The McAlpine USG1WH Untrapped Gully is a plumbing component designed to be used with pumped waste systems. It features a 22mm horizontal plain outlet and includes both a clamp ring and a cover plate.
The gully is untrapped, which means it does not have a water seal that prevents foul odors and gases from escaping back into the room. This makes it unsuitable for use in certain situations, such as where there is a risk of backflow from the drain system.
However, the USG1WH gully is designed specifically for use with pumped waste systems, which typically operate at a higher pressure and are less prone to backflow. In these systems, the pump provides the necessary pressure to push waste water through the drainage system and out of the building.
Overall, the McAlpine USG1WH Untrapped Gully is a specialized plumbing component that is suitable for use in certain applications where a pumped waste system is in use. As always, it's important to consult with a qualified plumbing professional to determine whether this component is appropriate for your specific needs.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine TWLFBR ¾" Screened Tank Breather is a plumbing component designed to prevent pressure build-up in a water tank or cistern. It features a ¾" BSP male thread for easy installation and a screened air inlet to prevent debris from entering the tank.
The purpose of the tank breather is to allow air to enter and exit the tank, which helps maintain a consistent pressure inside the tank. This is particularly important in larger water storage systems, where pressure changes can cause damage to the tank or affect the quality of the water inside.
The McAlpine TWLFBR ¾" Screened Tank Breather is made from durable materials, including brass and plastic, to ensure long-lasting performance. It is suitable for use in both domestic and commercial plumbing systems and can be installed either horizontally or vertically.
・ Available in ¾", 1¼", 1½" and 2" sizes
・ WRAS approved
The McAlpine WU1A 1¼" Urinal Waste is a plumbing fitting used to connect a urinal to the waste pipe. It has a 60mm flush flange that fits into the urinal outlet and a 3½" tail with a backnut that connects to the waste pipe.
Here is a breakdown of the components:
1¼" refers to the diameter of the waste outlet that fits into the urinal.
60mm flush flange is the part that sits inside the urinal outlet and creates a seal to prevent leaks.
3½" tail is the part that extends from the flush flange and connects to the waste pipe.
Backnut is the threaded cap that secures the tail to the waste pipe.
Overall, the McAlpine WU1A is designed to provide a secure and leak-free connection between a urinal and the waste pipe.
・ Available with Chrome Plated Plastic or white plastic tail
・ 1¼" BSP
・ 60mm Flush Flange
・ 3½" Tail
・ Manufactured in Polypropylene
The McAlpine 2" Multifit Straight Connector is designed to connect two pipes with different sizes. In this case, it is compatible with a 50mm Euro pipe size. The connector is made of durable materials and features a multifit design, which means it can be used with a variety of pipe materials, including PVC, ABS, and copper.
The connector is easy to install and provides a secure, leak-free connection. It is suitable for use in a wide range of applications, including domestic and commercial plumbing, heating, and drainage systems.
It's worth noting that the size of the connector is specified in imperial measurements (2"), while the pipe size is specified in metric measurements (50mm). This is because the connector is designed to be compatible with pipes of different materials and sizes, and the imperial measurement provides a more universal standard. However, it's important to ensure that the connector is compatible with the specific pipe size and material you are working with before making a purchase.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine Z28M-NRV In-Line Non-Return Valve is a plumbing component that is designed to prevent backflow of water in a system. It is commonly used in wastewater and drainage systems to ensure that water flows in one direction only.
The valve features universal connections that make it easy to install in a variety of different plumbing systems. It also has a top access feature that allows for easy cleaning and maintenance, which is important to ensure the valve functions properly over time.
The Z28M-NRV model is a specific type of non-return valve that is designed for in-line use. This means that it can be installed directly into a pipe or conduit, without the need for additional fittings or connectors.
Overall, the McAlpine Z28M-NRV In-Line Non-Return Valve is a reliable and durable component that can help to prevent water damage and maintain the integrity of plumbing systems. Its universal connections and top access for cleaning make it a convenient and practical choice for many different plumbing applications.
・ Prevents back flow of water
・ Must be installed in the horizontal position
・ Should only be used when there is no alternative
・ 2" Universal Connnections
・ Top Access for easy cleaning
The McAlpine Z28M-NRVS is an in-line non-return valve designed for use in plumbing and drainage systems. It is specifically designed to prevent backflow of water or other liquids, which can cause contamination or damage to the system.
The valve features 2" BS EN 1329-1:2000 solvent weld connections, which provide a secure and leak-proof connection to the pipe system. The top access design allows for easy cleaning and maintenance of the valve without the need to remove it from the pipeline.
The McAlpine Z28M-NRVS valve is made of high-quality materials that ensure durability and long-lasting performance. It is suitable for use in a wide range of applications, including domestic and commercial plumbing systems, sewage treatment plants, and industrial processes.
Overall, the McAlpine Z28M-NRVS in-line non-return valve is an essential component of any plumbing or drainage system, providing reliable backflow prevention and easy maintenance.
・ Prevents back flow of water
・ Must be installed in the horizontal position
・ Should only be used when there is no alternative
・ BS EN 1329-1:2020 solvent Weld Connections
・ Top Access for easy cleaning
The McAlpine 2" In-Line Screened/Filter Pipe Coupling is a plumbing fitting designed to connect two sections of 2" pipes while also providing a filter function. The coupling has a removable screen or filter that traps debris and prevents it from flowing further down the pipe. This helps to prevent clogging and damage to downstream plumbing components.
The coupling is typically made of durable plastic material and is suitable for use in both residential and commercial plumbing applications. It can be used with a variety of pipe materials, including PVC, ABS, and copper.
The McAlpine 2" In-Line Screened/Filter Pipe Coupling is easy to install and requires no special tools or skills. Simply insert the two pipes into the coupling and tighten the clamps to create a secure, leak-free connection.
Overall, this coupling is a convenient and effective solution for preventing debris from entering and damaging plumbing systems.
・ Available in ¾", 1", 1¼", 1½" and 2" sizes
The McAlpine ZWLFBR ¾" Screened Tank Breather is a plumbing component used in wastewater and sewage systems. It is designed to prevent odors from escaping the plumbing system while allowing air to flow in and out of the system. The breather features a ¾" connection for easy installation and a screened design to prevent debris and insects from entering the system.
The McAlpine ZWLFBR ¾" Screened Tank Breather is commonly used in septic tank systems and other wastewater treatment systems. It helps to maintain proper pressure within the system, preventing damage and ensuring efficient operation. The breather is made from high-quality materials and is designed to withstand harsh environments and corrosive substances commonly found in wastewater systems.
Overall, the McAlpine ZWLFBR ¾" Screened Tank Breather is an essential component in any wastewater or sewage system, providing reliable and effective odor control and ventilation.
・ Available in ¾", 1¼", 1½" and 2" sizes
・ WRAS approved
The McAlpine BK1 is a combination of a clicker waste and bottle trap, designed for use with basins. It is an all-in-one unit, meaning that it has everything you need to install a basin waste and trap in one package.
The clicker waste is a type of plug mechanism that is operated by pushing down on the top of the plug. This opens and closes the waste, allowing water to drain out of the basin. The clicker waste is easy to use and can be operated with one hand.
The bottle trap is a type of plumbing trap that is used to prevent sewer gases from entering your home through the sink drain. It works by trapping a small amount of water in the trap, which creates a barrier to prevent gases from passing through.
The McAlpine BK1 is designed to be easy to install and comes with all the necessary fittings and instructions. It is suitable for use with most basins and can be used with both standard and mixer taps.
Overall, the McAlpine BK1 is a convenient and practical solution for installing a waste and trap for your basin. It saves time and effort by providing everything you need in one package and is a reliable and durable product.
・ Install in seconds
・ Uses an innovative and unique centre pin fixing
・ Trap is height adjustable
・ Clicker mechanism moulded in plastic to limit the effects of hard water
・ Fits basins with or without an overflow
The McAlpine BK2 All in One Fast Fix Basin Clicker Waste & Bottle Trap is a plumbing accessory used to connect a basin or sink to the waste pipe. It is designed to be an all-in-one solution that includes a basin waste and a bottle trap.
The clicker waste is a type of waste that has a mechanism that allows you to easily open and close the waste plug with a simple push or click. This makes it easier to use than a traditional waste with a separate plug and chain.
The bottle trap is a type of trap that is designed to prevent foul odors and gases from entering the room by retaining a small amount of water in the trap. It is called a bottle trap because it has a shape that resembles a bottle.
The McAlpine BK2 All in One Fast Fix Basin Clicker Waste & Bottle Trap is designed to be easy to install and comes with all the necessary fittings and seals. It is suitable for use with most types of basins and sinks and can be used in both domestic and commercial applications.
Overall, the McAlpine BK2 All in One Fast Fix Basin Clicker Waste & Bottle Trap is a convenient and practical solution for connecting a basin or sink to the waste pipe while also providing a reliable trap to prevent foul odors and gases from entering the room.
・ Install in seconds
・ Uses an innovative and unique centre pin fixing
・ Trap is height adjustable
・ Clicker mechanism moulded in plastic to limit the effects of hard water
・ Fits basins with or without an overflow
The McAlpine T28M-NRV Multifit In-Line Non-Return Valve is a plumbing component designed to prevent backflow of water or sewage in a drainage system. It is installed in-line with the pipe and allows water to flow in one direction only.
The valve is made of durable plastic and features a top access for easy cleaning and maintenance. This means that if the valve becomes clogged with debris or sediment, it can be easily accessed and cleaned without having to remove the entire valve from the pipe.
The Multifit design of the valve means that it can be used with a variety of different pipe materials and sizes, making it a versatile choice for many different plumbing applications.
Overall, the McAlpine T28M-NRV Multifit In-Line Non-Return Valve with top access for cleaning is a reliable and easy-to-maintain option for preventing backflow in a drainage system.
・ Available in 1¼" and 1½" sizes
・ Prevents back flow of water
・ Must be installed in the horizontal position
・ Should only be used when there is no alternative
・ Universal Connections
The McAlpine 40K-CB is a blanking cap designed to fit onto a chrome plated brass compression tee, specifically the 42E-CB model from McAlpine.
The purpose of a blanking cap is to seal off one end of a fitting, preventing the flow of fluids or gases through that particular branch of the pipe. In the case of the McAlpine 40K-CB, it is used to seal off the end of the compression tee where a pipe or other fitting would typically be attached.
This type of fitting is commonly used in plumbing and heating systems, where it may be necessary to close off certain branches of a pipe network for maintenance or repair purposes. The McAlpine 40K-CB is made from high-quality materials and is designed to provide a secure and reliable seal, ensuring that the system remains leak-free and operating efficiently.
・ Used to blank off chrome compression tee (42ECB)
Introducing the McAlpine Washer for Adjustable Inlet Trap - 40mm 40M, the perfect solution to keep your plumbing system running smoothly.
Designed to fit seamlessly with McAlpine adjustable inlet traps, this washer ensures a watertight seal for your plumbing fixtures. The high-quality rubber construction provides exceptional durability and longevity, ensuring that your plumbing system is leak-free for years to come.
The 40mm size is compatible with a range of plumbing systems and is perfect for both residential and commercial applications. Whether you're a plumber, DIY enthusiast, or simply need to replace a worn-out washer, the McAlpine Washer for Adjustable Inlet Trap - 40mm 40M is the ideal choice.
Installing the washer is quick and easy, thanks to its straightforward design. Simply slip the washer over the trap inlet and tighten the retaining nut for a secure fit. The washer's design also ensures that it won't deform or crack over time, making it a reliable and long-lasting addition to your plumbing system.
In summary, the McAlpine Washer for Adjustable Inlet Trap - 40mm 40M is an essential component for anyone looking to maintain a leak-free plumbing system. With its durable construction, straightforward installation, and compatibility with a range of systems, this washer is an excellent choice for homeowners, plumbers, and professionals alike.
・ Manunfactured in Rubber
The McAlpine A10AR is a type of bottle trap used in plumbing systems. It has a 75mm water seal, which prevents sewer gases from entering the building through the trap. The trap also has an adjustable inlet, which allows it to be connected to different sized pipes. The outlet is multifit, which means it can be connected to a variety of waste pipe sizes and types. The A10AR is designed to be easily disassembled for cleaning and maintenance, and is made from durable materials to ensure long-lasting performance. It is a commonly used trap in domestic and commercial plumbing applications.
・ Available in 1¼" and 1½" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ The simple non-mechanical action ensures retention of adequate water seal even under extreme syphonic conditions
The McAlpine A10AV-SV 75mm Water Seal Anti-Syphon (Silentrap) Adjustable Inlet Bottle Trap is a plumbing component used in sink and basin installations to prevent foul odors from escaping through the drain.
This particular bottle trap features a silicone non-return valve which prevents water from flowing back up the drain and causing flooding. It also has a multifit outlet which means it can be connected to different types of waste pipe, making it versatile and easy to install.
The adjustable inlet allows for flexibility in installation, as it can be adjusted to fit various pipe sizes and angles. The water seal in the trap prevents sewer gases from entering the room, ensuring a hygienic environment.
Overall, the McAlpine A10AV-SV 75mm Water Seal Anti-Syphon (Silentrap) Adjustable Inlet Bottle Trap is a high-quality and reliable plumbing component that can help ensure the proper functioning of your sink or basin drain while also preventing unpleasant odors from escaping into your living space.
・ Available in 1¼" and 1½" sizes
・ 75mm Water Seal
・ Silicone Valve prevents foul odour or sewer gas entering the building if the water seal has evaporated which may occur due to lack of use through under occupancy
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
The McAlpine AA10W is a basin trap with an adjustable inlet and a water seal of 75mm. It has a 1¼" multifit outlet, which means it can fit a range of waste pipes with different diameters.
Basin traps are an essential component of any plumbing system, as they prevent unpleasant odors and gases from entering the building from the sewer. The water seal acts as a barrier that stops the gases from passing through the trap and into the room.
The adjustable inlet of the McAlpine AA10W makes it easy to connect to different types of waste pipes, including those with different angles and offsets. This flexibility is essential in situations where the waste pipe is not in the ideal position for a standard trap.
The McAlpine AA10W also features a removable cleaning eye, which makes it easy to clean the trap if it becomes clogged. This is an important feature, as clogs can cause water to back up and overflow from the sink or basin.
Overall, the McAlpine AA10W is a reliable and versatile basin trap that is suitable for a wide range of plumbing applications.
・ 75mm Water Seal
・ 1¼" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Manufactured in polypropylene
・ Complete with 60mm Ø Polished Stainless Steel Waste Flange, Centre Pin fixing and dry jointing Washers, Plug, CP Chain and Stay
The McAlpine ABS42/43A-CB is a 90-degree compression bend made of chrome-plated brass, designed to connect to ABS solvent weld pipes. Compression fittings are designed to make secure and leak-proof connections between pipes without the need for soldering or welding.
ABS, or acrylonitrile butadiene styrene, is a type of thermoplastic polymer commonly used in drain, waste, and vent (DWV) systems. ABS solvent weld pipes are joined using a solvent cement, which chemically bonds the pipes together.
The McAlpine ABS42/43A-CB compression bend is designed to be used with ABS solvent weld pipes to create a bend in the pipe. The compression fitting is tightened onto the pipe using a compression nut, creating a tight seal between the fitting and the pipe.
The chrome-plated brass construction of the compression bend provides durability and resistance to corrosion. The bend is designed to withstand high-pressure and high-temperature applications, making it suitable for use in both residential and commercial plumbing systems.
・ Available in 1¼" and 1½" sizes
・ 1¼" version supplied with 2 rubber washers allowing chrome compression nut to fit on to 32mm European or 35mm UK chrome brass pipe
Introducing the McAlpine Rubber Washer for Bottle Trap Cup ARW1, the perfect solution to ensure a watertight seal for your bottle trap cup.
Designed specifically for McAlpine Bottle Trap Cup ARW1, this rubber washer provides exceptional durability and longevity, ensuring that your plumbing system is leak-free for years to come.
The high-quality rubber construction is resistant to deformations and cracks over time, making it a reliable and long-lasting addition to your plumbing system. It's also designed to withstand exposure to a range of chemicals and temperature variations, ensuring that it remains effective in all conditions.
The washer's easy-to-install design makes it quick and simple to replace old or worn-out washers. Simply remove the old washer from the bottle trap cup and slip the new McAlpine Rubber Washer into place. The washer's precise fit ensures that it won't slip or move around, providing a secure and leak-free seal.
In summary, the McAlpine Rubber Washer for Bottle Trap Cup ARW1 is an essential component for anyone looking to maintain a leak-free plumbing system. With its durable construction, easy installation, and compatibility with McAlpine Bottle Trap Cup ARW1, this washer is an excellent choice for homeowners, plumbers, and professionals alike.
・ Manunfactured in Rubber
The McAlpine ARW10 Rubber Washer is a spare part used for the bottle trap cup in plumbing systems. It is a small, circular rubber washer designed to fit around the rim of the bottle trap cup, which is used to prevent sewer gases from escaping into the home or building.
The McAlpine ARW10 Rubber Washer is made from high-quality rubber material, which makes it durable and resistant to wear and tear. It is designed to provide a tight seal between the bottle trap cup and the waste pipe, ensuring that no water or gases leak out.
When installing the McAlpine ARW10 Rubber Washer, it is important to ensure that it is properly aligned and seated around the rim of the bottle trap cup. This will ensure a secure and watertight seal, which is crucial for preventing leaks and ensuring the proper functioning of the plumbing system.
Overall, the McAlpine ARW10 Rubber Washer is a reliable and essential component of any plumbing system that uses a bottle trap cup. It is easy to install and provides long-lasting protection against leaks and other plumbing issues.
・ Available for A10, C10 and E10 Bottle Traps
The McAlpine ASE10V is a plumbing component commonly used in bathrooms and kitchens to trap and prevent the backflow of sewer gases into the living space. It is designed as a "P" trap, which is a type of plumbing trap that forms a water seal to prevent the escape of unpleasant odors and gases.
The ASE10V model features a 75mm water seal and an adjustable inlet that can swivel, making it easier to install in a variety of different plumbing configurations. It also includes an anti-syphon mechanism called a Silentrap, which helps to prevent the siphoning of water from the trap and the potential loss of the water seal.
The ASE10V trap has a universal outlet, which means it can be connected to a range of different drain sizes and configurations. This makes it a versatile and commonly used plumbing component in both residential and commercial applications.
It is important to note that the McAlpine ASE10V trap should be installed by a qualified plumbing professional to ensure it is fitted correctly and performs as intended.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Universal Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
McAlpine Bath Overflow Grid Chrome Plated Bathgrid-CP (70mm Width) is a type of bath overflow grid that is manufactured by McAlpine. This is designed to go on the bath overflow. It is threaded inside and will screw onto the McAlpine FBW1PC overflow waste.This particular bath overflow grid is designed to be chrome plated, which gives it a sleek and modern look that can complement most bathroom decor styles. It is designed to be used in conjunction with a bath waste and overflow, and it is constructed from high-quality materials to ensure its durability and longevity.The McAlpine Bath Overflow Grid Chrome Plated Bathgrid-CP is designed to fit most standard bath sizes and is easy to install. It helps to prevent debris from entering the overflow pipe, which can lead to blockages and other plumbing problems. Overall, this bath overflow grid is a reliable and practical solution for anyone looking to upgrade their bathroom's plumbing system.・ Manufactured in Chrome Plated Plastic・ Available in Gold Plated Plastic too・ 1.1/4" BSP Female thread underneath・ Threaded inside and will screw onto the McAlpine FBW1PC Overflow Waste
Introducing the McAlpine Bath Overflow Grid Gold Plated Bathgrid, the perfect finishing touch to elevate the look of your bathtub.
This elegant and sophisticated bath overflow grid features a stunning gold-plated finish that will add a touch of luxury to any bathroom. Crafted from high-quality materials, this bath grid is designed to withstand the rigors of daily use and provide long-lasting durability.
Designed to fit most standard bathtubs, the McAlpine Bath Overflow Grid Gold Plated Bathgrid features a classic design that complements a range of bathroom styles, from modern to traditional.
Installation is quick and easy, with no special tools required. Simply remove the existing overflow grid from your bathtub and replace it with the McAlpine Bath Overflow Grid Gold Plated Bathgrid. The grid is designed to fit securely and snugly in place, ensuring that it won't move or slip.
In addition to its stunning appearance, the McAlpine Bath Overflow Grid Gold Plated Bathgrid also serves a functional purpose, preventing water from overflowing and causing damage to your bathroom floor. With its durable construction and elegant design, this bath grid is the perfect addition to any bathroom.
In summary, the McAlpine Bath Overflow Grid Gold Plated Bathgrid is an essential component for anyone looking to elevate the look of their bathtub while also ensuring functional performance. With its stunning gold-plated finish, easy installation, and long-lasting durability, this bath grid is an excellent choice for homeowners, decorators, and professionals alike.
・ Manunfactured in Gold Plated Plastic
・ Available in Chrome Plated Plastic
The McAlpine BATHTRAP25-CPB is a chrome-plated brass bath trap designed for use with a 1½" universal outlet. It features a 25mm water seal to prevent odors and gases from escaping from the drainage system into your bathroom.
The bath trap is an essential component of any bathtub installation, as it helps to trap any debris and prevent it from clogging the plumbing system. The McAlpine BATHTRAP25-CPB is a high-quality option that is built to last, with a durable brass construction and a sleek chrome finish that will complement any bathroom décor.
Installation is straightforward and can be completed using basic plumbing tools. The bath trap should be fitted below the bathtub, connecting the waste outlet to the drainage system. It is important to ensure that all connections are tight and secure to prevent leaks.
Overall, the McAlpine BATHTRAP25-CPB is a reliable and effective solution for your bathtub plumbing needs. Its high-quality construction and easy installation make it a popular choice among homeowners and plumbers alike.
・ Available with 25mm or 50mm Water Seal
・ 1½" Universal Outlet
・ Manufactured in Chrome Plated Brass
The McAlpine BN3 White Plastic Backnut with Rubber Washer is a plumbing accessory used to secure a pipe or fitting in place. The backnut is made of white plastic and has a threaded inner surface that allows it to be screwed onto the corresponding threaded end of a pipe or fitting. The backnut is also equipped with a rubber washer that provides a tight seal between the backnut and the pipe or fitting, preventing leaks.The McAlpine BN3 White Plastic Backnut with Rubber Washer is commonly used in plumbing installations where a secure and leak-free connection is required, such as in bathrooms, kitchens, and other areas where water is used. The backnut is easy to install and requires no special tools or expertise, making it a popular choice among both professional plumbers and DIY enthusiasts.Overall, the McAlpine BN3 White Plastic Backnut with Rubber Washer is a reliable and cost-effective plumbing accessory that can help ensure a safe and leak-free plumbing installation.Size: 1.75" BSP ・ Available in 1.25” BSP, 1.5" BSP, 1.75" BSP and 2" BSP・ Available in 4 flange sizes・ White Plastic
