The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2209-QZ (T101D) XPC HCS Wood Jigsaw Blades provide clean and fast straight cuts in wood, chipboard and plastics.
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4322 Series 60 Circular Saw Blade has the following specification: Finish: General Purpose.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 40.Plate Thickness: 2.2mm.Kerf Thickness: 3.0mm.Grind: ATB.Rake Angle: +10°.
This Trend 3/75 x 1/2 TCT Two Flute Cutter has the following specification: D: 12mm (15/32in)C: 63mmOL: 114mmShank Diameter: 1/2in Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. The TRE373D12TC & TRE383D12TC cutters are especially suited for drilling. TRE383M12TC has a shorter shank for Makita 3600B and 3612BR, Ryobi and Hitachi Routers.
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.The TR37 is suitable for use use with Trend Lock JigsDimensions:Shank: 1/2 inCutting Diameter: 12mmCutting Length: 63mm.
The quick release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size. 2.0mm. (5/64in)Countersink Size. No.4.
Trend Lapping Fluid is designed solely for the engineering industry. It is ideal for use with diamond abrasives, where other lubricants may be too thick. Use instead of water to reduce the risk of rusting by 95%. Supplied in a flip-top dispenser bottle. Size: 100ml.
Attractive edge moulds and a full corner bead can be produced by making a second pass at 90° . Used on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics. D1 7/8 inch D1 22.3 mm D2 20 mm Cut length 35/64 inch Cut length 14 mm B 12.7 mm R1 3.2 mm Shank Diameter 1/4 inch
Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the work piece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Stone Grinding Disc 115 x 6 x 22.23mm
The IRWIN® Mixed Screwdriving Set is supplied in a robust, compact storage case, designed to hold up against the rigours of daily use. Fitted with an easy-to-use flip-up latch design that keeps cases securely closed when not in use and locks the cases together when stacked. The connectable cases can be customised to create a single storage unit that is both secure and portable. Contains: 7 x 25mm Phillips Bits: PH1, PH2(x5) and PH3.7 x 25mm Pozidriv Bits: PZ1, PZ2(x5) and PZ3.4 x 25mm TORX Bits: TX20(x2) and TX30(x2).3 x 25mm Slotted Bits: 6, 8 and 10mm.3 x 50mm Phillips Bits: PH2.3 x 50mm Pozidriv Bits: PZ2.3 x 50mm TORX Bits: TX20.1 x Magnetic Bit Holder.
Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth for a longer life and fast, even cuts in metal. Straight cuts in metal, non-ferrous metal, aluminium, sheet metal, 1.5-3 mm (1/16Inch -1/8in). Length: 92mm. Pitch: 24 Precise Cut. Supplied in a pack of 5.
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 10 with the following dimensions: T20 x 25mm.
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 10 with the following dimensions: T10 x 25mm.
This Faithfull Sanding Disc is manufactured from Aluminium Oxide abrasive on a flexible paper backing. It is ideal for use on wood, metal and plastics to remove imperfections prior to final finishing. Designed for use on a backing pad (e.g. FAIABP125) in conjunction with any portable electric drill.Pack of 5.Diameter: 125mm.Bore: 6mm.Grade: coarse.
Faithfull 150mm Hook & Loop Sanding Discs made from aluminium oxide abrasive on a flexible E-weight paper backing. With the added convenience of the Hook & Loop quick change system. Pre-punched for use on random orbital sanders with integral dust extraction systems. Suitable for use on wood, metal, plastics and filler. Hole configuration: DID2.1 x Faithfull Hook & Loop Sanding Disc DID2 Holed 150mm x 80g (Pack of 25)
These Faithfull Delta Sanding Sheets are manufactured from Aluminium Oxide abrasive on E-weight heavy-duty paper. They are ideal sanding wood, plastic and fillers. The sheets have a hook and loop system, enabling quick change. Specifications: Type: TR2. Size: 93mm. Pattern: 6 hole.Grade: Coarse. Pack quantity: 5.
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 610 x 100mm 80g
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.Pack of 3 Faithfull Cloth Sanding Belt 400 x 60mm 120g
The Wiha BitBuddy TY Bit Set 7 Piece allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder, and the lasered profile size on the bit base, ensure it is extremely simple to select the right size when removing the bit from the holder.Universal in its use, the multitalented TY bit is suitable for all types of screws (T-shaped and Y-shaped). The ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers and guarantees a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to find, even in the dark by using an UV light, thanks to its fluorescent coating. This reduces the number of bits which are lost and saves on the expense of acquiring new ones.Bits conform to DIN 3126, ISO 1173, Style E6,3 DIN ISO 8764-1. This 7 Piece Set contains the following: 7 x 49mm Pozidriv TY-Bits: PZ1, PZ2 (x5) & PZ3.
The Dormer P807 Solid Carbide Bright Rotary Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With a improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball has the following specification: Diameter: 8mm.Shank Diamter: 6mm.Working Length: 6mm.Overall Length: 52mm.
The DEWALT DT3901 TCT Reversible Planer Blades with tungsten carbide tips. Supplied as a pack of 2.The DEWALT DEWDT3901QZ TCT reversible planer blades (pack of 2) are 82mm. These blades are for use with the following DEWALT planers:DW677, DW678K, DW678EK and DW680K.
Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth for a longer life and fast, even cuts in thin and thick meta metal. Straight cuts in thin metal, non-ferrous metal, sheet metal, aluminium 0.2-1 mm (1/64Inch -3/64in). Length: 92mm. Pitch: 36 Precise Cut. Supplied in a pack of 5.
Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.Universal shank with 3 sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Fast, coarse cuts in hard and soft wood, plastics 5-60 mm (7/32Inch -2 3/8in).Length: 100mm.Pitch: 8 Fast Cut.Supplied in packs of 5.
