These Faithfull Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S918H Sabre Saw Blades are ideal for medium to thick sheet metal (3-8mm) fine, closed pipes and profiles (10-100mm). Specification: Length: 150mm (6in)Teeth: 10 TPI
The Trend Mortice & Tenon Jig MT/JIG enables mortice, tenons and dowel joints to be cut with a router. Ideal for cabinets, chairs and table joints. There is a one set-up system for both mortice and tenon giving perfectly fitting joints and is fully adjustable for compound angle joints up to 45º. The reversible templates can be used to produce round and square end tenons and for accurate dowelling applications. It cuts mortice and tenon sizes of 1/4in (6.35mm) to 5/8in (15.9mm). A Unibase may be required for certain makes and models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl N.CNC precision manufactured plates and body. Guide bushes are included but cutters are required. Specification Material Thickness: 12 - 47mm.Tenon Thickness: 4.8 - 16mm.Angle Tilt Compound: -10º to 45º.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 12.7 mm 1/2in. Cutting Length: 19 mm. Shank Diameter: 1/4in.
These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.These Faithfull Wood Jigsaw Blades T119B provide stright cuts. Ideal for epoxy, hardwood, softwood, laminated boards, insulated and heat insulation materials and plastics.
These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.These Faithfull (T101D) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics.
Three heavy-duty 14 meter 110V trailing leads available in 1.5mm or 2.5mm cable and 16 or 32 amp versions. All leads are fitted with an industrial plug and socket to BSEN60309 providing ingress protection to IP44 and added durability and protection from being dropped or dragged around. Trailing leads are ideal for use with transformers, site lights and power tools to extend their working range. 110VLength: 14m110V 16 amp socket110V 16 amp plug1.5mm cable
These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S1411D Sabre Saw Blade is ideal for coarse wood (20-250mm), wooden panels (up to 150mm), boards, plywood, plastic, pruning green wood (up to 250mm) and is fast cutting. Specification: Length: 300mm (12in)Teeth: 6 TPI
This Faithfull Saw Blade has a broad range of applications with side set, hardened teeth, for fine straight cutting in soft wood, plastics, plasterboard, plastic pipes and similar materials. Compatible with many multi-function oscillating power tools.Width: 34mm.
Designed for use with angle grinders with a compatible thread and are suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Wire: High tensile twisted steel Type: CupFace Diameter: 65mmThread: M14 x 2Wire: 0.5mmConforms to ISO 9001 and DIN EN1083-1 and 2Maximum rpm 12,500.
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup Maximum speed: 12,000/min.Face diameter: 70 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm Stainless steel Conforms to ISO 9001. and DIN EN1083-1 and 2
This Faithfull radial saw blade has a broad range of applications and is ideal for flush and plunge cutting. With wavy set, hardened teeth. For sawing woods, plastics and plasterboard. Compatible with many multi-function oscillating power tools.
The Faithfull SK7 Sharp Scraper Blade is perfect for fast, clean and deep cutting. Ideal for cutting soft expansion joints, window sealing putty and insulation materials. Manufactured from high-carbon SK7 steel for a long working life. Compatible with many multi-function, oscillating power tools. Specification: Cutting Length: 100mmWidth: 8-28mmMaterial: SK7 blued steel
Thie Faithfull Bit Holder is designed to hold a screw via the magnetic sleeve to allow for hands free operation and is ideal for drywall applications. Length: 58mm.
This Faithfull Wire Cup Brush is designed for use with angle grinders with a compatible thread. It is suitable for industrial use and more specialist applications. Crimped wire brushes are designed for lighter to medium-duty applications such as cleaning metal surfaces prior to painting.Wire: Steel Type: Cup Face Diameter: 150mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 6,500.
This Faithfull Wire Cup Brush is designed for use with angle grinders with a compatible thread. It is suitable for industrial use and more specialist applications. Crimped wire brushes are designed for lighter to medium-duty applications such as cleaning metal surfaces prior to painting.Wire: Stainless Steel Type: Cup Face Diameter: 100mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 8,500.
Faithfull Professional Security Screwdriver Bits are designed for use with tamper-resistant, security TORX (Star) head fixings which have a small pin inside their drive recess to prevent the use of a standard TORX driver, tamper-proof fixings of this type are often found on electrical appliances. Manufactured from high-strength, heat treated ‘S2’ grade steel. These bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.Pack of 3 Faithfull Security S2 Grade Steel Screwdriver Bits T10S x 25mm
This Faithfull Wire Cup Brush is designed for use with angle grinders with a compatible thread. It is suitable for industrial use and more specialist applications. Crimped wire brushes are designed for lighter to medium-duty applications such as cleaning metal surfaces prior to painting.The FAIWBC60 Wire Cup Brush has the following specifications: Wire: Steel. Type: Cup. Face Diameter: 60mm. Thread: M14 x 2. Wire: 0.3mm. Conforms to ISO 9001 and DIN EN1083-1 and 2. Maximum speed: 12,500 rpm.
A boxed selection of thirty six grinding wheels of assorted sizes and grits with a 1/4inch shank to suit most electrical and cordless drills. They are ideal for sharpening and grinding steel, and the pack contains six each of the following. 77 mm Dia. X 12 mm Fine50 mm Dia X 12 mm Fine37 mm Dia X 24 mm Fine65 mm Dia X 6 mm Coarse50 mm Dia X 6 mm Fine15 mm Dia X 24 mm Coarse SAFETY TIPFaithfull grinding wheels are for use in power or cordless drills only and are not suitable for use in die grinder or high speed air tools.
A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles.The Faithfull FAIWBWW150 conforms to ISO 9001 and DIN EN1083-1 and 2 and has the following specifications:Diameter: 150mm x 23mm faceBore size: 32mm (25, 22, 20, 16 &12mm bushes included)Wire: 0.3mmType: Circular
These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.These Faithfull (T101B) Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics.
