John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK. Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 2
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Pack of 5Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
Connect equally-sized pipes to form a 90° pipe bend quickly and securely with this JG Speedfit 15mm elbow. It can be installed in seconds, and no tools are needed – simply push it fully onto the pipe and twist the plastic nut clockwise to lock in place. This Twist & Lock mechanism secures the fitting and adds compression too. At up to 40% faster to install than traditional methods, JG Speedfit equal elbow push-fit fittings are much easier to use in confined spaces as there’s no need for hot works or tools. Demounting the connection is equally easy. Just unlock the nut by hand and push the collet towards the body of the fitting, then pull the pipe to release. JG Speedfit blends push-fit and multi-seal technology for a reliable leak-proof connection. Suitable for use with plastic or copper pipe, you can create a truly flexible plumbing and heating system, and complete the job in no time.• Push-fit system is easy to use for faster installation times• Provides a secure and reliable leak-proof connection• Install or demount in seconds, without the need for tools• Suitable for hot and cold water services• Can be used on central heating systems and combi systems• Minimum operating temperature of 20°C • Maximum operating temperature of 105°C• 12 bar maximum operating pressure at minimum temperature• 3 bar maximum operating pressure at maximum temperature• 50-year guarantee • Manufactured to BS EN 7291 Parts 1, 2, 3 and S• WRAS-approved• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipeTechnical specificationBrand JG SpeedfitColour WhiteMaterial PlasticManufacturer ID PEM01315WWarranty (years) 50Angle (°) 90Diameter (mm) 15Pack Size 4Fitting Type Elbow Equal or Reducing Equal
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.Instant push-fit connectionInstall and demount in seconds without toolsSafe flame-free installation, with no hot works, glue or fluxGrip & Seal collet with stainless steel teeth and main O-Ring sealTwist & Lock mechanism secures fitting and adds compressionNon-toxic, resists corrosion and no scale build-upCompatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipeSuitable for hot and cold water and central heating systemsPack of 2
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems Suitable for Speedfit pipes and fittings onlyPack of 150
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems Suitable for Speedfit pipes and fittings onlyPack of 100
Quick to connect screw down mains stop valve
JG Speedfit stop valve allows the user to stop the flow of water to a fixture or zone in the event of an emergency or for repair work. Simply push the valve fully onto the pipe. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
Compact design is ideal for installing in areas where space is tight
Instant push-fit connection and screw down mains stop valve
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
Quick to connect screw down mains stop valve
JG Speedfit stop valve allows the user to stop the flow of water to a fixture or zone in the event of an emergency or for repair work. Simply push the valve fully onto the pipe. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
Compact design is ideal for installing in areas where space is tight
Instant push-fit connection and screw down mains stop valve
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
Quickly connects double check valve for fluid category 3 backflow prevention with integrated isolation
JG Speedfit double check service valve ensures water only flows through in one direction to prevent the backflow of contaminants. The valves ensures that water only flows through in one direction to prevent the backflow of contaminants. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit double check service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Double check valve (Fluid Category 3)
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
The McAlpine BSW2P 60mm Stainless Steel Flange Centre Pin Basin Waste with Black PVC Plug is a plumbing component used to remove wastewater from a basin or sink.
Here is some more information about this product:
The waste has a 60mm diameter flange, which is made of stainless steel. The flange is the part that sits on top of the basin/sink and secures the waste in place.
The centre pin refers to the metal rod in the middle of the waste, which opens and closes the waste by moving up and down.
The black PVC plug is the component that seals the waste and prevents water from leaking out of the basin/sink. The plug can be removed to allow water to drain out.
This waste is designed for use with basins/sinks that have a 60mm waste outlet.
Overall, the McAlpine BSW2P 60mm Stainless Steel Flange Centre Pin Basin Waste with Black PVC Plug is a durable and reliable component that can help ensure the proper functioning of a plumbing system.
・ Available in 1¼" or 1½¿
・ Black PVC plug
・ Available with or without chain and stay
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine BSW21PC Centre Pin Sink Waste is a plumbing component designed for use with a sink. It features an 85mm stainless steel flange with a plug, which is used to seal the sink and prevent water from draining out.
The centre pin design of this sink waste allows for easy installation and removal, making it a convenient choice for plumbers and DIY enthusiasts alike. The stainless steel construction of the flange and plug ensures durability and longevity, as it is resistant to corrosion and rust.
Overall, the McAlpine BSW21PC Centre Pin Sink Waste is a reliable and practical option for anyone in need of a sink waste for their plumbing system.
・ Available in 1¼", 1½" and 2" sizes
・ Black PVC plug
・ Available with or without chain and stay
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine BSW21P Centre Pin Sink Waste is a plumbing component that is used to connect a sink to the drainage system. The waste has a stainless steel flange with a diameter of 85mm, which is designed to fit into the sink's waste hole. The waste also comes with a plug that can be used to stop the flow of water through the sink.
The "Centre Pin" in the name refers to the design of the waste. Instead of using a traditional screw-in waste, which can be difficult to install and prone to leaks, the Centre Pin waste uses a unique locking mechanism. This makes it easier to install and provides a more secure fit, reducing the risk of leaks.
Overall, the McAlpine BSW21P Centre Pin Sink Waste is a high-quality plumbing component that is designed to provide a long-lasting and reliable connection between your sink and the drainage system.
・ Available in 1¼", 1½" and 2" sizes
・ Black PVC plug
・ Available with or without chain and stay
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine BSW2 1¼" White Plastic Basin Waste - Backnut Model: 60mm Stainless Steel Flange x 3½" Tail with Black PVC Plug is a type of plumbing fixture used to drain water from a sink or basin.
The waste is made of white plastic and has a diameter of 1¼". It comes with a backnut model that is designed to secure the waste in place. The flange is made of stainless steel and has a diameter of 60mm. The tail of the waste is 3½" long and is also made of stainless steel.
The black PVC plug is used to stop water from flowing through the waste when needed. This type of basin waste is commonly used in bathrooms and kitchens, and is designed to be easy to install and maintain.
・ Available Slotted or Unslotted
・ 1¼" BSP
・ 60mm flange
・ 3½" Tail
・ White Plastic Backnut
The McAlpine BSW15PC 1½" Centre Pin Bath Waste is a plumbing fitting used to drain water from a bathtub.
Here's a breakdown of each component:
1½" Centre Pin: This refers to the size of the waste fitting, which has a diameter of 1½ inches. The centre pin is the central component of the waste fitting and is used to secure the waste to the bathtub.
Bath Waste: This is the part of the fitting that connects to the bathtub and allows water to drain out.
70mm Stainless Steel Flange: This is the component of the waste fitting that sits on top of the bathtub and covers the hole where the water drains out. The flange is made of stainless steel, which is durable and resistant to rust.
Black PVC Plug: This is a removable stopper that fits into the waste fitting to prevent water from draining out of the bathtub. The plug is made of black PVC, which is a type of plastic that is resistant to corrosion and chemical damage.
Overall, the McAlpine BSW15PC 1½" Centre Pin Bath Waste is a high-quality and durable plumbing fitting that is designed to ensure efficient drainage of water from your bathtub.
・ 1½" BSP
・ Black PVC plug
・ Available with or without CP chain
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine BSW15P is a bath waste system with a 1½" center pin and a black PVC plug. The system features a 70mm stainless steel flange that provides a secure and durable seal for the waste outlet.
This type of bath waste is commonly used in plumbing installations where a 1½" diameter waste outlet is required, and the black PVC plug is designed to prevent water from draining out of the bathtub. The stainless steel flange provides a sturdy base for the waste system and helps to ensure that it remains in place during use.
Overall, the McAlpine BSW15P is a reliable and functional bath waste system that is suitable for use in a range of different plumbing applications.
・ 1½" BSP
・ Black PVC plug
・ Available with or without CP chain
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine BSW11P is a basin waste fitting made of stainless steel, with a 1¼" diameter and a 60mm flange. The flange provides a secure fixing point for the basin waste to the basin. The waste also features a center pin, which is used to prevent blockages by allowing water to flow freely.
In addition to the waste fitting, the package includes a backnut and washer for the basin bracket if required. The backnut and washer are used to secure the basin waste to the basin, ensuring a watertight seal.
The package also includes a black PVC plug, which is used to block the waste outlet when the basin is not in use. The plug is easily removable for cleaning or maintenance.
Overall, the McAlpine BSW11P is a high-quality and durable basin waste fitting, ideal for use in bathrooms and washrooms.
・ 1¼" BSP
・ Black PVC plug
・ Available with or without chain and stay
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine BSW10P-F is a shower waste with a 70mm stainless steel flange and a centre pin model. It is designed to be used in showers to remove wastewater and prevent blockages.
The centre pin model means that the waste has a central pin that helps to prevent hair and other debris from clogging the drain. The 70mm stainless steel flange provides a durable and attractive finish to the waste, which can complement the overall look of the shower.
The McAlpine BSW10P-F shower waste is made from high-quality materials and is designed to be easy to install. It is suitable for use in a range of shower types and can help to improve the functionality and hygiene of your bathroom.
・ Available in 1¼" and 1½" sizes
・ 70mm Stainless Steel flange
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
・ Manufactured in Polypropylene
The McAlpine BSW10 1½" Backnut Bath Waste is a type of waste fitting for a bathtub that includes a 70mm stainless steel flange and a 1½" tail. The tail is unslotted, meaning that it does not include any holes or perforations for water drainage.
The waste also includes a plug, which can be used to stop the flow of water from the bathtub. The plug can be removed when the bathtub needs to be emptied.
Overall, the McAlpine BSW10 1½" Backnut Bath Waste is a durable and reliable option for any bathtub that requires a waste fitting with a 1½" tail and a 70mm flange.
・ 1½" BSP
・ Black PVC plug
・ White Plastic Backnut
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
・ 1½" Tail
Introducing the McAlpine Black PVC Plug 2.25" BP5, the perfect solution for sealing off unused plumbing fixtures.
Crafted from high-quality black PVC, this plug is designed to withstand exposure to a range of chemicals and temperature variations, making it a reliable choice for both residential and commercial plumbing systems.
The McAlpine Black PVC Plug 2.25" BP5 is designed to fit securely into any 2.25" diameter plumbing fixture, providing a watertight seal that prevents leaks and water damage. It's easy to install, simply push the plug into the fixture until it fits snugly in place.
This plug is an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Whether you're looking to seal off an unused fixture or need to repair a damaged plumbing system, the McAlpine Black PVC Plug 2.25" BP5 is an excellent solution.
In addition to its functional benefits, the black PVC material blends seamlessly with a range of plumbing fixtures and systems. The plug is also lightweight and compact, making it easy to store and transport.
In summary, the McAlpine Black PVC Plug 2.25" BP5 is an essential component for anyone looking to maintain a watertight plumbing system. With its easy installation, high-quality construction, and compatibility with a range of plumbing fixtures, this plug is an excellent choice for a range of applications.
・ Available in 1½", 1¾" and 2"
・ Available with or without triangle
・ Manufactured in Black PVC
McAlpine BRASSTRAP-25-CP is a 1½" chrome plated brass trap that is commonly used in plumbing systems to prevent sewer gases from entering the building. It is made of high-quality materials and is designed to be durable and long-lasting.
The trap is also equipped with a combined waste and overflow system that includes a 70mm spring-loaded mushroom plug and a matching overflow face. This system helps to prevent water from overflowing from the sink or tub by diverting excess water through the overflow channel.
The chrome plating on the trap and overflow system gives them a sleek and polished appearance, making them an attractive addition to any bathroom or kitchen. Additionally, the chrome finish makes them easy to clean and maintain.
Overall, the McAlpine BRASSTRAP-25-CP is a reliable and high-quality plumbing component that is suitable for a wide range of applications.
・ Available with 25mm or 50mm Water Seal
・ 1½" Universal Outlet
・ Manufactured in Chrome Plated Brass
Introducing the McAlpine Black PVC Plug 1 3/4" BP4T, the perfect solution for sealing off unused plumbing fixtures in a threaded configuration.
Crafted from high-quality black PVC, this plug is designed to withstand exposure to a range of chemicals and temperature variations, making it a reliable choice for both residential and commercial plumbing systems.
The McAlpine Black PVC Plug 1 3/4" BP4T is designed with a threaded configuration, which allows for a more secure and watertight seal. It's easy to install, simply screw the plug into the threaded fixture until it fits snugly in place.
This plug is an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Whether you're looking to seal off an unused fixture or need to repair a damaged plumbing system, the McAlpine Black PVC Plug 1 3/4" BP4T is an excellent solution.
In addition to its functional benefits, the black PVC material blends seamlessly with a range of plumbing fixtures and systems. The plug is also lightweight and compact, making it easy to store and transport.
In summary, the McAlpine Black PVC Plug 1 3/4" BP4T is an essential component for anyone looking to maintain a watertight plumbing system in a threaded configuration. With its easy installation, high-quality construction, and compatibility with a range of plumbing fixtures, this plug is an excellent choice for a range of applications.
・ Available in 1½", 1¾" and 2"
・ Available with or without triangle
・ Manufactured in Black PVC
Introducing the McAlpine Black PVC Plug 1 3/4" BP4, the perfect solution for sealing off unused plumbing fixtures.
Crafted from high-quality black PVC, this plug is designed to withstand exposure to a range of chemicals and temperature variations, making it a reliable choice for both residential and commercial plumbing systems.
The McAlpine Black PVC Plug 1 3/4" BP4 is designed to fit securely into any 1 3/4" diameter plumbing fixture, providing a watertight seal that prevents leaks and water damage. It's easy to install, simply push the plug into the fixture until it fits snugly in place.
This plug is an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Whether you're looking to seal off an unused fixture or need to repair a damaged plumbing system, the McAlpine Black PVC Plug 1 3/4" BP4 is an excellent solution.
In addition to its functional benefits, the black PVC material blends seamlessly with a range of plumbing fixtures and systems. The plug is also lightweight and compact, making it easy to store and transport.
In summary, the McAlpine Black PVC Plug 1 3/4" BP4 is an essential component for anyone looking to maintain a watertight plumbing system. With its easy installation, high-quality construction, and compatibility with a range of plumbing fixtures, this plug is an excellent choice for a range of applications.
・ Available in 1½", 1¾" and 2"
・ Available with or without triangle
・ Manufactured in Black PVC
Introducing the McAlpine Black PVC Plug 1 1/2" BP3, the perfect solution for sealing off unused plumbing fixtures.
This high-quality plug is crafted from durable black PVC, designed to withstand exposure to a range of chemicals and temperature variations, making it a reliable choice for both residential and commercial plumbing systems.
Designed to fit securely into any 1 1/2" diameter plumbing fixture, this plug provides a watertight seal, preventing leaks and water damage. It's easy to install, simply push the plug into the fixture until it fits snugly in place.
The McAlpine Black PVC Plug 1 1/2" BP3 is an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Whether you're looking to seal off an unused fixture or need to repair a damaged plumbing system, this plug is an excellent solution.
In addition to its functional benefits, the black PVC material blends seamlessly with a range of plumbing fixtures and systems. The plug is also lightweight and compact, making it easy to store and transport.
In summary, the McAlpine Black PVC Plug 1 1/2" BP3 is an essential component for anyone looking to maintain a watertight plumbing system. With its easy installation, high-quality construction, and compatibility with a range of plumbing fixtures, this plug is an excellent choice for a range of applications.
・ Available in 1½", 1¾" and 2"
・ Available with or without triangle
・ Manufactured in Black PVC
Introducing the McAlpine BP2H 1¾" Black Plastic Plug with Handle and Rubber Seal, the perfect solution for sealing off plumbing fixtures with ease.
This high-quality plug is designed with a convenient handle for easy installation and removal. The handle provides a comfortable grip, making it easy to insert and extract the plug from the plumbing fixture. The rubber seal ensures a watertight fit, preventing leaks and water damage.
Crafted from durable black plastic, the McAlpine BP2H 1¾" Black Plastic Plug with Handle and Rubber Seal is built to last. It can withstand exposure to a range of chemicals and temperature variations, making it a reliable choice for both residential and commercial plumbing systems.
Designed to fit snugly into any 1¾" diameter plumbing fixture, this plug provides a secure and watertight seal. It's easy to install and remove, making it an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike.
In addition to its ease of use and durability, the black plastic material blends seamlessly with a range of plumbing fixtures and systems. The plug is also lightweight and compact, making it easy to store and transport.
In summary, the McAlpine BP2H 1¾" Black Plastic Plug with Handle and Rubber Seal is an essential component for anyone looking to maintain a watertight plumbing system. With its convenient handle, rubber seal, and high-quality construction, this plug is an excellent choice for a range of applications.
・ For use wtih 1½" waste outlet fittings
・ Manufactured in black polypropylene
Introducing the McAlpine Black Plastic Captive Plug 1 3/4" Diameter BP2-CAP, the perfect solution for sealing off unused plumbing fixtures.
Crafted from high-quality black plastic, this captive plug is designed to fit snugly into any 1 3/4" diameter plumbing fixture, providing a secure and watertight seal. It's easy to install, simply push the captive plug into the fixture until it clicks into place, and it's ready to use.
The McAlpine Black Plastic Captive Plug 1 3/4" Diameter BP2-CAP is ideal for use in a range of applications, from residential to commercial plumbing systems. Whether you're a plumber, DIY enthusiast, or simply need to seal off an unused fixture, this captive plug is the perfect choice.
In addition to its ease of use and versatility, the captive plug's black color allows it to blend seamlessly with a range of plumbing fixtures and systems. It's also designed to withstand exposure to a range of chemicals and temperature variations, ensuring that it remains effective in all conditions.
In summary, the McAlpine Black Plastic Captive Plug 1 3/4" Diameter BP2-CAP is an essential component for anyone looking to maintain a watertight plumbing system. With its easy installation, high-quality construction, and compatibility with a range of plumbing fixtures, this captive plug is an excellent choice for homeowners, plumbers, and professionals alike.
・ Available in 1½"and 1¾"
・ Only for use with McAlpine wastes which have a centre pin fixing
・ Manufactured in black polypropylene
The McAlpine Black Plastic Captive Plug BP1-Cap is a plumbing component used to cap off a 1 1/2" diameter pipe. It is made of black plastic and is designed to be easily installed and removed, making it a convenient solution for plumbing maintenance and repair.
The term "captive plug" refers to the fact that the plug is designed to remain attached to the pipe even when it is removed. This helps prevent the plug from getting lost or misplaced, and makes it easier to reinsert the plug when needed.
Overall, the McAlpine Black Plastic Captive Plug BP1-Cap is a simple yet effective plumbing component that is commonly used in residential and commercial plumbing systems.
・ Available in 1½"and 1¾"
・ Only for use with McAlpine wastes which have a centre pin fixing
・ Manufactured in black polypropylene
The McAlpine BOSSCONN82Z-GR is a grey mechanical soil pipe boss connector that is designed to connect a 4"/110mm soil pipe to a 57mm hole saw size. This product comes with a fixing tool that makes it easy to install and use.
The McAlpine BOSSCONN82Z-GR is made of durable materials that are resistant to corrosion and can withstand high levels of pressure. It is suitable for use in a range of applications, including domestic and commercial plumbing.
To install the McAlpine BOSSCONN82Z-GR, you will need to drill a 57mm hole in the soil pipe where you want to connect the connector. Once the hole is drilled, simply insert the connector into the hole and use the supplied fixing tool to tighten it in place.
Overall, the McAlpine BOSSCONN82Z-GR is a reliable and easy-to-use connector that is ideal for connecting a 4"/110mm soil pipe to a 57mm hole saw size.
・ Available to suit 4'/110mm and 3"/82mm soil pipe
・ Available for 1¼" and 1½" waste pipe size
・ Suitable for waste water and condensate discharge
・ Simple dry fixing mechanical connection
・ Universal connection for pushfit or solvent weld waste pipe
The McAlpine BOSSCONN82Z-BL Black Mechanical Soil Pipe Boss Connector is a plumbing fitting designed for creating a connection to a soil pipe using a 57mm hole saw. It is suitable for a 4"/110mm soil pipe and is supplied with a fixing tool for installation.
The boss connector features a mechanical jointing system that provides a secure and watertight connection to the soil pipe. The black finish is designed to blend in with black soil pipes.
To install the boss connector, a 57mm hole should be cut in the soil pipe using a suitable hole saw. The fixing tool can then be used to tighten the connector onto the pipe. The boss connector can then be connected to the pipework of the appliance that needs to be connected to the soil pipe.
It is important to ensure that the boss connector is installed correctly and securely to prevent leaks and potential damage to the plumbing system. If you are not familiar with plumbing installations, it is recommended to seek the assistance of a professional plumber.
・ Available to suit 4'/110mm and 3"/82mm soil pipe
・ Available for 1¼" and 1½" waste pipe size
・ Suitable for waste water and condensate discharge
・ Simple dry fixing mechanical connection
・ Universal connection for pushfit or solvent weld waste pipe
The McAlpine BN5 White Plastic Backnut with Rubber Washer is a plumbing accessory used to secure a pipe or fitting in place. The backnut is made of white plastic and has a threaded inner surface that allows it to be screwed onto the corresponding threaded end of a pipe or fitting. The backnut is also equipped with a rubber washer that provides a tight seal between the backnut and the pipe or fitting, preventing leaks. The McAlpine BN5 White Plastic Backnut with Rubber Washer is commonly used in plumbing installations where a secure and leak-free connection is required, such as in bathrooms, kitchens, and other areas where water is used. The backnut is easy to install and requires no special tools or expertise, making it a popular choice among both professional plumbers and DIY enthusiasts. Overall, the McAlpine BN5 White Plastic Backnut with Rubber Washer is a reliable and cost-effective plumbing accessory that can help ensure a safe and leak-free plumbing installation. Size: 2" BSP ・ Available in 1.25” BSP, 1.5" BSP, 1.75" BSP and 2" BSP・ Available in 4 flange sizes・ White Plastic
The McAlpine BATHTRAP25-CPB is a chrome-plated brass bath trap designed for use with a 1½" universal outlet. It features a 25mm water seal to prevent odors and gases from escaping from the drainage system into your bathroom.
The bath trap is an essential component of any bathtub installation, as it helps to trap any debris and prevent it from clogging the plumbing system. The McAlpine BATHTRAP25-CPB is a high-quality option that is built to last, with a durable brass construction and a sleek chrome finish that will complement any bathroom décor.
Installation is straightforward and can be completed using basic plumbing tools. The bath trap should be fitted below the bathtub, connecting the waste outlet to the drainage system. It is important to ensure that all connections are tight and secure to prevent leaks.
Overall, the McAlpine BATHTRAP25-CPB is a reliable and effective solution for your bathtub plumbing needs. Its high-quality construction and easy installation make it a popular choice among homeowners and plumbers alike.
・ Available with 25mm or 50mm Water Seal
・ 1½" Universal Outlet
・ Manufactured in Chrome Plated Brass
Introducing the McAlpine Bath Overflow Grid Gold Plated Bathgrid, the perfect finishing touch to elevate the look of your bathtub.
This elegant and sophisticated bath overflow grid features a stunning gold-plated finish that will add a touch of luxury to any bathroom. Crafted from high-quality materials, this bath grid is designed to withstand the rigors of daily use and provide long-lasting durability.
Designed to fit most standard bathtubs, the McAlpine Bath Overflow Grid Gold Plated Bathgrid features a classic design that complements a range of bathroom styles, from modern to traditional.
Installation is quick and easy, with no special tools required. Simply remove the existing overflow grid from your bathtub and replace it with the McAlpine Bath Overflow Grid Gold Plated Bathgrid. The grid is designed to fit securely and snugly in place, ensuring that it won't move or slip.
In addition to its stunning appearance, the McAlpine Bath Overflow Grid Gold Plated Bathgrid also serves a functional purpose, preventing water from overflowing and causing damage to your bathroom floor. With its durable construction and elegant design, this bath grid is the perfect addition to any bathroom.
In summary, the McAlpine Bath Overflow Grid Gold Plated Bathgrid is an essential component for anyone looking to elevate the look of their bathtub while also ensuring functional performance. With its stunning gold-plated finish, easy installation, and long-lasting durability, this bath grid is an excellent choice for homeowners, decorators, and professionals alike.
・ Manunfactured in Gold Plated Plastic
・ Available in Chrome Plated Plastic
The McAlpine ASE10V is a plumbing component commonly used in bathrooms and kitchens to trap and prevent the backflow of sewer gases into the living space. It is designed as a "P" trap, which is a type of plumbing trap that forms a water seal to prevent the escape of unpleasant odors and gases.
The ASE10V model features a 75mm water seal and an adjustable inlet that can swivel, making it easier to install in a variety of different plumbing configurations. It also includes an anti-syphon mechanism called a Silentrap, which helps to prevent the siphoning of water from the trap and the potential loss of the water seal.
The ASE10V trap has a universal outlet, which means it can be connected to a range of different drain sizes and configurations. This makes it a versatile and commonly used plumbing component in both residential and commercial applications.
It is important to note that the McAlpine ASE10V trap should be installed by a qualified plumbing professional to ensure it is fitted correctly and performs as intended.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Universal Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
The McAlpine ARW10 Rubber Washer is a spare part used for the bottle trap cup in plumbing systems. It is a small, circular rubber washer designed to fit around the rim of the bottle trap cup, which is used to prevent sewer gases from escaping into the home or building.
The McAlpine ARW10 Rubber Washer is made from high-quality rubber material, which makes it durable and resistant to wear and tear. It is designed to provide a tight seal between the bottle trap cup and the waste pipe, ensuring that no water or gases leak out.
When installing the McAlpine ARW10 Rubber Washer, it is important to ensure that it is properly aligned and seated around the rim of the bottle trap cup. This will ensure a secure and watertight seal, which is crucial for preventing leaks and ensuring the proper functioning of the plumbing system.
Overall, the McAlpine ARW10 Rubber Washer is a reliable and essential component of any plumbing system that uses a bottle trap cup. It is easy to install and provides long-lasting protection against leaks and other plumbing issues.
・ Available for A10, C10 and E10 Bottle Traps
Introducing the McAlpine Rubber Washer for Bottle Trap Cup ARW1, the perfect solution to ensure a watertight seal for your bottle trap cup.
Designed specifically for McAlpine Bottle Trap Cup ARW1, this rubber washer provides exceptional durability and longevity, ensuring that your plumbing system is leak-free for years to come.
The high-quality rubber construction is resistant to deformations and cracks over time, making it a reliable and long-lasting addition to your plumbing system. It's also designed to withstand exposure to a range of chemicals and temperature variations, ensuring that it remains effective in all conditions.
The washer's easy-to-install design makes it quick and simple to replace old or worn-out washers. Simply remove the old washer from the bottle trap cup and slip the new McAlpine Rubber Washer into place. The washer's precise fit ensures that it won't slip or move around, providing a secure and leak-free seal.
In summary, the McAlpine Rubber Washer for Bottle Trap Cup ARW1 is an essential component for anyone looking to maintain a leak-free plumbing system. With its durable construction, easy installation, and compatibility with McAlpine Bottle Trap Cup ARW1, this washer is an excellent choice for homeowners, plumbers, and professionals alike.
・ Manunfactured in Rubber
The McAlpine ABS42/43A-CB is a 90-degree compression bend made of chrome-plated brass, designed to connect to ABS solvent weld pipes. Compression fittings are designed to make secure and leak-proof connections between pipes without the need for soldering or welding.
ABS, or acrylonitrile butadiene styrene, is a type of thermoplastic polymer commonly used in drain, waste, and vent (DWV) systems. ABS solvent weld pipes are joined using a solvent cement, which chemically bonds the pipes together.
The McAlpine ABS42/43A-CB compression bend is designed to be used with ABS solvent weld pipes to create a bend in the pipe. The compression fitting is tightened onto the pipe using a compression nut, creating a tight seal between the fitting and the pipe.
The chrome-plated brass construction of the compression bend provides durability and resistance to corrosion. The bend is designed to withstand high-pressure and high-temperature applications, making it suitable for use in both residential and commercial plumbing systems.
・ Available in 1¼" and 1½" sizes
・ 1¼" version supplied with 2 rubber washers allowing chrome compression nut to fit on to 32mm European or 35mm UK chrome brass pipe
The McAlpine AA10W is a basin trap with an adjustable inlet and a water seal of 75mm. It has a 1.25" multifit outlet, which means it can fit a range of waste pipes with different diameters.Basin traps are an essential component of any plumbing system, as they prevent unpleasant odors and gases from entering the building from the sewer. The water seal acts as a barrier that stops the gases from passing through the trap and into the room.The adjustable inlet of the McAlpine AA10W makes it easy to connect to different types of waste pipes, including those with different angles and offsets. This flexibility is essential in situations where the waste pipe is not in the ideal position for a standard trap.Overall, the McAlpine AA10W is a reliable and versatile basin trap that is suitable for a wide range of plumbing applications.・ 75mm Water Seal・ 1.25" Multifit Compression Outlet suits all plastic, copper and lead pipe・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work・ Manufactured in polypropylene・ Complete with 60mm Ø Polished Stainless Steel Waste Flange, Centre Pin fixing and dry jointing Washers, Plug, CP Chain and Stay
