The Monument Trade Copper Pipe Cutter is ideal for cutting copper pipe in confined and awkward spaces. It is fixed in size, and only suitable for cutting the specified pipe size.The Monument MON1808 1808O Autocut Copper Pipe Cutter comes in the following: Size: 8mm
Using Monument Hand Bellows, air may be carefully pumped into the pipe. Fitted with a positive, hand operated non-return valve. Designed for use with Monument Air testing U Gauge kit.
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.The Monument MON1727 1727N Autocut Pipe Cutter comes in the following:Size: 27.4mm.
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.Monument MON1715 Autocut Pipe Cutter. Size: 15mm.
The Monument 170 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Ideal for Monument stiffnuts 27 mm and 32 mm and for 1/2-inch BSP 27 mm nuts, 3/4-inch BSP 32 mm nuts. Comes complete with 3/8-inch cordless drill adaptor and comes with full user instruction manual
The Monument 1012R Side Entry Manhole Keys have been designed for lifting light duty (pressed steel) manhole covers. These keys are made from 10mm steel bar and the simple 90 degree bent ends allow these keys to be used in a large number of different manhole types. Supplied in a pack of 2.
The Monument 4534X Grip+ T1 is a 27x32mm double-ended nickel plated hexagonal fitting tool. Fits most radiator valves, back nut box spanners, taps, pumps and cabinets. Use with the Monument 323F Tap Back Nut Box spanner. When connected to the box spanner, the Monument 4537G Grip plus shorty swivel handle or the Monument 345V adjustable basin wrench handle, it extends the reach for easier access.
The RIDGID Heavy-Duty 4 Wheel Pipe Cutter is designed for work in areas where a complete turn is impossible. Both models are equipped with four heavy-duty wheels. The 42-A Model has a short handle for use in confined areas. The 44-S Model has a second handle, making two-man leverage possible for large pipe sizes.RIDGID 44-S Heavy-Duty Pipe Cutter (USA Type) Capacity: 65-100mm (2.1/2 - 4in).Weight: 9.1kg.
Monument Adaptor Primus 2000 To 430F Adaptor adapts the Monument 430F Professional Torch to refillable bottles e.g. Primus®2000 and Calor®340. Made in Britain.
Mounment 437A Adaptor connects the MON430 professional soldering and brazing torch (UNEF 7/16 inch) to 1 inch US-Style bottles e.g. Propane, MAPP® and MAPPro®. Made in Britain.
The Monument 361T Box Ring Immersion Heater Spanner is made with an octagon at the base of the cylindrical section to enable really tight immersion heaters to be loosened by striking the handle. The one-piece casting enables full transmission of power to the spanner unlike loose tommy bar types. Overall clearance around the spanner is 7/8in (22mm) allowing easier fitting on insulated copper cylinders. Made in Britain.
The Monument Adjustable Basin Grip + Wrenches are ideal for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.The teeth on the jaws will grip uneven shapes etc. The swivelling head allows access where fixed spanners will not operate and the solid steel handle has profiled end to allow attachment of socket and extension for longer reach. Correct heat treatment of all components ensures a long life.Supplied with small and medium jaws. Size 15 and 22mm, 1/2 and 3/4 in
Monument 3450G is suitable for soldering and brazing of copper, brass and aluminium. Use with propane/MAPP® gas. The Gas Torch has Piezo ignition and produces a hot turbine flame, with a flame lock button. The flame size can be changed via an adjustable valve. An ergonomic hand grip ensures comfortable use. Fits CGA600 Cylinder.
The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish.
The Monument Spin Thru Drain Cleaner is a cleaner way to unblock drains. The 6mm (1/4in) spring is hand fed out of the rotatable plastic container into the drain, keeping it away from clean kitchen and bathroom surfaces. Suitable for sinks, baths, showers and small pipes.Specifications: Length: 6m (20ft).Diameter: 6.35mm (1/4in).
Monument Basin Wrench for fitting back nuts and union nuts of pillar and bath taps behind basins, sinks and baths. Manufactured from strong malleable material, and correctly machined jaws to fit standard back nuts 1/2 and 3/4in BSP. The offset design allows you to reach behind sinks & baths easily Overall Length: 260mm
Monument Mono Tap Back Nut Spanner Grip + Set is a set of 3 double ended tap back nut box spanners for quick assembly of tap back nuts on basins. Supplied with T-bar. The set comprises the following sizes: 8 x 10, 9 x 11 and 12 x 13mm.
Monument pipe cutter wheels are made from high quality, heat treated steels.The Monument MON310 310R Wheel for plastic to fit MON266 and TC3 Cutters, comes in a pack of 1.
Monument Abrasive Clean Up Strips, 180 grit silicone clean up strips of abrasive waterproof open mesh material for a multitude of cleaning jobs such as roughing up pipe, cleaning inside fittings (can be cut into small strips), deburring metal and wooden surfaces.
Moument Flux Brushes have wooden handles. Designed for applying flux to facilitate the process of making soldering joints, these brushes can also be used for general purpose. Head length: 10mm.Total length: 195mm. Pack of 3 + 2 Free.
Monument pipe cutter wheels are made from high quality, heat treated steels.The Monument MON301 fits Monument 300 Pipe Cutters. Pack colour: Orange (Packs are colour coded according to use).Pack of 1.
