These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Size: No.2 Pozidrive.Length: 50m x 1/4-inch hex.Box of 10.
The Faithfull Router Bit TCT 45° Chamfer is a bearing guided tungsten carbide tipped cutter producing a 45° chamfer to a maximum depth of 10mm. Suitable for use on softwood, hardwood and all man-made boards. 1/4in Shank
The SMJ White Rubber Trailing Extension Socket conforms to the latest standards of BS 1363/A for heavy use and is rated at 13 amp. It is also fitted with a cable clamp.SMJ White Rubber Trailing Extension Socket 2 Gang.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 75 28° Collation AngleSKU S280R75 Profile RING Finish BRIGHT Description STICK NAIL 2.80-75 RING 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S
The Masterplug MSTARCDKGMP RCD Safety Adaptor Plug simply plugs into the mains, then you plug your electrical appliance into it. If there is a fault or a short in the tool you are using, the unit cuts the power very quickly, reducing the risk of electrocution. The Masterplug Safety RCD Adapter continuously monitors the power supply to an electrical appliance and cuts off the power within 40 milliseconds if an earth current fault is detected. This is fast enough to prevent a fatal electric shock. The Masterplug RCD Safety Adaptor Plug is an ideal way to protect yourself when using portable electrical tools, like lawnmowers, hedge trimmers and mains powered drills. Electrical appliances can become dangerous if the wiring becomes loose, or their power cords become damaged or if they get wet. Not only power tools and lawnmowers can cause electrocution is also possible if fingers, wet hair or other conductive bodies enter the appliance. In all these cases the Masterplug Safety RCD is a must. Not suitable for pond pumps and other pond equipment as when these are removed the installation is unprotected. Safety RCD (Circuit Breaker)Can be used with any 240v appliance.Particularly recommended for use with power tools.
The BlueSpot Tools Bi-Metal Reciprocating Saw Blades are manufactured from bi-metal for increased strength and durability. Designed for exceptional cutting performance for cutting metal sheets, pipes and profiles up to 10mm thick. For use with a reciprocating saw. Similar to IRW10506426 blades. Specifications: Length: 240mm.TPI: 5.Cutting Capacity: 10mm.
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 610 x 100mm 40g
The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 136mmBore Size: 10mmTooth Count: 16Tooth Config: ATBKerf: 1.66mmHook Angle: +20°
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3107 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 240.Pack quantity: 5.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX12Z 18G Galvanised Staples 12mm
The DEWALT Multi-Tool Detail Blade is specifically designed for detail work. It has 16TPI for fine cutting in wood. The blade is quick and easy to change and fits all common oscillating tools. Suitable for the following materials: Wood.Drywall.PVC. Specifications: Blade length: 43mm.Blade width: 10mm.
DEWALT EXTREME FlexTORQ Bits are designed to withstand the high forces of today's impact drivers. This significantly reduces the instances of failure when fixing large screws in place. Precision machined tip geometry provides full fitment in the fastener, reduced cam-out, and longer life. The full fit head eliminates wobble and screw head rounding. Laser etched size ID allows for quick and easy bit selection.1 x DEWALT EXTREME FlexTORQ Bit PH2 x 152mm
The DEWALT Series 40 Extra Fine Finish Circular Saw Blade is designed for use in stationary saws. With large, general purpose K10 carbide tips for cutting wood and non-ferrous metals. They can be resharpened up to 15 times. High precision laser manufacture ensures a flat blade body and engineered expansion slots prevent blade overheating and warping. These blades are designed with triple chip grind geometry which gives an excellent surface finish on the workpiece.This DEWALT Series 40 Circular Saw Blade has the following specification: Finish: Extra Fine.Blade Diameter: 250mm.Blade Bore: 30mm.Tooth Count: 80.Plate Thickness: 3.0mm.Kerf Thickness: 2.2mm.Grind Type: TCGN.Rake Angle: -5°.
The DEWALT DT70518 Extreme Impact Torsion Bit Set contains a selection of IMPACT READY® accessories that deliver exceptional performance in extreme torque applications. FlexTorq® bits feature an Extended FlexTorq® Zone to transfer optimal torque in hard joint applications, providing durability and longer life. The bit tip is CNC machined for a precise fit, reducing cam-out under torque. Contents: 2 x 25mm FlexTorq® Phillips Bits: PH2(2)4 x 25mm FlexTorq® Pozi Bits: PZ2(2) & PZ3(2)2 x 25mm FlexTorq® TORX Bits: T15 & T301 x 25mm FlexTorq® Slotted Bits: SL61 x Magnetic Pivoting Bit Tip Holder
The DEWALT Multi-Tool Carbide Rasp has an extremely abrasive sanding surface for smoothing very hard and uneven surfaces. It has a 'Tough Grit' carbide edge for fast and effective removal of adhesives, lacquers and sealants. The blade is quick and easy to change and fits all common oscillating tools. It is ideal for the removal of hard tile adhesives.
These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 32mm
The DEWALT Multi-Tool Rigid Scraper Blade is ideal for surface removal of a wide range of materials. The blade is quick and easy to change and fits all common oscillating tools. Suitable for scraping the following materials:Adhesives.Lacquers.Sealants.
The DEWALT 2X Life Reciprocating Saw Blade 6 Piece Set contains a mixture of blade types for a wide range of cutting jobs and is supplied in a hassle-free, re-usable storage case that quickly and easily adjusts to suit the blade lengths. They have superior HSS (high speed steel) teeth with added Cobalt for harder, stronger teeth with greater flex for excellent cutting performance and long life even in the most demanding applications. Fast and accurate cutting in wood applications thanks to the Plunge Point tip technology which pierces the wood and removes more material. They have an optimised blade design offering increased height and thickness for sturdiness, strength and extreme durability. The ToughCoat hardened coating lowers surface friction and reduces heat build up to promote long blade life. They have an aggressive shank angle that increases tooth engagement in all materials and extends blade life. The Metal blades have an optimised tooth design with a 14/18 tpi variable tooth geometry reduces tooth breakage in hard metals for extreme durability even in the most demanding applications. Contains: 1 x DT2307L 2X Life Wood & Nail Reciprocating Blade 228mm, 6 TPI.1 x DT2308L 2X Life General Purpose Reciprocating Blade, 10 TPI.1 x DT2300L 2X Life Wood & Nail Reciprocating Blade 152mm, 6 TPI.1 x DT2301L 2X Life General Purpose Reciprocating Blade 152mm, 10 TPI.1 x DT2407L 2X Life Metal Reciprocating Blade 152mm, 14/18 TPI.1 x DT2315L 2X Life General Purpose Reciprocating Blade 100mm, 10 TPI.
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. These reciprocating blades are ideal for general purpose use in wood, metal, tough plastic and sandwich materials. The Universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2355QZ reciprocating blades are ideal for use in heavy guage metal, rubber, fibreglass and angle iron.
Flexovit 1/2 sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, they are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 115 x 280mm.Packed in 10s
Flexovit powerfile sanding belts are made from tough and sharp high performance Aluminium Oxide making this product extremely durable, long lasting and suitable for use on a variety of surfaces. Suitable for use on wood, paint and metal. Size: 454 x 13mm.Packed in 4s
The DEWALT DT43921 Metal Cut Off Disc is manufactured from professional aluminium oxide grain, designed for cordless tools to maximise life and performance. Ideal for use in general cutting work on stainless steel, ferrous metals and non-ferrous metals. With an extra thin kerf (1.2mm) for the perfect cut. Pack of 10 discs supplied in a storage tin. Specification: Diameter: 115mmThickness: 1.2mmBore Size: 22.23mm
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2209-QZ (T101D) XPC HCS Wood Jigsaw Blades provide clean and fast straight cuts in wood, chipboard and plastics.
Faithfull Aluminium oxide abrasive on a flexible paper backing with the added convenience of the hook & loop quick change system. Pre-punched for use on random orbital sanders with integral dust extraction systems. Suitable for use on wood, metal, plastics and filler. Hole configuration: DID3.Pack of 25 Faithfull Hook & Loop Sanding Disc DID3 Holed 125mm x 120g
The DEWALT DRS18100 Insulated Cable Staples are designed for use in the DEWALT® DCN701 Cordless Cable Stapler. They are UL® listed (406A) for common Romex® (NM Sheathed Cable) and MC (Metal Clad) cable applications. The staple crown is plastic insulated and these fasteners adhere to the National Electrical Code®. These staples can also be driven manually using a hammer for tight space applications.
The DEWALT Galvanised Ring Shank Nails are paper-taped for use with the DEWALT DCN692 Nailer and other popular brand first fix angled nailers. Annular rings for ultimate grip on first fix, framing applications. Galvanised finish for increased durability, suitable for indoor and outdoor use. Paper-taped for easy loading, handling and a cleaner job. Inclination of the nails in the casing is 33-34°.1 x Box of 2,200 DEWALT DNPT31R90 Galvanised 33° Angle Ring Shank Nails 3.1 x 90mm
The Faithfull Power Plus TRANHEAT is a 110V vented portable transformer suitable for use with 110V electric heaters or other applications where a continuous load is to be applied. This model has two 110 Volt sockets, one is 16 amp and the other is 32 amp. Safety features include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with BS approved 13 amp rubber plug. The vented steel case conforms to IP20 for water and dust ingress protection. Continuous rating: 3KVA.
Aluminium Oxide fibre discs are tough and sharp, combined with a dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56835 backing pad, sold separately.1 x Pack of 10 Flexovit Aluminium Oxide Fibre Discs 115mm Medium 50g
The Dormer P809 Solid Carbide Bright Rotary Burr with oval ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Oval has the following specification: Diameter: 12.70mm.Shank Diameter: 6mm.Working Length: 22mm.Overall Length: 67mm.
Senco DuraSpin Collated Screws for Drywall to Heavy Steel applications. Phillips No.2 drive, clear zinc finish, fine thread. 50 screws per strip. CE-marked (EN 14592). Suitable for both cordless and mains-operated machines.Pack of 1,000 Senco DuraSpin Collated Screws Drywall to Heavy Steel 3.5 x 45mm
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Type : Ring.Length : 50mm.Pack : Box of 2000.
The Starrett 3 piece SDS Plus Chisel Set is used for demolition and stripping on both masonry and concrete materials. The precision ground chisel edge comes with a special hardening process for effective and efficient results. Suitable for both corded and cordless drills with hammer action. Contains the following: 1 x SDS Plus Pointed Chisel 250mm. 1 x SDS Plus Flast Chisel 20 x 250mm. 1 x SDS Plus Wide Chisel 40 x 250mm.
