The Faithfull Sound Level Meter is a compact digital tool for recording noise levels. It can be used to measure the sound level in all kinds of environments, such as factories, schools, offices, traffic, roads etc.Features include over-range indication, Max./Min. measurement mode, data hold, low battery indication, auto power-off and more. Sound level meters are instruments designed to react to the noise much like the human ear. The measurements taken by sound level meters are compared to known standards to identify whether the noise level could have a detrimental effect on humans located near the noise source.It is supplied with a removable wind noise reducing cap, batteries and user manual.Display: 4 digits LCD with backlightFrequency Weighting: AMeasuring Range: 30 dB - 130 dBFrequency Range: 30Hz~8kHzResolution: 0.1 dBAccuracy: ±1.5 dBOver-range Indicator: "OL" appears when the measured value is higher than the upper limit of the measuring range. "LO" appears when the measured value is lower than the lower limit of the measuring range.MAX./MIN. Measurement ModeTime Weighting: FAST mode and SLOW mode Microphone: Omni-directional Condenser MicrophoneOperating Altitude: <2000m above sea levelOperating Environment: 0-40°C, 20%-30%RHStorage Environment: -10°C to 50°C, <90%RHPower: 3 x 1.5V AAA batteries (supplied)Size: 160 x 54 x 32mmWeight: approx. 110g (including battery)
Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1458T Large Force Cup Plunger 120mm (4.3/4in)
The Gorilla Tub Bucket is strong yet flexible bucket in an easy to find Hi-Viz yellow colour. It is ideal for building site and construction for moving materials in tight spots, it can easily be lifted by the thick steel handle with a comfort plastic grip. It features reinforced ribbing for extra strength and is frost and UV ray resistant. Its thicker walls make it great for carrying rubble or sand, and perfect for mixing and pouring with. Dried mix can be knocked out, so it can be used time and time again. Capacity 22 Litres.
The Faithfull PDRWCAUG toilet auger is designed for the fast unblocking of toilets, this safe and easy to use auger utilises a flexible spring steel shaft with a barrel end that can be rotated to clear away blockages in toilet U bends and gullies. The auger features a vinyl sleeve that helps protect the toilet bowl from scratches and has a handy clip for storing the spring steel shaft when not in use. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.
Bahco 239 Junior Saw is a wire framed junior hacksaw with an orange lacquered finish. Fitted with a 32 tpi blade for metal cutting. Blade length: 150mm (6in).
Blue Spot 01535 1/4 and 3/8 in Drive metric and AF socket set 40 piece consisting of:-12 x 1/4 Hex sockets 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32 and 1/2 AF.13 x 1/4 Hex sockets 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12 and 13mm.3 x 1/4 8 Pt sockets 1/4, 5/16 and 3/8 in1 x 1/4 Spinner handle 6 in1 x 1/4 to 3/8 Adaptor3 x 3/8 Hex sockets 7/16, 9/16 and 1/2 AF3 X 3/8 Hex sockets 11, 12 and 13mm 1 x 3/8 Reversible ratchet handle.1 x 3/8 Extension bar 3 in1 x 3/8 Spin disc1 x moulded case
STANLEY CUSHION GRIP Screwdrivers are constructed with an ergonomic, bi-material handle. The unique 8-sided octagonal handle shape allows better grip, control and torque transfer. The blades are engineered from high-strength, chrome vanadium steel to reduce the chance of tip breakage. Manufactured to the strictest standards and specifications. Suitable for demanding high torque applications. This 6 piece set contains: 3 x Slotted Screwdrivers: 3 x 100mm, 4.0 x 100mm, 5.5 x 100mm. 3 x Phillips Screwdrivers: PH0 x 60mm, PH1 x 100mm, PH2 x 100mm.
The STANLEY CONTROL-LOCK Pocket Tape has a double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears. Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements. There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 3.5 metres helps you to measure confidently from a distance, even when working alone. Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt. Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. Available with metric only or metric and imperial graduations.The STANLEY CONTROL-LOCK Pocket Tape has metric graduations only.A double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears.Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements.There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 5 metres helps you to measure confidently from a distance, even when working alone.Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt.Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. Important, this pocket tape has metric graduations only. Specifications: Blade Length: 5m.Blade Width: 25mm.Accuracy: EC Class II.
The Faithfull Plastic Debris Shovel is ideal for fast-moving of wood chips, rubble, farm waste, grain, compost, snow etc.This lightweight multipurpose shovel has a large impact-resistant plastic scoop with reinforcing ribs and deep sides. The plastic scoop does not create sparks when dragged across a concrete floor, making it a safe choice for use with flammable materials.Fitted with an FSC® European ash wood shaft and plastic D-handle. Specification:Overall Length: 1200mm (48in).Blade Size: 360 x 460mm.
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 4 Thor split head hammers .Face diameter 50mm (2 in)
The Stanley Moulded Body Surform® Flat File for use on all types of wood, aluminium, plastic, copper and laminates. It has a lightweight plastic moulded body. The slight curve on the 140mm (5.1/2in) blade is for increased stock removal and it can be used on push or pull stroke. The blade can be changed without the use of additional tools, simply click on. Overall Length: 335mm (13in).
Hardened, tempered and sharpened flat blade for efficient performance. Nickel plated for protection against rust. Virtually unbreakable plastic handle, textured for improved grip. The blade shaft is cranked to prevent it turning in the handle. Size: 1.1/4inTip size: 3/32in
6 piece needle file set with high carbon blades for strength and durability. All are 160mm in length. Contains: 1 x flat, 1 x flat tapered, 1 x half round, 1 x round, 1 square and 1 three sided (triangle).
Stanley 10-598 attractive, epoxy coated, die-cast, metal body, folding pocket knife with a simple spring mechanism which enables the blade to be locked securely in the extended position or stored safely within the body of the knife. Supplied with 2 x 5901 blades. Spare blade contained in the handle.
The Stanley Tools FatMax® Premium Pocket Knife has a heavy-duty design with a stainless steel combination blade with both serrated and straight edges for cutting various materials. It also provides increased durability and corrosion resistance. The slim lightweight aluminium handle provides improved comfort. Other features include a tether loop for increased security and a bottle opener.
The Roughneck VRS Claw Hammer can be used for general carpentry work and other home uses. The curved claws are ideal for prying, levering and nail pulling. VRS hammers have a high-quality satin finish and double injected soft grip handles for comfort. They feature a unique 2-piece 'vibration reduction system' for strength and durability. The patented 'VRS' technology reduces vibration transmitted to the hand, making it easier and safer to work with the hammer for long periods of time. Weight: 397g (14oz).
The Metabo TS254 Table Saw uses a powerful motor with electronic overload protection and a motor brake that stops the blade quickly, within 3 seconds, for increased user safety. There is also a restart protection function that prevents unintentional start-up after power supply interruption and soft start function for long service life of motor and drive. Its easy to change the saw blade thanks to the spindle lock. There is also a dual port dust extraction for low dust emission. Fitted with a precise parallel guide with double clamping and quick fastening for rapid, acurate cuts. The gear guide allows for precise saw blade inclination with automatic resetting to 0–45° after undercuts. With precise, extendable table width extension for extra large working surfaces. The splitting wedge can be lowered without tools for hidden cuts and transport. Has an extremely lightweight design with trolley function for increased mobility. The integrated stand is made from stable die-cast aluminium and can be unfolded in a matter of seconds, with secure positioning. When folded, it is extremely compact making it easy to transport on a van, ect. There is also a second working height for working near ground level. Its anti-twist tubular frame construction meets the highest building site demands and all the cables and add-on components can be stored on the casing for transport. Supplied with: 1 x Carbide Saw Blade, 1 x Push Stick, 1 x Stand, 1 x Set of Hard Rubber Tyres, 1 x Parallel Guide /Rip Fence, 1 x Mitre Fence, 1 x Table Length Extension, 1 x Right Table Width Extension, 1 x Saw Blade Case and 1 x Chip & Dust Extraction Unit. Specification Input Power: 2,000 Watt.No Load Speed: 4,200/min.Cutting speed: 56 m/s.Max Cutting height (90/45°): 87/50mm.Saw blade: Ø 254 x 30mm.Table size: 670/970 x715/995mm.Weight: 33.4kg.
Monument Drill Snake is encased in a plastic tube that remains stationary as the snake is rotated by the electric drill. It is fitted with an automatic clutch that slips if the boring head gets caught in the line. Effective length: 4.5m (15ft).
Monument Handy Plunger for clearing small basins, bath and shower wastes. Exclusive patented bellows design allows more cubic centimetre displacement than traditional force cups. Size: 100mm (4in).Length: 325mm (13in).
Monument Master Plunger for removing blockages from pipes by building up pressure. With patented bellows to give more displacement than traditional force cups. Easily cleaned and has a removable handle.This plunger is ideal for bath and sink waste pipes. Size: 125mm (5 in).
These Faithfull Woodcarving Chisels have wooden handles, deep seated tangs, brass ferrules and fully polished blades. Gouges are designed with a concave blade to remove wood without causing splintering. The depth of the curve or sweep determines the depth-of-cut. Please Note: Woodcarving chisels will require final sharpening prior to their first use.The FAIWCARV4 Woodcarving Chisel has the following specifications: Type: Straight gouge. Size: 25.4 mm (1 inch). Handle: Hardwood.
Faithfull TORX (Star) Screwdrivers are manufactured from high-quality, correctly hardened and tempered S2 steel. With precision machined tips to provide an optimum fit helping to prevent cam-out and screw stripping. The tips are magnetised to aid screw retention with a black phosphate finish to help provide a long working life. Each screwdriver features a full size bi-material, textured non-slip, soft grip handle for maximum user comfort and ease of use, with a drive icon displayed on the end for easy identification. Contains one of each size, all 100mm long: TX10, TX15, TX20, TX25 & TX30.
All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : Black.Size : 89 mm (3.1/2in).Weight : 1.1 kg (40oz).Face : 89 mm.
The Faithfull Pick Up Tool Set comprises of one pick up tool with a magnetic end and one with an expanding and retractable claw. Both have flexible shafts for access in to tight spaces. Overall Length: 610mm (24in).
Faithfull line holders for use with external building profiles. Help to ensure quick and accurate bricklaying. Building profiles are easy to set up and simple to use. Pack of 4.
Faithfull Paint Markers can write on virtually any surface including timber, concrete, ceramics and metals. The paint is quick-drying, Xylene free and UV resistant. Suitable for outdoor use.1 x Pack of 2 Faithfull Paint Marker Pens Yellow & Red
3 Piece Faithfull Pliers Set with the most popular selling pliers for everyday use. Manufactured from chrome vanadium steel and fitted with soft grip, non-slip handles for safety and comfort. These pliers meet tough GS standards and are suitable for both the trade and home user. Contents: 1 x Handyman Combination Pliers 180mm (7in), designed to grip and cut. The front section of the serrated jaws are ideal for gripping flat surfaces and the serrated sections match the profiles of rods, pipes and tubing. The induction hardened jaws are suitable for cutting a wide range of materials including medium and medium-hard wire. 1 x Handyman Diagonal Cutting Pliers 160mm (6.1/4in), for cutting medium to medium-hard wire close to the flat surface. The tapered head profile is ideal for accessing confined spaces. Induction hardened jaws and cutting edges are individually processed for maximum performance. 1 x Handyman Long Nose Pliers 165mm (6.1/2in), with serrated jaws to maximise grip and tapered to a fine end for accessing and the manoeuvre of small objects in confined spaces.
The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured. Replacement blades available. Blade length: 150mm (6in).
The Faithfull Auto Start Blow Torch is a high temperature, all-purpose gas torch designed for home use. The blow torch has an automatic piezo ignition, fine flame adjustment valve and a rapid one minute warm up. It also has a highly ergonomic, shock-resistant polypropylene handle, making it comfortable to use. Suitable for use with Faithfull Tools Butane Propane Mix Gas Cartridges Part nos. FAIGZ350, FAIGZ170 (Not included). Supplied with a stability base. Applications: Soft Soldering.Aluminium Welding.Paint Stripping.Pipe Bending.Loosening Bolts.Defrosting Pipes.Brazing.Lighting Barbecues. Specifications: Max. operating temperature: 1600°C.Optimum power output: 1,230 Watts.Gas consumption: 88 g/h.EN417 Connection.
A Faithfull small pocket sized damp and moisture meter that can be used to measure the moisture content in timber, paper, cardboard and hard materials such as mortar, concrete and plaster. The moisture content is displayed as a percentage reading on the LCD digital display that is equipped with a backlit function for use in dark environments. The meter can also be used to measure the ambient temperature and is compact, portable and easy to use. The meter is supplied in with a probe cover for safe storage when not in use. Features:Clear easy to read LCD display.Accurate moisture measurement.Works on hard and soft materials.Auto power-off.Low battery indication.4 x LR44 Batteries included. Probe cover for safe storage. SPECIFICATION: Measurement Range:Wood: 6-42%, Material: 0.2-2.0%, Temperature: 0-40°C.Resolution:Wood: 1%, Material: 0.1%, Temperature: 1°C/2°F.
The Faithfull Contract Adjustable Spanners have a ring spanner built into the handle. The drop forged construction and the moulded soft-grip handle combine strength with comfortable use. The adjustable jaw enables each wrench to be used on a number of different sized nuts or bolts.Jaw Capacity: 25mm Size 150mm (6 in)
These Dormer 2 piece sets each feature a tap and its corresponding pre-hole drill in one convenient package, helping to save time and error.The packs contain an A002 split-point jobber drill and a straight flute tap. The taps are suitable for threading up to 1.5x their diameter in most materials (ISO Standard). Two tap options are available: Second tap for through drilling, or a bottoming tap for blind holes.Specifications: Tap Type: SecondThread Size: M6
The DEWALT DCV100 XR Compact Jobsite Blower has a compact and lightweight design that is ideal for jobsite clean-up. Variable speed slider switch with variable speed trigger and a lock-on/off switch for improved control. Supplied with inflator/deflator attachments for versatile applications. Bare Unit, No Battery or Charger Supplied. Specification Max Airflow: 80m/sec.Air Speed: 18,000/min.Weight: 1.3kg.
