The Masterplug PRO-XT Open Cable Reel is lightweight and sturdy. This portable open reel is ideal for charging mobile devices whilst working. Designed and engineered for longevity, the plastic drum provides reliable protection when in use, transported or stored. This cable reel provides 2 shuttered sockets, 2 USB ports (2.1A shared), power switch, LED indicator, highly visible green cable and has a built-in safety thermal cut-out for protection against overloading when fully reeled. Specification: Voltage: 240VFully Unwound: 3120W (13A)Fully Wound: 720W (3A)Switch: Double PoleCable Length: 25mCable Size: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved
Irwin torx power bits are specially designed for the higher torque requirements of power tools. They are designed to provide more clearance between the power tool and the fastener.Pack of 5 Torx TX40 x 50mm long.
Flexovit drill mountable discs are made from high performance aluminium oxide drill mountable discs have a strong paper backing for maximum durability and can be used on a variety of surfaces. Use with FLV56833 backing pad, sold separately. Size: 125mm.1 x Pack of 10 Flexovit Drill Mountable Discs 125mm Coarse 50g
This Trend 1/2in Router Cutter Set has a range of Tungsten Carbide Tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 2 x Straight Cutters: 6.3 x 16, 12.7 x 25mm1 x V-Groove Cutter: 45° x 12.7mm2 x Guided Round Over: R6.35mm, R9.5mm1 x Guided Ogee: R4mm
The Irwin 618R Sabre Saw Blades have superior construction and design making them faster cutting and longer lasting. Cuts all metals including non ferrous, pipe conduit, stainless and sheet metal. Suitable for use with materials 1.5 to 10 mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade. Length: 150mm.Teeth: 18 tpi.
The Irwin 10 piece set of T-shank jigsaw blades for AEG, Bosch, DEWALT and Hitachi Jigsaws for metal and wood cutting are manufactured from high quality materials. Contain the following pieces: 2 x 10504221 (T111C) Wood cutting 100mm 8 tpi.2 x 10504218 (T144D) Wood cutting 100mm 6 tpi (fast cut).2 x 10504219 (T101B) Wood cutting 100mm 10 tpi.1 x 10504222 (T101D) Wood cutting 100mm 6 tpi (clean cut).2 x 10504220 (T118A) Metal cutting 92mm Progressive 17 - 23 tpi.1 x 10504225 (T118B) Metal cutting 92mm Progressive 11 - 13 tpi.
Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 120 Grit.
Masterplug Handy garden extension lead. 15 metre cable complete with storage handle. The highly visible orange cable reduces the chances of tripping over it or cutting it when outdoors.
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Metal Grinding Disc 100 x 6.5 x 16mm
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boardsUse bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mmSuitable for 13-18 mm boardsUse bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mmSuitable for 19 mm + boardUse bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mmShank = 1/4in
This Flexipads Wool Bonnet is made from ultimate Merino sheepskin wool, which has a unique double skin, making it very long lasting. It is a professional, world renown bonnet bought by Prestige Car Manufacturers. With GRIP® fastening. Made in Great Britain Specifications:Wool pile: 20mm.Max RPM: 2,500.This Flexipads GRIP® Wool Bonnet has the following specification: Size: 80mm.Matching Support Pad: FLE36300.
A set of 4 bushes to allow Faithfull bench grinding wheels to be fitted to various bench grinding machines. Sizes: 25.4mm, 19.05mm, 15.88mm and 12.7mm.
The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.Content:1mm Drill2mm Drill3mm Drill4mm Drill5mm Drill6mm Drill7mm DrillWith collets.
Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 80 Grit.
The Starrett 3 piece SDS Plus Chisel Set is used for demolition and stripping on both masonry and concrete materials. The precision ground chisel edge comes with a special hardening process for effective and efficient results. Suitable for both corded and cordless drills with hammer action. Contains the following: 1 x SDS Plus Pointed Chisel 250mm. 1 x SDS Plus Flast Chisel 20 x 250mm. 1 x SDS Plus Wide Chisel 40 x 250mm.
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Stone Cutting Disc 230 x 3.2 x 22.23mm
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 75 x 457mm 120g Fine
The Faithfull Multi-Sander Sheets are made from aluminium oxide E-weight heavy-duty paper with hook and loop quick change system. For use with Black and Decker Multi-Sander. Size: 106mm x 175mm.1 x Pack of 5 Faithfull Multi-Sander Sheets Hook & Loop Coarse Grit
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.Pack of 3 Faithfull Cloth Sanding Belt 610 x 100mm 80g
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 533 x 75mm 40g
Faithfull Magnetic Impact Nut Driver is specifically designed and for use in high torque impact drivers. The magnetic hex socket is ideal for repetitive jobs requiring the setting and removal of bolts and nuts. Manufactured from unique high-grade steel specially engineered for extreme durability and increased working life.This Faithfull Magnetic Impact Nut Driver (8mm) is commonly used for driving self-drilling screws (Tek Screws).
