The Faithfull Heavy-Duty Tripod is constructed from powder-coated metal for durability. There is a cable storage function on the tripod leg. A twin T-bar attachment is also available (FPPTRIKIT1) allowing 2 light units to be used with the tripod. Specification: Max. Height: 3mMin. Height: 1.2mTop Attachment Diameter: 34mm
The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. The jig has the following features: Left and right hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Engraved lines for 65mm bolts and worktop cross-cut. 6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.The KWJ700 has fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm worktops. Length: 985mm.Width: 390mm.Thickness: 12 mm.Weight: 5.4 kg.End Cut: 45°.Corner Radii: 40mm, 100mm and 400mm.Corner Mitre Joint: 45°.Female cut material width loss: 35 mm.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 12mmD = 19mm
PRIMA plain bearing chucks are widely used for hand operated percussion drilling machines. Smaller and intermediate sizes. Industrial quality chuck with fully hardened and ground working components which offers exceptionally high accuracy , gripping power and durability.13mm Cap - 1/2 x 20 Female
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3105 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 120.Pack quantity: 5.
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.These DEWALT DT2168 (T101AO) Scroller Blades are ideal for fine, curve cutting in wood, chipboard, plywood, laminated chipboard & plastic up to 30mm thick.
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.The DEWALT DT2074 (T142HB) HCS Wood Jigsaw Blade for straight fine cuts in wood, cuts flush to 180° surface. Ideal for skirting boards.
The DEWALT Sanding belts have a heavy-duty backing cloth, resin bonded for use with belt sanders. They provide excellent grain adhesion and heat resistance for power sanding and have a high quality aluminium oxide grain for fast, aggressive stock removal and fine finishing. Anti static bond and backing ensures more efficient dust extraction, improved finish and longer life. Applications: for all stripping, sanding and finishing tasks on wood, metal and painted surfaces.Pack of 3 DEWALT Sanding Belts 356 x 64mm 80g
The DEWALT Impact Torsion Pozi Bits have a 15° torsion zone that allows the screwdriver bit to flex rather than break, and the full fit head prevents rounding of the screw head and prevents 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied in packs of 2, 5 or 15.1 x DEWALT Impact Torsion Bits PZ2 85mm Pack of 2
The Irwin General Purpose Table & Mitre Saw Blade with construction grade tungsten carbide tips that retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Table & Mitre Saw Blade has the following specifications: Blade Diameter: 400mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 3.5mm.Tooth Config: ATB.Machine: Table & Mitre.
DEWALT Mesh Sanding Sheets last at least 4 times longer than traditional DEWALT sandpaper sheets. Fibres are drawn away from the surface of the sheet into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. The sanding sheets enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding sheets. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding sheets have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3025 1/4 Mesh Sanding Sheets have the following specifications:Size: 115 x 115mm.Grit: 240.Pack quantity: 5.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 65 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 65 mm.Pack : Box of 2500.
Hook & Loop backed perforated sanding discs, which suit the following models: GE 5 / GE 5 R, GSE 5R, WSE 7 Vario Set, WSE 7 Vario Plus, WST 700 VV and WST 700 VV Plus. Size: 225mm.FLX280739 sanding discs have the following specifications:Grit size: P40Application: For levelling coarse surface irregularities.Diameter: 225mm
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA120 125mm. 120 grit is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.
DEWALT Extreme Metal Flap Discs for grinding and removal tasks on surfaces with an angle up to 15 degree. Designed to remove rust, will grind and clean ferrous metals. Made with tough and durable zirconia grain.1 x DEWALT DT30602 Extreme Metal Flap Disc 125 x 22.2mm x 40G.
Bosch RA 32 Professional 32mm Hole Layout Attachment for routers, delivers CNC machine-quality results. It is intended for use with FSN OFA router adapters for creating professional 32mm hole spacing layouts in furniture-related applications.
Bosch OFZ Professional Attachment for exact guidance during circular routing. This dual-rod guide ensures a stable connection between router and accessories. Round steel handles with 8mm or 10mm radius.
Bosch KS 3000 FSN SA Professional Attachmentwith measuring tape and adaptor, enables precise circle cuts for jigsaws. After the measuring tape is fixed in place, its rigid metal band acts as a radius, swivelling around the centre point to guarantee accurate circle cuts in a wide range for diameters from 120-3,000mm. In addition, the set includes the FSN SA adapter which also supports straight cuts and contains the Bosch T 344 DP Precision for Wood jigsaw blade. Compatible with: GST 160 Professional, GST 1400 Professional, GST 18V-LI Professional, GST 18V-LI S Professional, GST 18V-LI B Professional, GST 18V-155 Professional and GST 18V-125 Professional jigsaws.
Bosch GTA 6000 Professional Saw Stand for GTS 10 XC Professional Table Saw. Easy to store, quick to set up, and simple to transport for convenient work on the go. It has a lockable folding mechanism for increased safety during use. Specifications: Length of Work Bench: 750mm.Height of Work Bench: 602mm.Dimensions of Folded Table: 735 x 865 x 170mm.
Bosch GTA 60 W Professional Table Saw Stand with Bosch gravity-rise for rapid set up and breakdown. Switching between work and transport modes is easy by simply lifting the stand's lever. Integrated wheels allows for quick transportation, even whilst the saw is mounted. Supports all Bosch Professional Table Saws. Specifications: Length of Work Bench: 1,220mm.Height of Work Bench: 622mm.Dimensions of Folded Table: 1,220 x 740 x 510mm.
