This Faithfull Professional Plastic Pipe Cutter is ideal for use in demanding environments. Made from heavy gauge aluminium and incorporating a heavier duty ratcheting mechanism, this pipe cutter has been designed for everyday use and will perform quick, precise cuts on pipe of up to 42mm in diameter. The cutter features a handle lock that protects the stainless steel blade when in storage or not in use. Capacity: 3-42mm.
This Sievert Handyjet Multi-Purpose Blowtorch has a powerful, efficient and windstable multi-purpose burner. Fitted with a preheating tube, heating up the gas before combustion. This means our Handyjet can be used upside down without any flare-ups.Suitable for use with Sievert 2203 disposable gas cartridge (PRM2203).
Oracstar Isolating Valve with handle is suitable for hot and cold water. Easily fits onto a pipe and is simple to operate. Oracstar valves are the traditional way to control the flow of water for future repair and replacements. Chrome finish, with a handle for quicker operation.
The Monument Trade Copper Pipe Cutter is ideal for cutting copper pipe in confined and awkward spaces. It is fixed in size, and only suitable for cutting the specified pipe size.The Monument 2810R Autocut Pipe Cutter 10mm is ideal for cutting copper pipe in confined and awkward spaces.It is fixed in size, and only suitable for cutting the specified pipe size. Specification: Capacity: 10mm.
The Monument Olive Cutting Tool is designed to remove an olive from copper pipe without damaging the pipe and without producing swarf/debris. NOTE: DO NOT attempt to remove stainless steel olives with this tool. Made in Britain.1 x Monument 2030B Olive Cutting Tool 15mm
The Arctic Hayes Quad Pipe Cleaning Brush is lightweight and portable, hard-wearing and durable. It features two different bore sizes and is suitable for cleaning copper pipes both inside and out. Fits 15mm and 22mm copper pipes.
Arctic Hayes Landlord/Homeowner Gas Safety Record Pad of 25 A4 forms in triplicate. Suitable for landlord inspections, servicing and appliance checks for homes and caravans. Issued in accordance with the Gas Safety Regulations for installation and use.
The RIDGID Quick-Acting Tube Cutters for Plastic feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. The X-CEL Knob cuts tubing more quickly and easily with its larger, more ergonomic designs. The X-CEL Wheel Pin makes changing the cutter wheel quicker using the new ball detent design, no tools needed and no lost clips. Also available in models for Copper pipe.RIDGID 31667 Quick-Acting 156-P Tube Cutter For Plastic Std. Wheel: E-2157.Capacity: 110-160mm (1.1/2 - 4in).Weight: 2.23kg.
Faithfull gas quality P.T.F.E (polytetrafluoroethylene) tape will provide a gas, air and water tight seal on threaded joints. This invaluable tape is an essential component when working on gas pipework. Suitable for use on BS21 threads up to 50mm (2in). It is non-adhesive, no need for messy compounds. It won’t harden or dry out and is resistant to cracking, impermeable to 20 bar and performs a lubricating function. Used in the plumbing and heating industries for sealing pipes, conduits, bolts, valves and threaded gas lines that carry all common gases such as air, oxygen, ammonia, butane, chlorine and hydrogen, and liquids such as water, propylene glycol, kerosene and diesel. This tape satisfies BGC IM/16 and is tested to EN751-3:1997. Supplied as a pack of 10 rolls, not sold singularly.
The Arctic Hayes Smoke-Sticks™ Kit is the first product on the market offering a pencil thin smoke pattern. The smoke is non-corrosive and not harmful. Ideal for testing for the slightest air-movement, gas spillage. Also for mandatory CO spillage checks of boiler/case sills after fitting/re-fitting and HVAC air-movement/leakage checks. The Smoke-Sticks™ Kit comes with 3 Smoke-Sticks™ providing up to 3 hours of controllable smoke. Refill pack also available.The Arctic Hayes Smoke-Sticks™ Kit comes with: 1 x Smoke-Pen3 x Smoke-Sticks™
The Ridgid K-3 Closet Auger negotiates water conserving toilets to clear blocked drains. Featuring a durable, kink resistant compression wrapped IC cable, with a vinyl guard to protect porcelain. It has a large, ergonomically designed handle for comfort.Cable width: 12mm.Maximum reach: 1m.
The Campingaz Handy auto blowlamp has a highly ergonomic, shock-resistant polypropylene handle for comfortable use. With Piezo automatic ignition, it is extremely easy to light. The brass burner produces a flame which allows fine adjustment via a nozzle. It can be operated off either the Campingaz® CG1750 or CG3500 valve cartridges. Specification: Gas consumption: 175g/h. Flame temperature: 1,750°C. Supplied with a CG1750 gas cartridge. Runtime: 1h with CG1750. Weight: 227g.
Formerly PROTEX by Purimachos EVERBUILD P14 SYSTEM INHIBITOR is a multi-purpose treatment, specifically designed to protect the entire central heating system from scale, sludge and corrosion. *WRAS Approved formulation.*BuildCert Performance Standard*Compatible with all EVERBUILD central heating products. *Does not contain mineral oil.*compatible with plastic and fibreglass header tanks and with all metals used in central heating systems which includes iron, copper, steel, brass and aluminium. *Suitable for microbore systems constructed from plastic pipes. *New and existing central heating systems.*Extensions to existing systems.
The Arctic Hayes Tap Washer Kit contains a large selection of washers that are ideal for general plumbing. The washers are made from fibre and are supplied in a compartment case for easy identification. Contains the following: 55 x Vacca Flat Washers: 3/8in, 1/2in, 5/8in & 3/4in. 15 x Vacca Dome Washers: 1/2in & 3/4in. 30 x Dome Delta / Arm Washers: 1/2in & 3/4in. 20 x Tantofex Tap Washer: 1/2in & 3/4in. 50 x Cap & Lining Fibre Washers: 1/2in & 3/4in.
This Monument Suction Plunger is ideal for clearing WC pan wastes and gullies. It is made from soft, flexible rubber and has a wooden T-handle. Rubber Diameter: 140mm (5.1/2in)Overall Length: 445mm (17.1/2in)
The Faithfull Plumber's Soldering Pad is a high temperature, asbestos free protective heat pad for plumbing, brazing and soldering applications. Ideal for professional soft soldering, brazing and most other plumbing applications, this heavy-duty heat pad will provide protection to surfaces against burn marks and heat damage. For best results always insure the white side of the pad is facing towards the heat source and avoid direct flame contact with the surface of the pad for prolonged periods. If the surface of the pad begins to glow it should be moved slightly so that the flame is redirected to a previously unheated area. The pad also features an easy wipe clean back and has reinforced edging. Recommended for use with Butane, Propane and MAPP gas. Size: 195 x 300mm.Withstands temperatures of up to 1,200°C.
The combination of a ratchet cutting action and a lopper blade makes the Faithfull Pipe Cutter tool highly effective. The blade works against an anvil jaw which holds the pipe securely while pressure is increased. The ratchet mechanism maintains applied pressure so that the handles only need to be opened and closed approximately three times to complete the cut. Suitable for cutting neoprene hose, polythene pipe or fabric reinforced solid rubber up to 42mm outside diameter at right angles to the tube.
The Faithfull FAIPCCRW is a pack of 4 replacement cutting wheels for the Copper Chopper Pipe Slicer.The Faithfull ‘Copper Chopper’ is the perfect tool for making clean burr-free cuts in copper pipes. Ideal for use in confined or awkward places, it can be operated while using only one hand.
High quality adjustable, copper pipe cutter tool that ensures a square even cut.All parts liable to wear are heat treated.For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.It also has an integrated pipe-deburrer. No.1. Capacity 4 to 28mm. Spare wheel number MON273.Capacity: 12 - 43mm.
A range of replacement pipe cutter wheels for pipe cutters are available, as a sharp blade will result in a better cut and more reliable connection. The Faithfull FAIPCW642 pipe cutter replacement wheels (set of 3) is compatible with PC642
High quality adjustable, copper pipe cutter tool that ensures a square even cut.All parts liable to wear are heat treated.For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.It also has an integrated pipe-deburrer. No.1. Capacity 4 to 28mm. Spare wheel number MON273.Capacity: 4mm-28mm.
Monument Pipe Cutter is a high quality tool for use by professional and DIY Plumbing Installers, heating engineers, and maintenance staff. It assures a square even cut and all parts liable to wear are heat-treated. For sizes: 4mm up to 22mm (copper tube).
Rocol HYLOMAR JOINTING Compound is a non-setting jointing compound for flanged joints. It forms a permanent but flexible seal that resists vibration and thermal expansion. Non-setting, non-hardening sealantResists vibration & thermal expansionSuitable for pressures up to 35 bar (500psi)Temperature range of -50° C to +250° C Size: 100g tube.
