CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grade steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 300mm.
Faithfull Forstner Bits are designed with durability, accuracy, and ease of use in mind. Manufactured from forged, hardened steel for increased longevity, they feature an ultra-sharp spur to provide accurate hole drilling without walking on the material. The steep, angled cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip removal. The centre point aids in drilling straight, angled, and overlapping holes in softwood and hardwoods, veneered wood, and non-laminated chipboard.nCompatible with all drill drivers and bench drills with a standard 8mm chuck.
1 x Faithfull Forstner Bit 16mm.
The DEWALT DXVA19-1300 Utility Nozzle is ideal for cleaning in tight spots thanks to its narrow head (17.5cm width).Compatible with 48mm (1.7/8in) vacuum hoses.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 3.2 mmD = 19 mmC = 9.5 mmBearings = 9.5 and 12.7 mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. 1/2 in Shank.C = 25 mmD = 19.1mm 3/4in
Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal.Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Progressive tooth spacing, for fast cuts, long life, in sheet metal 2-10mm, non-ferrous metal 2-20mm, stainless steel 1.5-3mm, plastic 1.5-30mm, fiberglass 1-20mm.Length: 132mm.Pitch: 24. Supplied in a pack of 5.
These Blue Spot Sanding Flap Discs are suitable for efficient stripping and sanding of metal and wood surfaces. They are ideal for finishing. This 3 piece set includes the following:40 Grit, 60 Grit and 120 Grit. Each sanding flap disc has the following specifications:Diameter: 115mm.Bore size: 22.2mm.Max speed: 13,300/min, 80m/s.
The IRWIN Impact Stubby Right Angle Head is equipped with long-life, impact resistance gears. Allows you to install screws at an angle of 90 deg;. The holder has a magnet protecting the bits from falling out. Equipped with an additional handle. The 1/4in hex handle allows use in impact screwdrivers and drills. Specifiations: Head Length: 65mm.Head Width: 38mm.
The Bahco 59/S100BC Bit Set contains a wide selection of bits suitable for universal use. Each bit is made from high-performance alloy steel. TORX bits are colour coded to easily identify the size of the tip. Supplied in a durable carry case. Contains:17 x 25mm Phillips Bits: PH1(x2), PH2(x9), PH3 and PH2G(x5).12 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x9) and PZ3.50 x 25mm TORX Bits: TX10(x3), TX15(x5), TX20(x15), TX25(x8), TX27, TX30(x15) and TX40(x3).5 x 25mm TORX Tamper-Resistant Bits: TTX10, TTX15, TTX20, TTX25 and TTX30.2 x 25mm Slotted Bits: 4.5 and 5.5mm.9 x 25mm Hexagon Bits: 3, 4(x3), 5, 6(x3) and 8mm.2 x 25mm Robertson Bits: #1 and #2.1 x KM653 Magnetic Universal Bit Holder.1 x KM653-QR Magnetic Quick-Release Bit Holder.1 x Socket Adaptor 1/4in.
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dirt, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity. 1 x Lessmann X-Lock Steel Knot Wheel Brush 125mm Non Spark
The special shape of the bevel brush enables the user to work in hard to reach places. They have been designed for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste. Diameter: 100mm.Width: 10mm.Bore: M14.Wire Gauge: 0.35.Wire Type: Steel STA Crimped.Max. R.P.M.: 12,000.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett RG FB Carbon Bandsaw Blade 1,511 x 6 x 0.35mm x 10T.
This Faithfull Wire Cup Brush has been designed for use with angle grinders that have a compatible thread. Suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Perfect for use on stainless steel. When standard wire brushes are used on stainless steel they can contaminate the material and cause rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Specification: Diameter: 65mmThread: M14 x 2Wire: Twist Knot Stainless Steel Grade 304, 0.50mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 50 mmD = 12 mm 15/32 in
Faithfull Chisel steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Chisel. Length: 380mm. Width: 25mm.Fitting: 21mm Hex shank, Kango (900/950K).
These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 38mm
IRWIN Mouse Sanding Finger Sheets for very detailed sanding. Velcro attachment provides reduced space between the sanding sheet and allows for higher removal rate. Compatible with the sanding finger often supplied separately with a palm sander from the BLACK+DECKER Mouse KA161, KA168, KA1000, KA2000, BEW230 and Bosch Primo. Specification: Grits: 5 x K120, 5 x K180 and 5 x K240.
The IRWIN Drill Screwdriving Set is supplied in a compact carry case and contains the following: 5 x Metal Drill Bits: 2, 3, 4, 5, 6mm. 3 x Masonry Drill Bits: 5, 6, 8mm. 2 x 25mm Phillips Bits: PH1, PH2.3 x 25mm Pozi Bits: PZ1, PZ2, PZ3.2 x 25mm Slotted Bits: 4.0, 6.0mm. 1 x Magnetic Bit Holder.
Faithfull X-LOCK Conical Wire Brush is for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on stainless steel surfaces, aluminium and non-ferrous metal surfaces. Using standard wire brushes on stainless steel can contaminate and cause the material to rust. Featuring the X-LOCK quick change system, ensuring a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Specifications: Wire Type: Twist Knot Stainless Steel (304).Diameter: 115mm.Fitting: X-LOCK.Wire Size: 0.5mm.Max. RPM: 12500.
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 104 - 14MTo suit. 115 mm Mini Grinders.Thread. M14 x 2. Abrasive Disc Size 115 mm x 22 mm (4.1/2in). Machines Fitted. AEG, Black and Decker P5411, Bosch, Casals, Felisatti, Flex, Hitachi, Kress, Makita, Metabo, Ryobi, Sealy, Skil, Stayer, Taskmaster. Pin Spanner - Red
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 15 SKU BT1315GA Finish GALV Description MINIBRADS 15 GALVA 5M Qty per box 5000
The SCANGRIP NOVA C&R DUAL SYSTEM COB LED Work Light can be powered by its built-in, rechargeable Li-ion battery or by plugging into the mains (240V). A user friendly display shows both battery capacity and remaining operating time. It features the latest COB LED technology and a five-step dimming function enabling the light output to be adjusted within a 10% to 100% range. The sturdy die-casted aluminium construction is perfect for use in demanding rough working environments. Integrated carrying handle with a flexible stand can be used as a hanger enabling the work light to be positioned to the desired angle. It also enables mounting on to the SCANGRIP Tripod or Scaffolding Bracket (both SOLD SEPARATELY) for extra versatility. The CRI value is close to daylight and the SCANGRIP Diffuser (SOLD SEPARATELY) can be used to soften the light and avoid hard shadows. Specification: Mains Cable Length: 5mThe SCANGRIP NOVA 6K C&R DUAL SYSTEM COB LED Work Light can be powered by its built-in, rechargeable Li-ion battery or by plugging into the mains (240V). A user friendly display shows both battery capacity and remaining operating time. It features the latest COB LED technology and a five-step dimming function enabling the light output to be adjusted within a 10% to 100% range. The sturdy die-casted aluminium construction is perfect for use in demanding rough working environments. Integrated carrying handle with a flexible stand can be used as a hanger enabling the work light to be positioned to the desired angle. It also enables mounting on to the SCANGRIP Tripod or Scaffolding Bracket (both SOLD SEPARATELY) for extra versatility. The CRI value is close to daylight and the SCANGRIP Diffuser (SOLD SEPARATELY) can be used to soften the light and avoid hard shadows. Mains Cable length is 5m. Specifications: Luminous Flux, Max./Min.: 6,000/600 Lumens.Illuminance, Max.Min. (@0,5m): 8,000/500 Lux.Illuminance Distance: 0.50m.Beam Angle: 110 degree.Dimensions: 267 x 87 x 262mm.Weight: 2.6kg.
Faithfull Professional 1/4in Hexagon Drive Impact Screwdriver Bits are specifically designed and for use in high torque impact drivers. Manufactured from a unique material specially engineered for extreme durability these bits have an increased working life compared to standard screwdriver bits. Impact bits are designed to distribute impacts evenly, preventing energy waste for efficient screw driving and incorporate torsion areas to absorb torque peaks and to reduce stress at the bit tip during heavy loading. All bits feature a precision machined tip to provide an optimum fit helping to prevent screw stripping and cam-out.These Faithfull Impact Screwdriver Bits have the following specification: Size: PZ2 x 50mm.Pack Size: 3.
A conical twist knot high tensile steel wire circular brush.Conical Twist knot brushes are ideal for work in hard-to-reach places such as edges or corners and are suitable for the removal of slag, rust, scale or even dried cement.Maximum/min 12,500.Diameter: 100 mmThread: M14 x 2Wire: 0.5 mm twist knot steelConforms to ISO 9001. and DIN EN1083-1 and 2
Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.Trend C209 x 1/4 TCT Intumescent Recessor to suit 4mm thick strip of 10mm width. Specification: Diameter: 24mmCutting Depth: 10mmBearing: 16mmShank: 1/4in
Starter cutter set containing a range of 15 popular cutters supplied in a plastic carry case. Including: Single flute, two flute, dovetail, guided round and over guided chamfer, rebater, trimmer, cove and roman ogee, v groove and core box cutters. Size: 1/2in shank. Type: tungsten carbide tipped.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 180mm.Bore: 16mm.Teeth: 40.Bush: 20mm.Rake: POS.
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 60 x 30mmGrade Medium (80 Grit)
The Rohm EXTRA-RV 40 Plastic Keyless Chucks are for corded and cordless drills, with or without a spindle stop, up to a maximum torque of 60Nm and up to 650 Watt. These impact-resistant, quick-action drill chucks have a radial locking plastic sleeve. With a through-hole for use with a locking screw. 1261217 has a retaining ring for machines without spindle stop.The Rohm 1261217 EXTRA-RV 40 Plastic Keyless Chuck has a radial locking plastic design with a retaining ring and a through-hole.
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of sizes and wire styles are available.Diameter. 80mm.Wire Height. 22mm.Bore. M14.Wire Gauge. 0.30.Wire Type. Stainless.Max. R.P.M. 8,500.
