The Milwaukee VDE Slim Slotted Screwdriver is made from premium quality steel with molybdenum and vanadium for increased flexibility and lifetime. Its CNC milled tip provides high precision, the best fit and reduced cam-out effect. For increased grip and corrosion resistance, the tip has a black phosphate finish. Fitted with a 2-component handle with a soft grip for comfortable handling. Its three-sided design allows for maximum power transfer and reduced slippage. The slim handle design is ideal for low power/torque applications and fine electrical work, whilst the slim shank diameter allows access to low lying screw applications. Laser engraved with the reception on the top of the handle for easy identification. It also features an anti-roll, three-sided collar. VDE tested to 10,000V and guaranteed to 1,000V.
1 x Milwaukee INKZALL™ Liquid Paint Marker White. The Milwaukee Hand Tools INKZALL™ Liquid Paint Marker comes with xylene-free paint and a durable acrylic nib for the most demanding environmental conditions, working surface temperature from -10° up to ;145°. Metal outer barrel for construction site durability. The paint dries within 10 seconds, and the water and UV resistant markings last for up to 6 months. It marks on dark surfaces where traditional markers would not be easily visible and can be used on rough, dirty and greasy surfaces. For use on concrete, black pipe, aluminium, PVC, steel and stainless steel, rubber and tyres. IMPORTANT: Shake the marker with the cap on. Remove the cap and carefully pump it up and down until ink flows into the nib. White
The Milwaukee INKZALL Chisel Point Marker stays sharp, doesn't mushroom or push back under pressure. It has an acrylic nib, ideal for rough surfaces such as OSB and concrete. The ink has a quick drying time, which reduces the risk of smear markings on PVC and metal surfaces. Marker continues to write after 72and hours of cap off time. The thin body is ideal for use in restricted areas with an anti-roll design, so it won't roll off surfaces. With an easy-open cap for one-hand operation. There is also a handy helmet clip so it can be clipped to the construction site cap, trousers, overalls etc. and it also features a lanyard hole. Ideal for use on concrete, wood, metal, plywood, OSB and plastic. Can be used on wet, oily, dusty, rusty, with debris surfaces.
The Moore and Wright Digital Height Pre-Setter features a 2.5mm travel and automatically turns on when the surface is moved. Simple2 button design (On/Off and Set / mm/inch).IP65 rated.Powered by a CR2023 battery.
Moore and Wright Magnetic Digital Level with magnets on bottom measuring surface. Powered by a built in battery with Micro USB charging.IP65 rated. Specifications: Accuracy. ±0.2° (Tolerance Range). Range: 4 x 90°. Resolution: 0.05°.
TheMoore and Wright Digital Mini-Mag Level has a 360° measuring range in four quadrants of 90°.Embedded magnets on two sides allow you to keep the product stable on a magnetic surface.Powered by a standard 9V battery for ease of use. Specifications: Accuracy: ±0.2º. Resolution: 0.05º. Dimensions (LxHxW): 60 x 60 x 35mm
1 x Moore and Wright Digital Angle Rule 300mm.Specifications: Size: 300mm. Resolution: 0.05°. Functions: Hold function, on/off, zero-setting. The Moore Wright Digital Angle Ruleis easy-to-use thanks to its large LCD display and inside/outside angle measurement.Its stainless steel rule blades feature a mm scale.There is also a strong locking device. Specifications: Resolution: 0.05°. Functions: Hold function, on/off, zero-setting. 300mm
1 x Moore and Wright Digital Angle Rule 200mm.Specifications: Large LCD display Easy-to-use and strong lock device Inside and outside angle measuring Functions: Hold function, on/off, zero-setting Reversible reading Stainless steel rule blades with mm scale The Moore Wright Digital Angle Ruleis easy-to-use thanks to its large LCD display and inside/outside angle measurement.Its stainless steel rule blades feature a mm scale.There is also a strong locking device. Specifications: Resolution: 0.05°. Functions: Hold function, on/off, zero-setting. 200mm
1 x Moore and Wright Digital Protractor 300mm (12in). TheMoore Wright Digital Protractoris easy to use and hasstrong magnets on all blade edges to give a more accurate reading.Its hold function has a reversible reading and a large LCD. Specifications: Accuracy:±0.2°. Range: 360°. Resolution: 0.05°. 300mm (12in)
1 x Moore and Wright Digital Protractor 100mm (4in). TheMoore Wright Digital Protractoris easy to use and hasstrong magnets on all blade edges to give a more accurate reading.Its hold function has a reversible reading and a large LCD. Specifications: Accuracy:±0.2°. Range: 360°. Resolution: 0.05°. 100mm (4in)
1 x Moore and Wright Digital Protractor 200mm (8in).Specifications: Size: 200mm (8in). Accuracy: ±0.2°. Range: 360°. Resolution: 0.05°. TheMoore Wright Digital Protractoris easy to use and hasstrong magnets on all blade edges to give a more accurate reading.Its hold function has a reversible reading and a large LCD. Specifications: Accuracy:±0.2°. Range: 360°. Resolution: 0.05°. 200mm (8in)
This Moore and Wright Dial Caliper has the following specifications: Range: 0-300mm. Accuracy: ± 0.03mm. Resolution: 0.02mm. TheMoore Wright Dial Calipermakes measurement easy with a simple, shockproof adjustable dial for quick and convenient zero setting. Made of Stainless Steel with a blue anodized bezel. 300mm
This Moore and Wright Dial Caliper has the following specifications: Range: 0-200mm. Accuracy: ± 0.02mm. Resolution: 0.02mm. TheMoore Wright Dial Calipermakes measurement easy with a simple, shockproof adjustable dial for quick and convenient zero setting. Made of Stainless Steel with a blue anodized bezel. 200mm
This Moore and Wright Dial Caliper has the following specifications: Range: 0-6in. Accuracy: ± 0.001in. Resolution: 0.001in. TheMoore Wright Dial Calipermakes measurement easy with a simple, shockproof adjustable dial for quick and convenient zero setting. Made of Stainless Steel with a blue anodized bezel. 6in
This Moore and Wright Dial Caliper has the following specifications: Range: 0-150mm. Accuracy: ± 0.02mm. Resolution: 0.02mm. TheMoore Wright Dial Calipermakes measurement easy with a simple, shockproof adjustable dial for quick and convenient zero setting. Made of Stainless Steel with a blue anodized bezel. 150mm
This Moore and Wright IP54 Water-Resistant Digital Caliper has the following specifications: Range: 0-300mm (0-12in). Accuracy: 0.04mm. Resolution: 0.01mm (0.0005in). Jaws: 60mm. Moore Wright Water Resistant Series Digital Callipers are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch, absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch.Manufactured to DIN 862 standards, and are water and dust resistant to IP54 specifications.Supplied with a CR2032 battery. 300mm (12in)
ThisMoore and Wright IP54 Water-Resistant Digital Caliper has the following specifications: Range: 0-200mm (0-8in). Accuracy: 0.03mm. Resolution: 0.01mm (0.0005in). Jaws: 50mm. Moore Wright Water Resistant Series Digital Callipers are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch, absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch.Manufactured to DIN 862 standards, and are water and dust resistant to IP54 specifications.Supplied with a CR2032 battery. 200mm (8in)
The Makita RP001G XGT 40Vmax BL 1/2in Router as a powerful brushless motor providing consistently smooth cutting. Fitted with a soft brake, this gently stops the machine reducing the risk of damage to the material you're working on. A LED work light with both pre-glow and after glow functions keeps the work area illuminated. Compatible with the Auto-Start Wireless System (AWS), connects to compatible dust extractors via Bluetooth. The dust extractor automatically runs while the switch is on. Supplied as a Bare Unit - No Battery or Charger. Comes with: 1 x Dust Nozzle, 1 x Holder Assembly, 1 x Accessory Set, 1 x Rod 8, 1 x Straight Guide, 1 x Chip Deflector and 1 x MAKPAC Type 4 Case. Specifications: Collet: 1/2in. No Load Speed: 8,000 – 25,000/min. Plunge Capacity: 0-60mm. Base Diameter: 150 x 130mm. Weight: 3.3kg.
The Makita DHP453 LXT Combi Drill has a single sleeve keyless drill chuck for easy bit installation/removal. The combi drill has compact, lightweight design with high comfort grips for easy handling. The 2-speed gearbox features metal gears for increased durability and long service life. It offers easy control, even in difficult applications thanks to its conveniently located push-button for forward and reverse. Comes as a Bare Unit, No battery or charger supplied. Specifications: No Load Speed: 0-400/0-1,300/min. Impact Rate: 0-6,000/0-19,500/bpm. Max. Torque: 42Nm, Settings: 16 and Drill. Capacity: Masonry 13mm, Steel 13mm, Wood 36mm. Weight: 1.7kg.
The Liberon Furniture Brush made for buffing wax polishes on finished furniture. Made with high quality, pure soft bristles which won't scratch finished surfaces. The curved shape reduces the chance of knocking furniture while the tapered ends allow access to tight corners and around chair legs.
The 45 Knipex Insulated Twin Wire Ferrules by DIN colour code. Supplied in a practical dispenser box with rotating lid, complete with opening to remove individual wire ferrules. Format: Ø 90mm, height 44mm. Contents: 20 Wire Ferrules 2 x 4mm², 10 Wire Ferrules 2 x 6mm², 10 Wire Ferrules 2 x 10mm², 5 Wire Ferrules 2 x 16mm².
200 Piece Knipex Insulated Twin Wire Ferrules by DIN colour code. Supplied in a practical dispenser box with rotating lid, complete with opening to remove individual wire ferrules. Format: Ø 90mm, height 44mm. Contents: 50 Wire Ferrules each for 2 x 0,75mm² / 2 x 1mm² / 2 x 1,5mm² / 2 x 2,5mm².
Knipex Crimping Pliers built for quick cutting and stripping of data cables in telecommunication and networks. The adjustable retaining bracket is suitable for all common RJ45 plugs with closed and non-closed housings. With a separate crimping die for strain relief (cable clip). Provides precise crimping process thanks to parallel crimping. There is also a ratchet mechanism (unlockable), ideal for repetitive crimping without sacrificing quality. Fitted with multi-component grips. Force is magnified by lever action to ensure fatigue-free working. Specifications: Capacity:RJ45 (8-poles). Overall Length: 190mm.
The Knipex Crimping Pliers made for cutting cables, stripping wire and crimping insulated terminals, heat shrinkable sleeve connectors and non-insulated crimp terminals according to DIN 46234. There are also threaded holes for cutting copper and brass screws threaded M2.6, M3, M3.5, M4 and M5. The handles are fitted with multi-component grips for increased comfort. A bolted joint provides higher stability and even movement. Specifications: Capacity: 0.5-6.0mm². Number of Crimp Profiles: 3. AWG:20-10. Overall Length: 240mm.
Knipex VDE StepCut XL Cable Shears have a large cutting capacity and provide noticeably easier cutting than compact cable shears. The cutting edges additionally laser-hardened, cutting edge hardness approx. 56 HRC. With dual cutting areas: the stepped cutting edge holds small and larger cables close to the joint during the cut; the front cutting edge cuts very large cables step by step. They offer easy one or two-handed operation with minimum handle opening for large cable diameters. The adjustable, high-leverage bolted joint provides precise and smooth cutting. Fitted with VDE multi-component grip. VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. A pinch guard prevents operators' fingers being pinched. NOT suitable for steel-reinforced cables, e.g. ACSR. Specifications: Cutting Capacity: Solid Copper or Aluminium Cables: 35mm², Stranded Cables: 70mm²and Fine Stranded Cables: 120mm². Overall Length: 225mm.
Knipex Anvil Shears made with opening spring and locking device. For cutting soft materials without damage, e.g. rubber profiles, PVC, leather, wood, hoses etc. Specifications: Blade Length: 40mm. Cutting Capacity: Round Material up to Ø 25mm. Flat Material max. width of 40mm and height of 7.5mm. Overall Length: 200mm.
The Knipex Tile Breaking Pliers built for the precise cutting (breaking) of tiles and porcelain stoneware after scoring with a tile cutter. They can easily be adjusted to the required tile thickness at the press of a button. Provides a great crushing force thanks to a10-fold increase of manual force. The positioning jaw is made from soft, stable plastic, this helps to prevent damage.
The Knipex Revolving Punch Pliers with six interchangeable punches. Use to punch holes into leather, textiles and plastic material. Powder-coated for reliable protection against rust. Fitted with an opening spring and locking device for ease of use. Specifications: Punch Ø: 2.0, 2.5, 3.0, 3.5, 4.0, 5.0mm. Overall Length: 220mm.
The Knipex TubiX S Pipe Cutter has been designed for pipe cutting in the tightest spaces. It has a very small cutting circle and a QuickLock one-hand locking mechanism for independent holding and clamping on the pipe. Fits in your pocket and cuts stainless steel. Cuts pipes with Ø 3 – 30mm (1/8 – 1 1/8in) with wall thicknesses up to 2mm. The cutting wheel made of high-grade ball-bearing steel. Both the cutting wheel and guide rollers feature high-quality needle bearings. Pipe diameter can be preset with the scale and clipped on to the pipe by spring-loaded cutting wheel. Its optimised turning knob with textured thumb recess provides 20 % higher torque and prevents slipping, even in wet conditions.The cutting wheel is easy to change,a spare wheel is stored in the turning knob.
The Knipex 90 25 25 Pipe Cutter cuts aluminium composite and plastic conduit pipes more easily than conventional shears with a fixed blade. Also suitable for composite pipes with increased aluminium layer thickness (e.g. Geberit Mepla). Wide plastic supports allow perfect right-angled cuts. Up to 60% less effort required when cutting. The freely rotating cutting wheel allows the pipe to be rotated with minimal friction when cutting.Optimum cutting results. The rotation allows the cutting wheel to penetrate the pipe effortlessly with minimal deformation. Fitted with ergonomic, multi-component handles for added comfort. There is also a locking mechanism for safe transport. Specifications: Cutting Capacity: Plastic and Composite Pipes: Ø 26mm.
The Knipex Cobra XS Water Pump Pliers made with one-handed fine adjustment (11 positions), just push for the simplest adjustment for different workpiece sizes. Self-locking on pipes and nuts, no slipping on the workpiece and low handforce required. A pinch guard prevents operators' fingers being pinched. The gripping surfaces feature special hardened teeth, hardness approx. 61 HRC, which are highly resistant to wear and provide stable gripping. Designed to offer optimum accessibility, even in confined spaces thanks to a compact design and very slim head. Specifications: Overall Length: 100mm. Capacity: Nuts: 24mm, Pipe: Ø 28mm.
