The McAlpine Dust Guard Cover is designed to fit over the McAlpine TSGDUSTGUARD, which is a unique, self-sealing waste valve that prevents foul odours and insects from entering the room via the waste pipe. The Dust Guard Cover is a protective cover that fits over the valve to prevent dust and debris from accumulating on it and potentially affecting its performance.
The Dust Guard Cover is made from a durable, easy-to-clean plastic material and is designed to be easily removable for cleaning and maintenance. It is also designed to be compatible with most standard waste pipes and can be used in a variety of commercial and residential applications.
If you have a McAlpine TSGDUSTGUARD waste valve installed in your plumbing system, the Dust Guard Cover is a simple and effective way to protect it from dust and debris. It is a cost-effective solution that can help extend the life of your waste valve and prevent costly repairs down the line.
The McAlpine TSG-Innercup is a replacement inner cup for the McAlpine TSG1 waste valve. The TSG1 waste valve is a self-sealing waste valve that prevents foul odours and insects from entering the room via the waste pipe. The inner cup is a crucial component of the waste valve, as it forms a tight seal around the waste pipe and prevents any leakage.
Over time, the inner cup may become worn or damaged, which can compromise the effectiveness of the waste valve. The McAlpine TSG-Innercup is designed to be a direct replacement for the original inner cup, ensuring that the waste valve continues to operate at peak performance.
The TSG-Innercup is made from a durable, high-quality rubber material that is designed to withstand the harsh conditions of plumbing systems. It is easy to install and can be done with minimal tools and experience.
If you have a McAlpine TSG1 waste valve installed in your plumbing system and notice any signs of leakage or odours, it may be time to replace the inner cup. The TSG-Innercup is a reliable replacement option that can help extend the life of your waste valve and prevent costly repairs down the line.
The McAlpine TSGSTOP Stopper is a versatile accessory for use with several McAlpine Trapped Shower Gully Dip Tubes models, including the TSG1, TSG50, TSG52, and TSG2. The stopper is designed to be used with the dip tube to provide a watertight seal that prevents water from flowing down the waste pipe and into the drainage system.
The TSGSTOP Stopper is made from a durable rubber material that is designed to withstand the harsh conditions of plumbing systems. It is easy to install and can be done with minimal tools and experience. The stopper fits snugly into the dip tube, creating a watertight seal that prevents any leakage.
If you have a McAlpine Trapped Shower Gully Dip Tube installed in your plumbing system and need to stop the flow of water, the TSGSTOP Stopper is an excellent option. It is compatible with multiple McAlpine models, making it a versatile accessory to have on hand. Additionally, it is a cost-effective solution that can help prevent costly repairs down the line by ensuring that your plumbing system remains leak-free.
・ When after installation the Gully is not going to be used there is a possibility that the water seal will evaporate. The Stopper when inserted into the Dip Tube will prevent foul air entering the building
・ For use with Trapped Shower Gullies TSG1, TSG50, TSG52 and TSG2 models only, either sheet flooring or tiled floor versions.
The McAlpine TSGSSTOP+TUBE is a combined stopper and overflow pipe for use with the McAlpine TSG1 and TSG2 waste valves. The TSGSSTOP+TUBE is designed to prevent the waste pipe from overflowing by diverting excess water into the overflow pipe, which is connected to a drain or other disposal system.
The TSGSSTOP+TUBE includes a stainless steel cover plate and insert tube, which provide a sleek and durable finish to the waste valve. The cover plate is designed to fit over the waste valve and hide any unsightly components, while the insert tube fits inside the waste valve and forms a tight seal around the waste pipe.
The stainless steel construction of the TSGSSTOP+TUBE provides excellent resistance to corrosion and wear, ensuring that the waste valve remains functional and attractive for years to come. The TSGSSTOP+TUBE is also easy to install and can be done with minimal tools and experience.
If you have a McAlpine TSG1 or TSG2 waste valve installed in your plumbing system and want to add a stopper and overflow pipe, the TSGSSTOP+TUBE is an excellent option. It provides reliable overflow protection while adding a stylish and durable finish to the waste valve.
The McAlpine White Plastic Cover Plate & Insert Tube Tsgwcover+Tube is a plumbing component designed to provide a neat and tidy finish to a wall or floor-mounted waste pipe. It consists of a white plastic cover plate and an insert tube, both of which are made from durable and high-quality materials.
The cover plate is designed to be screwed or glued onto a wall or floor surface to conceal the waste pipe and create a clean and finished look. The insert tube is designed to fit inside the waste pipe, providing additional support and preventing blockages.
This product is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings, and is easy to install and maintain.
The McAlpine TT10 is a plumbing component that is designed to be used as a water trap for waste pipes, typically in kitchen or utility room applications. Specifically, it is a 75mm water seal running tubular 'P' trap with a 1½" Multifit Outlet and a plain spigot end for connection to a waste disposal unit.
The trap is designed to prevent unpleasant odors from entering a room by trapping a small amount of water in the bend of the 'P' trap. This creates a water seal that prevents sewer gases from entering the room. The 75mm water seal running tubular design of the trap ensures that it can handle high volumes of waste water while maintaining an effective water seal.
The 1½" Multifit Outlet allows for easy and secure connection to a wide range of waste pipes, while the plain spigot end is designed to connect directly to a waste disposal unit. The trap is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability.
Overall, the McAlpine TT10 is a reliable and effective plumbing component that is suitable for use in a wide range of applications, and is easy to install and maintain.
・ 75mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for connection to most waste disposal units
・ Available as Anti-Syphon (Silentrap). Add suffix "V" to product code
・ Manufactured in polypropylene
The McAlpine TUN-1 is a plumbing component designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a 1½" Tun Dish with a ¾" Pushfit Outlet.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The 1½" size of the dish is a standard size for waste pipes, which allows for easy connection to the existing waste system.
The ¾" Pushfit Outlet is designed to connect to a flexible waste pipe, which is then connected to the main waste system. This connection is designed to be easy to install and remove, allowing for easy maintenance and cleaning.
The McAlpine TUN-1 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-1 provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain.
The McAlpine TUN-3 is a plumbing component that is designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a one-piece side inlet Tun Dish with a ¾" inlet and a 19/23mm universal outlet.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The one-piece design of the TUN-3 with a side inlet makes it easy to install, and it is suitable for use in tight spaces where access may be limited.
The ¾" inlet is designed to connect to a standard washing machine or dishwasher hose, while the 19/23mm universal outlet is designed to connect to a wide range of waste pipes. This allows for easy connection to the existing waste system.
The McAlpine TUN-3 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-3 provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain, especially in tight spaces where access may be limited.
・ Available in White or Chrome Plated Plastic
The McAlpine TUN-3CP is a plumbing component that is designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a one-piece side inlet Tun Dish with a ¾" inlet and a 19/23mm universal outlet, finished in chrome.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The one-piece design of the TUN-3CP with a side inlet makes it easy to install, and it is suitable for use in tight spaces where access may be limited.
The ¾" inlet is designed to connect to a standard washing machine or dishwasher hose, while the 19/23mm universal outlet is designed to connect to a wide range of waste pipes. This allows for easy connection to the existing waste system.
The McAlpine TUN-3CP is finished in chrome, giving it a modern and stylish appearance. It is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-3CP provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain, especially in tight spaces where access may be limited. The chrome finish also adds a stylish touch to any kitchen or utility room.
・ Available in White or Chrome Plated Plastic
The McAlpine TWL-18 is a standing waste fitting designed for use in a wide range of plumbing applications. It features a backnut model and a 70mm flange.
The standing waste is a plumbing component that is used to provide drainage for a variety of fixtures, including sinks, basins, and bidets. The backnut model of the TWL-18 is designed for easy installation, and allows for secure attachment to the waste pipe.
The 70mm flange of the TWL-18 provides a wide surface area for the attachment of the waste fitting to the floor, providing stability and preventing movement during use. This also helps to prevent leaks and damage to the surrounding area.
The McAlpine TWL-18 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TWL-18 standing waste provides a reliable and effective solution for drainage needs, and is designed for easy installation and maintenance. The 70mm flange provides stability and prevents movement during use, ensuring a secure and leak-free connection.
・ Available in 1¼" and 1½" sizes
・ Available in 2 tail lengths. 3 ½" tail and 1 ½" tail.
・ Supplied with Backnut and Washers
・ Standard length of Stand Pipe is 18" if other length required, when ordering state: (1) Code (2) Height required if not 18"
The McAlpine TWL-21 is a 1 1/2" X 21" standing waste fitting with a 3 1/2" tail, designed for use in a wide range of plumbing applications.
The standing waste is a plumbing component that is used to provide drainage for a variety of fixtures, including sinks, basins, and bidets. The TWL-21 is designed with a 1 1/2" diameter and a 21" length, providing a suitable height for use with various types of fixtures.
The 3 1/2" tail of the TWL-21 is designed for easy connection to a waste pipe, and is compatible with a wide range of plumbing systems. This makes installation and maintenance of the standing waste quick and easy.
The McAlpine TWL-21 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TWL-21 standing waste provides a reliable and effective solution for drainage needs, and is designed for easy installation and maintenance. The 3 1/2" tail ensures compatibility with a wide range of plumbing systems, making it a versatile choice for a variety of applications.
The McAlpine TWL-24 is a standing waste fitting designed for use in a wide range of plumbing applications. It features a 1 1/2" diameter and a 24" length, with a 3 1/2" tail for easy connection to a waste pipe.
The standing waste is a plumbing component that is used to provide drainage for a variety of fixtures, including sinks, basins, and bidets. The TWL-24 is designed to be a suitable height for use with various types of fixtures.
The 3 1/2" tail of the TWL-24 is designed for easy connection to a waste pipe, and is compatible with a wide range of plumbing systems. This makes installation and maintenance of the standing waste quick and easy.
The McAlpine TWL-24 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TWL-24 standing waste provides a reliable and effective solution for drainage needs, and is designed for easy installation and maintenance. The 3 1/2" tail ensures compatibility with a wide range of plumbing systems, making it a versatile choice for a variety of applications. The 24" length provides ample height for use with a variety of fixtures, making it a practical choice for a range of plumbing needs.
The McAlpine TWL-36 is a standing waste fitting designed for use in a wide range of plumbing applications. It features a 1 1/2" diameter and a 36" length, with a 3 1/2" tail for easy connection to a waste pipe.
The standing waste is a plumbing component that is used to provide drainage for a variety of fixtures, including sinks, basins, and bidets. The TWL-36 is designed to be a suitable height for use with various types of fixtures, and its 36" length provides ample height for use with taller fixtures or when additional height is required.
The 3 1/2" tail of the TWL-36 is designed for easy connection to a waste pipe, and is compatible with a wide range of plumbing systems. This makes installation and maintenance of the standing waste quick and easy.
The McAlpine TWL-36 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TWL-36 standing waste provides a reliable and effective solution for drainage needs, and is designed for easy installation and maintenance. The 3 1/2" tail ensures compatibility with a wide range of plumbing systems, making it a versatile choice for a variety of applications. The 36" length provides ample height for use with taller fixtures or when additional height is required, making it a practical choice for a range of plumbing needs.
The McAlpine TWLFCV is a screened breather, filter, and frost cover designed to prevent debris, insects, and frost from entering the waste system through the open end of a pipe. It features a compression joint that allows it to be easily connected to a waste pipe.
The TWLFCV is designed to fit onto the open end of a waste pipe and prevent debris, insects, and frost from entering the system. The screened breather allows air to flow freely into the system, preventing the buildup of pressure that can cause damage to the pipes. The filter prevents larger debris from entering the system, reducing the risk of blockages and other issues.
The frost cover helps to protect the system from damage caused by freezing temperatures, by preventing water from entering the system and expanding when it freezes. This helps to prevent pipes from bursting and other damage that can occur during freezing conditions.
The compression joint on the TWLFCV makes it easy to install and remove, allowing for quick and easy maintenance of the waste system. The joint ensures a secure and leak-free connection to the waste pipe, helping to prevent leaks and other issues that can occur with poorly connected components.
Overall, the McAlpine TWLFCV is a reliable and effective solution for preventing debris, insects, and frost from entering a waste system. Its screened breather and filter help to maintain airflow and prevent blockages, while its frost cover helps to protect the system from damage caused by freezing temperatures. The compression joint makes installation and maintenance quick and easy, ensuring a secure and leak-free connection to the waste pipe.
・ Available in 1¼" and 1½" sizes
The McAlpine TWS-18 is a standing waste fitting designed for use in a variety of plumbing applications. It features a backnut model and a 70mm flange, making it suitable for use with a range of fixtures.
The standing waste is a plumbing component that is used to provide drainage for a variety of fixtures, including sinks, basins, and bidets. The TWS-18 is designed to be a suitable height for use with various types of fixtures, and its 70mm flange provides ample surface area for secure attachment to the fixture.
The backnut model of the TWS-18 is designed to provide a secure and leak-free connection to the waste pipe. The backnut ensures that the fitting is held securely in place, helping to prevent leaks and other issues that can occur with poorly connected components.
The TWS-18 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TWS-18 standing waste provides a reliable and effective solution for drainage needs, and is designed for easy installation and maintenance. Its backnut model ensures a secure and leak-free connection to the waste pipe, while its 70mm flange provides ample surface area for secure attachment to the fixture. The TWS-18 is a practical choice for a range of plumbing needs.
・ Available in 1¼" and 1½" sizes
・ Available in 2 tail lengths. 3 ½" tail and 1 ½" tail.
・ Supplied with Backnut and Washers
・ Standard length of Stand Pipe is 18" if other length required, when ordering state: (1) Code (2) Height required if not 18"
The McAlpine UPSW-1 is a pumped shower waste outlet designed to provide efficient drainage for shower systems. It features a 70mm polished stainless steel flange with a plastic strainer grid, and a 15mm 'O' ring pushfit outlet.
The pumped shower waste outlet is designed to be used in situations where a gravity-fed waste system is not possible, such as in basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-1 features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm polished stainless steel flange provides a durable and stylish finish, and is suitable for use in a wide range of shower systems. The plastic strainer grid helps to prevent debris and other materials from entering the waste system, reducing the risk of blockages and other issues.
The 15mm 'O' ring pushfit outlet makes it easy to connect the pumped shower waste outlet to the waste pipe, ensuring a secure and leak-free connection. The outlet is designed for easy installation, and is suitable for use with a range of waste pipe materials.
Overall, the McAlpine UPSW-1 is a reliable and effective solution for situations where a gravity-fed waste system is not possible. Its built-in pump helps to ensure efficient and effective drainage, while its 70mm polished stainless steel flange and plastic strainer grid provide a durable and stylish finish. The 15mm 'O' ring pushfit outlet makes installation easy and ensures a secure and leak-free connection to the waste pipe.
・ 70mm polished Stainless Steel flange
・ Plastic strainer grid
・ 15mm 'O' ring pushfit outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
The McAlpine UPSW-2 is a pumped shower waste outlet designed to provide efficient drainage for shower systems. It features a 70mm chrome plated brass flange with top access and a 15mm plain tail outlet.
The pumped shower waste outlet is designed to be used in situations where a gravity-fed waste system is not possible, such as in basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-2 features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish, and is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, and the 15mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The pumped shower waste outlet is designed for easy installation, and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-2 is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 15mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 15mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine UPSW-2-22MM is a pumped shower waste outlet designed for efficient drainage of shower systems. It features a 70mm chrome plated brass flange with top access and a 22mm plain tail outlet.
The pumped shower waste outlet is ideal for use in situations where gravity-fed waste systems are not feasible, such as basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-2-22MM features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish that is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The pumped shower waste outlet is designed for easy installation and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-2-22MM is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 22mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine UPSW-3 is a pumped shower waste outlet that is designed for use in situations where gravity-fed waste systems are not practical. It features a 70mm chrome plated brass flange with top access and a 15mm plain tail outlet.
The UPSW-3 is ideal for use in situations where the waste outlet is located below the level of the waste pipe, such as basement showers. It features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish that is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, while the 15mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The UPSW-3 is designed for easy installation and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-3 is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 15mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 15mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine UPSW-3-22MM is a pumped shower waste outlet designed for use in situations where gravity-fed waste systems are not practical. It features a 70mm chrome plated brass flange with top access and a 22mm plain tail outlet.
Like the UPSW-3, this outlet is ideal for use in situations where the waste outlet is located below the level of the waste pipe, such as basement showers. The built-in pump helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish that is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, while the 22mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The UPSW-3-22MM is designed for easy installation and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-3-22MM is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 22mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine USG1-R125SS is an untrapped gully with a 22mm horizontal plain outlet. It is designed to be used in situations where there is no need for a water trap, such as in outdoor drainage systems.
The gully features a 125mm stainless steel grating which is designed to prevent debris and other materials from entering the drainage system. The grating can be easily removed for cleaning and maintenance, making it a practical and easy-to-use solution for outdoor drainage systems.
The 22mm horizontal plain outlet is designed to be connected to a waste pipe, and can be easily installed using standard plumbing techniques. The outlet is made from high-quality materials to ensure a durable and long-lasting connection to the waste pipe.
The USG1-R125SS is designed to be compatible with a range of different waste pipe materials, making it a versatile solution for a variety of outdoor drainage needs. It is also suitable for use in a range of different weather conditions, thanks to its durable stainless steel construction.
Overall, the McAlpine USG1-R125SS is a reliable and effective solution for untrapped outdoor drainage needs. Its stainless steel grating provides excellent debris protection, while its 22mm horizontal plain outlet makes it easy to connect to a waste pipe. The gully is easy to install and is made from high-quality materials, ensuring long-lasting durability and performance.
The McAlpine USG1SS is an untrapped gully designed for use with pumped waste systems. It features a 22mm horizontal plain outlet that is designed to be connected to a waste pipe using standard plumbing techniques.
The gully includes a clamp ring and cover plate that are designed to securely hold the waste pipe in place, ensuring a leak-free connection. This helps to prevent any wastewater from escaping and causing damage to surrounding areas.
The USG1SS is untrapped, which means that it does not include a water trap. This makes it ideal for use in pumped waste systems, where the pump is used to create enough pressure to force the wastewater through the pipe without the need for a water trap.
The gully also features a durable stainless steel construction, which makes it suitable for use in a variety of different weather conditions. The stainless steel construction also ensures that the gully is resistant to rust and corrosion, providing long-lasting durability and performance.
Overall, the McAlpine USG1SS is a reliable and effective solution for untrapped gully needs in pumped waste systems. Its 22mm horizontal plain outlet makes it easy to connect to a waste pipe, while its clamp ring and cover plate ensure a secure and leak-free connection. The gully's durable stainless steel construction ensures long-lasting durability and performance.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine USG1SS-SL-NSC is an untrapped gully designed for use with pumped waste systems. It features a 22mm horizontal plain outlet that is designed to be connected to a waste pipe using standard plumbing techniques.
The gully includes a clamp ring and cover plate that are designed to securely hold the waste pipe in place, ensuring a leak-free connection. This helps to prevent any wastewater from escaping and causing damage to surrounding areas.
The USG1SS-SL-NSC is untrapped, which means that it does not include a water trap. This makes it ideal for use in pumped waste systems, where the pump is used to create enough pressure to force the wastewater through the pipe without the need for a water trap.
The gully also features a durable stainless steel construction, which makes it suitable for use in a variety of different weather conditions. The stainless steel construction also ensures that the gully is resistant to rust and corrosion, providing long-lasting durability and performance.
In addition, the USG1SS-SL-NSC features a slot-in grating cover plate, which allows for easy access and maintenance of the gully. The cover plate can be easily removed for cleaning or inspection, making it a convenient solution for maintenance needs.
Overall, the McAlpine USG1SS-SL-NSC is a reliable and effective solution for untrapped gully needs in pumped waste systems. Its 22mm horizontal plain outlet makes it easy to connect to a waste pipe, while its clamp ring and cover plate ensure a secure and leak-free connection. The gully's durable stainless steel construction ensures long-lasting durability and performance, while the slot-in grating cover plate provides convenient maintenance access.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine USG1SS-SL-SC is an untrapped gully designed for use with pumped waste systems. It features a clamp ring and cover plate for easy installation and maintenance. The gully has a 22mm horizontal plain outlet and is made of stainless steel for durability and corrosion resistance. The "SL" in the product code refers to the "sound reducing" feature of the gully, which helps to reduce noise from water flow. The "SC" in the code refers to the "side connection" feature, which allows for a side inlet connection to the gully.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
