The McAlpine SK2A Standard Double Bowl Kit is a plumbing kit designed to connect two sinks to a single waste pipe. It includes two sink strainers, a double bowl waste trap, and a 135-degree bend with an adjustable inlet for easy installation.
The kit is suitable for use with most domestic sinks and is made from durable materials that are resistant to corrosion and damage from household cleaning products. The double bowl waste trap is designed to prevent the build-up of harmful bacteria and is easy to clean and maintain.
Installation of the McAlpine SK2A Standard Double Bowl Kit is straightforward and can be completed by a competent DIY enthusiast or a professional plumber. The kit comes with comprehensive instructions and all the necessary fittings and fixtures.
Overall, the McAlpine SK2A Standard Double Bowl Kit is a reliable and cost-effective solution for connecting two sinks to a single waste pipe, and is ideal for use in kitchens and utility rooms.
・ Available with 1 or 2 nozzles to accept discharge from domestic appliances
・ Suitable for almost all British and European sinks
・ Supplied with an 1½" x 75mm water seal tubular swivel 'P' trap
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Can accept discharge hose of a domestic appliance
The McAlpine ST90CB10-70 is a water seal shower trap designed to prevent unpleasant odors from entering the bathroom through the shower drain. Its dimensions are 90mm x 50mm and it features a 1½" outlet.
The water seal trap works by creating a barrier of water between the bathroom and the sewer system. When water drains from the shower, it flows through the trap and creates a seal that prevents any gases or smells from coming back up into the bathroom.
The McAlpine ST90CB10-70 is made of high-quality materials and is built to last. It is also easy to install and maintain, making it a popular choice for both DIY enthusiasts and professional plumbers.
Overall, if you're in the market for a water seal shower trap with reliable performance, the McAlpine ST90CB10-70 is definitely worth considering.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 1½" Universal
The McAlpine ST90CP10-53 is a slim shower trap designed to fit beneath a shower tray or bathtub to prevent wastewater from flowing back up into the shower or bathtub. The trap features a 90mm diameter water seal and a 1½" solvent weld outlet for easy installation.
The slim design of the trap makes it ideal for use in tight spaces where traditional traps may not fit, and the water seal ensures that no foul odors can escape into the room.
Overall, the McAlpine ST90CP10-53 is a reliable and effective solution for preventing blockages and maintaining good hygiene in the bathroom.
・ Flanges available in Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ Overall height is only 53mm
・ Fixed with Stainless Steel Clamping Ring and 3 securing screws for tight connection to the shower tray
・ 25mm Water Seal
The McAlpine ST90CPB-S is a shower trap with a water seal designed to prevent odours and gases from entering the bathroom. It has a 90mm x 50mm body and a 1½" outlet, which is a standard size for most shower waste pipes.
The trap also features a removable 110mm flange, which makes it easy to clean and maintain. This flange is compatible with standard shower trays and waste fittings, making it easy to install in most bathrooms.
Overall, the McAlpine ST90CPB-S is a reliable and durable shower trap that is designed to provide effective drainage and prevent unpleasant odours and gases from entering the bathroom.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 1½" Universal
The McAlpine ST90CPB-S-53 is a slimline shower trap designed for use with 90mm shower wastes. It has a water seal of 50mm and features a 1½" solvent weld outlet. The trap is designed to prevent foul smells from entering your bathroom by trapping water inside the trap, which creates a seal that prevents gases from passing through.
The trap is made from high-quality materials and is built to last. It is easy to install and can be used with a range of different shower trays and waste pipes. The slimline design means that it can be installed in tight spaces and will not take up too much room under the shower tray.
Overall, the McAlpine ST90CPB-S-53 is a reliable and effective shower trap that is well-suited to a range of different bathroom installations. If you are looking for a high-quality shower trap that will provide reliable performance and help to keep your bathroom smelling fresh, this could be a good option to consider.
・ Flanges available in Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ Overall height is only 53mm
・ Fixed with Stainless Steel Clamping Ring and 3 securing screws for tight connection to the shower tray
・ 25mm Water Seal
McAlpine ST90CPTOP+TUBE is a chrome-plated plastic flange and dip tube designed for use with 90mm shower traps. The dip tube is designed to fit inside the shower trap and prevent debris from entering the drainage system. The flange is designed to fit over the top of the shower tray or bath, providing a neat and tidy finish.
The McAlpine ST90CPTOP+TUBE has a diameter of 113mm and is made from high-quality materials, ensuring durability and longevity. The chrome-plated finish provides an attractive and easy-to-clean surface, making it ideal for use in bathrooms and wet rooms.
Overall, the McAlpine ST90CPTOP+TUBE is a reliable and effective solution for preventing blockages and maintaining good hygiene in your shower or bath drainage system.
・ Suits ST90 Trap
・ Includes Dip Tube
・ Full range of spare parts and accessories are available on The Plumbers Mate
The McAlpine STW4-65 is a slimline shower trap designed to be installed in a shower waste pipe. It has a 20mm water seal which helps prevent foul odours and gases from entering the bathroom. The trap has a solvent weld outlet, which means it can be securely joined to a waste pipe using a solvent weld adhesive.
The slimline design of the trap means it takes up less space under the shower tray, making it ideal for installations where space is limited. The trap is made from high-quality materials, ensuring it is durable and long-lasting.
It is important to ensure that the trap is installed correctly and in accordance with the manufacturer's instructions to ensure it functions correctly and prevents any potential issues with odours or blockages in the waste pipe.
・ Chrome Plated Plastic Flange
・ Suitable for shower trays with a 50mm waste hole
・ Overall height is only 65mm
・ 20mm Water Seal
・ Supplied with 1½" loose nut x solvent weld adaptor
The McAlpine ST90WH10-70 is a water seal shower trap designed for use in showers and wet rooms. It has a 90mm x 50mm size and a 1½" outlet. The water seal design helps to prevent unpleasant odours from entering the room by creating a barrier between the shower waste and the outside air.
The trap is made from high-quality materials and is designed to be easy to install. It has a removable top section for easy cleaning and maintenance, and the trap can be easily accessed and cleaned from above.
Overall, the McAlpine ST90WH10-70 is a reliable and effective choice for anyone looking for a high-quality shower trap that will help keep their bathroom clean and fresh-smelling.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 1½" Universal
The McAlpine STW5-R is a shower trap with a 19mm water seal and a universal outlet. It is designed to be used with a shower waste to prevent unwanted odours and gases from entering the bathroom. The 19mm water seal ensures that there is always a barrier of water between the bathroom and the waste pipe, which prevents gases from escaping.
The universal outlet on this shower trap means that it can be used with a variety of different waste pipes, making it a versatile choice for many different types of shower installations. The trap is made from high-quality materials, and it is designed to be easy to install and maintain.
Overall, the McAlpine STW5-R is a reliable and effective choice for anyone looking for a shower trap with a water seal and universal outlet. It is designed to be durable, easy to use, and effective at preventing unwanted odours and gases from entering the bathroom.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 19mm Water Seal
・ 1½" BSP Thread
・ 1½" Universal Outlet
The McAlpine 1 1/4" In-Line Screened Filter Pipe Coupling is a plumbing component designed to connect two 1 1/4 inch pipes while also providing a built-in filter to prevent debris and other particles from entering the plumbing system. This coupling is commonly used in applications such as connecting sink drains to a waste pipe or connecting a washing machine drain to a standpipe.
The filter screen within the coupling is designed to capture any large particles that may pass through the pipes, preventing clogs or damage to downstream plumbing components. The coupling itself is made from durable materials such as PVC or ABS plastic, which are resistant to corrosion and can withstand exposure to a wide range of chemicals and fluids commonly found in plumbing systems. Overall, the McAlpine 1 1/4" In-Line Screened Filter Pipe Coupling is a reliable and effective plumbing component that can help prevent costly and inconvenient plumbing issues.
・ Available in ¾", 1", 1¼", 1½" and 2" sizes
The McAlpine TA32UK-CB is a tubular trap designed for use in plumbing systems. It has a 50mm water seal and is made of chrome-plated plastic, making it both durable and attractive.
The trap comes with a 12" length of 32mm ⌀ outside diameter chrome-plated brass waste pipe, which is designed to connect to the trap and carry waste water away from the plumbing fixture. The waste pipe is also durable and corrosion-resistant, ensuring that it will provide reliable service for many years.
In addition to the trap and waste pipe, the McAlpine TA32UK-CB also includes a wall flange. This component is designed to be mounted on the wall and provides a secure point of attachment for the waste pipe.
Overall, the McAlpine TA32UK-CB is a high-quality plumbing component that is well-suited for use in a variety of plumbing applications. Its durable construction and attractive design make it a popular choice among homeowners and professionals alike.
・ 32mm European Outlet
・ 50mm Water Seal
・ Adjustable Inlet
・ Includes 12" length of 32mm OD CP Brass Waste Pipe and Wall Flange
・ Requires MS4-32SOLVENT fitting to convert to 1¼" UK pipe size
The McAlpine TA32VUK-CB trap is a plumbing component that is designed to prevent the backflow of foul gases from the drainage system into the room. It has a 50mm water seal and an anti-siphon feature, which ensures that the trap remains full of water, preventing any foul odors from escaping into the room.
The trap comes with a 12" length of 32mm diameter chrome-plated brass waste pipe, which is used to connect the trap to the drainage system. The chrome plating on the waste pipe not only gives it an attractive finish but also makes it resistant to corrosion and easy to clean.
The trap is adjustable, allowing it to be set to the required height, and it comes with a wall flange, which provides a neat and secure fixing to the wall.
Overall, the McAlpine TA32VUK-CB trap is a reliable and durable component that is designed to meet the requirements of modern plumbing systems.
・ 32mm European Outlet
・ 50mm Water Seal
・ Adjustable Inlet
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
・ Includes 12" length of 32mm OD CP Brass Waste Pipe and Wall Flange
The McAlpine TSG1SS-SL-SC 75mm Water Seal Trapped Gully is a plumbing fixture used in drainage systems. It is designed to prevent foul air or gases from escaping through the drainage system and into living spaces.
The gully features a 75mm water seal, which provides a barrier between the drainage system and the living space. The water seal prevents any gases or smells from the drainage system from entering the living space. The trapped gully also has a 2" horizontal outlet, which connects to the drainage pipe.
The gully comes with a clamp ring and cover plate, which are used to secure the gully in place and provide a finished look. The cover plate can be easily removed for cleaning and maintenance.
Additionally, the McAlpine TSG1SS-SL-SC gully comes with a 2" x 1½" socket reducer. The reducer can be used to connect the gully to a smaller diameter pipe or fitting, allowing for greater flexibility in plumbing installations.
Overall, the McAlpine TSG1SS-SL-SC 75mm Water Seal Trapped Gully is a reliable and effective plumbing fixture that can be used in a variety of drainage systems.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG1-T150SS 75mm Water Seal Trapped Gully is a plumbing component designed for use in drainage systems. It features a removable grid that can be easily taken out for cleaning, and is suitable for use with tiles or gratings. The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, allowing for easy installation with compatible pipes.
The water seal in the gully prevents foul odors from escaping into the air, making it an important component in any plumbing system. The trapped gully is typically installed in areas where there is a risk of water collecting, such as in showers, wet rooms, or other areas where water is likely to accumulate.
The McAlpine TSG1-T150SS 75mm Water Seal Trapped Gully is made from high-quality materials, ensuring that it is durable and long-lasting. It is designed to meet all relevant plumbing standards, ensuring that it is safe and reliable to use in a wide range of applications.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG2SS-SL-NSC 75mm Water Seal Trapped Gully is a plumbing fixture used to prevent sewer gases and unpleasant odors from entering a building. It features a 75mm water seal that traps water in the gully and prevents the backflow of sewage.
The gully comes with a clamp ring and cover plate that secure it in place and provide a neat and tidy finish. The cover plate is removable, allowing for easy access to the gully for cleaning and maintenance.
The gully has a 110mm or 2" vertical solvent spigot outlet, which can be connected to a soil pipe or a drainage system. It is made from high-quality stainless steel, ensuring its durability and longevity.
Overall, the McAlpine TSG2SS-SL-NSC 75mm Water Seal Trapped Gully is an essential plumbing fixture that helps to maintain a hygienic and healthy environment in buildings.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 110mm Vertical Outlet
・ Supplied with110mm x 2" BS EN 1329-1:2000 solvent spigot outlet
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is a plumbing fixture designed for use in drainage systems. It features a clamp ring and cover plate for secure installation, and a 110mm or 2" vertical solvent spigot outlet for connection to other plumbing components.
The water seal trapped gully is an essential part of a drainage system as it helps prevent foul odours and gases from entering the building by trapping water in the gully. The trapped water creates a seal that stops gases from flowing back into the property. The trapped gully is usually installed in the floor to collect wastewater and prevent blockages in the drain system.
The McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is made of stainless steel, which provides excellent corrosion resistance and durability. The clamp ring and cover plate ensure a secure fit, and the 110mm or 2" vertical solvent spigot outlet allows for easy connection to other plumbing components.
Overall, the McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is a reliable and effective solution for drainage systems, particularly in commercial or industrial applications where durability and reliability are critical.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 110mm Vertical Outlet
・ Supplied with110mm x 2" BS EN 1329-1:2000 solvent spigot outlet
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50SS-SL-SC 50mm Water Seal Trapped Gully is a plumbing component used in drainage systems to prevent odors and gases from entering the living or working space. It is designed with a 50mm water seal trap that blocks foul smells and provides a barrier against sewer gases. The trap also stops debris and other materials from entering the drain system.
The gully is equipped with a clamp ring and cover plate that secures the gully in place and provides access for maintenance and cleaning. The horizontal outlet measures 2 inches in diameter, while the socket reducer measures 2 inches by 1 1/2 inches, making it suitable for use in a range of drainage systems.
This type of gully is commonly used in commercial and industrial applications, as well as in residential settings where a higher level of protection against odors and gases is required. The McAlpine TSG50SS-SL-SC gully is made from high-quality materials to ensure durability and long-lasting performance.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52-ANTI/LIG is a two-piece trapped gully that is designed for use in plumbing systems to prevent foul odors and gases from entering the building. It has a 50mm water seal that helps to maintain the water level in the trap and prevent odors from escaping through the drain.
The gully comes with a clamp ring and cover plate that can be easily removed for cleaning and maintenance purposes. It has a 2" horizontal outlet that is compatible with standard PVC pipework and a 2" x 1½" socket reducer that can be used to connect the gully to a range of different pipe sizes.
Overall, the McAlpine TSG52-ANTI/LIG is a reliable and durable option for anyone looking for a trapped gully to use in their plumbing system. Its anti-syphon design ensures that foul odors and gases are prevented from entering the building, while its easy-to-clean design makes it simple to maintain and keep in good condition.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52T6SS is a two-piece water seal trapped gully that is designed to be used with tiles or gratings. It has a removable grid that allows for easy cleaning and maintenance. The gully has a 50mm water seal to prevent foul odours and gases from escaping into the room.
The gully has a 2" horizontal outlet and comes with a 2" x 1½" socket reducer, which allows for easy connection to a variety of pipes. The gully is made from durable materials and is designed to withstand heavy use and frequent cleaning.
Overall, the McAlpine TSG52T6SS is a reliable and efficient solution for drainage in a variety of settings, including kitchens, bathrooms, and utility rooms.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52WH is a two-piece 50mm water seal trapped gully that is designed to be used in plumbing systems for waste water and sewage. The gully features a clamp ring and cover plate for secure installation, and a 2" horizontal outlet with a 2" x 1½" socket reducer for easy connection to other plumbing components.
The water seal trap is an essential feature of the gully, as it prevents unpleasant odours and gases from escaping through the drainage system and entering the living or working area. The trap works by retaining a small amount of water in the trap, which forms a barrier to the gases and odours.
The clamp ring and cover plate ensure that the gully is securely fixed in place, preventing any leaks or movement. The 2" horizontal outlet and 2" x 1½" socket reducer allow for easy connection to other plumbing components, such as pipes and fittings.
Overall, the McAlpine TSG52WH is a reliable and durable solution for waste water and sewage drainage systems, and is suitable for both commercial and domestic use.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
McAlpine 1 1/2" In-Line Screened/Filter Pipe Coupling is a plumbing fitting used to connect two pipes of the same size. The coupling is made of plastic and includes a built-in filter screen to prevent debris from entering the pipes. This is particularly useful in applications where the pipes are carrying liquids that may contain small particles or solids that could clog or damage the pipes or downstream equipment.
The coupling is designed to be inserted into the pipe ends and secured with standard pipe fittings, such as compression or solvent weld fittings. The screened filter helps to prevent blockages and ensures the smooth flow of liquids through the pipes.
McAlpine is a well-known brand in the plumbing industry, and their products are known for their high quality and reliability. The 1 1/2" In-Line Screened/Filter Pipe Coupling is a popular choice for a variety of plumbing applications, including drainage and waste systems, as well as HVAC and industrial applications.
・ Available in ¾", 1", 1¼", 1½" and 2" sizes
The McAlpine USG1WH Untrapped Gully is a plumbing component designed to be used with pumped waste systems. It features a 22mm horizontal plain outlet and includes both a clamp ring and a cover plate.
The gully is untrapped, which means it does not have a water seal that prevents foul odors and gases from escaping back into the room. This makes it unsuitable for use in certain situations, such as where there is a risk of backflow from the drain system.
However, the USG1WH gully is designed specifically for use with pumped waste systems, which typically operate at a higher pressure and are less prone to backflow. In these systems, the pump provides the necessary pressure to push waste water through the drainage system and out of the building.
Overall, the McAlpine USG1WH Untrapped Gully is a specialized plumbing component that is suitable for use in certain applications where a pumped waste system is in use. As always, it's important to consult with a qualified plumbing professional to determine whether this component is appropriate for your specific needs.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine TWLFBR ¾" Screened Tank Breather is a plumbing component designed to prevent pressure build-up in a water tank or cistern. It features a ¾" BSP male thread for easy installation and a screened air inlet to prevent debris from entering the tank.
The purpose of the tank breather is to allow air to enter and exit the tank, which helps maintain a consistent pressure inside the tank. This is particularly important in larger water storage systems, where pressure changes can cause damage to the tank or affect the quality of the water inside.
The McAlpine TWLFBR ¾" Screened Tank Breather is made from durable materials, including brass and plastic, to ensure long-lasting performance. It is suitable for use in both domestic and commercial plumbing systems and can be installed either horizontally or vertically.
・ Available in ¾", 1¼", 1½" and 2" sizes
・ WRAS approved
The McAlpine WU1A 1¼" Urinal Waste is a plumbing fitting used to connect a urinal to the waste pipe. It has a 60mm flush flange that fits into the urinal outlet and a 3½" tail with a backnut that connects to the waste pipe.
Here is a breakdown of the components:
1¼" refers to the diameter of the waste outlet that fits into the urinal.
60mm flush flange is the part that sits inside the urinal outlet and creates a seal to prevent leaks.
3½" tail is the part that extends from the flush flange and connects to the waste pipe.
Backnut is the threaded cap that secures the tail to the waste pipe.
Overall, the McAlpine WU1A is designed to provide a secure and leak-free connection between a urinal and the waste pipe.
・ Available with Chrome Plated Plastic or white plastic tail
・ 1¼" BSP
・ 60mm Flush Flange
・ 3½" Tail
・ Manufactured in Polypropylene
