18-32mm, Concrete, Breakthrough Drill Bits45-55mm, Concrete with Core Cutters40-90mm.Weight: 6.8kg.
The DEWALT DCW220NT XR 18V Belt Sander has a brushless motor for extended durability, efficiency and power. It also has a high no load speed, which is variable to provide ultimate speed and application control.The sander features a direct AIRLOCK dust port and wireless tool control to ensure a cleaner and safer jobsite. WTC™ allows for remote switching on of the dust extractor when the sander is started (requires compatible DEWALT dust extractor). A quick-release belt change system allows sanding belts to be changed effortlessly. Class leading DEWALT ergonomics ensure maximised comfort and safety. Supplied in a T-STAK VI Kit Box. Includes:Dust Bag.Rotating Dust Port.Sanding Belt, 80 Grit. Bare Unit, No Battery or Charger supplied. Specifications: Belt Speed: 320m/min.Belt Size: 75 x 533mm.Weight: 3.0kg.
The Bosch GWS 9-115 S Angle Grinder is fitted with a powerful motor and variable speed selection for increased control when working on different materials. With overload capacity for increased safety. The small grip diameter and ergonomic design make it comfortable and easy to handle. Specifications: Input Power: 900W.No Load Speed: 2,800-11,000/min.Disc Diameter: 115mm.Spindle Thread: M14.Weight: 1.9kg.
The Bosch GIC 12V-5-27 C Professional Inspection Camera has a large 5in display with a high-definition resolution of 1280 x 720 pixels for an in-depth view when investigating pipes, ducts, or other hard-to-reach areas. No matter which direction the camera head is facing, there's no need to reinterpret the image direction during use because of the AutoUp function. This enables optimal spatial orientation by automatically turning the image the right way up. The robust camera is designed to endure dust and water on tough job sites. It comes with an IP67 rating for the camera head, protecting it from dust and short periods of immersion in water, and IP54 dust and splash water protection for the tool. With the GIC 12V-5-27 C Professional, photos and video footage are easily transferred via USB-C cable or Micro-SD card. The inspection camera is perfectly suited for many tradespeople applications such as, for example, inspecting the interior of distribution boxes, pipes, and wall cavities as well as for hydraulic systems and applications in the automotive sector. Max. 30 min immersion for camera cable in: diesel, petrol, engine oil, AdBlue, ethyl alcohol, salt water (26.5% salt content). Can be powered by a 12V Li-ion battery or with 4 x AA Batteries (adaptor required). Specifications: Display Size: 5in.Display Resolution: 1280 x 720 px.Diameter of Camera Head: 8.3mm.Length of Camera Cable: 150cm.Field of View (FOV): 75 degree.Focus Distance: 30 - 80mm.Photo Resolution: 1280 x 720.Video Resolution: 1280 x 720.Data Transfer: USB-C, Micro-SD Card.Dust and Splash Protection: Camera Cable IP67, Tool IP54.Weight: 0.7kg.
The Bosch GKF 18V-8 Professional Cordless Palm Router features a powerful brushless motor. This palm router has the most compact height on the market to minimise top-heaviness and maximise tool control, hands-free spindle lock for hassle-free bit changes, and a fine cutting depth adjustment placing a superior routing experience in the palm of your hand. Purpose-built surface and edge routing vacuum adaptors provide highly efficient dust collection in all situations. Compatible with a wide range of accessories to satisfy all aspects of palm routing, from light edge profiling to more demanding surface routing tasks.Comes as a Bare Unit, NO Battery or Charger.Supplied with: 1 x Parallel Guide, 1 x Collet with Nut 1/4in, 1 x Surface Routing Dust Extraction Adaptor, 1 x Edge Routing Dust Extraction Adaptor, 1 x Chip Shield 1 x Wrench 17mm.Compatible with all Bosch Professional 18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance.Specifications:Collet: 6mm, 1/4in, 8mmNo Load Speed: 10,000 – 30,000/min.Weight: 1.1kg excl. battery
This Bosch GW S9-115 P Professional Grinder comes with a paddle switch for increased user safety. Power to the machine instantly cuts off when the switch is released. Fitted with a highly efficient 900W motor, this provides a superior cutting and grinding experience. Its robust design and components provide a long lifetime, even under tough working conditions, and heavy workloads. The ergonomic paddle-shape design and slim grip size provide best in-hand control. Specifications: Input Power: 900W.No Load Speed: 11,000/min.Disc Diameter: 115mm.Grinding Spindle Thread: M14.Weight: 1.9kg.
The Evolution R230RCP Multi-Material Reciprocating Saw has been designed to cut a wide range of materials from green wood to metal. Comes fitted with an ergonomic, soft grip, 180û rotating handle for maximum control and versatility without having to adjust the blade. Fully tool-less blade changes and adjustments for quick and easy use. The LED light improves visibility and precision for accurate work in low-light conditions, whilst the 3m cable length gives freedom within the workspace. Supplied with 4 single-purpose blades for the dedicated cutting of thin steel, green wood and general wood, along with a multi-material blade to increase productivity, allowing you to cut through a range of materials including plastic, copper, wood and metal. Specification: Input Power: 850WNo Load Speed: 0-2,400/min.Stroke Length: 28mmRear Handle Rotation: 180°Weight: 3.2kg
The Metabo MFE40 FE Wall Chaser is ideal for electric installations, to lay cables and empty pipes under plaster with cutting depths up to 40mm. Fitted with a powerful Marathon motor for increased performance and patented dust protection for long service life. Tacho-Constamatic (TC)-Full Wave Electronics provide fast work progress by means of constant speed under load. With electronic soft start and restart protection for safe working. LED signal informs about overload or active restart protection. The Metabo S-automatic safety clutch provides mechanical decoupling of the drive for safe working should the disc stop unexpectedly. Fitted with a robust aluminium die-cast hood and optimal handle position for comfortable guiding of the machine. Pushing cut for optimal view of the marking line. The channel width and cutting depth can be set . Specification: Input Power: 240V 1,900W, 110V 1,700WNo Load Speed: 5,000/min.Cutting Depth: 10-40mmGroove Widths: 9, 15.5, 22, 28.5, 35mmTorque: 6NmDisc Diameter: 125mmWeight: 4.6kgThis Metabo MFE40 FE 125mm Wall Chaser 1900W 240V is supplied with: 2 x Diamond Cutting Discs1 x Set of Spacer Rings1 x Flange Nut1 x Face Pin Wrench1 x Chase Chisel1 x Plastic Carry Case
The Einhell TE-MS 18/210 Li Solo Mitre Saw is a member of the Power X-Change family, it is a versatile tool for use in the work shed, garage and hobby room. Quickly adjustable settings make it possible to perform work on materials such as wood, panels, all sorts of plastic, or parquet flooring with almost effortless ease. The turntable has an exact angle adjustment facility for angular cuts. The saw head can be tilted to the left for exact mitre cuts. X-Tend workpiece supports enable the settings to be adjusted with just one hand and without the need for any tools. For repeat cutting there is an integrated limit stop. The high-quality carbide-tipped precision saw blade was developed specially for cordless saws. The sawdust bag or the chip extraction system (extractor connection Ø36mm) help keep the workplace clean and tidy and prevent the accumulation of dust in the air. The compact and low-weight design along with the carry handle make it easy to transport. Other features include: an integrated clamp, cutting line laser and an LED work light. Bare Unit, No Battery or Charger Supplied. Recommendation for best results: 2.6Ah Plus battery or higher. Specification: No Load Speed: 3,000/minBlade: 210 x 30mm BoreMitre Cut: 45° - 0°Swivelling Range: 47° - 47°Cutting Capacity: 90° x 90°: 120 x 60mm, 90° x 45°: 83 x 60mm, 45° x 90°: 120 x 34mm, 45° x 45°: 80 x 34mmSuction Adaptor: Ø36mmWeight: 7kg
The DEWALT DCN680 Brushless XR 18 Gauge Brad Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use but durable enough for the work site environment. Mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Fitted with a brushless motor that offers increased runtime and durability. Trigger and contact trip lock-off prevent accidental discharge of fastener. With tool free stall/jam clearance to minimise down time. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. Two modes of operation: Sequential mode allows for precision placement, Bump operating mode provides the user with production speed of up to 4 nails per second. DCN680D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN680N: Bare Unit, No Battery or Charger. Specification Magazine Capacity: 110.Fires: Nails: Length: 15-54mm. Diameter: 1.25mm.Nailer Operating Mode: Bump & Sequential.Magazine Angle: 0°.Weight: 2.4kg.The DEWALT DCN680N Brushless XR 18 Gauge Brad Nailer is supplied as a Bare Unit, NO battery or charger.
The DEWALT DCG418X2 XR FlexVolt Grinder is supplied with: 2 x 54V 9.0Ah Li-ion Batteries1 x Side Handle1 x Keyless Guard1 x Blade Wrench1 x DCB116 Charger1 x TSTAK™ II Carry Case
The Makita DBO480 LXT Finishing Sander is equipped with a 2-speed electronic speed control system and a tool-less paper clamp for quick working. A redesigned balancer reduces the tool vibration in loaded operation.This Makita sander is ergonomically designed to provide the best possible grip for comfortable handling, and dust is kept to a minimum, in two ways, either thanks to the rear mounted bag or the dust port can be used to attach a dust extractor. The perfect tool for carpenters, fitters, joiners and DIY enthusiasts. Comes as a Bare Unit, NO battery or charger supplied. Supplied with: 1 x Triangle Plate, 1 x Dust Bag, 1 x Abrasive Paper Set, 1 x Dust Bag Nozzle, 1 x Dust Nozzle and 1 x Punch Plate. Specifications: Oscillating Speed: 28,000/22,000/min.Orbits per Minute: 14,000/11,000/opm.Orbit Diameter: 1.5mm.Paper Fastening: Hook & Loop or Clamp.Pad Size: 112 x 102mm.Paper Size: 114 x 102mm.Weight: 1.4kg.
