Monument smoke emitter pellets give off a dense white low-toxic smoke when ignited. They have a burn time of 60 seconds. For testing flues, chimneys, fans etc. Supplied in a pack of 10.
Monument Compression Nut Fitting Spanner is a one piece all steel construction compression nut spanner, that is single ended and made from drop forged steel for added strength and durability. Will suit most 28mm compression nuts and has an overall length of 290mm.
Monument Gas Test Gauge is made from tough plastic. Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level. Plastic U Tube.Monument 258F Gas Test Gauge. Size: 600mm (24 in).Capacity: 60 Millibar.
Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 502A Spare Flat Tap Reseater Cutter 17mm (11/16in)
Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 735G No.3 Beechwood Lead Dresser.Face: 55 x 190mm (2 1/4 x 7/1/2 in).
Monument automatic pipe cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any strain. Easy to use it cuts once the gate of the tool is closed over the pipe. Cuts in two directions. To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel. Replacement Wheel Number MONW15PC.Monument Automatic Copper Pipe Cutter. Size: 22mm.
This Ridgid RC-2375 Ratchet pipe cutter with a large diameter and an advanced blade design. This, combined with the ratcheting mechanism, reduces the amount of hand force needed to cut through hard plastic material. It has an aluminium construction for heavy-duty use, ergonomic grips and a quick-change blade pin. It easily cuts plastic pipe and tubing such as PVC and CPVC, as well as PEX, polyethylene, polybutylene and rubber hose. Capacity: 12-63 mm.
Designed for optimised performance on stainless steel tube, the Ridgid 35S cutter has six individual bearings, which replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube.An ergonomic knob allows for easy adjustments, and the contoured frame allows for easy alignment while adjusting the cutter to make a cut. Capacity: 5-35mm.
The 301-22 tube cutter has cutting capacities from 3 to 22mm in copper, bronze, aluminium and steel tubes. The compact round design gives the tool a good accessibility. The cutting wheel is exchangeable. The body and the knob in cast zinc.Spare cutting wheel; 301-22-95
Monument Adaptor Primus 2000 To 430F Adaptor adapts the Monument 430F Professional Torch to refillable bottles e.g. Primus®2000 and Calor®340. Made in Britain.
Quick and easy to use and can be used one-handed in confined spaces which eliminates external burrs. The are manufactured from aluminium alloy steel and supplied with one spare cutter wheel.Adjusts automatically to fit 22 mm copper pipe.
Monument Gas Test Gauge is made from tough plastic. Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level. Plastic U Tube.Monument 257C Gas Test Gauge. Size: 300mm (12 in).Capacity: 30 Millibar.
Monument Steel radiator spanner for 3/8 in and 10 mm square section radiator vent plugs and bleed screws. Zinc plated finish with slightly offset handle.
The Knipex 7 Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity, e.g. air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 & 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.
The Knipex 90 20 Series Cutter for cutting thin walled plastic pipes (e.g. aluminium armoured plastic pipes), flexible plastic and rubber hoses up to 25mm diameter. The tool is made of tough fibreglass reinforced plastic for added strength and durability. With a blade made of high-strength special grade steel, that has been oil-hardened and tempered. They have exchangeable blade have opening spring and locking lever for added grip. Not suitable for cutting steel. Cutting Capacity: 25mm.
The Faithfull Box Type Immersion Heater Spanner provides a firm non-slip grip on immersion heater elements. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied complete with a tommy bar to help provide added leverage when removing over tight elements. Manufactured from high-quality steel.
The combination of a ratchet cutting action and a lopper blade makes the Faithfull Pipe Cutter tool highly effective. The blade works against an anvil jaw which holds the pipe securely while pressure is increased. The ratchet mechanism maintains applied pressure so that the handles only need to be opened and closed approximately three times to complete the cut. Suitable for cutting neoprene hose, polythene pipe or fabric reinforced solid rubber up to 42mm outside diameter at right angles to the tube.
Irwin specialist cutter, suitable for cutting PVC tubes. With smooth cutting action and simple ratchet cutting mechanism for one handed operation. Capacity: 45mm.
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.1 x Monument 2691G Autocut Spares Kit to suit both 15 & 22mm autocut pipe cutters
The Arctic Hayes Surface Protector is foam backed making it ideal for protecting all work surfaces, especially kitchen worktops. The anti-slip mat is waterproof and highly absorbent. Resistant to oil, water, bleaches, detergents and more.
Monument 3450G is suitable for soldering and brazing of copper, brass and aluminium. Use with propane/MAPP® gas. The Gas Torch has Piezo ignition and produces a hot turbine flame, with a flame lock button. The flame size can be changed via an adjustable valve. An ergonomic hand grip ensures comfortable use. Fits CGA600 Cylinder.
The Monument Trade Copper Pipe Cutter is ideal for cutting copper pipe in confined and awkward spaces. It is fixed in size, and only suitable for cutting the specified pipe size.The Monument 2810R Autocut Pipe Cutter 10mm is ideal for cutting copper pipe in confined and awkward spaces.It is fixed in size, and only suitable for cutting the specified pipe size. Specification: Capacity: 10mm.
Monument pipe cleaning tool is the very best and safest way to prepare copper pipe and copper fittings and comes in 15mm and 22mm cutting sizes. Long-lasting double stemmed brushes clean quickly. Quick thorough tubing prep with patented tungsten carbide abrasive technology, they work 3x faster and last 4x longer than conventional tools. Patented ratchet handle makes jobs possible in tight spaces. Eliminates the risk of scrapes or flux burns.Monument MON2915 Copperkey Pipe Cleaning Tool.
Monument Compression Fitting Spanner double ended spanner for tightening and loosening most 15 and 22 mm compression fitting nuts. Size: 15/22 mm.Single pack.
Monument Plastic Pipe Cutter effective on PVC, polybutylene, MDP, polyethylene, HEP20®, plastic overflow pipe, plastic electrical conduit, supertube, mini trunking, rubber hose, pneumatic pipe and electrical sleeving. Simply place the cutter over the pipe to be cut and gently twist while you depress the handles to get a good clean cut.Monument Plastic Pipe Cutter. Maximum Pipe Size: 42mm ratchet action.
The Monument 4507X Grip+ R1 Radiator Thermostatic Radiator Valve Tail Fitting Tool with 16mm internal hex. Fits most radiator valves. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.
These RIDGID Top Screw Bench Chain Vices are fitted with a crank handle that is firmly anchored to the base of the vice. It also features a pipe rest and bender. The heavy-duty cast iron base has jaws especially designed for gripping and bending pipes.RIDGID BC210 Top Screw Bench Chain Vice Capacity: 6-60mm (1/8 - 2.1/2in).Weight: 3.5kg.
Monument Trac Pipe is a stainless steel, bendable corrugated gas pipe with a yellow polyethylene cover.This cutter has been designed to cut the omegaflex Trac Pipe from DN15/15 mm to DN32/32 mm.
The Monument OMAT® Soldering Mat is a patented cut out mat for soldering copper pipes from 15-22mm in diameter. It reduces the risk of fire, and its unique shape with overlap gives a tight and secure fit. Unlike conventional soldering mats the OMAT® wraps around the pipe offering complete protection to the surrounding surfaces. The OMAT® is constructed from a woven glass fabric and does not present any of the hazards associated with asbestos materials. Additionally, it is stitched all around and will resist temperatures up to 600°C.The Monument 2361F OMAT® Soldering Mat has the following specifications: Size: 250mm² (10in²).Pipe Capacity: 15-22mm.
The Bailey's Universal drain, chimney and flue cleaning brush has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5682 Universal Brush 100mm (4in)
