The ITL Insulated Linesman 240mm Pliers made with a large jaw. Ideal for gripping round and flat surfaces, includes a cutter for soft, hard and piano wire. Also includes a crimper. Fitted with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Combination Pliers, 250mm, are made for gripping flat and round material. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL 10 Piece Insulated 3/8in Drive Metric Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 8 x Metric Sockets: 8, 10, 12, 13, 14, 17, 19, 22mm. 1 x Extension Bar 127mm (5in). 1 x 3/8in Drive Torque Wrench 12-60Nm.
The ITL 10 Piece Insulated 1/2in Drive Imperial Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 8 x Imperial Sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 11/16, 3/4, 7/8in AF. 1 x Extension Bar 127mm (5in). 1 x 1/2in Drive Torque Wrench 12-60Nm.
This ITL 10 Piece Insulated 1/2in Drive Metric Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 8 x Metric Sockets: 8, 10, 12, 13, 14, 17, 19, 22mm. 1 x Extension Bar 127mm (5in). 1 x 1/2in Drive Torque Wrench 12-60Nm.
The ITL 7 Piece Insulated 1/2in Drive Imperial Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 5 x Imperial Sockets: 3/8, 7/16, 1/2, 5/8, 3/4, 1in AF. 1 x Extension Bar 127mm (5in). 1 x 1/2in Drive Torque Wrench 12-60Nm.
The ITL 29 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a case, contains: 7 x Metric Spanners : 10, 11, 12, 13, 14, 17, 19mm. 7 x 1/2in Drive Metric Sockets: 10, 11, 12, 13, 14, 17, 19mm. 1 x 1/2in Reversible Ratchet. 2 x 1/2in Extension Bars: 125, 250mm. 1 x Coring Knife. 2 x 8in Pliers : Combination, Snipe Nose. 1 x 6in Diasgonal Cutting Pliers. 2 x 1/2in Drive Hex Key Sockets: 5, 6mm. 2 x Terminal / Slotted Screwdrivers: 3 x 75mm, 4 x 75mm. 2 x Slotted Screwdrivers 5 x 150mm, 8 x 150mm. 2 x Pozidriv Screwdrivers: PZ1 x 75mm, PZ2 x 100mm.
ITL 9 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a tool roll, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Cable Cutters 200mm (8in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Phillips Screwdrivers: PH1 x 75mm, PH2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm.
The ITL 20 Piece Insulated Deluxe Tool Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Diagonal Cutters 150mm (6in). 1 x Cable Cutters 200mm (8in). 1 x Groove Joint Pliers 250mm (10in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Pozidrive Screwdrivers: PZ1 x 75mm, PZ2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm. 4 x Open Ended Spanners: 13, 17, 19, 24mm. 3 x Offset Ring Spanners: 13, 17, 19mm. 1 x Coring Knife.
Hultafors Permanent Markers will adhere to almost any material. Alcohol-based ink, with a round tip allowing for precision marking. Made in Sweden with environmentally friendly materials . This set includes four colours: blue, red, green and black, for high readability regardless of the colour of the surface.
The Hultafors Stainless Steel Brick-Mate Tape has a unique blade design with three scales to calculate brick and block quantities and course heights, along with a conventional metric scale accurate to EC Class I. The blade is made from durable stainless-steel tape and fitted with a strong stainless-steel end-hook with a reinforcement plate. The ergonomic ABS case has a non-slip rubber grip pad and easy-to-operate positive action lock, minimising blade slip. With a bump stop for added blade and end-hook protection, and a metal clip for attaching a lanyard when working at heights. Made in Britain. Accuracy: EC Class I.
The Hultafors Wooden Folding Rule is traditionally manufactured from downy birch with Swedish steel joints for thin sections and great flexibility. A metric scale in black appears on both sides, and red decimetre figures. Type approved as per EU Class III. Coated with a water-based protective lacquer for increased resistance to dirt and moisture. The joints are heat-treated, coated and oiled at three points to ensure first-class performance. Each folding rule section is checked twice during the production process using high-speed cameras. A Hultafors classic – a must for every craftsman.
The Fiskars Functional Form ReNew Universal Scissors are made from recycled materials (minimum 70%) for unique comfort and cutting performance. Its durable, recycled (~80%) stainless steel blades are precision ground for long-lasting sharpness. The ergonomically designed handle is made from a mix of recycled (~80%) plastic (80%) and fiberglass (20%). Ideal for a wide variety of tasks around-the-home. Can be washed in a dishwasher. Made in our factory in Finland with an environmental protection certificate. Completed and tested by hand. Supplied in plastic-free packaging can be easily recycled. Specification: Length: 21cm.
1 x Faithfull FSC Straight Gouge Carving Chisel 9.5mm (3/8in). The Faithfull Straight Gouge Carving Chisel comes with wooden handle, deep seated tang, brass ferrule and fully polished blade. Gouges are designed with a concave blade to remove wood without causing splintering. The depth of the curve or sweep determines the depth-of-cut. This product is made with FSC 100% Certified Wood from well-managed forests.Please Note: Woodcarving chisels will require final sharpening prior to their first use. 9.5mm (3/8in)
Faithfull Plasterers Orange Jointing Tapefor covering plasterboard joints and repairing cracks prior to plastering.It uses a high-tac adhesive. Ideal for plastering and patching. Performs from -10°C to 70°C.
The 8 Piece Faithfull Box Spanner Set.Includes 16 of the most popular sizes used by both tradesmen and home users and is ideal for use on recessed, deep set or otherwise hard-to-reach nuts and bolts.Each spanner is manufactured from durable steel piping and is plated with a bright coating to protect against corrosion. Great for a range of automotive repair jobs and plumbing maintenance work. This set is supplied in adurable nylon storage roll. Contains: 1 x 6mm and 7mm Box Spanner. 1 x 8mm and 9mm Box Spanner. 1 x 10mm and 11mm Box Spanner. 1 x 12mm and 13mm Box Spanner. 1 x 14mm and 15mm Box Spanner. 1 x 16mm and 17mm Box Spanner. 1 x 18mm and 19mm Box Spanner. 1 x 20mm and 22mm Box Spanner. 1 x Tommy Bar.
TheFaithfull FSC Marking Knife has adiamond shaped blade, bevelled on one side only. Allowing the flat side close contact with a straight edge or cutting guide when laying out particularly across the grain of the wood. Fitted with a hardwood handle and brass ferrule. FSC-certified wood is used in the manufacture of this product. Wood products with FSC certification undergo a rigorous set of environmental, social, and economic requirements to be considered sustainable and responsibly sourced.Length: 175mm (7in).
The Faithfull Teflon Foam Gun is a high-quality foam gun designed for installing door and window frames, filling and sealing cavities and joints, sealing pipe or cable penetrations in walls, and sealing joints in wall insulation sheets.The gun is compatible with standard 500ml and 750ml gun grade Polyurethane pressurised expanding foam canisters. It features a spring trigger mechanism with micro-fast foam flow adjustment, to give the user precise control over the foam output, this means greater accuracy and reduced waste on the job.The barrel of the gun is hermetically sealed upon trigger release, preventing the foam from hardening inside the gun. The gun also benefits from a fully coated non-stick body, and needle and canister fitting valve, and a stainless steel barrel, making cleaning a breeze.
The Faithfull Long Barrel Foam Spurt Gun is a high-quality foam gun designed for installing door and window frames, filling and sealing cavities and joints, sealing pipe or cable penetrations in walls, and sealing joints in wall insulation sheets.The gun is compatible with standard 500ml and 750ml gun grade Polyurethane pressurised expanding foam canisters. It features a spring trigger mechanism and flow adjuster knob, to give the user precise control over the foam output, this means greater accuracy and reduced waste on the job.The barrel of the gun is hermetically sealed upon trigger release, preventing the foam from hardening inside the gun. The gun also benefits from an extra-long 500mm barrel for hard to reach places, and a stainless-steel needle to help make cleaning easier.
The Faithfull Foam Spurt Gun is a high-quality foam gun designed for installing door and window frames, filling and sealing cavities and joints, sealing pipe or cable penetrations in walls, and sealing joints in wall insulation sheets.The gun is compatible with standard 500ml and 750ml gun grade Polyurethane pressurised expanding foam canisters. It features a spring trigger mechanism and flow adjuster knob, to give the user precise control over the foam output, this means greater accuracy and reduced waste on the job.The barrel of the gun is hermetically sealed upon trigger release, preventing the foam from hardening inside the gun. The gun also benefits from a stainless-steel needle and barrel to help make cleaning easier.
The Einhell TP-HD 18/26 Li BL-Solo Power X-Change Rotary Hammer is a real all-rounder. It combines four functions in one device: drilling, hammer drilling and chiselling with and without fixing. These functions can be adjusted with the aid of a central position switch. The device is powered by the powerful Einhell PurePOWER brushless motor. This brushless motor offers more power and longer running time than conventional carbon brush motors. After online registration, there is a 10-year warranty on the brushless motor. The speed can be finely metered depending on the material and feed. A universal SDS-Plus tool holder with semi-automatic operation allows for quick and simple tool changes. Operation is pleasant and fatigue-free thanks to the ergonomic handle area with softgrip. The anti-vibration handle protects from vibrations to ensure precise work. There is also a robust drill depth stop for exact drill holes is infinitely adjustable andLED light for optimally lighting your working area. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. Supplied in a practical E-Box transport and storage case. Specifications: No Load Speed: 1,200/min. Impact Rate: 5,500/bpm. Impact Energy: 2.6 Joules. Max. Drilling Diameter: Concrete 26mm, Steel 13mm. Weight: 3.04kg.
The Einhell TE-VC 18/10 Li-Solo Power X-Change Wet and Dry Vac is highly versatile, it can be used in a wide variety of environments, home, workshed, basement or garage. Thanks to its wet or dry vacuuming capabilities. There is also a blow connection which is for blow-cleaning hard-to-reach areas. The intelligent position of the On/Off switch enables convenient one-hand operation. For comfortable working with low noise the motor is quiet in operation. Ergonomically designed with a carry-handle for easy transportation. The included accessories can be conveniently stowed away directly on the equipment. The container has quick-release fasteners for emptying in a flash. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. Supplied with:1 x Extendible Hose 2m, 1 x 2-in-1 Crevice/Brush Nozzle, 1 x 2-in-1 Upholstery/Universal Nozzle, 1 x Dirt Collection Bag and 1 x Foam Filter. Specifications: Capacity: 10 litre. Suction Power: 90 mbar. Sound Pressure Level (Volume): 72 dB (A). Suction Hose Diameter: 36mm. Suction Hose Length: 2m. Weight: 3.05kg.
The Einhell TE-TS 36/210 Li-Solo Power X-Change Table Saw can be used to cut soft and hard wood. Its sturdy aluminum table is lightweight, torsion-resistant and has perfect sliding properties. For wider workpieces, the table has extendable extensions on the right. A softstart function protects the engine and also the transmission from false starts. The infinitely variable height adjustment of the saw blade ensures safety in use. There is also an extremely stable parallel stop to ensure precise longitudinal cuts. Its compact design allows it to beintegrated into small workshops or hobby cellars and is also ideal for mobile use. Included in the delivery is an angle stop for accurate mitre cuts from -60 to and60° degrees. The mitre blade can be tilted steplessly to the left by 45°. Suction connections on the housing and saw blade guard ensure a clean, dust-free and flour-free workplace. Holders on the housing are used to store all attachments on the device. Supplied with ahigh-quality HM saw blade, which was specially developed for cordless saws. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. This table saw needs 2 x 18V batteries to run. Specifications: No Load Speed: 3,800/min. Cutting Height: 70mm. Max. Ripping Capacity: Right 625mm. Angle Stop (Min./Max.) -60° / 60°. Blade Diameter: 210mm. Weight: 13.15kg.
The Einhell TE-SY 18/90 Li-Solo Power X-Change Paint Spray Systemis ideal for painting and varnishing jobs. Suitable for medium to large areas thanks to the 1,200ml paint container and the high delivery rate of up to 1000 ml/min. Various liquids with a maximum viscosity of 90 DIN-sec can be used. For optimal application of varnishes and glazes, the amount of paint can be regulated directly on the handle using a rotary wheel. The adjustable amount of air determines the width of the paint jet. The adjustable air cap allows you to work with both vertical and horizontal or circular jets. The paint spray system is pleasant to use thanks to the separate blower station, the shoulder belt and the 1.8 m long air hose. Thanks to the hinged cover, the inserted battery is protected against contact with liquids, dirt or paint splashes. The spray head can be completely removed for easy cleaning. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. Supplied with: 1 x Paint Container with Measuring Scale and Lid, 3 x Nozzles (Ø 3.0mm, 2.5mm, 1.5mm), 1 x Container for viscosity testing, 1 x Cleaning Brush and 1 x Cleaning Needle. Specifications: Delivery Capacity: 1,000 ml/min. Max. Viscosity:90 DIN-sec. Paint Container Volume: 1200ml. Air Hose Length: 1.8m. Weight:2.66kg.
