This Masterplug Switched Extension Lead has a rounded slimline appearance and offers exceptional value. It allows you to control each socket with an individual switch. It also features wall-fixing slots and a power indicator. Specification: Number of Gangs: 4Cable Length: 2mFuse: 13 ampColour: WhiteVoltage: 240V
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup Maximum speed: 12,000/min.The FAIWBSI50 Wire Brsh has the following specifications: Face diameter: 50 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.
Zenith unstitched mop for use with polishing compounds, eg. pink GBA/90WP compound or blue GBA/12B compound.Zenith profin unstitched calico mop for use with pink GBA/09WP compound, or blue GBA/09WP compound. Size: 4in x 50 Fold.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 10mmC - Cutting Length - 19.1mmT.C.T.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inSuitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. D1 1/2 inch D1 12.7 mm Cut length 2 inches Cut length 50 mm Shank Diameter 1/2 inch
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 80 x 30mmGrade Fine (120 Grit)
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 60 x 40mmGrade Coarse (60 Grit)
The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 165mmBlade Bore: 20mmTooth Count: 24Plate Thickness: 1.0mmKerf Thickness: 1.65mmGrind Type: ATBRake Angle: +24°
The Flexipads Dual Action Sander Pad is a premium quality pad with an extra tough fibreglass backplate. It features a range of side vents and cross section channels, for increased air flow for cooling and dust collection. Ideal for heavier grinding. Specifications: Diameter: 150mm.Surface: Hook and loop.Type: Multi-hole E80/65/120.Thread: 5/16 UNF + M8.Density: Medium.Max RPM: 12,000. Made in Great Britain
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work Don't use Depressed Centre cutting discs as grinding wheels1 x Faithfull Depressed Centre Metal Cutting Disc 230 x 3.2 x 22.23mm
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size: 50 x 20mm.Grit: Medium.
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size. 60 x 30mm.Grit: Coarse.
Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 40 Grit.
Zenith False noses can be used on bench grinders to convert them for use with all types of polishing mops. Available for machines with 6, 12 or 16mm spindles.Zenith Profin Taper Spindle Left Handed. Size: 16mm.
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc 230 x 3.2 x 22.23mm
Zenith False noses can be used on bench grinders to convert them for use with all types of polishing mops. Available for machines with 6, 12 or 16mm spindles.Zenith Profin Taper Spindle (drill Mounted) pigtails are used in hand held power drills when using polishing mops and have a 6mm spindle chuck mounting.
Faithfull recess cutters are designed for use in conjunction with a Faithfull tungsten carbide tipped circular cutter (FAISDSBOXCUT) to form recesses for electrical back boxes. The cutter box should be used with hammer action only and rotation stop must be engaged. These products are only suitable for small 2kg SDS Plus machines with a ‘Roto Stop’ feature (not suitable for 5kg machines).This square cutter is designed to form single electrical back boxes. Size: 77 x 77mm.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/2in ShankCutting Diameter: 25.4 mm 1in. Cutting Length 25 mm Shank Diameter: 1/2in.
This BlueSpot 85 piece Cut-Off Wheel Accessory Set comprises the following: 2 x 1.1/4in Reinforced cut-off wheels.6 x 1.1/4in Fibreglass-reinforced cut-off wheels.2 x 1/8in Mandrels.40 x 15/16in Emery cut-off wheels.35 x 15/16in Cut-off wheels.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 100 x 16 x 80g. Fine.
The bits in this Metabo 56 Piece Bit Set are made from Chrome Vanadium Steel (S2-Quality), and are colour ring coded for quick and easy identification. Supplied in a high quality, robust storage box with unique Metabo design. Also has an extendable toolbar hanger. Contains: 9 x 25mm Phillips Bits: PH1(3), PH2(3) & PH3(3).9 x 25mm Pozi Bits: PZ1(3), PZ2(3) & PZ3(3).6 x 25mm Slotted Bits: SL4(2), SL5(2) & SL6(2).3 x 25mm Hex Bits: H3, H4 & H5.14 x 25mm Torx Bits: TX10(2), TX15(2), TX20(2), TX25(2), TX27(2), TX30(2) & TX40(2).7 x 25mm Torx Bits: TX10, TX15, TX20, TX25, TX27, TX30 & TX40. 2 x 75mm Phillips Bits: PH2 & PH3.2 x 75mm Pozi Bits: PZ1 & PZ2.1 x 75mm Slotted Bit: SL6.2 x 25mm Torx Bits: TX20 & TX25. 1 x Magnetic Quick-Change Bit Holder.
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blade excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.Blade Diameter: 230mmBore Size: 22.2mmSegment Height: 10mm.
The 32 Piece Bosch Professional Extra Hard Screwdriver Set, ideal for general screwdriving work with screwdrivers and drill drivers. The bits are color-coded for a quick overview and identification of the right bit type.Supplied in a practical box with a transparent lid and a belt clip. Contains:4 x 25mm Phillips Bits: PH1, PH2(x2), PH34 x 25mm Pozidriv Bits: PZ1, PZ2(x2), PZ34 x 25mm Slotted Bits: 3mm, 4mm, 5mm, 6mm8 x 25mm TORX Bits: T10, T15, T20(x2), T25, T27, T30, T407 x 25mm Security TORX Bits: TH10, TH15, TH20, TH25, TH27, TH30, TH404 x 25mm Hex Bits: 3mm, 4mm, 5mm, 6mm1 x Quick-change Universal Magnetic Holder
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.
This Pack of 3 Faithfull Aluminium Oxide Flap Discs contains the following:1 x Aluminium Oxide Flap Disc 125 x 22mm 40 Grit1 x Aluminium Oxide Flap Disc 125 x 22mm 80 Grit1 x Aluminium Oxide Flap Disc 125 x 22mm 120 Grit40 grit is suitable for rough grinding and finishing of mild steel, carbon steel and alloys.80 grit is suitable for final grinding of mild steel, carbon steel and alloys.120 grit is suitable for smooth grinding of mild steel, carbon steel and alloys.
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.
This Pack of 3 Faithfull Zirconia Abrasive Jumbo Flap Discs contains the following:1 x Zirconia Abrasive Jumbo Flap Disc 115 x 22mm 40 Grit1 x Zirconia Abrasive Jumbo Flap Disc 115 x 22mm 80 Grit1 x Zirconia Abrasive Jumbo Flap Disc 115 x 22mm 120 Grit40 grit is suitable for for rough grinding.80 grit is suitable for final grinding.120 grit is suitable for smooth grinding.
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.
Pack of 3 Faithfull Zirconia Abrasive Jumbo Flap Discs 115 x 22mm 40 Grit.The Faithfull 40 Grit Zirconia Abrasive Jumbo Flap Disc is suitable for rough grinding. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces.For use with a 115mm angle grinder.Max. Speed: 80m/s 13300 RPM.
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.
Pack of 3 Faithfull Zirconia Abrasive Jumbo Flap Discs 115 x 22mm 120 Grit.The Faithfull 120 Grit Zirconia Abrasive Jumbo Flap Disc is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces.For use with a 115mm angle grinder.Max. Speed: 80m/s 13,300 RPM.
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.
Pack of 3 Faithfull Zirconia Abrasive Jumbo Flap Discs 115 x 22mm 80 GritThe Faithfull 80 Grit Zirconia Abrasive Jumbo Flap Disc is suitable for final grinding. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces.For use with a 115mm angle grinder.Max. Speed: 80m/s 13300 RPM.
The DEWALT DXVA19-1300 Crevice Tool is perfect for getting into narrow spaces, hard-to-reach corners and awkward crevices. Compatible with 48mm (1.7/8in) vacuum hoses.
IRWIN 25 Piece Multi Material and Screwdriving Set is supplied in a compact carry case and contains the following: 4 x 25mm Phillips Bits: PH1, PH2x2, PH3. 4 x 25mm Pozi Bits: PZ1, PZ2x2, PZ3. 3 x 25mm TORX Bits: T20, T25, T30. 3 x Slotted Bits: 6mm, 8mm, 10mm. 1 x 50mm Phillips Bit:PH2. 1 x 50mm Pozi Bit: PZ2. 2 x x 50mm TORX Bits:T20, T30. 6 x Multi Material Drill Bits:4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm. 1 x Magnetic Bit Holder.
IRWIN 1/3 Punched Sanding Sheets with Velcro attachment, reduced space between the sanding sheet and the machine allows for higher removal rate. Perforation allows for more efficent dust extraction. Suitable for BLACK + DECKER. Specifications: Size: 93 x 190mm.Grits: 2 x K80, 2 x K120 and 1 x K240.
Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and are resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces. 1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA120 115mm. 120 grit is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15–25-degree angles on contoured surfaces. For use with a 115mm angle grinder. Max. Speed: 80m/s 13,300 RPM.
IRWIN Impact Pro Performance Screwdriver Bits have been engineered for maximum durability and turning force when used in extreme applications. The full-fit head eliminates wobble and screw head roundings. With a contoured area, so the bit tip flexes with the torque of the impact driver. Flex optimised to transfer maximum torque through the screw and maximise life. Supplied in a robust, storage case. Contains: 4 x 25mm PH/TORX Bits: PH2/T2.4 x 25mm Pozi Bits: PZ2.1 x Bit Holder.
