The Masterplug PRO-XT Case Cable Reel provides a compact, portable solution with an innovative design. Fixing points in the base allow the reel to be mounted for storage or while in use. The reel features 4 shuttered sockets, LED power indicator and the double pole switch allows you to control the power where you are working. This case reel is perfect for home, garden or workshop use and is ideal for DIY. For your additional safety, a thermal cut-out is integrated into the reel and cuts the power if the reel becomes warm due to overloading when reeled. Specification: Voltage: 240VFully Unwound: 3120W (13A)Fully Wound: 720W (3A)Switch: Double PoleCable Length: 15mCable Size: 1.25mm (H05VV-F)Standards: BS EN 61242. ASTA Approved
The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating, ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc. 1 x IRWIN Bi-Metal High Speed Holesaw 56mm.
This Lessmann Threaded Tube Brush has the following specification: Wire: SteelThread: 1/2in ExternalDiameter: 30mmFilling Length: 100mmOverall Length: 160mm
This Lessmann Knotted Wheel Brush has the following specification: Wire Type: SteelWire Gauge: 0.50Diameter: 75mmWidth: 9mmShank: 6mmMax Speed: 20,000/rpm
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diameter.40mm.Width. 10mm.Wire Height. 15mm.Wire Gauge.0.30Wire Type. Steel.Max. R. P. M. 15,000
The Starrett TCT Stainless Steel Holesaws are ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than is possible with a bi-metal holesaw. Tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf. They have a solid one-piece construction, with complete assembly including arbor and pilot drill. A split-point drill bit allows for faster penetration and self-centring helping keep the drill on target and to prevent wandering. Fitted with ejector spring for easy core removal. Ideal for production cutting, and particularly suitable for use in drills with limited speed control. Recommended for cutting sheet metal up to 3mm (1/8in) thick.
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerFinish: Bright.Size: 2.3 x 55mm.Box quantity: 13,200.
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boardsUse bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mmSuitable for 13-18 mm boardsUse bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mmSuitable for 19 mm + boardUse bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mmShank = 1/2in
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.
The BlueSpot Tools Bi-Metal Reciprocating Saw Blades are manufactured from bi-metal for increased strength and durability. Designed for exceptional cutting performance for cutting metal sheets, pipes and profiles up to 10mm thick. For use with a reciprocating saw. Similar to IRW10506426 blades. Specifications: Length: 240mm.TPI: 5.Cutting Capacity: 10mm.
The Makita B-33386 Specialized for Aluminium Cutting Blade has the following specifications: Blade Diameter: 260mm.Bore: 30mm.Kerf: 2.8mm.Rake: 0º.Thickness: 2.2mm.Tooth Count: 80.
The Paslode F18 ELECTROGALV Brad Nails provide a discreet, fine finish. The small head size minimises any adverse decorative effect. With a chisel point to help prevent wood splitting. For use with the IM50 machine. Specification: Usage: Indoor, service class 1Nail Surface Treatment: Electro Galvanised <3 µmDiameter Wire: 1.2mmNails Per Strip: 50 These Paslode F18 ELECTROGALV 3µm Brads have the following specification: Size: F18 x 32mmPack Size: 2,000Number of Fuel Cells: 2
Flexipads 17096 Dual action orbital sander pad, 150 mm (6in) face to suit dust extraction machines. Medium density with 12mm foam layer. Perfect for Abranet and other 51 hole discs. Hole: 51 HoleType: ABRANETSize: 150 mm (6in)Thread: 5/16 UNFMax RPM: 10000 Made in Great Britain.
The Flex MH-O D225 Round Sanding Head is suitable for finishing large surfaces on walls and ceilings. It offers effective dust extraction and a high surface removal rate. Compatible with the following Flex models: GE 7 & MH-O, GE MH 18.0-EC, GCE 6-EC, GCE 6-EC Kit and GCE 6-EC Kit MH-R.
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 915 x 100mm 120g
This Stanley Magnetic Bit Holder has been precision machined. The magnetic recess holds 1/4in insert bits securely when in use. Sold singularly or as a box of 5 bits. Length: 60mmBox of 5 Stanley Magnetic Bit Holder 1/4 Hex Bits
Replacement sanding discs for use with Vitrex Long Reach Sander LRS700. Easy to replace, hook and loop attachment.1 x Pack of 10 Vitrex Long Reach Sander Discs 150G
These Faithfull SDS-plus Chisel Bits are made from drop forged Chrome Molybdenum with a heat treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiseling, stripping plaster, mortar chasing, channeling and breaking through brickwork.1 x Faithfull SDS-plus Chisel Point 250mm
DEWALT Extreme Metal Flap Discs for grinding and removal tasks on surfaces with an angle up to 15 degree. Designed to remove rust, will grind and clean ferrous metals. Made with tough and durable zirconia grain.1 x DEWALT DT30612 Extreme Metal Flap Disc 125 x 22.2mm x 60G.
