Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 75 28 Collation AngleSKU S280R75G8 Profile RING Finish G8 Description STICK NAIL 2.80-75 RING GAL8 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S
Masterplug Weatherproof IP54 enclosure supplied with 4 socket 10 metre extension lead. Ideal for temporary outdoor power solutions, such as for outdoor lighting/decorations.
The Metabo Starlock HSC Plunge Cut Saw Blade has a convex row of teeth for easy starting and clean cutting results. Provides clean plunge cuts in wood. With a lasered depth scale for precise immersion depths.
The Metabo Multi Row Professional UP Wall Chaser Blade is ideal for electric installations, laying cables and empty pipes under plaster etc. Highly reduced workload thanks to the intelligent system of interlacing arrangement of segments, since cutting away the centre is not required. There is also a reduction of dirt and dust, since the material is removed cleanly and completely from the slot. Customised slots for individual lines Ø12mm, or for Ø20mm and Ø25mm empty pipes. Suitable for the Metabo MFE40 Wall Chaser. Specification: Diameter x Bore: 125 x 22.23mmMax. Cutting Width: 2 Rows 20mm, 3 Rows 30mmMax. Speed: 12,200/min.The Metabo 3 Row Professional UP Universal Wall Chaser Blade has the following specification: Size: 125 x 28.5 x 22.23mmSegment Dimensions: 28.5 x 7mmNumber of Segments: 30
The Faithfull SK7 Sharp Scraper Blade is perfect for fast, clean and deep cutting. Ideal for cutting soft expansion joints, window sealing putty and insulation materials. Manufactured from high-carbon SK7 steel for a long working life. Compatible with many multi-function, oscillating power tools. Specification: Cutting Length: 100mmWidth: 8-28mmMaterial: SK7 blued steel
Faithfull 150mm Hook & Loop Sanding Discs made from aluminium oxide abrasive on a flexible E-weight paper backing. With the added convenience of the Hook & Loop quick change system. Pre-punched for use on random orbital sanders with integral dust extraction systems. Suitable for use on wood, metal, plastics and filler. Hole configuration: DID2.Pack of 25 Faithfull Hook & Loop Sanding Disc DID2 Holed 150mm x 60g
Faithfull Aluminium oxide is bonded to a tough fibre backing giving an extremely durable disc with a wide variety of applications, particularly metalworking. Designed primarily for use on angle grinders which must be fitted with a suitable backing pad. Diameter: 115mm.Bore: 22mm.Grit: 120.
Faithfull Quarter e-weight aluminium oxide paper sheets for sanding wood, plastics and fillers. They can be used with most orbital palm sanders. Size: 115 x 140mm.Fine.Pack of 5 Sheets.
The DEWALT Universal DE7023 Leg Stand is an extendable unit and, from its 1.9m base unit, two telescopic extensions expand the working area up to 3.9m in length, which will support work pieces over 5 metres in length. The leg stand has a unique bracket mounting system that takes all DEWALT and most competitive mitre saws. These brackets are also available separately meaning that one mitre saw station can be used in conjunction with a variety of machines. These brackets can also even be used with a board to create a large surface for supporting work. The Mitre saw station also features quick release spring-loaded retractable legs, to create a secure working platform on the work site. A convenient carry handle on the underside of the stand provides easy, balanced single-handed transportation of the stand. Transportation is aided yet further by a shoulder carry strap, which is also available. With the lightweight construction of the leg stand and its compact self contained parts, this is the first mitre saw system that provides the user with a truly portable yet versatile and stable mitre saw workstation for site. Comes with: 2 x work stops / support and mitre saw brackets. Fits the following saws: DW777, DW712, DW717, DW718, DW780. Height: 820mm. Closed Length: 1.7m. Open Length: 3.9m. Max. Loading: 182kg. Weight: 19.8kg.
The BlueSpot Tools Magnetic Nut Driver is manufactured from heat-treated and tempered steel alloy for increased strength and durability. With a blackened carbon coating to protect against corrosion. Strong magnets hold fasteners securely for ease of use. It has a 1/4in drive, ideal for use with electric drills and screwdrivers for the precise driving of nuts, bolts and hex head screws.
DEWALT Mesh Sanding Sheets last at least 4 times longer than traditional DEWALT sandpaper sheets. Fibres are drawn away from the surface of the sheet into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. The sanding sheets enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding sheets. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding sheets have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3025 1/4 Mesh Sanding Sheets have the following specifications:Size: 115 x 115mm.Grit: 240.Pack quantity: 5.
DEWALT BLACK GOLD Hex HSS-G Drill Bits made with a 1/4in hex shank, designed to withstand radial torque with percussion hammers and compatible with most power drills. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. Its strong, conical braided design provides extreme durability and resistance to breakage. These DEWALT BLACK GOLD Hex HSS-G Drill Bits have the following specifications: Tip Diameter: 8.0mm.Length: 117mm.Working Length: 79mm.Pack Qty.: 1.
A bearing guided tungsten carbide tipped cutter designed to produce a decorative edge when working on MDF, softwoods, hardwoods, and plywood. 1/4in Shank Radius: 3.2mm Diameter: 22mm
Flexovit Hook & Loop Sanding Discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes.These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook & loop backing allows quick and easy disc changing to fit most brands of eccentric sanders.Suitable for use on wood, paint and metal.Specifications:Size: 150mm, 8 holes
Pack of 6 Hook & Loop Sanding Discs 150mm Medium 80G
Flexovit Hook & Loop Sanding Discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes.These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook & loop backing allows quick and easy disc changing to fit most brands of eccentric sanders.Suitable for use on wood, paint and metal.Specifications:Size: 125mm, 8 holes
Pack of 6 Flexovit Hook & Loop Sanding Discs 125mm Coarse 50G
Flexovit Hook & Loop Sanding Discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes.These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook & loop backing allows quick and easy disc changing to fit most brands of eccentric sanders.Suitable for use on wood, paint and metal.Specifications:Size: 125mm, 8 holes
Pack of 6 Flexovit Hook & Loop Sanding Disc 125mm Medium 80G
Flexovit Hook & Loop Sanding Discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes.These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook & loop backing allows quick and easy disc changing to fit most brands of eccentric sanders.Suitable for use on wood, paint and metal.Specifications:Size: 115mm, 8 holes
Pack of 6 Flexovit Hook & Loop Sanding Discs 115mm Coarse 50G
Flexovit Hook & Loop Sanding Discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes.These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook & loop backing allows quick and easy disc changing to fit most brands of eccentric sanders.Suitable for use on wood, paint and metal.Specifications:Size: 115mm, 8 holes
Pack of 6 Assorted Flexovit Hook & Loop Sanding Discs 115mm.
Flexovit Hook & Loop Sanding Discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes.These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook & loop backing allows quick and easy disc changing to fit most brands of eccentric sanders.Suitable for use on wood, paint and metal.Specifications:Size: 125mm, 8 holes
Pack of 6 Flexovit Hook & Loop Sanding Discs 125mm Fine 120G
Flexovit Hook & Loop Sanding Discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes.These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook & loop backing allows quick and easy disc changing to fit most brands of eccentric sanders.Suitable for use on wood, paint and metal.Specifications:Size: 115mm, 8 holes
Pack of 6 Hook & Loop Sanding Discs 115mm Medium 80G
The Dormer P807 Solid Carbide Bright Rotary Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With a improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball has the following specification: Diameter: 12.70mm.Shank Diameter: 6mm.Working Length: 11mm.Overall Length: 56mm.
The Dormer P809 Solid Carbide Bright Rotary Burr with oval ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Rotary Bright Burr Oval has the following specification: Diameter: 3mm.Shank Diamter: 3mm.Working Length: 6mm.Overall Length: 38mm.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/2in ShankCutting Diameter: 12.7 mm 1/2in. Cutting Length: 63 mm. Shank Diameter: 1/2in.
These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Size: No.2 Pozidrive.Length: 50m x 1/4-inch hex.Box of 10.
These Stanley screwdriver bits come in 25, 50, 70, and 100mm lengths and can be packed in quantities of 3's, 10's, or 25's. They are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No.1 Pozidrive.Length. 25 mm x 1/4-inch hex.Box of 25.
The tough and sharp high performance aluminium oxide, combined with dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56838 backing pad, sold separately.Pack of 3 Flexovit Aluminium Oxide Fibre Discs 125mm Fine 80g
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 75 x 457mm 120g Fine
MEXCO GPX10 Concrete Diamond Blades have been specifically designed for cutting a wide range of general purpose building materials. The GPX10 offers a cost effective solution for the user who requires a diamond blade which can cope with the cutting of the most widely used non-abrasive building materials.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 10mm
1 x MEXCO GPX10 Concrete Diamond Blade 105 x 16mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
The MEXCO Slotted Dry Core Drill XCEL Grade 9 Piece Kit comes in a handy case. Contains:3 x Slotted Dry Core Drills: 38, 52, 117mm2 x Hex Adaptors: 80, 250mm2 x SDS Adaptors: 80, 250mm1 x A-Taper Pilot Drill 10 x 175mm1 x Drift Key
MEXCO UHXCEL Grade Porcelain & Ceramic Tile Diamond Blade. Developed to offer fast cutting of hard natural stone products and man made fired materials such as porcelain and ceramic. A ventilated steel centre provides rapid heat dispersion.Segment Height: 10mm.
The MEXCO Ceramica Diamond Dry Polishing Disc. The ultimate dry polishing system for marble, granite and other natural stones. Ideal for working on site, widely used by floor renovators, restorers and natural stone floor specialists. These premium diamond dry polishing discs should be used on Angle Grinders with speeds between 11000-13000 RPM.
1 x MEXCO Ceramica Diamond Dry Polishing Disc 50 GritDiameter: 100mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 152 x 450mm
