John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified Add the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 10Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance
Integral 1/4 turn isolation valve
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
Pack of 7
John Guest black push-fit acetal female adaptor (BSP thread) fitting connects metric sized pipework to a BSP type fitting. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65�C max). All John Guest fittings are manufactured and assembled in the UK.
John Guest stem elbow push-fit fitting connects two John Guest push-fit fittings to create a 90° swivel type connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
John Guest equal elbow push-fit fitting connects two equally sized pipes to form a 90° pipe bend. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Main Product Description:
The FloPlast 110mm Soil Pipe Clip is a lightweight, durable clip designed for supporting 110mm soil and vent pipes during installation. It is made from uPVC for strength and resilience, making it suitable for high-temperature waste discharges. This clip ensures the stability of your plumbing system by securely holding the pipes in place.
Features:
- Lightweight design for easy handling and installation
- Made from uPVC for enhanced strength and durability
- Suitable for high-temperature waste discharges
- Designed to support 110mm soil and vent pipes
- Ideal for securing pipes during installation
Benefits:
- Enhances the stability of your plumbing system
- Reduces the risk of leaks and damage caused by loose pipes
- Improves overall performance and longevity of your plumbing system
The McAlpine MultiFit 90 Deg Bend 1.1/2" MT4-BL is a plumbing fitting used for redirecting the flow of water or waste through a plumbing system. The bend is made of durable and lightweight material, making it easy to handle and install. The fitting is designed with a multifit connection, which means it can fit a range of different pipe sizes and types, including copper, plastic, and lead pipes. The 90-degree bend allows for a smooth change in direction of the plumbing system, reducing the risk of blockages or leaks. This McAlpine MultiFit 90 Deg Bend 1.1/2" MT4-BL is a high-quality plumbing fitting designed for use in a variety of domestic and commercial plumbing applications.
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020, copper pipe and lead pipe
Introducing the McAlpine Supereasy 1.5" Close Coupling Kit, the perfect solution for creating a secure and hassle-free connection between your toilet cistern and pan. This innovative kit is designed to simplify the installation process, making it easier than ever to achieve a seamless and reliable coupling. The McAlpine Close Coupling Kit uses a patent pending plate that holds the bolts tight in place. The patent pending bolts have a tapered end with no thread, this makes locating and tightening the solid stainless steel nuts a breeze.
Crafted with precision and engineered to the highest standards, the McAlpine Supereasy Close Coupling Kit ensures a durable and long-lasting connection. Built from top-quality materials, this kit guarantees exceptional strength and resilience, providing you with peace of mind that your toilet setup is built to withstand the test of time.
One of the key features of the McAlpine Supereasy Close Coupling Kit is its user-friendly design. Installation becomes a breeze, thanks to its intuitive fittings and easy-to-follow instructions. Say goodbye to the frustration of complex installations and hello to a quick and effortless setup process.
Versatility is another standout attribute of this close coupling kit. Designed to fit a variety of toilet models, it offers compatibility with a wide range of systems. Whether you're replacing an existing toilet or embarking on a new bathroom project, the McAlpine Supereasy Close Coupling Kit is the ideal choice for professionals and homeowners alike.
Not only does this kit excel in functionality, but it also boasts a sleek and modern design. Its contemporary aesthetic effortlessly blends with any bathroom decor, adding a touch of sophistication to your space. The McAlpine Supereasy Close Coupling Kit not only ensures a reliable connection but also enhances the overall look of your toilet setup.
Upgrade your bathroom experience with the McAlpine Supereasy 1.5" Close Coupling Kit and enjoy a seamless and secure connection between your toilet cistern and pan. This premium kit combines ease of installation, durability, and aesthetic appeal, making it the ultimate choice for anyone seeking a superior solution for their toilet fittings. Invest in the McAlpine Supereasy Close Coupling Kit today and transform your bathroom into a functional and stylish oasis.
• Easy Installation: The kit is specifically designed for quick and hassle-free installation, saving you time and effort. Its intuitive fittings and clear instructions make connecting the toilet cistern and pan a simple task.
• Durable Construction: Crafted from high-quality materials, the close coupling kit offers exceptional durability and long-lasting performance. It is built to withstand the rigors of daily use, ensuring a secure and reliable connection.
• Versatile Compatibility: The kit is compatible with a wide range of toilet models, making it suitable for various installations and renovations. It offers flexibility and convenience, accommodating different system configurations.
• Reliable Connection: With its precise engineering and robust construction, the close coupling kit ensures a secure and watertight connection between the cistern and pan. It eliminates leaks and potential issues, providing reliable performance.
• Sleek Design: The close coupling kit features a modern and aesthetically pleasing design, seamlessly blending with any bathroom decor. Its sleek appearance adds a touch of style and sophistication to your toilet setup.
• Long-Term Cost Savings: By ensuring a reliable and durable connection, the close coupling kit helps reduce maintenance and repair costs associated with leaks or faulty fittings. It provides a cost-effective solution for your toilet system.
The McAlpine PUS70-CP 1½" Pop-Up Sink Waste is a plumbing fitting used to drain water from a sink. It features a 70mm stainless steel flange, a chrome-plated plastic command knob, and a center pin model.
The pop-up waste mechanism allows the user to easily control the flow of water from the sink. The chrome-plated plastic command knob is used to open and close the pop-up waste mechanism. The center pin model is designed to ensure a secure and leak-free connection between the sink and the plumbing system.
The McAlpine PUS70-CP is made from high-quality materials, which are durable and resistant to corrosion. The stainless steel flange and chrome-plated plastic command knob give it a sleek and modern look that can complement a range of bathroom and kitchen styles.
Installation of the McAlpine PUS70-CP is straightforward and can be done by a qualified plumber. The fitting is designed to be compatible with a range of sink models and can be easily installed using standard plumbing techniques.
Overall, the McAlpine PUS70-CP 1½" Pop-Up Sink Waste is a reliable and efficient solution for draining water from a sink. It is a durable and long-lasting product that can help to ensure a secure and leak-free connection between the sink and the plumbing system. The pop-up waste mechanism and chrome-plated plastic command knob make it easy to use and control the flow of water from the sink.
・ Available with or without flexible overflow and CP Plastic grid
・ 1½" BSP
・ 70mm Stainless Steel flange
・ Chrome Plated plastic command knob
・ Manufactured in Polypropylene
The McAlpine MS4-32SOLVENT is a plumbing fitting used to create a 90° bend in a pipe. It is designed to be used with ABS pipes and features a solvent weld connection on one end and a 32mm European pipe size ring seal pushfit connection on the other.
The solvent weld connection is designed to be used with ABS cement, which creates a permanent bond between the fitting and the pipe. The ring seal pushfit connection is designed for easy installation, with no need for additional sealing materials.
The McAlpine MS4-32SOLVENT is made from high-quality ABS, which is durable and resistant to corrosion. The 90° bend design allows for easy routing of pipes around corners and obstacles.
Installation of the McAlpine MS4-32SOLVENT is straightforward and can be done by a qualified plumber. The fitting is designed to be compatible with a range of ABS pipes and can be easily joined using ABS cement.
Overall, the McAlpine MS4-32SOLVENT 90° ABS solvent weld Bend x 32mm European pipe size Ring Seal Pushfit is a reliable and efficient solution for creating a 90° bend in ABS pipes. It is a durable and long-lasting product that can help to ensure a secure and leak-free connection between pipes.
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The McAlpine 1.1/2 Solvent X Push Fit Adaptor Straight T18-Abs is a plumbing fitting that is designed to connect a 1.1/2 inch solvent pipe to a push-fit pipe. The "T18-Abs" in the description refers to the specific model of the adaptor, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The adaptor has a 1.1/2 inch end that is designed to be connected to a solvent pipe using solvent cement, and a push-fit end that is designed to be connected to a push-fit pipe without the need for any additional fittings or tools. The adaptor is designed to create a secure, leak-free connection between the two pipes.
Overall, this type of adaptor is commonly used in plumbing applications where a solvent pipe needs to be connected to a push-fit pipe. The McAlpine 1.1/2 Solvent X Push Fit Adaptor Straight T18-Abs is made from high-quality materials and is designed to provide reliable performance over an extended period of time.
・ Available in 1¼" and 1½" sizes
The McAlpine ST90CB10-HP2 is a 90mm x 50mm water seal shower trap designed for use in showers. It features a 1½" outlet and a removable 110mm flange, which makes it easy to install and maintain.
The ST90CB10-HP2 model features a high-flow, high-performance trap design that allows for rapid and efficient drainage of water. This is particularly useful for showers that produce a high volume of water, such as power showers or multi-jet shower systems.
Like the standard ST90CB10 model, the ST90CB10-HP2 also features a water seal trap design that prevents foul odours from entering the bathroom by trapping water in the trap. The 90mm x 50mm size is suitable for most standard shower installations.
The removable 110mm flange is a useful feature that allows for easy access to the trap for cleaning and maintenance purposes. This makes it easy to keep the trap clean and free from blockages, ensuring that the shower continues to function properly.
Overall, the McAlpine ST90CB10-HP2 shower trap is a reliable and practical choice for anyone looking for a high-flow, high-performance shower trap. Its water seal design prevents foul odours from entering the bathroom, while the removable flange makes it easy to maintain and keep clean. The high-performance trap design ensures efficient drainage of water, making it a suitable option for power showers or multi-jet shower systems.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 1½" Universal
The McAlpine WM2V is a 75mm water seal tubular swivel anti-syphon (Silentrap) 'P' trap with a multifit outlet and inlet connection for the discharge from a domestic appliance. It is a plumbing component designed to provide a reliable and cost-effective solution for installations that require a trap for a domestic appliance such as a washing machine or dishwasher.
The WM2V trap is made from high-quality materials, ensuring durability and long-lasting performance. The swivel 'P' trap design allows for easy installation and provides flexibility in positioning the appliance discharge pipe. The trap features a 75mm water seal to prevent the backflow of foul odors from the drain into the appliance.
The anti-syphon (Silentrap) feature of the WM2V trap prevents the siphoning of water from the trap, which can cause a loss of the water seal and the release of foul odors into the environment. This feature is particularly useful in situations where the appliance is located below the level of the trap, as it prevents the trap from being emptied by the weight of water in the discharge pipe.
The multifit outlet connection makes the WM2V trap compatible with a range of plumbing systems, while the inlet connection for the appliance discharge allows for easy connection of the appliance to the trap. The trap also features an easy-to-clean design with removable components for hassle-free maintenance.
Overall, the McAlpine WM2V 75mm Water Seal Tubular Swivel Anti-Syphon (Silentrap) 'P' Trap with Multifit Outlet and inlet connection for the discharge from a domestic appliance is a reliable and cost-effective solution for plumbing installations that require a trap for a domestic appliance. It is widely used in both domestic and commercial plumbing systems and is a popular choice among plumbers and builders for its ease of use, reliability, and anti-siphoning feature.
・ 75mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Can accept discharge from a washing or dishwashing machine
・ Manufactured in polypropylene
・ Conforms to EN 274-1:2002
The McAlpine M/Fit Blank Cap 2 Z23U" is a plumbing component used to cap or seal off a pipe. The blank cap is designed to fit onto a 2 inch pipe with a Z23U" end, providing a tight and secure seal.
The M/Fit blank cap is part of the McAlpine Multifit range, which is designed to provide a versatile and reliable solution for a range of plumbing applications. The blank cap is made from high-quality materials, ensuring durability and long-lasting performance.
The cap features a simple, one-piece design that makes installation quick and easy. It can be used to cap off a pipe temporarily or permanently, depending on the requirements of the plumbing system.
Overall, the McAlpine M/Fit Blank Cap 2 Z23U" is a reliable and cost-effective solution for sealing off pipes in a range of plumbing applications. It is widely used in both domestic and commercial plumbing systems and is a popular choice among plumbers and builders for its durability and ease of use.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine FGTOP6SS 150mm Square Polished Stainless Steel Tile is a stylish and practical plumbing accessory that is designed for use in shower and wet room installations. It is made from high-quality polished stainless steel that is resistant to corrosion and damage caused by water and chemicals.
The FGTOP6SS tile features a removable grid and securing screws that make it easy to access the waste system for cleaning and maintenance purposes. The tile is also designed with an ABS adaptor that makes it easy to connect to the waste pipe.
The square shape of the tile and the polished finish make it an attractive addition to any bathroom or wet room installation. It is also easy to install, and the removable grid feature makes it easy to clean and maintain.
Overall, the McAlpine FGTOP6SS 150mm Square Polished Stainless Steel Tile is a reliable and practical plumbing accessory that is designed to work seamlessly with McAlpine's range of shower and wet room products. Its high-quality construction, attractive design, and easy maintenance make it an ideal choice for use in both residential and commercial bathroom installations.
・ Tile has ABS Spigot Adaptor for solvent welding to Clamp Ring
・ Can be interchanged with a White ABS Tile
The McAlpine WC-CON8F18-BTW is a flexible WC connector designed for back to wall toilet pans, which can be installed in a vertical position. The connector has an inlet diameter of 97-107mm and features a 90° bend, which helps to ensure a secure and reliable connection between the pan and the soil pipe.
The flexibility of the connector allows for easy installation, even in situations where the toilet pan and the soil pipe are not perfectly aligned. This can save time and money by reducing the need for complicated plumbing work.
The McAlpine WC-CON8F18-BTW is made from high-quality materials and is built to last. It is designed to withstand the demands of daily use and is resistant to damage from chemicals and other corrosive substances.
Overall, the McAlpine WC-CON8F18-BTW is a reliable and convenient solution for connecting a back to wall toilet pan to a soil pipe.
・ Available in 2 lengths
・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Enables easy installation of WC pans in awkward situations
The McAlpine 2" X 1 1/2" Bsp Coupling is a plumbing fitting designed for connecting pipes of different sizes. The coupling is made of high-quality PVC material, and it has a 2-inch female threaded end and a 1 1/2-inch male threaded end.
The coupling is designed to be used with pipes that have a British Standard Pipe (BSP) thread, which is a common type of threading used in plumbing applications in the United Kingdom and other parts of the world.
The McAlpine 2" X 1 1/2" Bsp Coupling is typically used to connect two pipes of different sizes together, allowing for the efficient and reliable transfer of fluids or gases. The coupling is easy to install and can be tightened securely using a wrench.
Overall, the McAlpine 2" X 1 1/2" Bsp Coupling is a high-quality plumbing component that is built to last. It is suitable for use in a wide range of plumbing applications and is compatible with a variety of different pipe materials.
・ Available in 9 sizes
・ Waste Outlet Reducer
The McAlpine GWU20 is a 2" urinal waste with an 85mm plastic domed flange and a 42mm tail with a backnut model. It is designed for use in commercial or public restrooms where urinals are installed.
The 2" diameter of the waste pipe is suitable for handling the larger volume of water and waste that is produced by urinals. The 85mm plastic domed flange provides a secure and watertight seal between the waste pipe and the floor or wall, preventing any leaks or water damage.
The removable dome on the flange makes it easy to access and clean the waste pipe, while the backnut model allows for easy installation and removal of the waste pipe as needed. The 42mm tail of the waste pipe is designed to connect to standard plumbing fixtures and pipes, making it easy to integrate into existing plumbing systems.
When installing the McAlpine GWU20 urinal waste, it is important to follow the manufacturer's instructions carefully and use appropriate tools and materials. The waste pipe should be securely fastened and any excess sealant or debris should be cleaned away to ensure a reliable and leak-free installation.
Overall, the McAlpine GWU20 urinal waste is a reliable and durable option for use in commercial or public restrooms where urinals are installed.
・ Available with grey or white plastic tail
・ 2" BSP
・ 85mm Domed Flange with removable dome
・ Removable dome with 42mm tail
・ Manufactured in Polypropylene
The McAlpine Z23 Blank Cap with nut is a plumbing fitting designed to seal off an unused or open pipe end. It features a BSP (British Standard Pipe) thread and comes with a nut for easy installation and removal.
The Z23 blank cap is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The cap is designed to provide a secure and watertight seal, preventing any leaks or water damage that could occur if a pipe end is left open.
The cap is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is compatible with other BSP threaded fittings and pipes, and its simple design makes it easy to install and remove.
Overall, the McAlpine Z23 Blank Cap with nut is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal for unused or open pipe ends. It is easy to install and compatible with a range of other fittings and pipes, making it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine WS3 1½" Shower Waste is a plumbing fitting designed for use in shower systems. It features an 85mm white plastic flange and a 3½" tail with a backnut model for easy installation.
The WS3 waste is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in shower systems. The white plastic flange provides a neat and tidy finish that is suitable for a wide range of bathroom designs.
The 3½" tail of the waste is designed to fit into standard sized pipes and provides a secure and watertight seal to prevent leaks. The backnut model of the waste makes it easy to install and remove as needed, allowing for simple maintenance and repairs.
The WS3 shower waste is suitable for use in both domestic and commercial shower systems, and is capable of handling the demands of high-flow water systems. It is compatible with a range of shower trays and floor surfaces, making it a versatile and reliable choice for any shower installation.
Overall, the McAlpine WS3 1½" Shower Waste is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in shower systems. It is easy to install and maintain, making it a popular choice for both professional and DIY plumbers.
・ 1½" BSP
・ 85mm White Plastic flange
・ White plastic Backnut
・ 1½" Tail
・ Manufactured in Polypropylene
The McAlpine WM14V is a plumbing trap designed for use with domestic appliances such as dishwashers and washing machines. It is an anti-syphon (Silentrap) 'P' trap, which means it is designed to prevent the backflow of wastewater from the pipework and prevent airlocks in the system.
The trap has a 75mm water seal to prevent foul odours from entering the room, and a 1.5" multifit outlet for easy connection to standard pipework. It also features a 135° swivel inlet connection, which allows the discharge pipe from the appliance to be connected at an angle that is convenient for installation.
The anti-syphon feature of the WM14V trap prevents the siphoning of water from the trap, which can lead to airlocks and the release of unpleasant odours. This feature ensures that the trap remains full of water, creating an effective barrier to prevent the backflow of wastewater.
The WM14V is designed as a tubular swivel trap, meaning that it consists of a curved section of pipe that creates a water seal. This water seal prevents unpleasant smells from entering the room, as well as preventing the backflow of wastewater from the pipework.
Overall, the McAlpine WM14V trap is a reliable and easy-to-install solution for ensuring a clean and efficient waste system for domestic appliances such as dishwashers and washing machines. Its anti-syphon feature, 135° swivel inlet connection, and 75mm water seal make it a versatile choice for a range of installation scenarios.
・ 75mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Can accept discharge from a washing or dishwashing machine
・ Supplied with blank plug allowing trap to function as a normal sink trap until the domestic appliances are connected
・ Available as Anti-Syphon (Silentrap). Add suffix "V" to product code
The McAlpine T12H is a coupling fitting that connects a 1 1/2-inch female BSP (British Standard Pipe) threaded pipe to a 1-inch male BSP threaded pipe. This coupling is designed for use with plastic pipes and features a push-fit connection, which makes installation quick and easy.
It's important to note that BSP threads are used primarily in Europe and Asia, while the US typically uses NPT (National Pipe Thread) or NPS (National Pipe Straight) threads. Therefore, if you are in the US or another country that primarily uses NPT or NPS threads, you may need to use an adapter or different type of fitting to connect your pipes.
・ Available in 9 sizes
・ Waste Outlet Reducer
The McAlpine SWHF1-WH is a high flow shower waste with a 113mm white plastic flange and a 56mm tail. It features a top access design and a backnut model, making it easy to install and maintain.
The high flow design of the SWHF1-WH shower waste ensures that water flows away from the shower quickly and efficiently, preventing blockages and backups. The 113mm white plastic flange provides a reliable seal against the shower tray, and is designed to be both durable and stylish.
The shower waste features a 56mm tail that can be easily connected to standard UK plumbing, and its backnut model allows for easy installation and maintenance. The top access design means that the waste can be easily accessed from above, making it easy to clean and maintain.
The McAlpine SWHF1-WH shower waste is suitable for use in a wide range of shower enclosures and trays, and its versatile design makes it a popular choice among plumbing professionals. It is compatible with most shower tray designs and can be used in conjunction with other McAlpine plumbing products to create a complete plumbing system.
Overall, the McAlpine SWHF1-WH high flow shower waste is a reliable and effective solution for ensuring that water flows away from the shower efficiently. Its high-quality construction and easy-to-use design make it a popular choice among homeowners and plumbing professionals alike.
・ Available in 1½" and 2" sizes
・ 56mm Tail available in White or Chrome Plated Plastic
・ 113mm White Plastic slotted cover flange
・ White plastic Backnut
・ Top access for easy cleaning
The McAlpine STW85GP is a standard waste designed for use with STW 1½" shower traps. This waste features a chrome plated finish for a sleek look and is made from high-quality materials to ensure durability and longevity. The STW85GP is easy to install and comes with all necessary fittings and seals to ensure a secure and leak-free connection. It is suitable for use in both domestic and commercial applications and is compatible with most standard shower trays.
・ Available in White, Chrome Plated or Gold Plated Plastic, or Chrome Plated Brass
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 22mm
The McAlpine STW19-TUBE is a dip tube designed for use with McAlpine STW 1½" shower traps. It is made from white plastic and is designed to be inserted into the trap body to create a dip in the water level, which helps to maintain the water seal and prevent foul odors and gases from entering the bathroom.
The dip tube is easy to install and can be easily removed for cleaning and maintenance. It is a cost-effective solution for preventing unpleasant odors and gases from entering the bathroom, and is particularly useful in situations where the trap may not be used regularly, such as in guest bathrooms or vacation homes.
Overall, the McAlpine STW19-TUBE is a simple but effective accessory for McAlpine STW 1½" shower traps, providing an additional layer of protection against unpleasant odors and gases.
・ Available for 19mm, 50mm and 80mm Shower Traps
・ Suitable of use with STW range of 1½" Shower Traps
・ Full range of spare parts and accessories are available on The Plumbers Mate
The McAlpine Chrome Plated Brass Flange & Dip Tube (ST90CBTOP+TUBE) is a specific plumbing fitting used in conjunction with a shower trap. The flange and dip tube are designed to be installed in the shower tray or bath to provide a neat and tidy finish to the plumbing installation.
The ST90CBTOP+TUBE features a chrome-plated brass flange, which sits flush with the surface of the shower tray or bath. The flange has a 90mm diameter and is designed to be used with a McAlpine shower trap.
The dip tube, which is also included with the ST90CBTOP+TUBE, is made from high-quality materials and is designed to fit into the shower trap. It is designed to prevent water from flowing back into the trap and causing foul odours.
Overall, the McAlpine Chrome Plated Brass Flange & Dip Tube (ST90CBTOP+TUBE) is a specific plumbing fitting used in conjunction with a shower trap to provide a neat and tidy finish to the plumbing installation. Its high-quality materials and chrome-plated finish make it a durable and stylish option for many plumbing applications.
The McAlpine Universal Bend 135 Deg x BSP Loose Coup Nut 1.5" ST90-Out is a plumbing fitting designed to connect two pipes at a 135-degree angle. The fitting features a universal design, making it suitable for use with a range of pipe sizes and types. It comes with a BSP loose coupling nut that allows for easy installation and secure fitting. The fitting is made from durable materials and is resistant to corrosion, ensuring long-lasting performance. The ST90-Out designation indicates that this fitting is suitable for use with a soil pipe system.
・ 1½" Universal Outlet
・ Universal Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine DC90-BL is a 90-degree bend drain connector with an 'O' seal socket designed to fit a 4"/110mm diameter pipe that conforms to BS 4514 specifications.
The purpose of this drain connector is to provide a smooth and reliable connection between two sections of 4"/110mm diameter pipe that need to be joined at a 90-degree angle. The 'O' seal socket helps to ensure a watertight seal between the connector and the pipe, which is essential for preventing leaks and ensuring proper drainage.
The McAlpine DC90-BL is made from high-quality materials and is designed to meet the highest standards of durability and reliability. It is suitable for use in both residential and commercial plumbing applications, and is commonly used in waste water and drainage systems.
When installing the McAlpine DC90-BL, it is important to follow the manufacturer's instructions carefully to ensure a proper fit and a watertight seal. This may involve using additional fittings or adapters, depending on the specific plumbing configuration. It is also important to ensure that the pipe is properly supported and secured to prevent any movement or damage over time.
・ Available in Black and Grey
・ 90° Bend
・ Finned seal spigot for internal connection to 4"/110mm cast iron, plastic or clay
・ Ideal for low level connections
・ O' seal socket fits 4"/110mm pipe to BS 4514
The McAlpine DC1BL-OS is a drain connector designed to connect 4"/110mm pipes to BS 4514. It features a 14mm offset, which allows for a more flexible and adjustable installation. The drain connector also includes an 'O' seal socket, which helps to ensure a secure and leak-proof connection.
To use the McAlpine DC1BL-OS, first ensure that the 4"/110mm pipe you are connecting to is to BS 4514 standards. Then, insert the pipe into the 'O' seal socket on the drain connector, making sure that it is securely seated. The offset design of the connector allows for some flexibility in the angle of the pipe, which can be useful in certain installation scenarios.
Overall, the McAlpine DC1BL-OS is a high-quality and reliable drain connector that can help to ensure a secure and leak-free connection between 4"/110mm pipes and BS 4514 standard drainage systems.
・ Available in Black and Grey
・ 14mm Offset
・ Finned seal spigot for internal connection to 4"/110mm cast iron, plastic or clay
・ Ideal for low level connections
・ O' seal socket fits 4"/110mm pipe to BS 4514
The McAlpine Sink Overflow Stopper is a simple and effective accessory designed to prevent water from overflowing through the sink's overflow hole. It is an essential accessory for any sink that does not have an overflow prevention system built-in, as it provides a backup measure against water damage.
Made from high-quality materials, the McAlpine Sink Overflow Stopper is durable and built to last. It is designed to fit securely into most standard sink overflow holes, ensuring that water won't leak through the opening. The stopper features a convenient handle, making it easy to insert and remove from the overflow hole.
The McAlpine Sink Overflow Stopper is also incredibly easy to use. Simply place it into the sink's overflow hole and push down to create a seal. To remove it, just pull it out using the handle. It's that simple!
The McAlpine Sink Overflow Stopper is an essential accessory for anyone looking to prevent water damage from sink overflows. Its high-quality construction, ease of use, and compatibility with most standard sink overflow holes make it a popular choice for homeowners, DIY enthusiasts, and professional plumbers alike.
In summary, the McAlpine Sink Overflow Stopper is a reliable and practical accessory for anyone looking to prevent water damage from sink overflows. Its durable construction, easy-to-use design, and compatibility with most standard sink overflow holes make it a must-have accessory for any sink without an overflow prevention system built-in. Upgrade your sink today with the McAlpine Sink Overflow Stopper!
・ Mounted on Card with Hanging Slot
・ Sink Overflow Stopper
・ Black Plastic overflow grid
The McAlpine Stainless Steel Pop-Up Plug is a sleek and modern accessory that will add a touch of sophistication to your bathroom sink. The plug is made of high-quality stainless steel, which gives it a sturdy construction and a premium look.
The stainless steel material used in the construction of the plug is resistant to rust and corrosion, ensuring that the plug will remain in great condition for years to come. It's also easy to clean and maintain, making it a hygienic and practical choice for any bathroom.
Installation of the McAlpine Stainless Steel Pop-Up Plug is a breeze. Simply insert the plug into your sink's waste opening and push down to close it. To release the water, push down on the plug again. The plug is designed to work seamlessly with your existing plumbing system and is compatible with most sink waste openings.
The McAlpine Stainless Steel Pop-Up Plug is an excellent choice for anyone looking to upgrade their bathroom sink waste plug accessory or replace an old one. Its premium construction, easy installation, and modern design make it a popular choice for homeowners, DIY enthusiasts, and professional plumbers alike.
In summary, the McAlpine Stainless Steel Pop-Up Plug is a must-have accessory for any modern bathroom sink. Its durable construction, easy installation, and sleek design make it a reliable and stylish choice for any household. Upgrade your sink waste plug accessory today with the McAlpine Stainless Steel Pop-Up Plug.
・ Mounted on Card with Hanging Slot
・ Stainless Steel Pop-Up Plug
・ Manufactured in Stainless steel
The McAlpine BSW10P Centre Pin Bath Waste is a plumbing accessory designed for use in bathtubs. Here's a breakdown of its key features:
Centre Pin: The centre pin refers to the mechanism that controls the flow of water through the waste. In this case, it's a "pop-up" style waste, meaning that when you push down on the centre pin, the waste will open and allow water to drain out of the bathtub. When you push down on the pin again, it will pop back up and close the waste.
Bath Waste: A bath waste is a plumbing component that connects the drain in the bathtub to the plumbing system of the building. It's designed to allow water to drain out of the bathtub, while also preventing any debris or other items from clogging the pipes.
70mm Stainless Steel Flange: The flange is the part of the waste that sits on top of the bathtub and secures the waste in place. In this case, the flange is made of stainless steel, which is a durable and corrosion-resistant material.
Black PVC Plug: The plug is the part of the waste that seals the drain when the waste is closed. In this case, the plug is made of black PVC, which is a type of plastic that's known for its strength and durability.
Overall, the McAlpine BSW10P Centre Pin Bath Waste is a high-quality plumbing accessory that's designed to provide reliable performance and long-lasting durability.
・ Available in 1¼" or 1½¿
・ Black PVC plug
・ Available with or without CP chain
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
Introducing the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70, the perfect solution for securing and sealing plumbing fixtures.
Crafted from high-quality brass with a nickel finish, this ferrule is designed to withstand exposure to moisture and chemicals, making it a reliable choice for both residential and commercial plumbing systems.
The McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is designed with a threaded configuration, which allows for a more secure and watertight seal. It's easy to install, simply screw the ferrule onto the threaded fixture until it fits snugly in place.
This ferrule is an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Whether you're looking to secure a plumbing fixture or need to repair a damaged plumbing system, the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is an excellent solution.
In addition to its functional benefits, the nickel finish adds an elegant touch to any plumbing system. The ferrule is also lightweight and compact, making it easy to store and transport.
In summary, the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is an essential component for anyone looking to maintain a secure and watertight plumbing system. With its easy installation, high-quality construction, and compatibility with a range of plumbing fixtures, this ferrule is an excellent choice for a range of applications.
・ Manufactured in Nickel Plated Brass
・ Other sizes available
The McAlpine BN1 White Plastic Backnut with Rubber Washer is a plumbing accessory used to secure a pipe or fitting in place. The backnut is made of white plastic and has a threaded inner surface that allows it to be screwed onto the corresponding threaded end of a pipe or fitting. The backnut is also equipped with a rubber washer that provides a tight seal between the backnut and the pipe or fitting, preventing leaks.
The McAlpine BN1 White Plastic Backnut with Rubber Washer is commonly used in plumbing installations where a secure and leak-free connection is required, such as in bathrooms, kitchens, and other areas where water is used. The backnut is easy to install and requires no special tools or expertise, making it a popular choice among both professional plumbers and DIY enthusiasts.
Overall, the McAlpine BN1 White Plastic Backnut with Rubber Washer is a reliable and cost-effective plumbing accessory that can help ensure a safe and leak-free plumbing installation.
Size: 1.25" BSP ・ Available in 1.5" BSP, 1¾" BSP and 2" BSP・ Available in 4 flange sizes・ White Plastic
The McAlpine T28M-NRV Multifit In-Line Non-Return Valve is a plumbing component designed to prevent backflow of water or sewage in a drainage system. It is installed in-line with the pipe and allows water to flow in one direction only.
The valve is made of durable plastic and features a top access for easy cleaning and maintenance. This means that if the valve becomes clogged with debris or sediment, it can be easily accessed and cleaned without having to remove the entire valve from the pipe.
The Multifit design of the valve means that it can be used with a variety of different pipe materials and sizes, making it a versatile choice for many different plumbing applications.
Overall, the McAlpine T28M-NRV Multifit In-Line Non-Return Valve with top access for cleaning is a reliable and easy-to-maintain option for preventing backflow in a drainage system.
・ Available in 1¼" and 1½" sizes
・ Prevents back flow of water
・ Must be installed in the horizontal position
・ Should only be used when there is no alternative
・ Universal Connections
