Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inThe Trend CO12AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for use on softwoods, hardwoods, MDF, plywood and chipboard.All cutters have a bottom cut feature.Diameter: 8 mm.Cutting Depth: 25 mm.Shank Diameter: 1/4 in.
Trend Craft Pro Two Fluted Tungsten Carbide Tipped straight cutters are suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters are TCT and have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank: 1/4inD - Diameter - 3/4in 19.1mmC - Cutting Length - 1.0in 25.4mmT.C.T. 2 Flutes
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Metal Grinding Disc 230 x 6.4 x 22.23mm
The Einhell Aluminium Guide Rails enable clean and precise cuts. Suitable for both right-angled cuts and angle cuts in equal measure. The slide lining contributes to the smooth running of the machines, and the splinter guard is provided for producing clean cuts. Gripper strips make these rails non-slip, increasing user safety. Compatible with the Einhell Plunge Saw and the Einhell Expert Handheld Circular Saws. Supplied with: 2 x Connector Bars and 2 x Track Clamps. Specification: Rail Length: 1000mm.
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size. 100 x 30mm.Grit: Coarse.
Irwin Sabre Saw Blades Nail Embeded Wood 656R offer superior construction and design making them faster cutting and longer lasting. Cuts nail embedded wood and suitable for use with materials 5mm (3/16 Inch) and thicker. Length: 150mm.Teeth: 6 tpi.Irwin 656R Sabre Saw Blade Nail Embedded Wood Cut. Pack of 5.
Flexipads Scruffballs are ball shaped scruffing tools, ideal for getting into tight corners, with a layer construction for heat dispersal.75mm (3in) balls are ideal for corners and small areas. Specifications:Colour: Grey (Ultra Fine).Spindle fitting: 6mm.Max RPM: 10,000. Made in Great Britain
Soft sponge, open cell, for polishing and compounding of cellulose, acrylics etc. An all purpose foam with a medium grade density. Type. BCH - 14m.Diameter: 150mm x 50mm. Made in Great BritainThread. M14 x 2.
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 10 with the following dimensions: T40 x 25mm.
The Irwin Professional Aluminium Circular Saw Blade has expansion slots that help keep the blade flat. Triple Chip Ground Tooth (TCG) provide an excellent cut finish. Specially designed for cutting all types of non-ferrous metals such as aluminium, copper, lead and plastics.This IRWIN Professional Aluminium Circular Saw Blade has the following specifications: Blade Diameter: 184mm.Bore: 30mm.Teeth: 48.Kerf Thickness: 2.5mm.Tooth Config: TCG.
The Irwin General Purpose Table & Mitre Saw Blade with construction grade tungsten carbide tips that retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Table & Mitre Saw Blade has the following specifications: Blade Diameter: 400mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 3.5mm.Tooth Config: ATB.Machine: Table & Mitre.
The Starrett SDS Plus Arbor comes with a high speed pilot drill. Allows the arbor to be used in SDS-Plus rotary hammer drills, with the hammer action turned off. The Starrett A1-1 SDS Plus Arbor made for use with holesaws ranging from 32-210mm. Quick-Hitch arbors feature two locating pins inserted into the holesaw cap to prevent the holesaw overtightening on the screw thread. This allows easy and instant holesaw changes, without tools and without removing the arbor from the chuck. Specifications: Holesaw Pairing: FCH and CT.Holesaw Diameter: 32-210mm (1.1/4-8.9/32in).Arbor Shank Sizes: 11mm (7/16in) hex (excluding SDS-Plus Arbors).Screw Thread: 5/8in-18.Chuck Size: 13mm (1/2in).Drill: HSS Drill Length: 79mm (3.1/8in).
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diameter.70mm.Width. 15mm.Wire Height. 25mm.Wire Gauge.0.30.Wire Type. Steel.Max. R. P. M. 4,500
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. These DEWALT BLACK GOLD Hex HSS-G Drill Bits have the following specifications: Tip Diameter: 7mm.Length: 111mm.Working Length: 73mm.Pack Qty.: 1.
The DEWALT DT99591 FlexVolt XR Poroton Blades are well suited to the cutting of standard class 12 clay blocks as well as various other materials such as general masonry, concrete and block. Their extreme runtime design enhances durability doubling the blades life span. Compatible with the DEWALT FlexVolt Alligator Saw 54 Volt. Can also be used with other DEWALT Models: DWE397, DWE398 & DWE399.
Senco DuraSpin® Collated Decking screws with a green Weatherex coating. Square No.2 drive, coarse thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Decking Screws with Weatherex coating. Size: 4.2 x 55mm.
Senco DuraSpin® Collated Screws for Drywall to Wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, bugle head. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Wood. Size: 3.9 x 50mm.
Senco 34° angled collated brad nails with a sharp chisel point, smooth shank, D-head and Galvanised finish.Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 50mm.
