The Trend CR/DWS/B6/FC is a 6 inch x 2.3/8 inch double sided diamond bench stone with monocrystalline diamonds for fast, clean, stock removal which offers excellent sharpening performance. It is double sided for coarse sharpening and fine honing. Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged edge or blunt tools, including chisels and plane irons. The Fine is ideal for cabinet making for a fine finish and refines the cutting edges of chisels, small knives, etc - achieves a razor edge in seconds. With plastic base and non slip feet with and protective lid. Oval holes design on fine side to collect and hold metal residue. Fine side also has clear solid area for small tools. Ideal for site and workshop. Use with plane irons and chisels. Suitable for all hand tools. Recommended for use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.
The DEWALT Cordless Mitre Saw Blades have been design for use with the DCS365 Cordless XPS Mitre Saw. The blades produce a higher quality cut with reduced tear-out and less vibration, increasing battery life. They also feature optimised grind angles and ultra sharp teeth with a new, thin plate design.This DEWALT Cordless Mitre Saw Blade has the following specification: Application: Plywood / Natural Wood / MDF.Finish: Ultra Fine Finish.Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 60.Kerf Thickness: 2.16mm.Plate Thickness: 1.0mm.Grind: ATB.Rake Angle: +7°.
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming square with a hand chisel or a corner chisel. Diameter: 12.7mm.Cutting length: 19mm.Shank: 1/4in.
Combination pierce and trim cutters. These cutters pierce and cut out aperture in laminate worktops. The base of the cutter acts as a guide follower. Single Flute cutters. Single Flute cutters.Cutting Length: 18mm, Diameter: 6.3mm.Shank. 1/4in.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 25 mmD = 25.4 mm 1in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 4.5 mmD = 11 mm
Pack of 1000 DEWALT Drywall Collated Coarse Thread Screws 3.5 x 35mm. The DEWALT Drywall Collated Coarse Thread Screws come with a bugle head which countersinks into plaster sheet without tearing the top layer and will set slightly below the surface for a neat finish. The curved surface under the head gently forms the base material without crushing. A constant and sharp needle point allows for fast and easy installation. Black phosphate finish for better corrosion resistance. The screws are collated into a strip, specifically designed for easy and jam-free installation. Suitable for DeWALT , Powers, HILTI, Makita, Senco and most other competitor screwdrivers. 3.5 x 35mm (Pack 1000)
The Makita B-33015 Blade has been specifically for use with plunge type saws. Patented vibration dampening allows the blade to run truer with less wobble, easily plunging into material with little effort. Suitable for cutting both wood and aluminium, they are especially designed for a smooth clean cut. Specifications: Blade Diameter: 165mm.Bore: 20mm.Kerf: 2.2mm.Rake: 8°.Thickness: 1.6mm.Tooth Count: 48.
The DEWALT Multi-Tool Rigid Scraper Blade is ideal for surface removal of a wide range of materials. The blade is quick and easy to change and fits all common oscillating tools. Suitable for scraping the following materials:Adhesives.Lacquers.Sealants.
The Faithfull Power Plus TRANHEAT is a 110V vented portable transformer suitable for use with 110V electric heaters or other applications where a continuous load is to be applied. This model has two 110 Volt sockets, one is 16 amp and the other is 32 amp. Safety features include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with BS approved 13 amp rubber plug. The vented steel case conforms to IP20 for water and dust ingress protection. Continuous rating: 3KVA.
The DEWALT Extreme Diamond Cutting Blade has a 3 x 12mm diamond segment with an aggressive cut pattern giving faster cuts and longer blade life. With an optimised wheel edge design for better debris removal. For cutting through concrete and masonry materials, wet or dry conditions. Ideal for use with the DCS690 FlexVolt XR Cut Off Saw.This DEWALT Extreme Wet & Dry Use Diamond Blade has the following specification: Diameter: 230mmBore Size: 22.23mmSegment Height: 12mmSegment Thickness: 2.6mmMax. rpm: 6,600/min.
Flexovit detail hook & loop sanding sheets are available in two sizes to fit most brands of detail sanders. The hook and loop backing allows quick and easy sheet changing. The tough and sharp high performance aluminium oxide, combined with a heavy paper backing makes this product extremely durable, long lasting and suitable for use on a variety of surfaces. Suitable for use on: wood, paint and metal. Size: Delta Shape, 105mm.Packed in 6s
The Blue Spot Tools Circular Saw Blades are manufactured from carbon steel for increased durability. The carbide tipped teeth have a 15° positive rake. Ideal for many materials including hardwood, softwood, chipboard and other composite materials. This 3 piece set includes: 1 x TCT Circular Saw Blade 210 x 30mm Bore x 24T. 1 x TCT Circular Saw Blade 210 x 30mm Bore x 40T. 1 x TCT Circular Saw Blade 210 x 30mm Bore x 48T. 3 x Reducing Rings: 25mm, 20mm and 16mm.
This Faithfull Sanding Disc is manufactured from Aluminium Oxide abrasive on a flexible paper backing. It is ideal for use on wood, metal and plastics to remove imperfections prior to final finishing. Designed for use on a backing pad (e.g. FAIABP125) in conjunction with any portable electric drill.Pack of 5.Diameter: 125mm.Bore: 6mm.Grade: medium.
Faithfull Fibre Backed Sanding Discs have an aluminium oxide grit that can be used on both metal and wood. Suitable for use with angle grinders, must be used with a suitable backing pad.These Faithfull Fibre Backed Sanding Discs have the following specification: Diameter: 115mmBore: 22mmGrit: 40GPack Quantity: 25
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 150mm.Bore: 20mm.Teeth: 40.Kerf Thickness: 2.4mm.Tooth Config: ATB.
The Irwin Phillips Power bits are specially designed for the higher torque requirements of power tools. They are designed to provide more clearance between the power tool and the fastener.The Irwin IRW10504366 Power Screwdriver Bits come in the following:Phillips PH1 1/4 inch Hex 90mm long.
The DEWALT Galvanised Metal Connector Twist Nails are made from non-alloy steel in accordance with EN10016, ensuring their strength and durability. They feature a spiral shank which provides a strong hold and reduces the risk of nail pull-out. Ideal for a variety of applications, from construction to woodworking. Compatible with the DEWALT DCN694N XR Brushless Metal Connector Nailer. Specifications: Size: 3.4 x 35mm. Pack Qty.: 1,000.
DEWALT DT20735 Wood & Nails Multi-tool Blade.Suitable for a wide range of cutting applications, including wood, wood with nails, drywall and PVC. UNIVERSAL FITMENT™ for adaptor-free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Specifications: Width: 30mm.Length: 43mm.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3127 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 240.Pack quantity: 5.
The DEWALT 16 Gauge Stainless Steel 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. Manufactured from high quality stainless steel for a high resistance to rust. DEWALT nails are made from inspected high quality steel to ensure reliability in performance.These DEWALT DNBA1638SZ 16 Gauge 20° Finish Nails have the following specification: Length: 38mm.Type: 20° Angled Nails.Finish: Stainless Steel.Gauge: 1.6 (16GA).Box Quantity: 2500.
DEWALT Mesh Sanding Sheets last at least 4 times longer than traditional DEWALT sandpaper sheets. Fibres are drawn away from the surface of the sheet into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. The sanding sheets enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding sheets. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding sheets have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3023 1/4 Mesh Sanding Sheets have the following specifications:Size: 115 x 115mm.Grit: 120.Pack quantity: 5.
