JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Layflat Polybutylene Barrier Pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Layflat polybutylene barrier pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Layflat polybutylene barrier pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Layflat polybutylene barrier pipe offers greater flexibility than standard polybutylene and PEX pipe, making long pipe runs and cabling through joists faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
When removed from the coil, the pipe ‘lays flat and stays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components. Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe makes cabling fast and simple
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit tool-free service valve allows isolation of fixtures and appliances for installation using the integrated handle. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit tool-free service valve is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Quickly connects an appliance to the water supply
Integrated 1/4 turn shut off valve
Tool-free push-fit connection with hand tighten tap
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit white PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit red and blue PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit red and blue PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Colour codes for easy identification of water services
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit red and blue PEX barrier pipe length is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit red and blue PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Colour codes for easy identification of water services
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
Designed with two extra o-rings, these Superseal pipe inserts deliver an enhanced dual-action seal as well as creating a more rigid connection between a JG Speedfit pipe and push-fitting. Each of the inserts in this pack of 25 provides valuable extra support for your pipework, ensuring that pipe ends keep their round shape.
• Suitable for JG Speedfit pipes and fittings only
• Two extra o-rings provide improved sealing
• Creates a rigid connection and provides extra support to pipework
• Suitable for hot and cold water services
• Can be used on central heating systems
• Minimum operating temperature of 20°C
• Maximum operating temperature of 105°C
• 12 bar maximum operating pressure at minimum temperature
• 3 bar maximum operating pressure at maximum temperature
• 50-year manufacturer’s guarantee (T&Cs apply)
• Manufactured to BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
• Standard TSM inserts must be used when connecting to a compression fitting
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID STS22
Warranty (years) 50
Diameter (mm) 22
Pack Size 2
Fitting Type Pipe Inserts
JG Speedfit PEX barrier pipe coil is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.
The JG Speedfit PEX barrier pipe coil is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch. Designed, manufactured and assembled in the UK.
Lightweight flexible pipe but with a more rigid property than Polybutylene
Less fittings, less labour and material costs, less potential leak points
Safe and non-toxic material with no need for hot works
Resists corrosion and scale build up, reducing pin hole leaks and blockages
Pipe elasticity reduces the chance of burst pipes in freezing conditions
Considerably reduces the noise of water hammer
Suitable for hot and cold water and central heating systems
Designed with two extra o-rings, this Superseal pipe insert delivers an enhanced dual-action seal as well as creating a more rigid connection between a JG Speedfit pipe and push-fitting. These inserts provide valuable extra support for your pipework, ensuring that pipe ends keep their round shape.
• Suitable for JG Speedfit pipes and fittings only
• Two extra o-rings provide improved sealing
• Creates a rigid connection and provides extra support to pipework
• Suitable for hot and cold water services
• Can be used on central heating systems
• Minimum operating temperature of 20°C
• Maximum operating temperature of 105°C
• 12 bar maximum operating pressure at minimum temperature
• 3 bar maximum operating pressure at maximum temperature
• 50-year manufacturer’s guarantee (T&Cs apply)
• Manufactured to BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
• Standard TSM inserts must be used when connecting to a compression fitting
SPECIFICATION
A Size 15 mm
Brand JG Speedfit
CE Standard (Tested to EN...) BS 7291, KM 39767.
Manufacturer Guarantee 50 Year Manufacturer's Guarantee (T&Cs Apply)
Max. Pressure @ Max. Temperature 12 bar
Max. Pressure @ Min. Temperature 12 bar
Maximum Operating Temperature 95 °C
Minimum Operating Temperature 4 °C
Model Name Superseal
Pack Size 2
Pieces in Pack/Case 2
Pipe Fitting Material Plastic
Pipe Fitting Product Type Inserts
Pipe Fitting System Push-Fit
Product Type Pipe Inserts
Designed with two extra o-rings, this Superseal pipe insert delivers an enhanced dual-action seal as well as creating a more rigid connection between a JG Speedfit pipe and push-fitting. These inserts provide valuable extra support for your pipework, ensuring that pipe ends keep their round shape.
• Suitable for JG Speedfit pipes and fittings only
• Two extra o-rings provide improved sealing
• Creates a rigid connection and provides extra support to pipework
• Suitable for hot and cold water services
• Can be used on central heating systems
• Minimum operating temperature of 20°C
• Maximum operating temperature of 105°C
• 12 bar maximum operating pressure at minimum temperature
• 3 bar maximum operating pressure at maximum temperature
• 50-year manufacturer’s guarantee (T&Cs apply)
• Manufactured to BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
• Standard TSM inserts must be used when connecting to a compression fitting
SPECIFICATION
A Size 10 mm
Brand JG Speedfit
CE Standard (Tested to EN...) BS 7291, KM 39767.
Manufacturer Guarantee 50 Year Manufacturer's Guarantee (T&Cs Apply)
Max. Pressure @ Max. Temperature 12 bar
Max. Pressure @ Min. Temperature 12 bar
Maximum Operating Temperature 95 °C
Minimum Operating Temperature 4 °C
Model Name Superseal
Pack Size 4
Pieces in Pack/Case 4
Pipe Fitting Material Plastic
Pipe Fitting Product Type Inserts
Pipe Fitting System Push-Fit
Product Type Pipe Inserts
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins.
Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system.
All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe.
Push-fit plastic fitting for the connection of plastic and copper pipe.
The valve allows isolation of appliances such as a washing machine or dishwasher for maintenance or installation.
Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place, then push the valve fully on to the pipe and thread the appliance hose on to the valve.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site.
• Suitable for hot and cold water services, NOT suitable for central heating systems
• BS EN 7291 parts 1, 2, 3 and S, WRAS approved
• Secure and easy demounting without the need for a tool
• 50 year guarantee
• Minimum operating temperature - 20 °C
• Maximum operating temperature - 65 °C
• Maximum operating pressure at minimum temperature - 12 BAR
• Maximum operating pressure at maximum temperature - 3 BAR
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID 15APT
Warranty (years) 50
Diameter (mm) 15
Pack Size 1
Fitting Type Valve
This valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair.
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins.
Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system.
All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe.
Push-fit plastic fitting for the connection of plastic and copper pipe.
The push-fit stop valve for the connection of plastic and copper pipe. A must for any dwelling. The valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair.
Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site.
• Suitable for hot and cold water services, NOT suitable for central heating systems
• BS EN 7291 parts 1, 2, 3 and S, WRAS approved
• Secure and easy demounting without the need for a tool
• 50 year guarantee
• Minimum operating temperature - 20 °C
• Maximum operating temperature - 65 °C
• Maximum operating pressure at minimum temperature - 12 BAR
• Maximum operating pressure at maximum temperature - 3 BAR
Technical specification
Brand JG Speedfit
Material Plastic
Manufacturer ID 15STV/2
Warranty (years) 50
Diameter (mm) 15
Pack Size 1
Fitting Type Stop Cock
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins.
Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system.
All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe.
The push-fit brass chrome plated service valve for the connection of plastic and copper pipe.
The valve allows the user to stop the flow of water to a tap in case of emergency or repair via a 1/4 turn of a screw on the valve.
To install, simply push the valve fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
• Suitable for hot and cold water services, NOT central heating systems
• BS EN 7291 parts 1, 2, 3 and S, WRAS approved
• Secure and easy demounting without the need for a tool
• 50 year guarantee
• Minimum operating temperature - 20 °C
• Maximum operating temperature - 105 °C
• Maximum operating pressure at minimum temperature - 12 BAR
• Maximum operating pressure at maximum temperature - 3 BAR
Technical specification
Brand JG Speedfit
Colour Grey
Material Plastic
Manufacturer ID 15SV
Warranty (years) 50
Diameter (mm) 15
Pack Size 1
Fitting Type Valve
Peace of mind protection from accidental pipe disconnection
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK.
Features and benefits
Colour coded for easy identification of supply type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
Application
Hot and cold water and central heating systems
Purpose
Peace of mind protection from accidental pipe disconnection
Peace of mind protection from accidental pipe disconnection
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK.
Features and benefits
Colour coded for easy identification of supply type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
Application
Hot and cold water and central heating systems
Purpose
Peace of mind protection from accidental pipe disconnection
