DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3135 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 10.
These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 64mm
DEWALT Extreme Tri-Flute Spade Bits with 3 cutting edges for up to 6x faster cutting, combined with a tri-flute for optimum chip removal and less binding. There are 3 cutting spurs for cleaner and faster holes, the spurs also extend drilling life. Its full screw tip allows the bit to self-feed, for ease of use and pull through.Fitted with a quick-change shank, fits standard quick-change extensions and 1/4in hex bit adaptors. For use with corded and cordless drills. Suitable for drilling holes in wood up to 100mm deep.
1 x DEWALT Extreme Tri-Flute Spade Bit 25 x 152mm.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28 Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
These DEWALT 9G G12 Galvanised Staples are designed to be used with the DCFS950 Fencing Stapler. G12 galvanised for outdoor durability.Pack of 960 DEWALT DFS9150B1G 9G G12 Galvanised Staples 40mm
The DEWALT reciprocating bi-metal construction blades combine HCS and HSS for increased flexibility, durability and have been designed for use with cordless machines. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil and these blades are ideal for fast cutting of metals, wood and plastics.The DEWALT DEWDT2345QZ reciprocating blades are ideal for general purpose use on wood, wood with nails, aluminium and fibreglass. Length: 152mm. Pitch: 2.5mm.
The DEWALT DCE6820 XR Water Tank provides water based dust suppression when cutting concrete or masonry with cutting or drilling equipment. For use with cutoff saws as well as core drills with water delivery systems. It also functions as a portable water source, suitable for a variety of applications. The easy to use control panel allows you to turn on the water supply with the flip of a switch. No manual pumping. Fitted with a durable, ink-resistant, braided hose and adjustable nozzle. This spray nozzle and quick connect adaptor provides cleaning capabilities and quick connection to core drills, cut off saws and other tools. A translucent tank allows you to easily view liquid level and avoid over-filling. Easy to fill and clean thanks to its wide mouth opening. The large cap helps prevent spills and tether keeps cap attached to the tank. The water tank has two handles so users can comfortably move the water tank around the jobsite manually. It can also be stacked onto a TSTAK case for easier transportation. Compatible with the Wireless Tool Control system.This allows for automatic water delivery as soon as you start drilling or cutting. Shortly after you stop, the water delivery also stops automatically. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Tank Capacity: 15 litres. Hose Length: 3m.
The DEWALT DEWDT7701QZ 9.5mm diameter screwdriving guide has a self retracting guide sleeve that protects fingers and holds screws in place, whilst eliminating wobbling and slipping.
The DEWALT Plunge Saw Blades with an alternate top bevel for fine cutting in wood. They feature lasercut expansion slots that reduce noise and vibration. With extra large sub micro grain carbide teeth remain sharper for much longer. The corrosion resistant carbide extends cutting life, even in extreme materials. Size: 165 x 20mm Bore.The DEWALT DT1091 Plunge Saw Blade has the following specification: Size: 165 x 20mm Bore.Tooth: 40 Teeth 2.0mm POS +5°.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 50 Collation Angle 28 DegreesSKU S28050 Profile STICK Finish G8 Description STICK NAIL 2.80-50 SMOOTH GAL8 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S
BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 19mm.Colour : Brown.Pack : Clam pack of 1000.
The DEWALT Extreme Cement Saw Blade features synthetic PCD (Polycrystalline Diamond) tipped teeth. These PCD coated teeth provide 100% longer life in fibre cement than TCT tipped blades. The laser cut blade features anti-vibration body slots and precision ground tips. The blade design also helps to reduce dust production when cutting fibre cement materials. Suitable for cutting a range of materials including fibre cement board, laminate/pre finished flooring, MDF, plywood, etc.This DEWALT Extreme PCD Fibre Cement Saw Blade has the following specification: Blade Diameter: 160mm.Bore Size: 20mm.Tooth Count: 4.Kerf Thickness: 1.8mm.Plate Thickness: 1.4mm.Grind: FTOP.Rake Angle: 12°.
These Faithfull brushes have nylon bristles for use on wood, metal and stone. Many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2. The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.The Faithfull FAIWBN65 Nylon cup brush has the following dimensions:Size: 65mm diameter x 6mm shaft x 1.5mm bristle.
Flexovit hook & loop sanding discs are tough and durable, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Hook & Loop backing allows quick and easy disc changing to fit most brands of eccentric sanders. Suitable for use on wood, paint and metal. Size: 125mm. 8 holes.Grit: 50 (Coarse).Pack quantity: 15.
The angles flaps mean more abrasive makes contact with the workpiece than a conventional fibre disc which increases productivity. For use with Angle Grinders Ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. Suitable for use on Metal Wood and Paint. Diameter: 125mm
The DEWALT Multi-Tool Wood & Nails Blade is suitable for use on nail embedded timber and resists damage to the teeth when encountering unexpected nails. The blade has a bi-metal construction, ensuring that it maintains a sharper edge for longer. The 43mm cutting depth maximises the areas that the tool and accessory can be used in. The blade is quick and easy to change, and can be used on more than just DEWALT branded multi-tools. Ideal for the following applications: Cutting wood with nails.Cutting wood.Cutting drywall.Cutting PVC. Specifications:Blade length: 43mm.Blade width: 30mm.
The DEWALT Impact Torsion Pozi Bits have a 15° torsion zone that allows the screwdriver bit to flex rather than break, and the full fit head prevents rounding of the screw head and prevents 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied in packs of 2, 5 or 15.DEWALT Impact Torsion Bits PZ1 50mm Pack of 5
The DEWALT Impact Torsion Phillips Bits have a 15° torsion zone that allows the screw driver bit to flex rather than break and a full fit head prevents the rounding of the screw head and prevents 'cam out' (bit head slipping out of screw head due to the turning force). The magnetic screwlock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied in a pack of 5.DEWALT Impact Torsion Bits PH2 25mm Pack of 5
This 7-piece screwdriver bit set contains 6 x 25mm assorted screwdriver bits and a magnetic holder. Supplied in a plastic storage box.Contents :Phillips - PH1 and PH2.Pozi - PZ1 and PZ2.Flared - 0.8 x 5.0mm and 1.2 x 6.5mm.Magnetic bit holder.
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No.2 Phillips.Length: 25mm x 1/4-inch hex.Pack quantity: 3.
Masterplug 110 Volt low voltage cable reel with thermal cut-out to prevent overheating. With 2 x 16 Amp Sockets and a sturdy tubular steel frame. Available in 25 metre or 50 metre lengths and manufactured to BS EN 61242.25 metre arctic cable.
The DEWALT DT2407L 2X Life Reciprocating Metal Saw Blades have superior High Speed Steel teeth with added Cobalt for excellent cutting performance and extreme durability in metal applications. The blade has increased height and thickness for sturdiness, strength and extreme durability with a 14/18 tooth configuration to reduce tooth breakage in hard metals. Excellent cutting performance and long life in the toughest applications. The ToughCoat proprietary coating reduces heat build up and increases blade life and the aggressive shank angle increases tooth engagement in materials for excellent cutting performance and extended blade life. For cutting a range of metals including: Rebar, Angle Iron, Black Pipe, Copper, Duct Work, Conduit, Sheet Metal, Thin Gauge Steel and Pipe. Supplied in a pack of 5.
This DEWALT Extreme Runtime FlexVolt Circular Saw Blade has been designed for use with the DCS577 FlexVolt Circular Saw and features a unique diamond-shaped bore that drives the blade at a higher torque. Next-generation carbide allows up to 3 regrinds and patented grind angles allow for faster cuts at a lower force. The 1.55mm thin kerf is designed specifically for cordless circular saws that require less push force when cutting. Expansion slots help to dampen noise and reduce vibration.1 x DEWALT Extreme Runtime FlexVolt Circular Saw Blade 190mm x Diamond x 24T.
RUBI TVH SUPERPRO Diamond Blade for cutting hard materials, such as granite, rustic tiles, clinker, refractory, slate, quartzite and porcelain tile. The specific design of the diamond band offers greater speed of cutting harder materials without sacrificing finish quality.Suitable for cutting materials up to 3/4in (20mm) thick. Only for straight cuts, not suitable for mitring.
1 x RUBI TVH250 SUPERPRO Diamond Blade 250mm.Specifications: Diameter: 250mm.Bore: 25.4mm.Thickness: 1.6mm.
RUBI TVR Turbo Viper Diamond Blades are recommended for cutting in hard materials such as granite, slate, quartzite, rustic tiles, klinker and porcelain tile. Robust, reinforced blade design. Suitable for cutting materials less than 3/4in (20mm) thick.
1 x RUBI TVR125 TVR SUPERPRO Diamond Blade 125mm.Specifications:Diameter: 125mm.Bore: 22.2mm.Thickness: 1.4mm.
The IRWIN® Impact Performance Magnetic Torsion Bit Holder has an extended torsion zone that helps to maximise bit life and turning force when used in extreme applications. For use with impact drivers and 25mm impact bits. Length: 75mm
The DEWALT FlexVolt XR Wood Reciprocating Blades are coated in a special Toughcoat finish which reduces the build up of heat thus improving cutting performance and speed up to twice as much as market competitors. They have been optimised to deliver the best cutting performance in wood cutting applications from light to heavy demolition work. The blades can tackle nail embedded wood in window frames, door frames, decking and more. Designed to be used in conjunction with the FlexVolt 54 Volt Reciprocating Saw.The DEWALT DT99555 FlexVolt XR Wood Reciprocating Blades have the following specification: Length: 230mm.TPI: 4/6.Pack Size: 5.
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.
The BOSCH EXPERT Multi Material PC Plus Hole Saws are a great all-rounder for every professional. Ground and sharpened fine carbide teeth provide increased strength, durability and precision. It's slot design allows for a better view and plug ejection.Use in conjunction with the Bosch Power Change Plus keyless arbor for increased accuracy and robustness.
1 x BOSCH EXPERT Multi Material PC Plus Hole Saw 127 x 60mm
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 915 x 100mm 40g
The DEWALT Cordless Extreme Framing Circular Saw Blade has a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Suitable for ripping and cross-cutting natural timbers and cutting composite wood based sheet materials e.g. Plywood, MDF and chipboard. NOT recommended for timbers that contains nails.The DEWALT DT10624QZ Cordless Extreme Framing Circular Saw Blade has the following specifications: Blade Diameter: 165mm.Bore Size: 20mm.Tooth Count: 24.
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil. The blades have an aggressive shank angle for longer cutting life with sharper tooth geometry for faster cutting in ferrous and non ferrous metal, sheet metal, pipes and profiles.This DEWALT Bi-Metal Metal Cutting Reciprocating Blade has the following specification: Application: Cuts in metal, sheet metal, pipes and profiles.Material Thickness: 3mm.Length: 203mm.Pitch: 1.4mm.Pack Quantity: 5.
