The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2205-QZ (T101B) XPC HCS Wood Jigsaw Blades provide clean and fast straight cuts in wood, chipboard and plastics.
The Faithfull Quick Change Bit Set is a useful addition to any toolkit, containing 24 of the most popular bit types. These screwdriver bits have been manufactured from hard-wearing S2 steel to provide a long working life and, when used in conjunction with the quick-release magnetic bit holder, they can be swiftly changed without the need to open the drill chuck. Supplied in a sturdy plastic storage case. Contains: 8 x 25mm Pozi Screwdriver Bits: PZ1(2), PZ2(3) & PZ3(3)3 x 25mm Phillips Screwdriver Bits: PH1, PH2 & PH33 x 25mm Slotted Screwdriver Bits: 4, 5.5 & 6.5mm4 x 25mm Hexagonal Screwdriver Bits: 3, 4, 5 & 66 x 25mm Star Screwdriver Bits: T10, T15, T20, T25, T30 & T401 x 1/4in Quick-Release Magnetic Ejector Bit Holder
An open drum 240V volt cable reel with a heavy-duty plastic drum on a sturdy steel frame with an integral carry handle and rotating winding knob, which is popular with both trade and DIY users. The drums design helps ensure that the cable is protected while in storage or transit but also safe while in use, using a thermal overload protection system to prevent overheating damaging the cable. The cable reel features two shuttered plug sockets and a BS approved plug. A flat frame base keeps the reel upright for easy storage and protects the sockets from contact with wet or damp areas. Manufactured to British Standard BS EN 61242. Max Load Fully Unwound: 3120W (13 Amp) Max Load Fully Wound: 1000W (4 Amp) NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.
The Faithfull 240 volt open drum cable reels have a heavy-duty plastic drum on a sturdy steel frame with carry handle and a thermal overload protection system to prevent overheating damaging the cable. They are fitted with twin 240 volt sockets and the 1.25mm² cable is with fitted with a standard 240 volt plug. When using a 240v cable reel outdoors, or in the vicinity of a machine with mechanism which could damage the cable, it is recommended that an RCD device (FPP RCD) is used at the power source in conjunction with the reel. Always check that the power supply matches the voltage on the reel’s rating plate. Never attempt to connect a 240 volt appliance to a 110 volt supply and vice versa. If you need to use a cable reel, select one suitable for the power input of the appliance. Complies to BS EN 61242. NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.This Faithfull Power Plus Open Drum Cable Reel has the following specification: Cable Length: 25 Metres.Voltage: 240 Volt.Fully Unwound: 3120 Watt (13 Amps).Fully Wound: 1000 Watt (4 Amps).
The DEWALT Sanding belts have a heavy-duty backing cloth, resin bonded for use with belt sanders. They provide excellent grain adhesion and heat resistance for power sanding and have a high quality aluminium oxide grain for fast, aggressive stock removal and fine finishing. Anti static bond and backing ensures more efficient dust extraction, improved finish and longer life. Applications: for all stripping, sanding and finishing tasks on wood, metal and painted surfaces.Pack of 3 DEWALT Sanding Belts 560 x 100mm 80g
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 7.0 mm 9/32in. Cutting Length 19 mm Shank Diameter: 1/4in.
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350
Flexovit hook & loop sanding discs are tough and durable, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Hook & Loop backing allows quick and easy disc changing to fit most brands of eccentric sanders. Suitable for use on wood, paint and metal. Size: 125mm. 8 holes.Pack quantity: 25, assorted.
The SMJ White Rubber Trailing Extension Socket conforms to the latest standards of BS 1363/A for heavy use and is rated at 13 amp. It is also fitted with a cable clamp.SMJ White Rubber Trailing Extension Socket 1 Gang
The main reason for blade wear is overheating. When cutting metal and abrasive materials, TrendWax Lubricant will extend sawblade life by keeping the blade cool at the cutting points. Simply use the Trendiwax lubricant stick at regular intervals, applying it directly onto the teeth of the stationary blade. Available in 400g tube.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 4.0 mm 5/32in. Cutting Length: 11 mm. Shank Diameter: 1/4in.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 9.0 mm 11/32in. Cutting Length 19 mm Shank Diameter: 1/4in.
Tungsten carbide cutting edges, suitable for DIY and Professional use. The guide bearing can follow complex and intricate shapes and the cutters are suitable for use on softwoods, hardwoods, MDF and plywood.Supplied with two bearings 9.5 mm and 12.7 mm to enable use as either ovolo or rounding over bits.Diameter 6.5 mmRadius 6.3 mmDepth 13 mm2 x Bearings supplied 9.5 x 12.7 mmShank 1/4in
Faithfull SDS Max chisel steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular machines used in the UK. Type: Chisel.Fitting: SDS Max.FAIMAXC400Length: 400 mm Width: 25 mm
These Faithfull Sabre Saw Blades BIM Demolition are high-quality blades manufactured for precision and stability. These bi-metal, flexible straight-cut blades are designed for making quick, coarse cuts and general demolition work. Manufactured for precision and stability when cutting. They can be used on wood, chipboard, wood with nails/metal, window frames and fibreglass/epoxy up to 100mm thick.The Faithfull S1411DF Sabre Saw Blades are ideal for use on wood, chipboard, wood with nails/metal, window frames, and fibreglass/epoxy up to 100mm thick. Specification: Length: 300mmTPI: 6
These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.These Faithfull T244D Wood Jigsaw Blades provide fast curved cutting. Ideal for hardwood, softwood and laminated boards.
Designed for use with angle grinders with a compatible thread and are suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Wire: High tensile twisted steel Type: CupFace Diameter: 65mm Thread: M10 x 1.25 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.
