The McAlpine 1 1/4" Surefit X Multifit Straight Connector S28L is a plumbing component used to connect two pipes of different materials or sizes.
The Surefit X Multifit Straight Connector features a 1 1/4" push-fit connection on one end, which is compatible with McAlpine's Surefit range of push-fit pipes and fittings. The other end of the connector is a Multifit connection, which allows it to connect to a wide range of pipes with different diameters and materials, including copper, lead, plastic, and iron.
The S28L connector is made of high-quality materials and is designed to provide a reliable and long-lasting connection between pipes. It is easy to install without the need for special tools or adhesives, making it a popular choice among DIY enthusiasts and professional plumbers alike.
If you have any further questions or need additional information, please let me know.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 1 1/4" Pipe Clip S30 is a plumbing component used to support and secure a 1 1/4" pipe in place.
The pipe clip is made of high-quality materials and is designed to provide a secure and durable fixing for the pipe. It features a pre-fitted nail that can be easily hammered into place to secure the clip onto a wooden surface. The clip also has a snap-on design that allows it to be easily installed and removed from the pipe without the need for tools.
The S30 pipe clip is part of the McAlpine range of plumbing accessories, which are designed to provide reliable and long-lasting solutions for various plumbing applications. It conforms to relevant standards and regulations and is suitable for use in both domestic and commercial applications.
If you have any further questions or need additional information, please let me know.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine S4A Pushfit 90° Overflow Bend is a plumbing component used to connect an overflow pipe to a waste system.
The S4A overflow bend is part of McAlpine's push-fit plumbing range, which allows for easy and quick installation without the need for special tools or adhesives. The 90° bend is designed to provide a smooth and efficient flow of water from the overflow pipe into the waste system, preventing any potential damage or flooding.
The S4A overflow bend is made of high-quality materials and is resistant to corrosion and degradation. It is compatible with a wide range of pipes and fittings and conforms to relevant standards and regulations.
If you have any further questions or need additional information, please let me know.
・ Available in 1¼" and 1½" sizes
The McAlpine S4E Pushfit 90° Knuckle Overflow Bend is a plumbing component used to connect an overflow pipe to a waste system at a 90° angle.
The S4E knuckle overflow bend is part of McAlpine's push-fit plumbing range, which allows for easy and quick installation without the need for special tools or adhesives. The "knuckle" design of the bend allows for flexibility and adjustability in the installation, ensuring a perfect fit in any application.
The S4E overflow bend is made of high-quality materials and is resistant to corrosion and degradation. It is compatible with a wide range of pipes and fittings and conforms to relevant standards and regulations.
If you have any further questions or need additional information, please let me know.
・ Available in 1¼" and 1½" sizes
The McAlpine 1 1/4" 90 Degree Surefit Bend S4L is a plumbing fitting designed for use in waste and drainage systems. It is made by McAlpine, a leading manufacturer of plumbing products based in the United Kingdom.
The "1 1/4"" measurement refers to the diameter of the pipe that the fitting is designed to connect to. The "90 Degree" angle indicates that the fitting creates a sharp turn in the piping, redirecting the flow of water or waste.
The "Surefit" designation indicates that this particular fitting is designed to be easily installed and adjusted, with a flexible joint that allows for some movement during installation. The "S4L" model number likely refers to a specific variant or version of the fitting, although without additional context it's hard to say for sure.
Overall, the McAlpine 1 1/4" 90 Degree Surefit Bend S4L is a specific plumbing fitting that may be useful in certain waste and drainage systems where a sharp turn is required.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine S5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is another plumbing fitting made by McAlpine that is used in overflow systems.
The "Pushfit" designation indicates that the fitting is designed for easy installation and can be pushed into place without the need for additional tools or sealants. The "90° Knuckle Overflow Bend" describes the shape of the fitting, which creates a sharp turn in the piping to redirect the flow of water or waste.
The "BSP Coupling Nut" refers to the threaded connection on the fitting that allows it to be securely attached to other plumbing components. BSP stands for "British Standard Pipe" and refers to a type of threading commonly used in the UK.
Overall, the McAlpine S5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is a specific plumbing fitting that is useful in overflow systems where a sharp turn is required and easy installation is desired.
・ Available in 1¼" and 1½" sizes
The McAlpine 1 1/4" 95 Degree Multifit Bend X BSP Coupling Nut S5M-A is another plumbing fitting made by McAlpine that is used to connect pipes in waste and drainage systems.
The "1 1/4"" measurement refers to the diameter of the pipe that the fitting is designed to connect to. The "95 Degree" angle indicates that the fitting creates a relatively sharp turn in the piping, redirecting the flow of water or waste.
The "Multifit" designation indicates that the fitting is designed to be versatile and can be used with a variety of pipe materials, including copper, lead, and PVC. The "BSP Coupling Nut" refers to the threaded connection on the fitting that allows it to be securely attached to other plumbing components.
The "S5M-A" model number likely refers to a specific variant or version of the fitting, although without additional context it's hard to say for sure.
Overall, the McAlpine 1 1/4" 95 Degree Multifit Bend X BSP Coupling Nut S5M-A is a specific plumbing fitting that may be useful in certain waste and drainage systems where a relatively sharp turn is required and compatibility with multiple pipe materials is desired.
・ Available in 1¼" and 1½" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine S7 Pushfit Overflow Adaptor is a plumbing fitting made by McAlpine that is used in overflow systems.
The "Pushfit" designation indicates that the fitting is designed for easy installation and can be pushed into place without the need for additional tools or sealants. The "Overflow Adaptor" describes the purpose of the fitting, which is to connect an overflow pipe to the rest of the plumbing system.
Overall, the McAlpine S7 Pushfit Overflow Adaptor is a specific plumbing fitting that may be useful in certain applications where an overflow pipe needs to be connected to a larger plumbing system. Its pushfit design makes installation quick and easy.
・ Available in 1¼" and 1½" sizes
The McAlpine 1 1/4" BSP Nut S8A is a plumbing fitting made by McAlpine that is used to connect pipes in waste and drainage systems.
The "1 1/4"" measurement refers to the diameter of the pipe that the fitting is designed to connect to. The "BSP Nut" designation refers to the type of threading on the fitting, which is designed to connect to other components with BSP threading.
The "S8A" model number likely refers to a specific variant or version of the fitting, although without additional context it's hard to say for sure.
Overall, the McAlpine 1 1/4" BSP Nut S8A is a specific plumbing fitting that may be useful in certain waste and drainage systems where a threaded connection is required to connect pipes or other plumbing components.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine 1 1/4" BSP Compression Nut S8B is a plumbing fitting made by McAlpine that is used to connect pipes in waste and drainage systems.
The "1 1/4"" measurement refers to the diameter of the pipe that the fitting is designed to connect to. The "BSP Compression Nut" designation refers to the type of threading on the fitting, which is designed to connect to other components with BSP threading and has a compression fitting design.
The compression fitting design allows for a secure and leak-free connection between two pipes, without the need for additional sealants or adhesives.
The "S8B" model number likely refers to a specific variant or version of the fitting, although without additional context it's hard to say for sure.
Overall, the McAlpine 1 1/4" BSP Compression Nut S8B is a specific plumbing fitting that may be useful in certain waste and drainage systems where a threaded connection with compression fitting design is required to connect pipes or other plumbing components.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine 1 1/4" Multifit Loose Nut S8M is a plumbing fitting made by McAlpine that is used to connect pipes in waste and drainage systems.
The "1 1/4"" measurement refers to the diameter of the pipe that the fitting is designed to connect to. The "Multifit" designation indicates that the fitting is designed to be versatile and can be used with a variety of pipe materials, including copper, lead, and PVC.
The "Loose Nut" designation indicates that the fitting has a threaded connection with a loose nut that can be tightened or loosened by hand. This allows for quick and easy installation and removal of the fitting.
The "S8M" model number likely refers to a specific variant or version of the fitting, although without additional context it's hard to say for sure.
Overall, the McAlpine 1 1/4" Multifit Loose Nut S8M is a specific plumbing fitting that may be useful in certain waste and drainage systems where a versatile fitting with a threaded connection is required to connect pipes or other plumbing components, and where easy installation and removal is desired.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine S9 Pushfit BSP Screwed Overflow Adaptor is a plumbing fitting made by McAlpine that is used in overflow systems.
The "Pushfit" designation indicates that the fitting is designed for easy installation and can be pushed into place without the need for additional tools or sealants. The "BSP Screwed" designation refers to the type of threading on the fitting, which is designed to connect to other components with BSP threading and has a screwed connection design.
The "Overflow Adaptor" describes the purpose of the fitting, which is to connect an overflow pipe to the rest of the plumbing system.
Overall, the McAlpine S9 Pushfit BSP Screwed Overflow Adaptor is a specific plumbing fitting that may be useful in certain applications where an overflow pipe needs to be connected to a larger plumbing system, and where a screwed connection design is desired. Its pushfit design makes installation quick and easy, and its BSP threading allows it to connect to other plumbing components with the same type of threading.
・ Available in 1¼" and 1½" sizes
The McAlpine SE10V 75mm Water Seal Tubular Swivel Anti-Syphon (Silentrap) 'P' Trap with Universal Outlet is a plumbing fitting made by McAlpine that is commonly used in plumbing systems for sinks and basins.
The "Water Seal Tubular" designation refers to the type of trap, which is a U-shaped pipe that prevents sewer gases from entering the building. The "Swivel" designation indicates that the trap can be rotated or adjusted to fit different installation requirements. The "Anti-Syphon (Silentrap)" designation indicates that the trap has a built-in device that prevents water from being siphoned out of the trap, which can cause sewer gases to enter the building and can also lead to unpleasant noises.
The "'P' Trap" designation refers to the shape of the trap, which resembles the letter P. The "Universal Outlet" designation indicates that the trap has a versatile outlet that can be used with a variety of pipe materials, including copper, lead, and PVC.
Overall, the McAlpine SE10V 75mm Water Seal Tubular Swivel Anti-Syphon (Silentrap) 'P' Trap with Universal Outlet is a specific plumbing fitting that is commonly used in sink and basin installations where preventing sewer gases and unpleasant noises is important. Its swivel design allows for easy installation and its universal outlet makes it versatile for use with different types of pipes.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Universal Compression Outlet suits all plastic, copper and lead pipe
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
・ Manufactured in polypropylene
The McAlpine SK3 Standard Three Bowl Kit is a plumbing fitting made by McAlpine that is designed for use in commercial or industrial kitchen sink installations.
The kit includes three separate bowl traps, each with a 38mm water seal, as well as all the necessary fittings and connections to join the traps together and connect them to the main drainage system. The traps are designed to prevent grease, food particles, and other debris from entering the main drainage system, which can cause blockages and other plumbing issues.
Overall, the McAlpine SK3 Standard Three Bowl Kit is a specific plumbing fitting kit that is designed for use in commercial or industrial kitchen sink installations with multiple bowls. Its design helps to prevent blockages and other plumbing issues by capturing debris in the traps, and its inclusion of all necessary fittings and connections makes installation easier and more convenient.
・ Suitable for almost all British and European sinks
・ Supplied with an 1½" x 75mm water seal tubular swivel 'P' trap
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Can accept discharge hose of a domestic appliance
・ Supplied with blanking plugs
The McAlpine SM10EPLUG Blank Plug, Nut and Washer for SM10E Trap is a plumbing fitting made by McAlpine that is used to plug the outlet of the SM10E trap when it is not in use.
The SM10E trap is a water seal tubular trap that is commonly used in sink and basin installations. When the trap is not in use, such as during construction or renovation, it is necessary to plug the outlet to prevent debris or other materials from entering the trap and causing blockages.
The SM10EPLUG Blank Plug, Nut and Washer kit includes a plug, nut, and washer that can be used to seal the outlet of the SM10E trap. The plug is inserted into the outlet, and the nut and washer are then tightened to secure the plug in place.
Overall, the McAlpine SM10EPLUG Blank Plug, Nut and Washer for SM10E Trap is a specific plumbing fitting that is used to temporarily seal the outlet of the SM10E trap when it is not in use. Its design helps to prevent debris and other materials from entering the trap and causing blockages, and its inclusion of all necessary components makes installation quick and easy.
・ Replacement Plug for SM10E bath trap
・ Full range of spare parts and accessories are available on The Plumbers Mate
The McAlpine SM10PLUG Blank Plug, Nut and Washer for SM10 Trap is a plumbing fitting made by McAlpine that is used to plug the outlet of the SM10 trap when it is not in use.
The SM10 trap is a water seal tubular trap that is commonly used in sink and basin installations. When the trap is not in use, such as during construction or renovation, it is necessary to plug the outlet to prevent debris or other materials from entering the trap and causing blockages.
The SM10PLUG Blank Plug, Nut and Washer kit includes a plug, nut, and washer that can be used to seal the outlet of the SM10 trap. The plug is inserted into the outlet, and the nut and washer are then tightened to secure the plug in place.
Overall, the McAlpine SM10PLUG Blank Plug, Nut and Washer for SM10 Trap is a specific plumbing fitting that is used to temporarily seal the outlet of the SM10 trap when it is not in use. Its design helps to prevent debris and other materials from entering the trap and causing blockages, and its inclusion of all necessary components makes installation quick and easy.
・ Replacement Plug for SM10 bath trap
・ Full range of spare parts and accessories are available on The Plumbers Mate
The McAlpine SMP10V 50mm Water Seal Anti-Syphon (Silentrap) with 1½" Multifit Outlet Bath Trap is a plumbing fitting made by McAlpine that is used for bath installations.
The SMP10V trap features a 50mm water seal and an anti-syphon valve, which prevents water from being siphoned out of the trap and into the drainage system. The trap also includes a 1½" multifit outlet, which can be used with a variety of different pipe sizes and types.
The SMP10V trap is designed to be used in bath installations, where it is important to prevent blockages and other plumbing issues. The trap captures debris and other materials before they can enter the main drainage system, and the anti-syphon valve ensures that water remains in the trap, even during periods of high flow.
Overall, the McAlpine SMP10V 50mm Water Seal Anti-Syphon (Silentrap) with 1½" Multifit Outlet Bath Trap is a specific plumbing fitting that is used in bath installations to prevent blockages and other plumbing issues. Its design features a water seal, anti-syphon valve, and multifit outlet, and its inclusion of all necessary components makes installation quick and easy.
・ 50mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
・ Suitable for Use with McAlpine Bath Wastes
・ Manufactured in polypropylene
The McAlpine SOAP-CP Soap Dispenser for Sink is a plumbing accessory made by McAlpine that is used to dispense soap in sink installations.
The dispenser features a ½ litre bottle that can be filled with soap or other liquid cleaning products, and a chrome plated plastic top that dispenses the soap when pressed. The bottle is designed to be easily refillable, and the chrome plated plastic top is durable and long-lasting.
The SOAP-CP Soap Dispenser is commonly used in commercial and residential sink installations, where it provides a convenient and hygienic way to dispense soap. It is typically mounted directly onto the sink or countertop, and is easy to operate with one hand.
Overall, the McAlpine SOAP-CP Soap Dispenser for Sink is a specific plumbing accessory that is used to dispense soap in sink installations. Its design features a ½ litre bottle and a chrome plated plastic top, and its inclusion of all necessary components makes installation quick and easy.
・ For use with sinks
・ ½ litre capacity
・ Chrome Plated plastic top
The McAlpine SR10V 75mm Water Seal Running Tubular Swivel Anti-Syphon (Silentrap) 'P' Trap with Multifit Outlet is a plumbing fitting made by McAlpine that is used in sink and basin installations.
The SR10V trap features a 75mm water seal and an anti-syphon valve, which prevents water from being siphoned out of the trap and into the drainage system. The trap also includes a multifit outlet, which can be used with a variety of different pipe sizes and types.
The SR10V trap is designed to be used in sink and basin installations, where it is important to prevent blockages and other plumbing issues. The trap captures debris and other materials before they can enter the main drainage system, and the anti-syphon valve ensures that water remains in the trap, even during periods of high flow.
The running tubular swivel feature of the SR10V allows for easy installation, as it can be rotated to suit the required angle of the waste pipe. The multifit outlet also adds flexibility to the installation process, as it can be used with a variety of different pipe sizes and types.
Overall, the McAlpine SR10V 75mm Water Seal Running Tubular Swivel Anti-Syphon (Silentrap) 'P' Trap with Multifit Outlet is a specific plumbing fitting that is used in sink and basin installations to prevent blockages and other plumbing issues. Its design features a water seal, anti-syphon valve, running tubular swivel, and multifit outlet, and its inclusion of all necessary components makes installation quick and easy.
The McAlpine SS10 75mm Water Seal Running Tubular Swivel 'S' Trap with Multifit Outlet is a plumbing fitting made by McAlpine that is used in sink and basin installations.
The SS10 trap features a 75mm water seal and a running tubular swivel, which allows for easy installation as it can be rotated to suit the required angle of the waste pipe. The trap also includes a multifit outlet, which can be used with a variety of different pipe sizes and types.
The SS10 trap is designed to be used in sink and basin installations, where it is important to prevent blockages and other plumbing issues. The trap captures debris and other materials before they can enter the main drainage system, ensuring smooth and efficient drainage.
The multifit outlet adds flexibility to the installation process, as it can be used with a variety of different pipe sizes and types. This allows for greater compatibility with different plumbing systems and configurations.
Overall, the McAlpine SS10 75mm Water Seal Running Tubular Swivel 'S' Trap with Multifit Outlet is a specific plumbing fitting that is used in sink and basin installations to prevent blockages and other plumbing issues. Its design features a water seal, running tubular swivel, and multifit outlet, and its inclusion of all necessary components makes installation quick and easy.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Manufactured in polypropylene
・ Conforms to BS EN 274-1:2002
The McAlpine SSK3 Three Bowl Space Saver Plumbing Kit is a plumbing fitting made by McAlpine that is used in installations where multiple sinks or basins are required in a confined space.
The SSK3 kit includes three traps, three reducing bushes, three 1½" x 75mm water seal tubular swivel 'P' traps, and a length of 38mm waste pipe. The kit is designed to be used with sinks or basins that have a 1½" waste outlet and a 38mm waste pipe.
The SSK3 kit is designed to be used in applications where space is limited, such as in commercial kitchens, laboratories, and washrooms. The kit allows for the installation of three sinks or basins in a confined space, while maintaining efficient drainage and preventing blockages.
The kit's components are made from high-quality materials, ensuring long-lasting performance and durability. The inclusion of reducing bushes allows for greater compatibility with different sink or basin waste outlets, making the kit versatile and suitable for a range of applications.
Overall, the McAlpine SSK3 Three Bowl Space Saver Plumbing Kit is a specific plumbing fitting that is used in installations where multiple sinks or basins are required in a confined space. Its design features three traps, reducing bushes, water seal tubular swivel 'P' traps, and a length of waste pipe, and its high-quality materials and versatile compatibility make it suitable for a range of applications.
・ Allows full use of storage space below sink bowls
・ Suitable for almost all British and European sinks
・ Supplied with an 1½" x 75mm water seal tubular swivel 'P' trap
・ Universal Compression Outlet suits all plastic, copper and lead pipe
・ Can accept discharge hose(s) of domestic appliances
The McAlpine ST28L-ISO is a 1 1/4" x 40mm multifit straight connector that is used in plumbing installations to connect two sections of pipe together.
The ST28L-ISO connector features a multifit design, which allows it to be used with a variety of different pipe sizes and types, making it a versatile option for many plumbing applications. The connector also has a 1 1/4" diameter on one end and a 40mm diameter on the other end, allowing it to join pipes of different sizes.
The connector is made from high-quality materials, ensuring its durability and longevity. It also features an ISO-9001 quality management system certification, which ensures that the connector is manufactured to the highest standards.
Overall, the McAlpine ST28L-ISO 1 1/4" x 40mm multifit straight connector is a specific plumbing fitting that is used to join two sections of pipe together. Its multifit design and high-quality materials make it a versatile and durable option for many plumbing applications.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine ST70SS85 is a shower trap and waste fitting that is used in plumbing installations to trap and remove wastewater from a shower unit.
The ST70SS85 features a 70mm water seal trap and an 85mm diameter waste outlet, making it suitable for use with most standard shower units. The trap is designed to prevent foul odours from entering the room by retaining a small amount of water in the trap.
The ST70SS85 is made from high-quality materials, ensuring its durability and longevity. The trap also features a removable grid, which allows for easy cleaning and maintenance.
Overall, the McAlpine ST70SS85 70mm shower trap and 85mm waste fitting is a specific plumbing fitting that is used to trap and remove wastewater from a shower unit. Its high-quality materials and removable grid make it a durable and easy-to-maintain option for many plumbing applications.
The McAlpine ST90-70B is a trap body used in plumbing installations to trap and remove wastewater from a variety of different appliances and fixtures.
The ST90-70B features a 50mm water seal trap and a 1½" multifit outlet, making it a versatile option for many plumbing applications. The trap is designed to prevent foul odours from entering the room by retaining a small amount of water in the trap.
The ST90-70B is made from high-quality materials, ensuring its durability and longevity. It is also designed for ease of installation and maintenance, with a simple and straightforward design.
Overall, the McAlpine ST90-70B 50mm water seal trap body with 1½" multifit outlet is a specific plumbing fitting that is used to trap and remove wastewater from a variety of different appliances and fixtures. Its high-quality materials and simple design make it a durable and easy-to-maintain option for many plumbing applications.
・ 50mm Water Seal
・ Supplied with 135° Bend - BSP coupling nut x 1½" Multifit
・ Flow rate 34 l/min when tested under a constant 15mm head of water in accordance with clause 5 of BS EN 274-2:2002
・ Height of trap body is 76mm
