The BlueSpot Spline Bit Set contains a selection of bits, drop forged from heat treated chrome vanadium steel for increased durability. Suitable for hand and power tools. Complete with handy carrying case for quick and easy storage. Contains the following: 5 x 30mm Spline Bits: M5, M6, M8, M10, M125 x 75mm Spline Bits: M5, M6, M8, M10, M121 x 1/2in Adaptor
The Irwin Speedhammer Plus Chisels are for use with SDS Plus machines. Can be used on concrete and masonry and have a grey sandblasted professional finish. They are suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit.1 x Irwin Speedhammer Plus Spade Chisel 40mm Length 250mm
The Faithfull Power Plus SMD LED Task Light has a highly efficient 20 Watt SMD (Surface Mounted Diode) LED that provides an extremely bright, glare free 2,000 Lumen's of light output and is mounted in a heavy-duty, impact resistant case rated to *IP44/54.A mirror backed reflector improves the light output and beam spread of the work light, which also has the added benefits of an integrated power take-off socket, allowing the series linking of lamps or for use with power tools*. The lamp has a 3m x 0.75mm² cable and a built-in storage system and is fitted with an approved 240 or 110 volt plug.LED work lights have many uses around the work site or home, providing a glare free bright light that avoids the high heat output associated with halogen bulbs. These lights are cool running and eliminate the fire and burn hazards associated with halogen lighting, which make them ideal for tradesmen who are working close by. They also have the benefit of not drying out plaster or similar finishes too quickly (which can happen with the heat emitted from halogen lights) which can result in cracking.*110 Volt Version is IP54 Rated, Light Maximum Load: 6.25amp Current (Max 1000W), Maximum Link: 15 Lights. Total Socket Load MUST NOT Exceed 1,000 Watt.*240 Volt Version is IP44 Rated, Light Maximum Load: 6.25amp Current (Max 2200W), Maximum Link: 20 Lights. Total Socket Load MUST NOT Exceed 2,200 Watt.Faithfull Power Plus SMD LED Task Light with Power Take-Off 240 Volt Version. The 240 Volt Version is IP44 Rated, Light Maximum Load: 6.25amp Current (Max 2200W), Maximum Link: 20 Lights. Total Socket Load MUST NOT Exceed 2,200 Watt.
Faithfull recess cutters are designed for use in conjunction with a Faithfull tungsten carbide tipped circular cutter (FAISDSBOXCUT) to form recesses for electrical back boxes. The cutter box should be used with hammer action only and rotation stop must be engaged. These products are only suitable for small 2kg SDS Plus machines with a ‘Roto Stop’ feature (not suitable for 5kg machines).This square cutter is designed to form single electrical back boxes. Size: 77 x 77mm.
This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.
Faithfull SDS MAX scaling chisel straight steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular machines used in the UK. Type: Scaling Chisel.Fitting: SDS Max.FAIMAXSC75Length: 300mm Width: 75mm
Faithfull SDS Max point steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular machines used in the UK. Type: Point.Fitting: SDS Max.FAIMAXP400Length: 400 mm
This Faithfull Screwdriver Bit Set is a useful addition to any toolkit. The 30 screwdriver bits are made from S2 steel and include the most popular types and sizes. Also included is a square drive adaptor and a quick-release holder. Contents:7 x 25mm Pozi Bits: PZ0, PZ1, PZ2 (x4), PZ34 x 25mm Phillips Bits: PH0, PH1, PH2, PH35 x 25mm Slotted Bits: 3, 4, 5, 6, 7mm7 x 25mm Hex Bits: 2, 3, 4, 5, 6, 7, 8mm7 x 25mm TORX (Star) Security Bits: TTX10, TTX15, TTX20, TTX25, TTX27, TTX30, TTX401 x 1/4in Hex to 1/4in Square Drive Adaptor1 x 1/4in Quick-Release Magnetic Ejector Bit Holder Supplied in a sturdy plastic case.
These triangular Flex sanding papers are ideal for grinding joint filler in drywall construction. When fitted onto a sander, their triangular shape makes them ideal for processing corners and edges. The sheets are punched to enable dust extraction. They have hook and loop backing and are suitable for the following Flex models:WSE 7 Vario PlusWST 700 VV Plus.The FLX350109 Sanding Papers have the following specifications:Grit size: P40Grit type: CoarseHeight: 290mm.Pack size: 25.
These Faithfull Bi-Metal Demolition Sabre Saw Blades are designed for making quick and clean cuts in mixed materials. These high-quality, flexible blades are manufactured from 8% cobalt bi-metal for precision and stability. They can be used on wood, plastic, non-ferrous metals and are ideal for wood embedded with nails, great for pallet repair. They will also cut composite materials such as plastic, pipe and carbon steel. Ideally suited for materials that are 3.2mm and thicker. Suitable for use with most all-purpose saws (pin fitting, manual or quick-release).Pack of 5 Faithfull S1120HF Bi-Metal Sabre Saw Blades Demolition 300mm 10 TPI
These Faithfull brushes have nylon bristles for use on wood, metal and stone. Many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2. The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.The Faithfull FAIWBN100C Nylon Wheels have a flat circular shape with the following dimensions:Size: 100mm diameter x 6mm shaft x 1.5mm bristle.
These Faithfull brushes have nylon bristles for use on wood, metal and stone. Many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2. The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.The Faithfull FAIWBN65 Nylon cup brush has the following dimensions:Size: 65mm diameter x 6mm shaft x 1.5mm bristle.
This 10-piece screwdriver bit set contains 9 x 25mm assorted screwdriver bits and a magnetic holder. Supplied in a flip up plastic storage box.Contents :Phillips - PH2.Pozi - PZ1, PZ2 and PZ3.Torx - T10, T15, T20, T25 and T30.Magnetic bit holder.
The Faithfull set of three hex to square drive adaptors. Converts any 1/4 inch hexagon drive or drill chuck to accommodate 1/4, 3/8, or 1/2 inch drive sockets.Contains:1/4, 3/8 and 1/2 in square drive.
These Faithfull Professional 1/4in Hexagon Drive Hex Screwdriver Bits are manufactured from high strength, heat treated ‘S2’ grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: Hex 8 ;x 25mm.Pack Size: 3.
These Faithfull Professional 1/4in Hexagon Drive Hex Screwdriver Bits are manufactured from high strength, heat treated ‘S2’ grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: Hex 4 ;x 25mm.Pack Size: 3.
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.The DEWALT DEWDT2169QZ HCS jigsaw blades are engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics. The blades are made from high carbon steel for increased durability with a T shank fitting for all T-shank Jigsaws. The swiss made jigsaw blade is ideal for fast, straight cuts in wood and chipboard up to 100mm thick. The DEWALT DEWDT2169QZ jigsaw blade has the following specifications:Overall Length: 152mmWorking Length: 116mmTooth Pitch: 4mmMax DOC: 100mmEquivalent Bosch Ref: T344DPack Quantity: 5.
The Faithfull Vitrified grinding wheels are suitable for use on most types of bench grinder. White wheels are ideal for the general purpose grinding of ferrous metals but they are particularly suited for the sharpening of cutting tools such as chisels and plane irons. These wheels help keep your tools cooler to avoid overheating and weakening the cutting edge. Supplied with bore reducing bushes and will fit bench grindersThe Faithfull FAIGW20025WG is a 200mm x 25mm vitrified grinding wheel suitable for use on most types of bench grinders. The general purpose grinding wheel can also be used for normal grinding of ferrous metals.The Faithfull FAIGW20025WG is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 25mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 3,350
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 25mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 3,350
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350
