Plumbing & Heating

The McAlpine DC90-GR is a 90-degree bend drain connector designed to connect 4"/110mm pipes to BS 4514 standards. It has an 'O' seal socket which ensures a secure and leak-free connection with the pipe. The connector is made of high-quality materials and has been designed to provide long-lasting durability and reliability. The connector is suitable for use in a variety of drainage applications, including domestic and commercial installations. Its 90-degree angle makes it ideal for use in tight spaces where a more gradual bend would not be possible. To install the McAlpine DC90-GR, simply push the 'O' seal socket onto the 4"/110mm pipe to BS 4514, ensuring a snug and secure fit. The connector can then be fixed into place using appropriate fixings, such as screws or clips. Overall, the McAlpine DC90-GR is a high-quality and reliable drain connector that provides a secure and leak-free connection between 4"/110mm pipes to BS 4514 standards. ・ Available in Black and Grey ・ 90° Bend ・ Finned seal spigot for internal connection to 4"/110mm cast iron, plastic or clay ・ Ideal for low level connections ・ O' seal socket fits 4"/110mm pipe to BS 4514

Read more less

The McAlpine ARB-1 is a 4"/110mm Anti Back-Flow and Rodent Barrier Valve that is designed to prevent sewage or wastewater from flowing back into a building's plumbing system, which could lead to contamination and health hazards. This valve is particularly useful for properties that are located in areas with a high risk of flooding or where there is a risk of sewage or wastewater backing up into the plumbing system. The valve operates by allowing sewage or wastewater to flow out of the building's plumbing system, but preventing it from flowing back in. The ARB-1 valve also includes a rodent barrier, which helps to prevent rodents and other pests from entering the building through the plumbing system. This is particularly important in areas where rodents are a common problem, as they can carry diseases and cause damage to property. Overall, the McAlpine ARB-1 valve is an important component of any building's plumbing system, as it helps to ensure the health and safety of occupants and prevent damage to the property. ・ For use with any McAlpine rigid or flexible WC connector with 4"/110mm rubber outlet seal ・ For use where special measures are necessary for control of rodents as recommended in Approved Document H1 The Building Regulations 2000 (2002 Edition) ・ Prevents back flow when fitted to WC pans as long as they are connected to the correct configuration of drain and soil pipe on a system and comply with the current building regulations and BS EN 12056-2:2000. ・ Deters rodents from entering the building through WC ・ Can be installed horizontally or vertically

Read more less

The McAlpine WC-F26RV is a flexible WC (toilet) connector that is designed to connect the toilet waste pipe to the sewer or soil pipe. The connector has a 97-107mm inlet which is intended to fit the toilet pan spigot and a 4"/110mm outlet which is designed to fit the soil pipe. The connector also has a 1¼" universal vent boss which allows for the connection of a ventilation pipe. This helps to prevent airlocks and odors from occurring in the waste pipe. The flexibility of the connector allows for easy installation, even when the toilet pan and soil pipe are not perfectly aligned. The connector is made from durable materials and is designed to provide a secure and reliable connection between the toilet and the sewer or soil pipe. Overall, the McAlpine WC-F26RV is a high-quality toilet connector that is designed to provide a reliable and long-lasting connection between the toilet and the waste pipe. ・ Available in 3 lengths ・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe ・ 97-107mm Inlet suits all pan spigots ・ Independent tests prove conclusively that there is no build-up of sediment in the flex ・ Enables easy installation of WC pans in awkward situations

Read more less

The McAlpine WC-CON8F18 is a flexible toilet connector that allows for a 90-degree bend between the toilet outlet and the soil pipe. The connector has a 97-107mm inlet, which fits into the toilet outlet, and a 4"/110mm outlet, which connects to the soil pipe. The flexibility of the connector allows for easy installation, even when there is a slight misalignment between the toilet outlet and the soil pipe. The connector is made from high-quality materials, which ensure that it is durable and long-lasting. When installing the McAlpine WC-CON8F18, it is important to ensure that it is securely attached to both the toilet outlet and the soil pipe. This will prevent any leaks or blockages from occurring. It is also important to follow the manufacturer's instructions and any relevant building codes or regulations when installing the connector. Overall, the McAlpine WC-CON8F18 is a reliable and effective solution for connecting a toilet to a soil pipe in a flexible and convenient manner. ・ Available in 2 lengths ・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe ・ 97-107mm Inlet suits all pan spigots ・ Independent tests prove conclusively that there is no build-up of sediment in the flex ・ Enables easy installation of WC pans in awkward situations

Read more less

The McAlpine WC-CON8F is a flexible WC connector used to connect a toilet pan to a soil pipe. It has an inlet diameter of 97-107mm and an outlet diameter of 4"/110mm, and is designed to create a secure and hygienic connection between the toilet and the waste pipe. The 90° bend in the connector allows it to be flexible and adjustable, making it easier to install in tight or awkward spaces. The connector is made from a durable, high-quality material that is resistant to chemicals and other substances commonly found in plumbing systems. Overall, the McAlpine WC-CON8F is a reliable and efficient solution for connecting a toilet to a soil pipe, and is a popular choice among plumbers and DIY enthusiasts alike. ・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe ・ 97-107mm Inlet suits all pan spigots ・ Adjustable Length ・ Extended Inlet ・ Complies with BS 5627:1984 and DIN 1389-2

Read more less

The McAlpine WC-CON8V is a toilet connector designed for use in plumbing installations. It has a 97-107mm inlet size and a 4"/110mm outlet size, with a 90° bend that allows for easy installation in tight spaces. The connector also features an adjustable length design, which means that it can be extended or shortened to fit the specific requirements of the installation. This can be particularly useful in situations where the toilet is located further away from the waste pipe than standard connectors can accommodate. In addition to its adjustable length design, the McAlpine WC-CON8V also includes a vent boss. This allows for the connection of a soil and vent pipe, which helps to ensure that the waste from the toilet is properly ventilated and disposed of. Overall, the McAlpine WC-CON8V is a high-quality toilet connector that is designed to provide reliable and efficient performance in a wide range of plumbing installations. Its adjustable length and vent boss features make it a versatile choice for both DIY enthusiasts and professional plumbers. ・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe ・ 97-107mm Inlet suits all pan spigots ・ Independent tests prove conclusively that there is no build-up of sediment in the flex ・ With 1¼" Universal Vent Boss ・ Supplied with blanking cap

Read more less

The McAlpine WC-CON8 is a rigid WC connector used to connect a toilet pan to a soil pipe. It has an inlet that ranges from 97mm to 107mm and an outlet of 4"/110mm, making it compatible with a range of toilet pan sizes and soil pipe diameters. The 90° bend in the connector allows for flexibility in installation, and the adjustable length feature enables it to fit different toilet and soil pipe configurations. The rigid construction of the connector ensures that it maintains its shape, even under pressure or weight, and prevents any leaks or blockages from occurring. The connector is also designed to be easy to install, with a simple push-fit connection to the toilet pan and a secure connection to the soil pipe. Overall, the McAlpine WC-CON8 is a reliable and durable WC connector that provides a secure and flexible connection between a toilet pan and soil pipe. ・ Available with finned outlet for 4"/110mm PVC-U and cast iron soil pipe diameters (internal), and with plain end outlet to fit 110mm soil or underground pipe fittings ・ 97-107mm Inlet suits all pan spigots ・ Adjustable Length ・ Complies with BS 5627:1984 and DIN 1389-2 ・ Manufactured in Polypropylene

Read more less

The McAlpine WC-CON1 is a straight rigid WC connector designed to connect a toilet pan to a soil pipe with a 4"/110mm outlet. The inlet of the connector has a diameter of 97-107mm, which is designed to fit most standard toilet pans. The connector is made of high-quality, durable materials that are resistant to chemical corrosion, making it suitable for use in both domestic and commercial settings. The McAlpine WC-CON1 is easy to install and provides a secure, leak-free connection between the toilet pan and the soil pipe. It is suitable for use with both horizontal and vertical soil pipes and can be used with most types of toilet pan. When installing the McAlpine WC-CON1, it is important to ensure that the connector is aligned correctly with the toilet pan and the soil pipe. It is also important to ensure that the connector is securely fastened to both the toilet pan and the soil pipe to prevent any leaks. Overall, the McAlpine WC-CON1 is a high-quality, reliable WC connector that is suitable for use in a wide range of applications. ・ 3½"/90mm 'O' Seal Socket ・ Finned seal spigot for internal connections to cast iron, plastic or clay 4"/110mm pipe ・ Designed for use with McAlpine Rigid or Flexible WC Connector with 4"/110mm rubber outlet seal ・ WC rubber outlet seal is removed and plain end of WC Connector is cut to length then inserted in to the 'O' seal socket ・ Ideal for low level connections

Read more less

The McAlpine WC-CON1V is a straight rigid toilet connector designed to connect a 97-107mm inlet on a toilet bowl to a 4"/110mm outlet in a soil pipe. The connector has a universal vent boss with a diameter of 1¼ inches, which allows for the connection of a ventilation pipe to prevent odors and gases from entering the bathroom. The connector is made from high-quality materials and is designed to be strong and durable. It is easy to install and can be fitted quickly and easily, providing a secure and watertight seal. The straight design of the connector ensures that waste can flow freely without any blockages or obstructions. Overall, the McAlpine WC-CON1V is a reliable and effective toilet connector that is suitable for a wide range of applications. Whether you are installing a new toilet or replacing an existing connector, this product is a great choice that is sure to provide years of trouble-free use. ・ Outlet fits 4"/110mm inside diameter of PVC-U and cast iron soil pipe ・ 97-107mm Inlet suits all pan spigots ・ Complies with BS 5627:1984 and DIN 1389-2 ・ Manufactured in Polypropylene

Read more less

The McAlpine WC-CON8E is a rigid WC (water closet) connector that is designed to connect the toilet pan to the sewage drain pipe. The connector features an extended inlet and an adjustable length that allows for easy installation and a secure fit. The connector has a 97-107mm inlet, which means it can accommodate different sizes of toilet pan outlets, and a 4"/110mm outlet, which is a standard size for most sewage drain pipes. The 90° bend in the connector allows for a smooth transition between the toilet pan outlet and the drain pipe, ensuring efficient waste removal. Overall, the McAlpine WC-CON8E is a reliable and durable WC connector that is designed to make toilet installations easy and hassle-free. ・ Available with finned outlet for 4"/110mm PVC-U and cast iron soil pipe diameters (internal), and with plain end outlet to fit 110mm soil or underground pipe fittings ・ 97-107mm Inlet suits all pan spigots ・ Adjustable Length ・ Complies with BS 5627:1984 and DIN 1389-2 ・ Manufactured in Polypropylene

Read more less

The McAlpine WC-CON8FV is a flexible WC connector with a 97-107mm inlet and a 4"/110mm outlet. It has a 90° bend and features a 1¼" universal vent boss. This type of connector is commonly used to connect a toilet to a soil pipe or a drain pipe. The 97-107mm inlet of the WC-CON8FV is designed to fit over the spigot (outlet) of a standard toilet pan, while the 4"/110mm outlet is designed to fit into a standard soil or drain pipe. The 90° bend allows the connector to be flexible, making it easier to install and adjust as needed. The 1¼" universal vent boss is an additional feature that allows for the connection of a vent pipe. Vent pipes are used to prevent the build-up of gases in the plumbing system, and they also help to maintain proper water flow. Overall, the McAlpine WC-CON8FV is a high-quality, flexible connector that is designed to make toilet installation and maintenance easier and more efficient. ・ Available for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal) ・ 97-107mm Inlet suits all pan spigots ・ Independent tests prove conclusively that there is no build-up of sediment in the flex ・ Soft synthetic rubber inlet connection ・ Worm drive hose clip provides a secure and reliable connection to the WC pan spigot prior to the final placement against the wall of furniture

Read more less

The McAlpine WC-CON-EXT is a straight telescopic WC socket extension designed for use in plumbing installations. It is commonly used to extend the waste pipe of a toilet further from the wall to allow for proper installation and clearance. The socket extension is made from high-quality materials and is designed to be durable and long-lasting. It features a telescopic design that allows it to be adjusted to the desired length, making it a versatile solution for a variety of installation needs. The McAlpine WC-CON-EXT is easy to install and comes with all necessary fittings and instructions. It is suitable for use in both domestic and commercial applications and is designed to meet relevant industry standards and regulations. Overall, if you need to extend the waste pipe of a toilet, the McAlpine WC-CON-EXT Straight Telescopic WC Socket Extension is a reliable and effective solution that is easy to install and built to last. ・ Available with finned outlet for 4"/110mm PVC-U and cast iron soil pipe diameters (internal), and with plain end outlet to fit 110mm soil or underground pipe fittings ・ 97-107mm Inlet suits all pan spigots ・ Adjustable Length ・ With 1¼" Universal Vent Boss ・ Supplied with blanking cap

Read more less

The McAlpine R28-NRV Non-Return Valve is a plumbing accessory that prevents the backflow of water or other fluids in a pipeline system. It features 19/23mm universal connections that allow easy installation in a variety of plumbing configurations. The valve is made from high-quality materials, making it durable and resistant to corrosion and wear. The valve's non-return function ensures that fluids can only flow in one direction, preventing contamination of potable water or damage to plumbing fixtures. This makes it a useful component in any plumbing system, particularly in applications where wastewater or other contaminated fluids are present. ・ With 19/23mm Universal Connections

Read more less

The McAlpine TUNVALVE Tunvalve is a clear valve designed to fit onto a WC overflow outlet with a ¾" female thread. The valve's 19/23mm universal outlet allows easy connection to a variety of plumbing configurations. The valve's clear design makes it easy to see whether it is functioning properly and to detect any blockages or other issues. The TUNVALVE Tunvalve is an effective accessory for preventing water wastage and damage caused by overflow. It can also be used in combination with other plumbing components to regulate the flow of water in a plumbing system. Its easy installation, durability, and clear design make it a useful addition to any plumbing system.

Read more less

The McAlpine SOAK1GR Soakaway Container is a product designed for use in drainage systems. It is made from high-density polyethylene and has a capacity of 160 litres. The container is designed to be used with limestone chippings as the filtration medium. The dimensions of the SOAK1GR container are 110mm x 300mm x 1¼"/1½", which is the size of the pipe top and side inlet connections. This means that it can be easily connected to standard 110mm drainage pipes. The purpose of a soakaway is to allow excess water from a drainage system to be dispersed into the surrounding ground. The McAlpine SOAK1GR container is designed to be used as part of a soakaway system, providing a means of containing and filtering the excess water before it is dispersed. Overall, the McAlpine SOAK1GR Soakaway Container is a high-quality product that is designed to provide reliable and efficient drainage solutions. It is easy to install and use, making it an excellent choice for anyone who needs a reliable soakaway container for their drainage system. ・ 110mm x 300mm x 1¼"/1½" Pipe Inlet Connection ・ For use with limestone chippings ・ Receives discharge from a condensing boiler ・ For external use only ・ 19/23mm x 32mm solvent weld fitting provided to increase size of discharge pipe before it passes through external wall

Read more less

The McAlpine CONVALVE is an in-line vertical non-return valve that is designed for use with pipes that have an inlet and outlet connection of 19/23mm. This valve is typically used to prevent the backflow of water or other fluids in a piping system. The valve is made from high-quality materials and is designed to be durable and long-lasting. It features a compact and lightweight design that makes it easy to install and use. The valve is also easy to maintain and clean, which helps to ensure that it continues to function properly over time. The non-return valve works by allowing fluid to flow through the pipe in one direction only. If there is a backflow of fluid in the opposite direction, the valve will automatically close to prevent the fluid from entering the system. This helps to prevent contamination of the fluid and ensures that the system remains safe and functional. Overall, the McAlpine CONVALVE is a reliable and effective non-return valve that is ideal for use in a wide range of piping systems. Whether you are installing a new system or upgrading an existing one, this valve is a great choice for ensuring the safety and functionality of your piping system. ・ 19/23mm Inlet and Outlet ・ Prevents waste water from sanitary pipework entering a condensing boiler ・ Receives the discharge from a condensing boiler ・ Conforms to BS 6798:2009 and Building Regulations Approved Document H

Read more less

The McAlpine DC2-BL 4"/110mm Drain Connector is a plumbing component used to connect a 4 inch/110mm plastic waste pipe to a drainage system. It comes with a sealing ring that ensures a watertight connection. The DC2-BL Drain Connector is designed to fit plastic waste pipes that comply with the British Standard BS EN 1451-1:2000 and BS EN 1329-1:2000. These standards specify the requirements for pipes, fittings, and joints used in gravity drainage systems inside buildings. When installing the McAlpine DC2-BL Drain Connector, it is important to follow the manufacturer's instructions carefully to ensure a proper and secure connection. It is also important to ensure that the waste pipe is cut to the correct length and that any burrs or rough edges are removed before fitting the connector. Overall, the McAlpine DC2-BL 4"/110mm Drain Connector is a reliable and durable plumbing component that provides a secure and watertight connection between a plastic waste pipe and a drainage system. ・ Available in 1¼ / 1½", and 2" sizes ・ Finned seal spigot for internal connection to 4"/110mm cast iron, plastic or clay ・ Ideal for low level connections ・ Sealing ring to fit BS EN 1451:2000 and BS EN 1329-1-2000 plastic waste pipe ・ Manufactured in Polypropylene

Read more less

The McAlpine DC3-BL 4"/110mm Drain Connector is designed to connect plastic waste pipes to BS EN 1451-1:2000 and BS EN 1329-1:2000 standards. It features a sealing ring that ensures a watertight connection and prevents leaks. The connector is made from durable materials and is suitable for use in both residential and commercial plumbing systems. It is easy to install and can be used to connect pipes of different materials, including PVC, ABS, and polypropylene. Overall, the McAlpine DC3-BL 4"/110mm Drain Connector is a reliable and efficient plumbing fitting that can help ensure the smooth and reliable operation of your plumbing system. ・ Available in 1¼, 1½", and 2" sizes ・ Finned seal spigot for internal connection to 4"/110mm cast iron, plastic or clay ・ Ideal for low level connections ・ Sealing ring to fit BS EN 1451-1:2017 and BS EN 1329-1:2020 plastic waste pipe ・ Manufactured in Polypropylene

Read more less

The McAlpine DC4-BL Blank Cap is a fitting that is designed to seal a 4"/110mm Ø pipe made of cast iron, plastic, or clay. It is used to cap off a pipe, preventing any water or debris from entering or exiting the pipe. The blank cap is made from durable materials and is designed to provide a secure and reliable seal. It is easy to install and can be used in a wide range of applications, including domestic and commercial plumbing systems. If you need to seal a 4"/110mm Ø pipe made of cast iron, plastic, or clay, the McAlpine DC4-BL Blank Cap is a suitable choice that you can consider. However, it is always recommended to consult with a professional plumber or contractor to ensure that you are using the appropriate fittings and materials for your specific plumbing needs. ・ Suitable for sealing cast iron, plastic or clay 4"/110mm pipe ・ Manufactured in Polypropylene

Read more less

The McAlpine CAP100 is a temporary blanking off cap that is designed for use with 110mm diameter soil pipes. It is used to temporarily seal off a soil pipe during construction or maintenance work. The CAP100 is made from durable and long-lasting materials, ensuring that it can withstand the rigors of use on construction sites. It is also designed to be easy to install, with a simple push-fit mechanism that allows it to be securely attached to the end of a soil pipe without the need for additional tools or fittings. Once installed, the McAlpine CAP100 provides a reliable and effective seal, preventing any unwanted materials or debris from entering the soil pipe during construction or maintenance work. This helps to ensure that the soil pipe remains clean and free-flowing, reducing the risk of blockages or other issues that can cause problems in the future. Overall, the McAlpine CAP100 is a high-quality and reliable temporary blanking off cap that is an essential tool for anyone working with soil pipes on construction or maintenance projects. ・ For temporarily sealing 4"/110mm pipe ・ Manufactured in synthetic rubber

Read more less

The McAlpine M/Fit 90 Deg Bend 1.1/4" Ms4 is a plumbing fitting used for redirecting the flow of water or waste through a plumbing system. The bend is made of durable and lightweight material, making it easy to handle and install. The fitting is designed with a multifit connection, which means it can fit a range of different pipe sizes and types, including copper, plastic, and lead pipes. The 90-degree bend allows for a smooth change in direction of the plumbing system, reducing the risk of blockages or leaks. This McAlpine M/Fit 90 Deg Bend 1.1/4" Ms4 is a high-quality plumbing fitting designed for use in a variety of domestic and commercial plumbing applications. ・ Available in 1¼", 1½", and 2" sizes ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe

Read more less

The McAlpine M/Fit 90 Deg Bend 1.1/2" Mt4 is a plumbing fitting used in waste drainage systems. It is designed to change the direction of the pipe by 90 degrees and features a Multifit connection, which allows it to connect to a variety of different types and sizes of pipes. The fitting is made from high-quality materials, ensuring its durability and resistance to corrosion. The 1.1/2" Mt4 size is suitable for use with standard waste pipes, and the Multifit connection means that it can be easily connected to pipes made from different materials, such as plastic or copper. The McAlpine M/Fit 90 Deg Bend 1.1/2" Mt4 is a versatile and reliable plumbing fitting that can be used in a range of different plumbing applications. ・ Available in 1¼", 1½", and 2" sizes ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe

Read more less

The McAlpine M/Fit 90 Degree Bend 2" MZ4 is a plumbing fitting designed for use in drainage systems. It features a multifit connection that allows it to connect to a range of pipe sizes, making it a versatile option for various plumbing installations. The 90 degree bend is designed to change the direction of the pipe at a right angle, allowing for more efficient routing of the drainage system. The MZ4 model is specifically designed to fit 2 inch pipes, making it suitable for larger installations. The fitting is made from high-quality materials and is designed for durability and long-lasting performance. ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe ・ Available in 1¼", 1½", and 2" sizes

Read more less

The McAlpine 90-degree bend multifit X plain end is a plumbing fitting designed to connect two pipes with a 90-degree angle. This particular model has a 32mm plain end and is compatible with the Multifit range of McAlpine plumbing products. The bend is made from durable materials to withstand the rigors of plumbing and is designed for easy installation. The plain end is suitable for welding or gluing to pipes of the appropriate size and material, such as plastic or copper. The McAlpine 90-degree bend is ideal for use in domestic and commercial plumbing applications. ・ Available in 1¼", 1½", and 2" sizes ・ Plain end designed to fit in to other fittings or traps with a compression connection ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe

Read more less