The DEWALT DT1964 Construction Circular Saw Blades have been designed for use with stationary machines to cut softwoods and composite materials. Their fast, smooth cutting action and durable construction make them ideal for demanding onsite operations. The wedge shoulder design protects the carbide from nail impact. The 3 Piece DT1964 Construction Circular Saw Blade Pack contains the following: 1 x Construction Circular Saw Blade 305 x 30mm x 24T. Plate Thickness: 2.0mm.Kerf Thickness: 3.0mm.Grind Type: ATBRake Angle: -5°. 1 x Construction Circular Saw Blade 305 x 30mm x 48T. Plate Thickness: 2.0mm.Kerf Thickness: 3.0mm.Grind Type: ATBRake Angle: +10. 1 x Construction Circular Saw Blade 305 x 30mm x 60T. Plate Thickness: 2.0mm.Kerf Thickness: 3.0mm.Grind Type: ATBRake Angle: -5°.
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerFinish: Bright.Size: 2.3 x 50mm.Pack quantity: 13,200.
Irwin magnetic bit holders are specially designed for the higher torque requirements of power tools. They are designed to provide more clearance between the power tool and the fastener. Size: 1/4 in x 50mm.
The DEWALT Dry Diamond Blade for dry cutting general masonry materials, such as brick, building blocks, paving blocks concrete. Universal fit for ALL brands of angle grinders. For use with corded and cordless grinders. Specifications: Diameter x Bore: 115 x 22.23mm.Thickness: 2.1mm.Pack Size: 2.
The DEWALT DT70757 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x HSS-G Extreme Drill Bits: 3, 4, 5, 6, 8, 10, 12mm 2 x Flat Bits: 14, 20mm 4 x 25mm Phillips Bits: PH1(x2), PH2(x2)27 x 25mm Pozidriv Bits: PZ2(x25), PZ3(x2) 10 x 25mm TORX Bits: TX10(x3), TX20(x3), TX25(x2), TX30(x2)2 x 25mm Slotted Bits: 6, 8mm 1 x Nut Driver: 8mm 2 x Adaptors: 1/4in Hex to 1/4in Square, 1/4in to 3/8in
The DEWALT Series 40 Extra Fine Finish Circular Saw Blade is designed for use in stationary saws. With large, general purpose K10 carbide tips for cutting wood and non-ferrous metals. They can be resharpened up to 15 times. High precision laser manufacture ensures a flat blade body and engineered expansion slots prevent blade overheating and warping. These blades are designed with triple chip grind geometry which gives an excellent surface finish on the workpiece.This DEWALT Series 40 Circular Saw Blade has the following specification: Finish: Extra Fine.Blade Diameter: 305mm.Blade Bore: 30mm.Tooth Count: 80.Plate Thickness: 2.2mm.Kerf Thickness: 3.0mm.Grind Type: TCGN.Rake Angle: -5°.
The DEWALT Impact Torsion Torx Bits have a 15° torsion zone that allows the screw driver bit to flex rather than break and a full fit head prevents the rounding of the screw head and prevents 'cam out' (bit head slipping out of screw head due to the turning force). The magnetic screwlock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied in a pack of 5.DEWALT Impact Torsion Bits TX25 25mm Pack of 5
The DEWALT Impact Torsion Phillips Bits have a 15° torsion zone that allows the screw driver bit to flex rather than break and a full fit head prevents the rounding of the screw head and prevents 'cam out' (bit head slipping out of screw head due to the turning force). The magnetic screwlock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied in a pack of 5.DEWALT Impact Torsion Bits PH3 50mm Pack of 5
The DEWALT 2X Life Reciprocating Saw Blade 6 Piece Set contains a mixture of blade types for a wide range of cutting jobs and is supplied in a hassle-free, re-usable storage case that quickly and easily adjusts to suit the blade lengths. They have superior HSS (high speed steel) teeth with added Cobalt for harder, stronger teeth with greater flex for excellent cutting performance and long life even in the most demanding applications. Fast and accurate cutting in wood applications thanks to the Plunge Point tip technology which pierces the wood and removes more material. They have an optimised blade design offering increased height and thickness for sturdiness, strength and extreme durability. The ToughCoat hardened coating lowers surface friction and reduces heat build up to promote long blade life. They have an aggressive shank angle that increases tooth engagement in all materials and extends blade life. The Metal blades have an optimised tooth design with a 14/18 tpi variable tooth geometry reduces tooth breakage in hard metals for extreme durability even in the most demanding applications. Contains: 1 x DT2307L 2X Life Wood & Nail Reciprocating Blade 228mm, 6 TPI.1 x DT2308L 2X Life General Purpose Reciprocating Blade, 10 TPI.1 x DT2300L 2X Life Wood & Nail Reciprocating Blade 152mm, 6 TPI.1 x DT2301L 2X Life General Purpose Reciprocating Blade 152mm, 10 TPI.1 x DT2407L 2X Life Metal Reciprocating Blade 152mm, 14/18 TPI.1 x DT2315L 2X Life General Purpose Reciprocating Blade 100mm, 10 TPI.
The Faithfull SK7 Wavy Edge Insulation Cutter Blade is perfect for making fast, precise and deep cuts. It is specially designed for cutting insulation board, but can also be used on foam and other soft materials. Manufactured from high-carbon SK7 steel for a long life. Compatible with many multi-function, oscillating power tools. Specification: Cutting Length: 100mmWidth: 8-28mmMaterial: SK7 blued steel
DEWALT DT20734 Fastcut Wide Wood Multi-tool Blade. Suitable for a wide range of cutting applications, including wood, plasterboard and PVC. UNIVERSAL FITMENT™ for adaptor-free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Specifications: Width: 65mm.Length: 43mm.
The Stanley range of Torx headed bits are supplied in packs of 3 or 25. They are 25mm long screwdriver bits in a large range of sizes: T10, T15, T20, T25, T30 and T40. All the Stanley torx bits are 1/4-inch hex, are precision machined for the perfect fit and are forged and ground for long life and durability. Suitable for use in industrial, construction, DIY, motor trade, or security applications.Tip size: T25 Torx.Length. 25mm x 1/4-inch hex. Box of 25.
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 610 x 100mm 80g Medium
Flexovit 1/2 sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, they are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 115 x 280mm.Packed in 10s
For use with GRIP® fastening backed sanding discs, sponge backed with 6 mm spindle. Ideal for curved surfaces. Made in Great BritainType. 25-SP10-VEL.Size. 25 mm.
Spindle pad. GRIP® fastening for variable speed power drills. Fits most drill chucks and flexidrives. Type: GRIP®. Shank: 6 mm. Max: 20,000. Made in Great BritainSize: 75mm
SMJ's range of Extension Leads that are ideal for indoor use and provide power where you need it. Fitted with a 13 Amp plug, they have a maximum working load of 3,120 Watt. Designed to fully comply with the latest British Standards and Electrical Equipment Safety Regulations. Available as 1-way, 2-way, 4-way and 6-way.Current: 13 amp.SMJ B1W5MP Extension Lead
The Dormer P807 Solid Carbide Bright Rotary Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With a improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball has the following specification: Diameter: 16mm.Shank Diameter: 6mm.Working Length: 14mm.Overall Length: 59mm.
This Faithfull inspection lamp features a 50mm wide clamp for clamping to joists, beams, under vehicle bonnets, lofts or almost anywhere. It has strong hand grips, a useful hanging hook for easy storage, and a protective wire cage around the bulb. Supplied with a 5 metre cable, approved plug, and an 800 lumen low energy 10W LED light bulb (equivalent to 60 watt incandescent lightbulb). Replacement bulb part number:FPPSLBA6010W - 10W LED E27The Faithfull FPPSLGRIPLE heavy-duty low energy inspection lamp has the following specifications:240 Volt
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2207-QZ (T101BR) XPC HCS Wood Jigsaw Blades provide clean splinter free cuts in wood, chipboard, plywood and laminate.
