The Makita HR3001CJ SDS Plus Rotary Hammer offers 3-modes of operation: Rotation only, Hammering with Rotation, and Hammering only. Variable speed with constant speed control and forward/reverse rotation for more comfortable handling, even in demanding applications.Drilling efficiency has been drastically increased by the redesigned hammering mechanism. A 'no hammering when idling' function helps increase tool life. Fitted with an anti-vibration main handle for increased comfort. A torque limiter and double insulation increase user safety. Supplied with: 1 x Depth Stop, 1 x Side Handle and 1 x Type 4 MAKPAC Connector Case. Specifications: Modes: Rotation only, Hammering with Rotation, and Hammering only.Input Power: 1,050W.No Load Speed: 0-840/min.Impact Rate: 0-4,500/bpm.Impact Energy: 3.9 joules.Capacity: Concrete: TCT Bit 30mm, TCT/Diamond Core 80mm; Wood 32mm, Steel 13mm.Weight: 4.1kg. The Makita HR3001CJ SDS Plus Rotary Hammer in the 240V Version. Supplied with: 1 x Depth Stop.1 x Side Handle.1 x Type 4 MAKPAC Connector Case.
The Makita 18V DVR350 Vibrating Poker is designed to remove air pockets from wet concrete. It has a compact, ergonomic body and easy to handle. Comes as a Bare Unit, No Battery or Charger. Specifications: Shaft Length: 800mm.Shaft Diameter: 25mm.Vibrations Per Minute: 13,000/min.
The Makita DVC261ZX11 LXT BL Backpack Vacuum Cleaner is powered by 2 x 18V Li-ion batteries in series (not supplied) to supply energy to the powerful 36V DC motor drive system. Equipped with HEPA filter, collects 99.97% of airborne particles, down to 0.03 microns for fine dust collection.Its easy-to-operate hand controller features an on/off switch and max./high/low power selection. There is also a belt clip, so it can be clipped onto a waist belt or harness. A mode memory function allows start-up in the same suction power as when you turned it off previously. Fitted with a comfortable, fully adjustable harness and waist belt providing reduced strain, especially over long work periods. Supplied with: 1 x Lightweight Hose 28mm x 1m.1 x Telescopic Straight Pipe.1 x Bent Pipe.1 x Nozzle.1 x Nozzle Assembly.1 x Hose Band.1 x Filter Bag. Bare Unit - No Battery or Charger supplied. Specifications: Suction Power (Max./High/Low): 105/55/30W.Dust Bag Capacity: Cloth 1.5 litre, Paper 2.0 litre.Max. Air Volume: 2.3m³/min.Max. Sealed Suction: 11 kPa.Weight: 3.8kg.
The Makita DUB184Z Brushless LXT Blower has a powerful brushless motor for increased durability. A cruise control lever allows you to lock the variable speed control trigger at the desired power level, decreasing fatigue over longer operating periods. The design provides optimum nozzle to ground angle for efficient sweeping. Comes as a Bare Unit, No Battery or Charger. Specifications: No Load Speed: 0-18,000/min.Max. Air Speed: 52.1 m/sec.Max. Air Flow Rate: 13.0 m³/min.Weight: 3kg.
The Makita DSD180Z LXT Drywall Cutter has been developed for cutting holes in drywall. Ideal when setting ceiling lights, air vents etc. Its base cover protects drywall surfaces from scratches and damage and it also has a job light. Supplied as a Bare Unit - No Battery or Charger. Specifications: Strokes at No Load: 0-6,000/min.Stroke Length: 6mm.Capacity: Drywall 30mm, Wood 15mm.Blade Size: Drywall: 55 x 18 x 0.55mm, Wood 53 x 18 x 0.55mm.
The Makita DMR056 LXT Radio Lantern functions both as a lantern, with 360 degree light coverage, or a flashlight. It can also operate as a strobe light. A slow light up sequence helps to protect your eyes, while the On/Off mode select button is equipped with memory function so it remembers the last brightness and light tone setting. Its easy to read LCD digital display allows you to select between; AM/FM, Bluetooth, and DAB/DABand Radio stations, with the option to save your favourite stations. There is also a USB output port for charging small devices. Supplied with 1 x Strap Hook. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Frequency Range: DAB: Band III 5A - 13F, FM: 87.50 - 108 Mhz.Light Tone/Colour: Daylight White, Neutral White, Warm White.Lantern Luminous Flux High/Low: 310/155, 300/150, 260/130.Flashlight Luminous Flux High/Low: 200/100.
The Makita DMR055 LXT Radio Lantern is easy to use, thanks to it LCD digital display. Its on/off mode select button is equipped with a memory function, so it can remember the brightness and light tone settings. The lantern design provides 360° of illumination. Its also lightweight and compact, meaning you can carry it anywhere. Overload protection ensures long life. There is also a battery capacity warning function. Comes as a Bare Unit, NO batteries or Charger supplied. Specifications: FM Coverage: 87.50 - 108 Mhz.AM Coverage: 522 - 1,710 kHz.Light Tone/Colour: Warm White.Lantern Luminous Flux High/Low (Lumens): 4 sides 260 / 3 sides 190.Lantern Illuminance High/Low (Lux): 4 sides 130 / 3 sides 115.Weight: 0.95kg (without battery).
The Makita DML814 LXT Worklight has 12 LED's and 3 brightness settings (high / medium / low), ideal for spot lighting. Produces a daylight white colour similar to natural light and ideal for working spaces. The lighting area can be adjusted by turning the individual lamp units. Its easily operable tripod stand is adjustable between 125 – 224cm high. Folds down to a compact size, making it easy to store. The battery capacity warning function automatically notifies the user about reduction in battery capacity with the decrease in illuminance. It also features a padlocked battery cover for increased security. Comes as a Bare Unit, NO battery or charger. Specifications: Bulb Type: LED.Luminous Flux: 3000 / 1700 / 900 Lumen.Illuminance: 1250 / 750 / 400 lx.Dimensions (L x W x H): 573 x 658 x 1,250 – 2,240mm.Folded Dimensions (L x W x H) 260 x 216 x 1,000mm.International Protection Class (IP): IP55.
The Makita DML813 LXT Worklight has 12 LED's and 3 brightness settings (high / medium / low), ideal for spot lighting. Produces a daylight white colour similar to natural light and ideal for working spaces. Its easily operable tripod stand is adjustable between 125 – 224cm high. Folds down to a compact size, making it easy to store. The battery capacity warning function automatically notifies the user about reduction in battery capacity with the decrease IN illuminance. It also features a padlocked battery cover for increased security. Comes as a Bare Unit, NO battery or charger. Specifications: Bulb Type: LED.Luminous Flux: 3000 / 1700 / 900 Lumen.Illuminance: 1250 / 750 / 400 lx.Dimensions (L x W x H): 573 x 658 x 1,250 – 2,240mm.Folded Dimensions (L x W x H) 260 x 216 x 1,000mm.International Protection Class (IP): IP55.
The Makita DML811 LXT LED Worklight can be powered by 18V/14.4V LXT batteries for cordless operation or plugged into the mains, available in both 110V and 240V versions. The worklight is equipped with 30 LEDs, and three brightness settings; low, medium and high.The DML811 can be mounted on to a tripod light stand (NOT included). Specifications: Light Output: 3,000 Lumens.Settings: Low/Medium/High.Power Cord Length: 2.5m. The Makita DML811L LXT LED Worklight 14.4-18V, and is the 110V Version.
The Makita DML811 LXT LED Worklight can be powered by 18V/14.4V LXT batteries for cordless operation or plugged into the mains, available in both 110V and 240V versions. The worklight is equipped with 30 LEDs, and three brightness settings; low, medium and high.The DML811 can be mounted on to a tripod light stand (NOT included). Specifications: Light Output: 3,000 Lumens.Settings: Low/Medium/High.Power Cord Length: 2.5m. The Makita DML811 LXT LED Worklight is the 240V version, and can be mounted on a tripod (NOT INCLUDED).
The Makita DML186 LXT LED Fluorescent Lamp has 6 high-efficiency LEDs for long, continuous, bright illumination.Easy to operate, thanks to its push button on/off switch, the lamp also has an adjustable hand strap with hook and loop fastener.This Makita lamp comes as a Bare Unit, with NO battery or charger supplied. Specifications: Light Output: 500 lumens.Dimensions [LxWxH]: 151 x 81 x 61mm.Weight: 0.30kg.
The Makita DLX2202TJ1 LXT Combo Kit contains the following: 1 x 18V DHP484 Combi Drill is fitted with a powerful brushless motor for increased run time and power. It has an all-metal gear construction with aluminium gear housing and 2 mechanical gears. Speed is controlled via the variable speed trigger and features forward/reverse rotation. No Load Speed: 0-500/0-2,000/min.Impact Rate: 0-7,500/0-30,000/bpm.Max. Torque: 30/54Nm, Settings: 21 and drill.Capacity: Wood 38mm, Masonry 13mm, Steel 13mm.Weight: 1.8kg. 1 x 18V DJV182 Brushless Jigsaw with a top handle design and a brushless motor which produces a greater measure of torque per weight. Variable speed dial to suit blade speed to various applications. Strokes at No Load: 800-3,500/min.Stroke Length: 26mm.Capacity: Steel: 10mm, Wood: 135mm, Aluminium: 20mm.Weight: 2.6kg.
The Makita DLX2134TJ twin pack contains: - 1 x DHP482 LXT Combi Drill features an all-metal gear construction for high transmission durability. Its variable 2-speed, reversible motor features extreme protection technology (XPT), so it is protected from dust, debris and liquids, providing optimal performance in extreme conditions. It also features twin LED job lights with pre-glow and after-glow functions.Ideal for the professional or DIY enthusiast. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpm.Max. Torque: 62Nm, Settings: 21 and Drill.Capacity: Concrete 13mm, Metal 13mm, Wood 38mm.Screw Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm. 1 x DVJ180 LXT Jigsaw is an efficient saw with a 3 stage pendulum action and tool-less blade change. Engine speed can be adjusted between 0 and 2,600 min to suit the material.It has a stroke length of 26mm and cutting capacity of 135mm in wood and 10mm in steel. Also included: - 2 x BL1850B 18v 5Ah Batteries.1 x DC18RC Charger.1 x Makpac Carry Case.
The Makita DHR182 Brushless SDS Plus Hammer Drill is equipped with anti-vibration technology for increased user comfort. Variable speed control trigger with constant speed control and forward/reverse rotation. It offers 3 modes of operation: Rotation Only, Hammer Only and Rotation Hammer.Fitted with an ergonomic soft grip helping to minimise user fatigue. For added user safety there is an electric break and torque limiter. For ease of use it has a one touch slide chuck that accepts SDS Plus bits. Equipped with the Auto-Start Wireless System (AWS), it connects to compatible dust extractors with Bluetooth. The dust extractor automatically runs while the switch is on. Supplied with: 1 x Type 4 MAKPAC Connector Case. Comes as a Bare Unit, No Battery or Charger. Specifications: Modes: Rotary drilling, Hammer drilling or Chiseling.No Load Speed: 0-1,350/min.Impact Rate: 0-5,000/bpm.Impact Energy: 1.7 joules.Capacity: Concrete 18mm, Concrete TCT/Diamond Core 35/32mm, Steel 13mm, Wood 42mm.Weight: 2.4kg.
The Makita DHP485 BL Combi Drill has a brushless motor, two mechanical gears and a variable speed trigger. The drill is fitted with an ergonomic handle for increased comfort. Its single sleeve keyless chuck allows for easy bit installation/removal by one hand. Supplied with: 1 x 18V 5.0Ah Li-ion Battery and 1 x DC18SD 18V Charger. The 101 Piece Bit Set contains the following: 13 x Nutdrivers, 4 x Drill Stop, 1 x Hex key, 2 x Screw Holders, 1 x Centre Punch, 1 x Counter Sink, 6 x Brad Point Drills, 6 x HSS Drills, 6 x Masonry Drills, 3 x Flat Bits, 5 x Hole Saws, 1 x Bit Driver Handle, 1 x 8in Aluminium Spirit Level, 30 x 25mm Screwdriver Bits, 20 x 50mm Screwdriver Bits and 1 x 60mm Magnetic Bit Holder Specification: No Load Speed: 0-500/0-1,900/min.Impact Rate: 0-7,500/0-28,500/bpm.Max. Torque: 50Nm.Torque Settings: 21 and Drill.Capacity: Wood 38mm, Masonry 13mm, Steel 13mm.Weight: 1.8kg.
The Makita DHP482JX14 50th Anniversary LXT Combi Drill is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability, as well as an electric brake and variable speed control trigger. Extremely comfortable to use, with a soft grip handle and lightweight design.For optimal performance in extreme conditions, it features a variable 2-speed reversible motor with extreme protection technology (XPT) giving maximum protection against dust, debris and liquids. The improved ergonomic, soft rubber grip design for vibration absorption and comfortable operation, features a re-contoured rear grip portion and ribbed grip for improved hold. It also has a twin LED job light with pre-glow and after-glow functions. Supplied with: 2 x 5.0Ah Li-ion Batteries, 1 x Belt Clip, 1 x 21 Piece Screw Bit Set in a Battery Shaped Case, 1 x DC18RC Fast Charger and 1 x MAKPAC Type 2 Case. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpm.Max. Torque: 62Nm, Settings: 21 and Drill.Capacity: Concrete 13mm, Metal 13mm, Wood 38mm.Screw Capacity: Machine 6mm, Wood 10 x 90mm.
The Makita DGA900 Brushless Angle Grinder is powered by 2 x 18V Li-ion batteries (NOT supplied), in series to supply energy to the powerful 36V DC motor drive system. It has an electronic current limiter for overload protection, soft start and anti-restart function for ease of use.Active Feedback Sensing Technology (AFT): shuts down the tool to protect the user if the rotation speed suddenly slows down. Automatic Torque Drive Technology (ATDT): automatically changes the cutting speed according to load condition for optimum operation.For added safety there is also an electric brake. The ergonomically designed handle features a soft grip and there is also a large switch lever with lock off function. Battery indicators help prevent over-discharge and overheating. Comes as a Bare Unit, No Battery or Charger. Specifications: No Load Speed: 6,000/min.Wheel Size: 230 x 22.23mm Bore.Max Wheel Thickness: 6.5mm.Weight: 8.0kg.
The Makita DFS250Z Brushless LXT Screwdriver has a durable aluminium gear housing. It is ideal for repetitive screwdriving tasks, especially drywall tasks. Fitted with a highly efficient brushless motor and 'Push drive technology', so the motor only starts once the fixing is engaged to the drive unit which helps to significantly increase battery runtime.It has a compact, lightweight design and an ergonomic handle with rubber grips for increased user control and less fatigue. Other features include a silent clutch, lock-on trigger function, built-in belt clip and an LED job light with afterglow function. Comes as a Bare Unit, No Battery or Charger. Specifications: Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,500/min.Capacity: Drywall Screw 5mm, Self-Drilling Screw 6mm.Weight: 1.5kg.
The Makita DBO380 LXT Brushless Finishing Sander is engineered for efficient sanding and fast material removal. Its 3-stage electronic speed control push button and constant speed control enables precise working. Extreme Protection Technology (XPT) has been engineered for improved dust and water resistance for operation in harsh conditions. The ergonomic rubberised grip and handle have been designed for better fit and added comfort. There is a also a detachable front grip, ideal when sanding in tighter spaces. It is now quick and easy to change the abrasive paper, thanks to a tool-less paper clamp. Supplied with a dust bag, but it can be connected to a dust extractor if required. Specifications: Oscillating Speed: 4,000/8,000/12,000/min.Sanding Stroke per Min.: 8,000/16,000/24,000/min.Orbit Diameter: 2.0mm.Pad Size: 93 x 185mm.Paper Size: 93 x 228mm.Weight: 1.9kg. The Makita DBO380Z LXT Brushless Finishing Sander comes as a Bare Unit, NO Battery or Charger. Supplied with: 1 x Punch Plate.1 x Dust Bag.1 x Abrasive Paper.
The Makita DBN600 LXT Finishing Nailer has been designed for second fix carpenters, cabinet makers and joiners. A handy rocker switch allows you to select between sequential and bump fire mode. Driving depth can be adjusted via the handy dial.The nailer is fitted with an ergonomically designed grip. For increased user safety there is an anti dry-fire mechanism. It also features an LED job light for visibility in dark work areas. Specifications: Magazine Capacity: 110.Fires: 16 Ga Nails, Length: 25-64mm.Shots Per Battery Charge: 800.Weight: 3.4kg. This Makita DBN600RTJ LXT Finishing Nailer is supplied with batteries included: Supplied with: 2 x 18V 5.0Ah Li-ion Batteries.1 x Pair of Safety Goggles.1 x Nose Adaptor.1 x Belt Clip.1 x 18V DC18RC Compact Charger.1 x MAKPAC Type 4 Connector Case.
Makita DAS180 LXT Dust Blower with a variety of tip nozzles, ideal for a wide range of applications from professional use to home use. Fitted with a brushless, maintenance-free and long-life motor. 4 stage air volume and variable speed control allow you to select the correct speed, whatever your need. An ergonomic handle provides increased comfort. A battery capacity warning function automatically notifies the user about reduction in battery capacity with the decrease of illuminance. The battery protection system automatically shuts off power when the battery level is low. Supplied with: 1 x Narrow Nozzle, 1 x Nozzle for cleaning filter, 1 x Blower Nozzle, 1 x Nozzle for inflating and 1 x Wide Nozzle. Specification: Max. Air Velocity: 0 - 200 m/s.Blowing Force: 0 - 1.1 / 1.7 / 2.3 / 2.8NAir Volume: 0 - 1.1 m³/min.Max. Sealed Suction: 103 mbarMax. Pressure: 0.297 bar
The Makita 18V Li-ion Battery provides the ultimate power to weight ratio thanks to the lightweight and shock-absorbing design. The Li-ion range delivers 430% more working capacity during the lifetime of the battery compared to NiCad and is 40% lighter than NiMH. The Li-ion has minimal depletion of power during use or in storage over its lifetime. Features: Foam cell technology. Slide-on battery, firm holding with multi contacts and shock absorbing pack. It will not puncture and remains cool even in heavy use. Makita have a comprehensive range of professional Lithium-ion tools available on the market, so whatever your trade, you will be confident that you have made the best choice. The Makita BL1830B 18V 3.0Ah Li-Ion Battery provides the ultimate power to weight ratio thanks to the lightweight and shock-absorbing design. The Li-ion range delivers 430% more working capacity during the lifetime of the battery compared to NiCad and is 40% lighter than NiMH. PLEASE NOTE this battery is supplied LOOSE. Specifications: Voltage: 18.Battery Type: Li-ion.Battery Ah: 3.0Ah.Weight: 610g.
The Marshalltown Swimming Pool Trowel has a hardened and tempered spring steel blade with round ends. The blade is flexible enough to bend to almost any radius. Its short aluminum alloy Xtralite mounting is lightweight but also extremely durable and is fitted to blade with 8 rivets. Its DuraSoft handle offers a soft feel, reduces fatigue and offers excellent robustness.
The Marshalltown Rock Warrior Utility Saw is intended for drywall and will cut almost any non-metallic material. Its high carbon steel blade is tempered and has a bevelled point. The blade cuts in both directions. Fitted with a sturdy, soft-grip handle for improved comfort.
The Marshalltown Round Bull Float Finishers Tote Kit includes: 1 x 48in Round End Bull Float 4 x 1.3/4in Round Handles to extend the reach of your Bull Float. 1 x Rock-It 2.0 Bracket. Gives you the convenience of full pitch control of the tool with a simple half turn of the handle. 1 x Tote Bag made from double-layer nylon with a reinforced base and stiffened side panels. It has an open-ended bracket window and outside cinching straps which hold all the kit compotents securely.
Marshalltown Concrete Rub Bricks are the best masonry tool for cleaning bricks as well as dressing down and removing form marks from concrete. The wide plastic handle allows for a comfortable hold and easy manoeuvring.
Marshalltown's Square Notched Trowel is perfect for tile, carpet or other floor covering insulation. Notches on the trowel allow you to spread and comb the adhesive into even lines of identical thickness. Creating gaps in the adhesive which allows the air to escape when a tile is pressed into position. Notch style and size help control the depth and amount of adhesive being applied. The blade is manufactured from stainless steel and is attached to an aluminium alloy mounting by rivets. Fitted with a resilient DuraSoft handle which provides a soft feel, reduces fatigue, and offers excellent durability. This Marshalltown Square Notched Trowel has the following specification: Notch Size: 3/8 x 3/8in.
Marshalltown's Square Notched Trowel is perfect for tile, carpet or other floor covering insulation. Notches on the trowel allow you to spread and comb the adhesive into even lines of identical thickness. Creating gaps in the adhesive which allows the air to escape when a tile is pressed into position. Notch style and size help control the depth and amount of adhesive being applied. The blade is manufactured from stainless steel and is attached to an aluminium alloy mounting by rivets. Fitted with a resilient DuraSoft handle which provides a soft feel, reduces fatigue, and offers excellent durability. This Marshalltown Square Notched Trowel has the following specifications: Blade Size: 11.1/2 x 4.1/2in.Notch Size: 1/4 x 1/4in.
The Marshalltown Walking Edger is made from heavy-duty zinc material which lasts longer than a standard steel blade and has ends which curl up to prevent gouging. The weight of the edger helps to eliminate any bending or warping when you're edging large areas of concrete. Specifications: Length: 9in.Width: 4in.Lip Depth: 5/8in.Lip Radius: 1/4in.
Marshalltown's Combo Screed is manufactured from lightweight aluminium. It has a dual-edge design, one side of the blade has a sharp edge for cutting and the other a round edge for floating concrete. The handle can be adjusted to the desired position for better comfort. Can be used as a screed, float or check rod.
These Knipex 71 72 Series Bolt Cutters have heavy-duty, oil-hardened chrome vanadium steel jaws. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. An eccentric bolt provides precise adjustment (12 positions). High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Bolted cutter head, replaceable. Ergonomically angled handles to minimise effort, fitted with sturdy non-slip, two-colour, multi-component handle sleeves. For added comfort, there is a forged-in stopper and a comfortable shock absorber. Its flat head/joint construction allows for improved access. The bolted cutter head is replaceable. Cutting Capacity: up to 48 HRC hardness. 1 x Knipex Bolt Cutter Multi-Component Grip 760mm (30in).
These Knipex 71 72 Series Bolt Cutters have heavy-duty, oil-hardened chrome vanadium steel jaws. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. An eccentric bolt provides precise adjustment (12 positions). High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Bolted cutter head, replaceable. Ergonomically angled handles to minimise effort, fitted with sturdy non-slip, two-colour, multi-component handle sleeves. For added comfort, there is a forged-in stopper and a comfortable shock absorber. Its flat head/joint construction allows for improved access. The bolted cutter head is replaceable. Cutting Capacity: up to 48 HRC hardness. 1 x Knipex Bolt Cutters Multi-Component Grip 610mm (24in).
These Knipex 71 72 Series Bolt Cutters have heavy-duty, oil-hardened chrome vanadium steel jaws. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. An eccentric bolt provides precise adjustment (12 positions). High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Bolted cutter head, replaceable. Ergonomically angled handles to minimise effort, fitted with sturdy non-slip, two-colour, multi-component handle sleeves. For added comfort, there is a forged-in stopper and a comfortable shock absorber. Its flat head/joint construction allows for improved access. The bolted cutter head is replaceable. Cutting Capacity: up to 48 HRC hardness. 1 x Knipex Bolt Cutters Multi-Component Grip 460mm (18in).
The Hultafors T Block Cross Pein Hammer is an ergonomically designed hammer which increases precision and reduces strain. The head is filled with steel ball bearings to dampen vibrations and reduce recoil. Fitted with an ergonomically designed handle affording good grip along the entire shaft. Counterweights in the shaft inhibit rotation.
The Hultafors USRA Safety Utility Knife is made with an ergonomic design for great grip, control and safety. A natural finger grip and tapered point provide excellent grip when cutting plasterboards. The blade is pulled back automatically when not under pressure. Helping to prevent injuries. Comes with 10 spare blades in a practical, springloaded dispenser which can also store old blades. Blades can be changed quickly and easily with no tool required. Specifications: Total Length: 160mm.Blade Length: 59mm.
