JG Speedfit release aid allows a firmer grip on the collet when removing pipes. Designed, manufactured and assembled in the UK. Provides a firmer grip on the collet demounting pipe For use with Speedfit fittings
JG Speedfit service valve for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.Instant push-fit service valve with 1/4 turn isolation screwdriver slotInstall and demount in seconds without toolsSafe flame-free installation, with no hot works, glue or fluxGrip & Seal collet with stainless steel teeth and main O-Ring sealCompatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipeSuitable for hot and cold water (not suitable for central heating)
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK. Colour coded for easy identification of supply type For use with Speedfit fittings Suitable for hot and cold water and central heating systems
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass female coupler for connecting metric pipe using a female thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass female coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable female thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK. Colour coded for easy identification of service type For use with Speedfit fittings Suitable for hot and cold water and central heating systems
John Guest straight adaptor (BSP thread) push-fit fitting for the connection of metric pipe to a BSP type thread. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
John Guest stem adaptor (BSP thread) adapts a push-fit connection to an imperial threaded connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
John Guest stem elbow push-fit fitting connects two John Guest push-fit fittings to create a 90° swivel type connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
Main Product Description:FloPlast 68mm Round 112' Offset Bend Black. (Pack of 2)Features:- Made from high-quality uPVC material for durability and longevity.- 112.5-degree offset bend allows for easy redirection of downpipe flow.- Compatible with Floplast's 68mm round downpipe system.- Available in various colors including black, anthracite grey, white, brown, and grey.- Easy installation process with pre-lubricated seals for smooth fitting.- No painting required due to maintenance-free finish.- 10-year manufacturer's guarantee provides peace of mind.Benefits:- Durable construction ensures long-lasting performance.- Adjustable direction helps manage water flow effectively.- Wide color selection caters to different aesthetic preferences.- Smooth installation process saves time and effort.- Low-maintenance finish eliminates the need for repainting.- Peace of mind with a comprehensive warranty.
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
