The McAlpine T18L is a straight connector fitting that is part of the Surefit range of push-fit plumbing fittings and pipes made by McAlpine. The T18L is designed to connect two 1 1/2-inch pipes in a straight line, without the need for special tools or adhesives.
The T18L connector features a push-fit connection on both ends, which allows for quick and easy installation. The connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to create a watertight seal between the two pipes.
It's important to note that the T18L connector is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T18L connector is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T20L is a 135-degree bend fitting that is part of the Surefit range of push-fit plumbing fittings and pipes made by McAlpine. The T20L is designed to connect two 1 1/2-inch pipes at a 135-degree angle, without the need for special tools or adhesives.
The T20L bend fitting features a push-fit connection on both ends, which allows for quick and easy installation. The connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to create a watertight seal between the two pipes.
It's important to note that the T20L bend fitting is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T20L bend fitting is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
The McAlpine T21A is a caulking ferrule that is designed to provide a watertight seal between a 2-inch waste pipe and a 1 1/2-inch soil pipe. The T21A ferrule is part of the Multifit range of plumbing fittings and pipes made by McAlpine.
The T21A caulking ferrule features a flexible rubber construction, which allows it to be compressed and fitted into the end of a 2-inch waste pipe. The ferrule is then pushed onto the 1 1/2-inch soil pipe and sealed using a suitable caulk or sealant to provide a watertight seal.
The T21A caulking ferrule is designed to be used with both plastic and copper pipes, and is suitable for use in a range of plumbing applications, including domestic and commercial installations. It's important to note that the T21A caulking ferrule is designed specifically for use with the McAlpine Multifit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T21A caulking ferrule is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine T22L is a 1 1/2-inch extension piece fitting that is used to extend the length of a pipe. The T22L is part of the Multifit range of plumbing fittings and pipes made by McAlpine.
The T22L extension piece features a push-fit connection on both ends, which allows for quick and easy installation. The connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to create a watertight seal between the two pipes.
The T22L extension piece is designed to be used with both plastic and copper pipes, and is suitable for use in a range of plumbing applications, including domestic and commercial installations. It's important to note that the T22L extension piece is designed specifically for use with the McAlpine Multifit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T22L extension piece is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
・ Available in 1¼" and 1½" sizes
・ Overall Height is 7"
・ Effective length 5"
・ Available longer or shorter on application
The McAlpine T23 is a blank cap fitting that is designed to seal off the end of a pipe or fitting. The T23 blank cap is part of the BSP range of plumbing fittings and pipes made by McAlpine.
The T23 blank cap features a BSP thread on the inside of the cap, which allows it to be screwed onto a pipe or fitting with a corresponding BSP thread. The cap also features a nut, which can be tightened to provide a secure and watertight seal.
The T23 blank cap is made of durable plastic, which is lightweight and corrosion-resistant, and is suitable for use in a range of plumbing applications, including domestic and commercial installations. It's important to note that the T23 blank cap is designed specifically for use with the McAlpine BSP system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T23 blank cap is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine T23L is a blank cap fitting that is designed to seal off the end of a 1 1/2-inch pipe or fitting in the Surefit range of plumbing fittings and pipes made by McAlpine.
The T23L blank cap features a push-fit connection on one end, which allows for quick and easy installation. The cap is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when fitted onto the end of a pipe or fitting.
The T23L blank cap is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T23L blank cap is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T23L blank cap can be used to temporarily seal off a pipe or fitting during maintenance or repair work, or as a permanent seal for pipes or fittings that are no longer in use.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T26L is a reducer set for use with the Surefit range of plumbing fittings and pipes made by McAlpine. The T26L reducer set includes two fittings: a 2-inch to 1 1/2-inch reducer and a 1 1/2-inch blank cap.
The 2-inch to 1 1/2-inch reducer features a push-fit connection on both ends, allowing for quick and easy installation. The reducer is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when connected to two different sizes of pipes or fittings.
The 1 1/2-inch blank cap is designed to be used with the T26L reducer to seal off the end of a 1 1/2-inch pipe or fitting. The blank cap features a push-fit connection, which allows for quick and easy installation.
The T26L reducer set is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T26L reducer set is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T26L reducer set is commonly used in plumbing installations where a larger pipe needs to be reduced down to a smaller size, such as in a drain or waste pipe system.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T28L is a straight connector designed to connect a 1 1/2-inch pipe or fitting in the McAlpine Surefit range to a Multifit or universal fitting. The T28L straight connector features a push-fit connection on one end that is compatible with the McAlpine Surefit range of plumbing fittings and pipes, and a compression connection on the other end that is designed to fit onto a Multifit or universal fitting.
The T28L straight connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when connected to pipes or fittings. The push-fit connection on the Surefit end of the T28L connector allows for quick and easy installation, while the compression connection on the Multifit end provides a secure and reliable connection.
The T28L straight connector is designed specifically for use with the McAlpine Surefit range of plumbing fittings and pipes, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T28L straight connector is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T28L straight connector is commonly used in plumbing installations where a Surefit pipe or fitting needs to be connected to a Multifit or universal fitting.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 1 1/2" Pipe Clip T30 is a plumbing component used to secure 1 1/2" pipes to walls or other surfaces. It is designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The pipe clip is made from high-quality materials, ensuring durability and longevity. It features a T30 design, which provides a strong and secure hold for the pipe. The clip is easy to install and requires no special tools or equipment.
The McAlpine 1 1/2" Pipe Clip T30 is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for securing pipes in bathrooms, kitchens, utility rooms, and other areas where plumbing is required.
Overall, the McAlpine 1 1/2" Pipe Clip T30 is a reliable and effective plumbing component that provides a secure and long-lasting solution for securing 1 1/2" pipes.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T30-CLAMP 1½" Pipe Clip is a plumbing component designed for use in floor-mounted discharge pipe installations. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The pipe clip is made from high-quality materials, ensuring durability and longevity. It features a T30 design, which provides a strong and secure hold for the pipe. The clip is easy to install and requires no special tools or equipment.
The McAlpine T30-CLAMP 1½" Pipe Clip is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for securing pipes in bathrooms, kitchens, and other areas where plumbing is required.
The floor-mounted discharge pipe installation requires secure and reliable support, which is provided by the McAlpine T30-CLAMP 1½" Pipe Clip. It ensures that the discharge pipe is held firmly in place and prevents any unwanted movement or vibration.
Overall, the McAlpine T30-CLAMP 1½" Pipe Clip is a reliable and effective plumbing component that provides a secure and long-lasting solution for floor-mounted discharge pipe installations.
・ For floor mounted discharge installations
・ Suitable for 1½" pipe
・ For use in conjunction with T30-SPACER
The McAlpine T30-SPACER is a stackable gradient spacer designed for use with the T30-CLAMP pipe clip in plumbing applications. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The spacer is made from high-quality materials, ensuring durability and longevity. It features a stackable design, which allows for easy customization and adjustment to the required gradient of the pipe installation. The spacer is easy to install and requires no special tools or equipment.
The McAlpine T30-SPACER is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use with the T30-CLAMP pipe clip, ensuring that the discharge pipe is held securely in place and maintaining the required gradient for optimal flow.
The stackable design of the spacer allows for easy adjustment of the required gradient, making it a versatile and adaptable component for various plumbing installations. It is designed to withstand the rigors of plumbing environments and provides a secure and long-lasting solution for supporting discharge pipes.
Overall, the McAlpine T30-SPACER is a reliable and effective plumbing component that provides a customizable and secure solution for supporting discharge pipes in plumbing installations when used in conjunction with the T30-CLAMP pipe clip.
・ Allows for fall of varying degrees
・ For use in conjunction with T30-CLAMP
The McAlpine T4A Pushfit 90° Overflow Bend is a plumbing component designed for use in overflow systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The overflow bend is made from high-quality materials, ensuring durability and longevity. It features a 90° bend design, which provides a smooth and efficient flow of excess water in overflow systems. The pushfit mechanism makes it easy to install and requires no special tools or equipment.
The McAlpine T4A Pushfit 90° Overflow Bend is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in overflow systems for sinks, baths, and other plumbing fixtures.
The pushfit mechanism of the overflow bend allows for easy and secure installation, ensuring a tight and leak-free fit. The 90° bend design provides a smooth flow of excess water, preventing any potential damage to plumbing fixtures and ensuring optimal performance of the overflow system.
Overall, the McAlpine T4A Pushfit 90° Overflow Bend is a reliable and effective plumbing component that provides a secure and efficient solution for managing excess water in overflow systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼" and 1½" sizes
The McAlpine T4E Pushfit 90° Knuckle Overflow Bend is a plumbing component designed for use in overflow systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The overflow bend is made from high-quality materials, ensuring durability and longevity. It features a 90° knuckle bend design, which provides a smooth and efficient flow of excess water in overflow systems. The pushfit mechanism makes it easy to install and requires no special tools or equipment.
The McAlpine T4E Pushfit 90° Knuckle Overflow Bend is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in overflow systems for sinks, baths, and other plumbing fixtures.
The pushfit mechanism of the overflow bend allows for easy and secure installation, ensuring a tight and leak-free fit. The 90° knuckle bend design provides a smooth flow of excess water, preventing any potential damage to plumbing fixtures and ensuring optimal performance of the overflow system.
Overall, the McAlpine T4E Pushfit 90° Knuckle Overflow Bend is a reliable and effective plumbing component that provides a secure and efficient solution for managing excess water in overflow systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼" and 1½" sizes
The McAlpine 1 1/2" 90 Degree Surefit Bend T4L is a plumbing component designed for use in waste pipe systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The surefit bend is made from high-quality materials, ensuring durability and longevity. It features a 90 degree bend design, which provides a smooth and efficient flow of waste water in waste pipe systems. The surefit mechanism makes it easy to install and requires no special tools or equipment.
The McAlpine 1 1/2" 90 Degree Surefit Bend T4L is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in waste pipe systems for sinks, baths, showers, and other plumbing fixtures.
The surefit mechanism of the bend allows for easy and secure installation, ensuring a tight and leak-free fit. The 90 degree bend design provides a smooth flow of waste water, preventing any potential blockages or damage to plumbing fixtures and ensuring optimal performance of the waste pipe system.
Overall, the McAlpine 1 1/2" 90 Degree Surefit Bend T4L is a reliable and effective plumbing component that provides a secure and efficient solution for managing waste water in waste pipe systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 1 1/2" 90 Degree Multifit Bend X Bsp Coupling Nut T5M is a plumbing component designed for use in waste pipe systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The multifit bend is made from high-quality materials, ensuring durability and longevity. It features a 90 degree bend design, which provides a smooth and efficient flow of waste water in waste pipe systems. The multifit mechanism makes it easy to install and allows for a wide range of connections to different pipe materials, including copper, lead, iron, PVC, and polypropylene.
The BSP coupling nut allows for easy and secure connection to the waste pipe. It features a standard BSP thread, which is compatible with a wide range of plumbing systems.
The McAlpine 1 1/2" 90 Degree Multifit Bend X Bsp Coupling Nut T5M is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in waste pipe systems for sinks, baths, showers, and other plumbing fixtures.
The multifit mechanism of the bend allows for easy and secure installation, ensuring a tight and leak-free fit. The 90 degree bend design provides a smooth flow of waste water, preventing any potential blockages or damage to plumbing fixtures and ensuring optimal performance of the waste pipe system.
Overall, the McAlpine 1 1/2" 90 Degree Multifit Bend X Bsp Coupling Nut T5M is a reliable and effective plumbing component that provides a secure and efficient solution for managing waste water in waste pipe systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine T7 Pushfit Overflow Adaptor is a plumbing component designed for use in overflow systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The overflow adaptor is made from high-quality materials, ensuring durability and longevity. It features a pushfit mechanism, which makes it easy to install and requires no special tools or equipment. The adaptor is designed to connect an overflow system to a waste pipe, allowing excess water to be safely discharged.
The McAlpine T7 Pushfit Overflow Adaptor is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in overflow systems for sinks, baths, and other plumbing fixtures.
The pushfit mechanism of the overflow adaptor allows for easy and secure installation, ensuring a tight and leak-free fit. It is compatible with a wide range of plumbing systems and can be used with a variety of pipe materials, including copper, lead, iron, PVC, and polypropylene.
Overall, the McAlpine T7 Pushfit Overflow Adaptor is a reliable and effective plumbing component that provides a secure and efficient solution for managing excess water in overflow systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼" and 1½" sizes
The McAlpine 1 1/2" BSP Nut T8A is a plumbing component designed for use in waste pipe systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The BSP nut is made from high-quality materials, ensuring durability and longevity. It features a standard BSP thread, which is compatible with a wide range of plumbing systems. The nut is designed to securely connect to a 1 1/2" waste pipe, providing a tight and leak-free fit.
The McAlpine 1 1/2" BSP Nut T8A is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in waste pipe systems for sinks, baths, showers, and other plumbing fixtures.
The nut is designed for easy installation and can be tightened by hand or with a wrench. It is compatible with a wide range of pipe materials, including copper, lead, iron, PVC, and polypropylene.
Overall, the McAlpine 1 1/2" BSP Nut T8A is a reliable and effective plumbing component that provides a secure and efficient solution for connecting waste pipes to plumbing systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine 1 1/2" BSP Compression Nut T8B is a plumbing component designed for use in waste pipe systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The compression nut is made from high-quality materials, ensuring durability and longevity. It features a standard BSP thread and compression fitting, which is compatible with a wide range of plumbing systems. The nut is designed to securely connect to a 1 1/2" waste pipe, providing a tight and leak-free fit.
The McAlpine 1 1/2" BSP Compression Nut T8B is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in waste pipe systems for sinks, baths, showers, and other plumbing fixtures.
The compression fitting of the nut is designed for easy installation and can be tightened by hand or with a wrench. It provides a secure and watertight seal, ensuring that waste water is properly managed and discharged. The nut is compatible with a wide range of pipe materials, including copper, lead, iron, PVC, and polypropylene.
Overall, the McAlpine 1 1/2" BSP Compression Nut T8B is a reliable and effective plumbing component that provides a secure and efficient solution for connecting waste pipes to plumbing systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine 1 1/2" Multifit Loose Nut T8M is a plumbing component designed for use in waste pipe systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The loose nut is made from high-quality materials, ensuring durability and longevity. It features a Multifit design, which is compatible with a wide range of plumbing systems. The nut is designed to securely connect to a 1 1/2" waste pipe, providing a tight and leak-free fit.
The McAlpine 1 1/2" Multifit Loose Nut T8M is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in waste pipe systems for sinks, baths, showers, and other plumbing fixtures.
The loose nut is designed for easy installation and can be tightened by hand or with a wrench. It provides a secure and watertight seal, ensuring that waste water is properly managed and discharged. The nut is compatible with a wide range of pipe materials, including copper, lead, iron, PVC, and polypropylene.
Overall, the McAlpine 1 1/2" Multifit Loose Nut T8M is a reliable and effective plumbing component that provides a secure and efficient solution for connecting waste pipes to plumbing systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine T9 Pushfit BSP Screwed Overflow Adaptor is a plumbing component designed for use in overflow systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The overflow adaptor features a pushfit connection on one end and a BSP screwed connection on the other end. This allows it to be easily connected to a wide range of overflow systems. The pushfit end of the adaptor is designed to securely connect to a 1 1/2" waste pipe, providing a tight and leak-free fit.
The McAlpine T9 Pushfit BSP Screwed Overflow Adaptor is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in overflow systems for sinks, baths, showers, and other plumbing fixtures.
The adaptor is designed for easy installation and can be tightened by hand or with a wrench. It provides a secure and watertight seal, ensuring that overflow water is properly managed and discharged. The adaptor is compatible with a wide range of pipe materials, including copper, lead, iron, PVC, and polypropylene.
Overall, the McAlpine T9 Pushfit BSP Screwed Overflow Adaptor is a reliable and effective plumbing component that provides a secure and efficient solution for connecting overflow systems to plumbing systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼" and 1½" sizes
The McAlpine TAPSTOP-SS Stainless Steel Tap Hole Stopper is a plumbing accessory designed for use in kitchen and bathroom sinks. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The tap hole stopper is made from high-quality stainless steel, ensuring durability and longevity. It features a simple and sleek design that can seamlessly blend with any sink design. The stopper is designed to be inserted into a standard tap hole, providing a tight and secure fit.
The McAlpine TAPSTOP-SS Stainless Steel Tap Hole Stopper is suitable for use in a wide range of sink applications, including in domestic and commercial settings. It is ideal for use in situations where a tap is no longer required or a sink has a spare hole that needs to be covered.
The stopper is easy to install and can be fitted in seconds. It provides a secure and watertight seal, ensuring that water does not leak through the tap hole. The stopper is compatible with a wide range of sink materials, including ceramic, stainless steel, and composite.
Overall, the McAlpine TAPSTOP-SS Stainless Steel Tap Hole Stopper is a reliable and effective plumbing accessory that provides a simple and cost-effective solution for covering unwanted tap holes in sinks. It is easy to install, durable, and designed to withstand the rigors of daily use.
The McAlpine TAPSTOP-WH White Plastic Tap Hole Stopper is a plumbing accessory designed for use in kitchen and bathroom sinks. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The tap hole stopper is made from high-quality white plastic, ensuring durability and longevity. It features a simple and sleek design that can seamlessly blend with any sink design. The stopper is designed to be inserted into a standard tap hole with a 17mm long thread, providing a tight and secure fit.
The McAlpine TAPSTOP-WH White Plastic Tap Hole Stopper is suitable for use in a wide range of sink applications, including in domestic and commercial settings. It is ideal for use in situations where a tap is no longer required or a sink has a spare hole that needs to be covered.
The stopper is easy to install and can be fitted in seconds. It provides a secure and watertight seal, ensuring that water does not leak through the tap hole. The stopper is compatible with a wide range of sink materials, including ceramic, stainless steel, and composite.
Overall, the McAlpine TAPSTOP-WH White Plastic Tap Hole Stopper is a reliable and effective plumbing accessory that provides a simple and cost-effective solution for covering unwanted tap holes in sinks. It is easy to install, durable, and designed to withstand the rigors of daily use.
The McAlpine TILE-PLAIN-P 150mm Square Stainless Steel Tile Drain is a plumbing accessory designed for use in wet rooms and other tiled areas. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The tile drain features a 150mm square stainless steel grate that is designed to be installed flush with the surrounding floor tiles, providing a sleek and modern look. The drain is designed to be used with a 50mm water seal trap body, which ensures that odors from the drainage system do not escape into the room.
The McAlpine TILE-PLAIN-P 150mm Square Stainless Steel Tile Drain is suitable for use in a wide range of wet room applications, including in domestic and commercial settings. It is ideal for use in situations where a shower or wet room is being installed and a discreet and stylish drain is required.
The tile drain is easy to install and can be fitted in minutes. It features a removable grate for easy cleaning and maintenance. The drain is compatible with a wide range of flooring materials, including ceramic tiles, porcelain tiles, and natural stone.
Overall, the McAlpine TILE-PLAIN-P 150mm Square Stainless Steel Tile Drain is a reliable and effective plumbing accessory that provides a stylish and practical solution for draining water in wet room environments. It is easy to install, durable, and designed to withstand the rigors of daily use.
・ Available in Brushed of Polished Stainless Steel in 5 designs
・ Tiles suitable for use with ST90-70B, ST90-HP2B or ST90-HPB Shower Traps
・ Grade 304 Stainless Steel
・ Tiles reversible to accommodate tiles up to 8mm
・ Frame height adjustable to suit tiles up to 16mm
The McAlpine TP10V 75mm Water Seal Tubular Swivel Anti-Syphon (Silentrap) All One Trap with 1¼" Multifit Outlet is a plumbing accessory designed for use in a wide range of applications, including in domestic and commercial plumbing systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The trap features a 75mm water seal and a tubular swivel anti-syphon (silentrap) design that helps to prevent the escape of foul odors and gases from the drainage system. The trap also features a 1¼" multifit outlet, which is compatible with a wide range of plumbing systems.
The McAlpine TP10V 75mm Water Seal Tubular Swivel Anti-Syphon (Silentrap) All One Trap is suitable for use in a wide range of applications, including in sinks, baths, showers, and other plumbing fixtures. It is easy to install and can be fitted in minutes, making it a popular choice among plumbers and DIY enthusiasts alike.
Overall, the McAlpine TP10V 75mm Water Seal Tubular Swivel Anti-Syphon (Silentrap) All One Trap is a reliable and effective plumbing accessory that provides a high level of protection against foul odors and gases in the drainage system. It is easy to install, durable, and designed to withstand the rigors of daily use.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
