The IRWIN Drill Screwdriving Set is supplied in a compact carry case and contains the following: 9 x Metal Drill Bits: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0mm. 4 x Masonry Drill Bits: 5, 6, 7, 8mm. 5 x Wood Drill Bits: 4, 5, 6, 7, 8mm. 30 x Screwdriver Bits. 3 x Nut Drivers: 8, 10, 13mm. 1 x Countersink. 1 x Magnetic Bit Holder.
These Faithfull Professional 1/4in Hexagon Drive Star Screwdriver Bits are manufactured from high strength, heat treated ‘S2’ grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: T25 x 25mm.Pack Size: 3.
The Flexipad Medium Density Pads are suitable for polishing and grinding, these will accept GRIP® and hook and loop backed sanding discs. The super polyurethane backing pad is made from impact resistant synthetic nylon which is bonded to microcellular polyurethane and with internal thread to suit sanders and polishers. Excellent resistance to initial and continuing tearing, oil and ageing. Made in Great Britain.Diameter: 200mm.Metal Centre threaded internally: M14 x 2.
The IRWIN® Mixed Screwdriving Set is supplied in a robust, compact storage case, designed to hold up against the rigours of daily use. Fitted with an easy-to-use flip-up latch design that keeps cases securely closed when not in use and locks the cases together when stacked. The connectable cases can be customised to create a single storage unit that is both secure and portable. Contains: 5 x 25mm Phillips Bits: PH1, PH2(x2) and PH3(x2).9 x 25mm Pozidriv Bits: PZ1, PZ2(x5) and PZ3x(3).7 x 25mm TORX Bits: TX10, TX15, TX20(x2), TX25(x2) and TX30.4 x 50mm Phillips Bits: PH1, PH2(x2) and PH3.6 x 50mm Pozidriv Bits: PZ1, PZ2(x4) and PZ3.6 x 50mm TORX Bits: TX15, TX20, TX25(x2) and TX30(x2).2 x Nut Setters: 8 and 10mm.1 x Magnetic Bit Holder.
The MEXCO Unslotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Unslotted Dry Core Drill X90 Grade 117mm
MEXCO VBX90 Grade Universal Diamond Blade. The VBX90 uses a process of vacuum brazing to attach large pieces of diamond grit to the cutting edge of a steel centre; this manufacturing process allows the diamond grit to be held constantly in contact with the material being cut producing very fast and effective stock removal. Suitable for dry and wet cutting.
1 x MEXCO VBX90 Grade Universal Diamond Blade 350 x 20mm
MEXCO VBX90 Grade Universal Diamond Blade. The VBX90 uses a process of vacuum brazing to attach large pieces of diamond grit to the cutting edge of a steel centre; this manufacturing process allows the diamond grit to be held constantly in contact with the material being cut producing very fast and effective stock removal. Suitable for dry and wet cutting.
1 x MEXCO VBX90 Grade Universal Diamond Blade 75 x 10mm
MEXCO VBX90 Grade Universal Diamond Blade. The VBX90 uses a process of vacuum brazing to attach large pieces of diamond grit to the cutting edge of a steel centre; this manufacturing process allows the diamond grit to be held constantly in contact with the material being cut producing very fast and effective stock removal. Suitable for dry and wet cutting.
1 x MEXCO VBX90 Grade Universal Diamond Blade 230 x 22mm
The MEXCO Solid Barrel Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Solid Barrel Dry Core Drill XCEL Grade 52mm
MEXCO VBX90 Grade Universal Diamond Blade. The VBX90 uses a process of vacuum brazing to attach large pieces of diamond grit to the cutting edge of a steel centre; this manufacturing process allows the diamond grit to be held constantly in contact with the material being cut producing very fast and effective stock removal. Suitable for dry and wet cutting.
1 x MEXCO VBX90 Grade Universal Diamond Blade 350 x 25.4mm
MEXCO UHXCEL+ Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for fast, clean cutting with reduced chipping. Suitable for ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials.With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors. Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL+ Ultra Hard Plus Diamond Blade 230 x 25.4mm
This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification: D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.
This DEWALT Multi-Material Drill Bit has the following specifications:Diameter: 6.5mm.Overall Length: 200mm.Working Length: 170mm.
This Trend 4/66 x 1/2 TCT Two Flute Cutter has the following specifications: D: 22mm. C: 25mm. OL: 66mm. Shank Diameter: 1/2in. The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. 22 x 25mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 63 mmD = 15.9 mm - 5/8in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 9.5 mm 3/8in
Senco DuraSpin® Collated Decking screws with a green Weatherex coating. Square No.2 drive, coarse thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Decking Screws with Weatherex coating. Size: 4.2 x 65mm.
Senco DuraSpin® Collated screws for Drywall to Heavy Steel applications. Phillips No.2 drive, clear zinc finish, fine-thread. 50 screws per strip. CE-marked (EN14592). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Heavy Steel. Size: 3.5 x 25mm.
The Faithfull Aluminium Wide Track Cutting Guide makes easy work of marking out and cutting sheet materials. Lightweight, rigid design for effortless handling. The easy-to-operate lever action jaws have large, soft grip clamping surfaces that securely lock on to the workpiece. The extra wide and thick reinforced aluminium profile offers increased durability over many other similar products. Two integrated T-slots accept M6 bolt heads to attach workshop accessories. The heat-treated zinc plated clamping bar and glassfibre reinforced nylon jaws ensure the clamp will have a long working life. Ideal for use with plywood, MDF, most other sheet materials, and for cutting doors and worktops to size. It can also be used as a clamp when gluing smaller panels together. They can be used as a guide for jigsaws, routers and circular saws, as well as marking pencils and knives. Available in two sizes with a surface clamping capacity of either 900mm (36in) or 1250mm (50in).1 x Faithfull Aluminium Wide Track Cutting Guide 1250mm (50in)
Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 21° Collation AngleProfile RING Finish G50 Description RH STICK 3.10-90 RING GAL-HD50 2M Qty per box 2000 Will Fit F21PL-E, N79RH-2
The Wiha Nut Driver & Bit Set, 40 Piece, can be used to simply carry out fastenings in a single step. All of the nut driver inserts are made from high quality chrome vanadium steel with a corrosion-resistant, easy to clean surface. Contains the following: 13 x 1/4in Hex Nut Driver Inserts: 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10, 11, 12, 13 & 14mm. 1 x 1/4in Switchable Ratchet Wrench 128mm. 2 x 1/4in Extensions: 75 & 150mm. 1 x 1/4in Universal Joint with Ball Internal Square/Square Head. 3 x 25mm Standard Slotted Bits: 4.5, 5.5 & 6.5mm. 2 x 25mm Standard Phillips Bits: PH1 & PH2. 3 x 25mm Standard Pozidriv Bits: PZ1, PZ2 & PZ3. 7 x 25mm Standard TORX Bits: T10, T15, T20, T25, T27, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x Magnetic CentroFix Force Bit Holder 60mm. 1 x Magnetic SoftFinishScrewdriver with Bit Holder 112mm. 1 x 1/4in Tool Shaft with Ball Square/Internal Hexagon. 1 x Multifunctional Bag with Belt Clip keeps all tools securely arranged. Easily hooks on to work trousers thanks to the high quality clip holder.
These round Flex sanding papers are ideal for grinding joint filler in drywall construction. When fitted on to a sander, they are ideal for processing large surfaces on walls and ceilings. The sheets are punched to enable dust extraction. They have Hook & Loop backing and are suitable for the following Flex models: GE 5 / GE 5 RGSE 5RWSE 7 Vario SetWSE 7 Vario PlusWST 700VVWST 700VV Plus.The FLX349232 Sanding Papers have the following specifications:Grit size: P180Grit type: Very fine.Diameter: 225mm.Pack size: 25.
Faithfull Aluminium oxide is bonded to a tough fibre backing giving an extremely durable disc with a wide variety of applications, particularly metalworking. Designed primarily for use on angle grinders which must be fitted with a suitable backing pad. Diameter: 115mm.Bore: 22mm.Grit: 120.
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.The DEWALT DEWDT2169QZ HCS jigsaw blades are engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics. The blades are made from high carbon steel for increased durability with a T shank fitting for all T-shank Jigsaws. The swiss made jigsaw blade is ideal for fast, straight cuts in wood and chipboard up to 100mm thick. The DEWALT DEWDT2169QZ jigsaw blade has the following specifications:Overall Length: 152mmWorking Length: 116mmTooth Pitch: 4mmMax DOC: 100mmEquivalent Bosch Ref: T344DPack Quantity: 5.
Senco DuraSpin® Collated Decking screws with a green Weatherex coating. Square No.2 drive, coarse thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Decking Screws with Weatherex coating. Size: 4.5 x 75mm.
The Freud Multi-Material Saw Blade for horizontal panel sizing machines. Its Silver I.C.E.® (Industrial Cooling Element) Coating leaves a slick surface on the blade body that reduces heat and drag, enabling the blade to last longer. Designed for industrial panel sizing, single or multiple panels. Suitable for laminated chipboard and MDF, thermoplastic composites, HPL and Plexiglas.
This Freud Multi-Material Circular Saw Blade has the following specifications:Blade Diameter: 600mmBore Diameter: 75mmKerf: 5.8mmTooth Count: 60
The Freud Multi-Material Saw Blade for horizontal panel sizing machines. Its Silver I.C.E.® (Industrial Cooling Element) Coating leaves a slick surface on the blade body that reduces heat and drag, enabling the blade to last longer. Designed for industrial panel sizing, single or multiple panels. Suitable for laminated chipboard and MDF, thermoplastic composites, HPL and Plexiglas.
This Freud Multi-Material Circular Saw Blade has the following specifications:Blade Diameter: 450mmBore Diameter: 60mmKerf: 4.8mmTooth Count: 72
Flex Power Tools BS 50 Burnishing Sanding Attachment for TRINOXFLEX. Easy to fit thanks to tool-free fitting via quick-change system. It has a integrated grip hood for burnishing.
MEXCO Concrete Looping Diamond Blades are specifically designed to produce pre-determined width slots in concrete to insert detector loops. For use on Floor Saws only.
1 x MEXCO Concrete Looping Diamond Blade 350 x 25.4mm x 10mm Width
Flex Power Tools BF 140 File Sanding Attachment for TRINOXFLEX. Easy to fit thanks to tool-free fitting via quick-change system. Includes 9 and 30mm sanding arms, side handle and ZIRCOFLEX sanding belt set 9mm.Suitable for: BME 18.0-EC, BME 18.0-EC C, BRE 50 18-EC C-Set, BSE 50 18-EC C-Set and FBE 30 18-EC C-Set.
The MEXCO Unslotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Unslotted Dry Core Drill X90 Grade 22mm
The Trend Door Stand holds door on its edge while routing hinge recess and mortice for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to be tilted back to assist fitting into frame. Maximum door weight 50kg.
Evolution Pressurised Water Bottle for effective dust suppression on any job site. With a robust hand pump for quick and easy water pressure plus a 3m anti-kink water hose with universal hose connector. The large hand pump can be used while wearing gloves and can also be locked down to double up as a carry handle for portability. Its large capacity means less filling and more cutting. An essential accessory to conform to dust suppression regulations. Specification Capacity: 15 litreHose Length: 3mWeight (Empty/Full) 2.5/17.6kg
