JG Speedfit conduit pipe coil is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure. Available in black, red and blue.
Durable corrugated design Colour coded for easy identification of water service
JG Speedfit conduit pipe coil is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure. Available in black, red and blue.
Durable corrugated design Colour coded for easy identification of water service
JG Speedfit conduit pipe coil is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure. Available in black, red and blue.
Durable corrugated design. Colour coded for easy identification of service type
JG Speedfit conduit pipe coil is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure. Available in black, red and blue.
Durable corrugated design. Colour coded for easy identification of service type
JG Speedfit pipe in pipe is ideal for short through wall pipe runs where a firmer pipe material is an advantage. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit pipe in pipe is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. The pipe comes encased in protective conduit pipe to protect it from potential damage when run through partitions or walls. Designed, manufactured and assembled in the UK.
Pre-fitted conduit protection
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
For I beam joists to be used with composite joists and are fixed from below. Speedfit Pipe is fixed in the grooves of the plates, insulation is placed in the void below the plates to minimise downward heatloss.
Technical Specification
Brand JG Speedfit
Manufacturer ID JGUFHSP165
Type Speedfit
Size (mm) 165
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit pipe repair kit for quickly and easily repairing broken pipework without having to dismantle the existing pipe set up. The twist & lock mechanism makes it easy to install, demount and adjust. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit pipe repair kit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit ball valve (chrome plated) for connecting plastic or copper pipe. Using an easy to operate handle, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit ball valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit service valve with integrated isolation handle
Durable brass chrome plated body
Red and blue indices for easy identification of water supply
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit release aid allows a firmer grip on the collet when removing pipes. Designed, manufactured and assembled in the UK.
Provides a firmer grip on the collet demounting pipe
For use with Speedfit fittings
JG Aura Hub supports up to 10 Internet enabled thermostats. For projects requiring more thermostats, a JG Hub User Licence will increase capacity by 10. An additional JG Hub User Licence can be purchased to increase the device maximum to 30.
10 hub user Licences
JG Speedfit lockshield radiator valve is used to switch off a radiator for installation or maintenance and can be used to balance radiators in the system so that they all heat up at the same rate.
The JG Speedfit lockshield radiator valve is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools.
Lockshield radiator valve with a tamperproof cap Fast and simple tool-free connection
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for central heating systems
JG Underfloor Manifold Elbow Connector is used to install a pump pack and manifold at 90º to each other.
Nickel plated
90ºC angle
For use with JG Underfloor control pack and manifolds
Suitable for underfloor heating applications only
JG Underfloor Heating Manual Air Vent uses a thumb turn bleed valve to manually vent air from within the UFH system to eliminate any cold spots within a floor.
The valve is easy to install as it simply screws directly into the manifold end connection on the manifold flow bar.
Thumb turn bleed valve
Manually air vent
Thumb turn valve
Durable DZR brass with a nickel plate finish
Suitable for underfloor heating applications only
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit x hand tighten flexi hose (white PVC) for the connection to a male thread appliance, such as a Tap. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a plastic nut which can be hand tightened on to a tap or male thread. To demount the push-fit end, simply push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit x hand tighten flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of supply type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Speedfit cold water service plug for plugging unused ports on a Speedfit MDPE push-fit fitting. Designed, manufactured and assembled in the UK.
Compatible with MDPE pipes only
Suitable for cold water use only
JG Speedfit cold water service stem elbow to connect MDPE pipe. The uniquely designed push-fit fitting incorporates a stem end for connecting two Speedfit push-fit fittings and stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up.
The JG Speedfit cold water service stem elbow is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Stainless steel teeth grab ring provides extra grip on the pipe
Durable material with high impact resistance
Non-toxic and no scale build-up
Resists corrosion and biological growth
Compatible with MDPE pipes only (inserts required)
Suitable for cold water use only
